{"aaData": [["1", "ADVERSE REACTIONS/ALLERGIES", "
ALLRG;GMTSALG
\n", "", "", "", "", "", "", "", "
ADR
\n", "
\nThis component provides patient allergy/adverse reaction information from\nthe Allergy Tracking System. It provides a list of all known food, drug\nand environmental allergies or adverse reactions (e.g., hay fever). Data\nelement included are type of reaction, mechanism of reaction, causative\nagent, verification status, signs/symptoms for the reaction, the\noriginator, and comments.\n
\n
\n", "", "", "", "", "", "
Adv React/Allerg
\n"], ["10", "MAS ADMISSIONS/DISCHARGES", "
ENAD;GMTSDGA
\n", "", "", "", "", "", "", "
yes
\n", "
ADC
\n", "
\nThis component contains information from the MAS package.  Time and\noccurrence limits apply to this component.  Data presented include:\ndate range of admission, ward, length of stay (LOS), last treating \nspecialty, last provider, admitting diagnosis text, bedsection, principal\ndiagnosis, diagnosis for longest length of stay (DXLS), and secondary\nICD diagnoses.\n
\n
\n", "
yes
\n", "", "", "", "", "
Admission/Discharge
\n"], ["11", "MAS DISCHARGE DIAGNOSIS", "
ENDX;GMTSDGA
\n", "", "", "", "", "", "", "
yes
\n", "
DD
\n", "
\nThis component contains information extracted from the MAS package. Time\nand occurrence limits apply to this component.  Data presented include:\nDate range of admission through discharge, length of stay (LOS), Principal\ndiagnosis, diagnosis for longest length of stay (DXLS), and secondary ICD\ndischarge diagnoses.\n  \nNote: This component provides discharge diagnoses coded in the MAS PTF\nfile. The occurrence limits are determined by the occurrence of\nadmissions.\n
\n
\n", "
yes
\n", "", "", "", "", "
Discharge Diagnosis
\n"], ["12", "MAS SURGERIES ICD CODES", "
ENS;GMTSDGP
\n", "", "", "", "", "", "", "
yes
\n", "
OPC
\n", "
\nThis component contains MAS coded surgeries, by admission, extracted from\nthe MAS package.  Time and occurrence limits apply to this component.\nData presented include:  surgery date, procedure name, and ICD-9CM procedure\ncodes.\n  \nNote: The occurrence limits are determined by the occurrence of admissions.\n
\n
\n", "
yes
\n", "", "", "", "", "
ICD Surgeries
\n"], ["14", "MAS CLINIC VISITS PAST", "
PAST;GMTSDA
\n", "", "", "", "", "", "", "
yes
\n", "
CVP
\n", "
\nThis component contains information from the MAS scheduling module.\nTime and occurrence limits apply to this component.  Data presented\ninclude:  past clinic visits, dates, and a visit status (e.g., NO SHOW,\nINPATIENT VISIT).  Note: Cancellations and Unscheduled Visits are shown.\n
\n
\n", "
yes
\n", "", "", "", "", "
Past Clinic Visits
\n"], ["15", "PROGRESS NOTES", "
PN;GMTSPN
\n", "", "", "", "", "", "", "
yes
\n", "
PN
\n", "
\nThis component contains progress notes entered using the Text Integration \nUtilities (TIU) and Mental Health packages.  Time and maximum occurrence \nlimits apply to this component.  Data presented include:  Progress note \ndate/time written, title, text of note, electronic signature block \n(including possible cosignature and cosigner comments), and the note's\ncorrection text and correction date/time.\n    \nOnly those notes which have been signed with an electronic signature\nor electronically marked signed on chart will be reported.\n
\n
\n", "
yes
\n", "", "", "", "", "
Progress Notes
\n"], ["16", "MAS TRANSFERS", "
ENTR;GMTSDGA
\n", "", "", "", "", "", "", "
yes
\n", "
TR
\n", "
\nThis component contains information extracted from the MAS package.\nTime and occurrence limits apply to this component.  Data presented\ninclude:  transfer date, type, destination, and provider (when available).\n  \nNote: The occurrence limits are determined by the occurrence of admissions.\n
\n
\n", "
yes
\n", "", "", "", "", "
Transfers
\n"], ["17", "MAS TREATING SPECIALTY", "
ENTS;GMTSDGA
\n", "", "", "", "", "", "", "
yes
\n", "
TS
\n", "
\nThis component contains information extracted from the MAS package.\nTime and occurrence limits apply to this component.  Data presented\ninclude:  treating specialty change date/time, new treating specialty,\n(admission date), and provider.\n \nNote: The occurrence limits are determined by the occurrence of admissions.\n
\n
\n", "
yes
\n", "", "", "", "", "
Treating Specialty
\n"], ["18", "LAB CUMULATIVE SELECTED 1", "
MAIN;GMTSLRS7
\n", "", "", "", "", "", "", "
yes
\n", "
SCL1
\n", "
\nThis component contains information extracted from the Lab package. Not\nwith comments being linked by the lower case letter. Up to 26 comments can\nbe included.\nonly do time and maximum occurrence limits apply to this component, but\nthe user is allowed to select as many as seven atomic Lab tests. Data\npresented include: collection date/time, specimen, test names with results\nand reference flags in columnar (horizontal) format. Comments will also be\nconditionally displayed, depending on the value of the DISPLAY COMMENTS ON\nLABS Health Summary Site Parameter. When comments are displayed, a lower\ncase letter will be displayed to the left of the date for entries with\ncomments. Comments will be displayed after all the results are displayed\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Lab Cum Selected 1
\n"], ["19", "LAB CUMULATIVE SELECTED 2", "
MAIN;GMTSLRS7
\n", "
\n
\n\n
\n", "", "", "", "
LR
\n", "", "
yes
\n", "
SCL2
\n", "
\nThis component contains information extracted from the Lab package. Not\nwith comments being linked by the lower case letter. Up to 26 comments can\nbe included.\nonly do time and maximum occurrence limits apply to this component, but\nthe user is allowed to select as many as seven atomic Lab tests. Data\npresented include: collection date/time, specimen, test names with results\nand reference flags in columnar (horizontal) format. Comments will also be\nconditionally displayed, depending on the value of the DISPLAY COMMENTS ON\nLABS Health Summary Site Parameter. When comments are displayed, a lower\ncase letter will be displayed to the left of the date for entries with\ncomments. Comments will be displayed after all the results are displayed\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Lab Cum Selected 2
\n"], ["2", "MAS DEMOGRAPHICS BRIEF", "
DEMOG;GMTSDEMB
\n", "", "", "", "", "", "", "", "
BDEM
\n", "
\nThis component contains information from the MAS package.  It \nprovides brief patient demographic information including: address,\nphone number, age, sex, race, ethnicity, mean test, and eligibility\ncode (e.g., service connected 50-100%).\n
\n
\n", "", "", "", "", "", "
Brief Demographics
\n"], ["20", "LAB CUMULATIVE SELECTED 3", "
MAIN;GMTSLRS7
\n", "", "", "", "", "", "", "
yes
\n", "
SCL3
\n", "
\nThis component contains information extracted from the Lab package. Not\nwith comments being linked by the lower case letter. Up to 26 comments can\nbe included.\nonly do time and maximum occurrence limits apply to this component, but\nthe user is allowed to select as many as seven atomic Lab tests. Data\npresented include: collection date/time, specimen, test names with results\nand reference flags in columnar (horizontal) format. Comments will also be\nconditionally displayed, depending on the value of the DISPLAY COMMENTS ON\nLABS Health Summary Site Parameter. When comments are displayed, a lower\ncase letter will be displayed to the left of the date for entries with\ncomments. Comments will be displayed after all the results are displayed\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Lab Cum Selected 3
\n"], ["201", "PCE LOCATION OF HOME", "
HOMELOC;GMTSPXHP
\n", "", "", "", "", "", "", "", "
LH
\n", "
\nThis component lists directions to a particular patient's home.\n
\n
\n", "", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Location of Home
\n"], ["202", "CLINICAL REMINDERS DUE", "
MAIN;GMTSPXHR
\n", "", "", "", "", "", "", "", "
CR
\n", "
\nThis component lists only clinical reminders that are due now. If the\ndate the reminder was last satisfied is known it is listed under LAST.\nOtherwise the word unknown is printed.\n
\n
\n", "", "", "", "
\n
\n\n
\n", "
...
\n", "
Reminders Due
\n"], ["203", "PCE HEALTH FACTORS SELECTED", "
HFSEL;GMTSPXFP
\n", "
\n
\n\n
\n", "", "", "", "
PX
\n", "", "
yes
\n", "
SHF
\n", "
\nThis component allows a user to create a list of factor health factors\n\nNote: Health Factors have a DISPLAY ON HEALTH SUMMARY \noption that determines whether or not they will show on a Health Summary \nreport.\n\nand/or category health factors. For category health factors, all factor\nhealth factors in the category are put on the list. It then lists all\nthe factor health factors, which apply to a particular patient for\nuser-specified time and occurrence limits.\n \nSet the occurrence limit to 1 to list the latest unique health factors\nfor each selected category. (E.g. If there were 12 "Non-Smoker" health\nfactor entries, only the latest "Non-Smoker" entry would display.\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Health Factor Select
\n"], ["204", "PCE HEALTH FACTORS ALL", "
HFACT;GMTSPXFP
\n", "", "", "", "", "", "", "
yes
\n", "
HF
\n", "
\nThis component lists all the health factors associated with a particular\n\nNote: Health Factors have a DISPLAY ON HEALTH SUMMARY \noption that determines whether or not they will show on a Health Summary \nreport.\npatient for user-specified time and occurrence limits. The list will\ndisplay health factors by category and include a level of severity for\neach health factor including Minimal(M), Moderate(MO), and\nHeavy/Severe(H).\n \nSet the occurrence limit to 1 to list the latest unique health factors\nwithin each category.  (E.g. If there were 12 "Non-Smoker" health factor\nentries, only the latest "Non-Smoker" entry would display.)\n
\n
\n", "
yes
\n", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Health Factors
\n"], ["205", "PCE OUTPATIENT ENCOUNTERS", "
OUTPT;GMTSPXOP
\n", "", "
yes
\n", "
yes
\n", "
yes
\n", "", "
YES
\n", "
yes
\n", "
OE
\n", "
\nThis component lists outpatient diagnosis (ICD-9) and procedure (CPT) for a\nparticular patient. The user can specify item and occurrence limits,\nwhether hospital location should be displayed or not, the format of ICD-9\ndata (e.g. code only, long text, short text or no ICD-9 data), and whether\nthe provider narrative should be displayed or not.\n
\n
\n", "
yes
\n", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Outpatient Encounter
\n"], ["207", "PCE IMMUNIZATIONS", "
IMMUN;GMTSPXIM
\n", "", "", "", "", "", "", "", "
IM
\n", "
\nThis component lists the immunizations (e.g., Rubella, Smallpox,\netc.) and information about each immunization administered to a\nparticular patient.\n
\n
\n", "", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Immunizations
\n"], ["208", "PCE SKIN TESTS", "
SKIN;GMTSPXSK
\n", "", "", "", "", "", "", "", "
ST
\n", "
\nThis component lists the skin tests and the results (e.g. positive,\nnegative, doubtful, or no take) for a particular patient. Some examples of\nskin tests are cocci, mon-vac, PPD, schick, tine, etc.\n
\n
\n", "", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Skin Tests
\n"], ["21", "LAB CUMULATIVE SELECTED 4", "
MAIN;GMTSLRS7
\n", "", "", "", "", "", "", "
yes
\n", "
SCL4
\n", "
\nThis component contains information extracted from the Lab package. Not\nwith comments being linked by the lower case letter. Up to 26 comments can\nbe included.\nonly do time and maximum occurrence limits apply to this component, but\nthe user is allowed to select as many as seven atomic Lab tests. Data\npresented include: collection date/time, specimen, test names with results\nand reference flags in columnar (horizontal) format. Comments will also be\nconditionally displayed, depending on the value of the DISPLAY COMMENTS ON\nLABS Health Summary Site Parameter. When comments are displayed, a lower\ncase letter will be displayed to the left of the date for entries with\ncomments. Comments will be displayed after all the results are displayed\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Lab Cum Selected 4
\n"], ["212", "PCE EDUCATION", "
PTED;GMTSPXEP
\n", "", "", "", "", "", "", "
yes
\n", "
ED
\n", "
\nThis component lists the patient education topics and a brief assessment\nof the patient's understanding of the topic for a particular patient for\nuser-specified time and occurrence limits. Some examples of topics are\ncomplications, diet, disease process, exercise, follow-up care, general\ninformation, lifestyle adaptations, medications, nutrition, smoking,\netc.\n
\n
\n", "
yes
\n", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Education
\n"], ["213", "PCE EDUCATION LATEST", "
MRPTED;GMTSPXEP
\n", "", "", "", "", "", "", "
yes
\n", "
EDL
\n", "
\nThis component lists the latest patient education for each topic and a\nbrief assessment of the patient's understanding of the topic for a\nparticular patient for a user-specified time limit. Some examples of\ntopics are complications, diet, disease process, exercise, follow-up care,\ngeneral information, lifestyle adaptations, medications, nutrition,\nsmoking, etc.\n
\n
\n", "", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Education Latest
\n"], ["218", "PCE IMMUNIZATIONS DETAILED", "
IMMUND;GMTSPXIM
\n", "", "", "", "", "", "", "", "
DIM
\n", "
\nThis component lists the immunizations (e.g., Rubella, Smallpox,\netc.) and information about each immunization administered to a\nparticular patient in detail. Data are sorted in alphabetical order by\nimmunization name and then by administration date in reverse chronological\norder. Data are presented in a Fileman captioned style and include\nimmunization name, full name, series, administration date, facility,\nreaction, contraindications, manufacturer, lot number, expiration date,\ndosage, administration route, administration site, vaccine information\nstatements offered to the patient, administered by and comments.\n
\n
\n", "", "", "", "", "", "
Immunizations Detail
\n"], ["219", "PCE IMMUNIZATIONS SELECTED", "
IMMUN;GMTSPXIM
\n", "", "", "", "", "", "", "
yes
\n", "
SIM
\n", "
\nThis component lists the immunizations (e.g., Rubella, Smallpox,\ncontraindication, the record is marked with a '<**>'. The name of the\nimmunization, date of administration and reaction/contraindications are\ndisplayed at the end of the display. If the record has a comment it is\nmarked with a '<C>'. Comments can be viewed in the Detailed Immunizations\nHealth Summary component. \netc.) and information about each immunization administered to a particular\npatient. Time and maximum occurrence limits apply, and the user is allowed\nto select any number of the immunizations defined in the Immunization\n(#9999999.14) file. The user may select a time limit up to 99 years and\n999 maximum occurrences. Data are displayed in alphabetical order by\nimmunization name and then by administration date in reverse \nchronological order. Data presented include immunization name, series,\nadministration date and facility. If there is a reaction and/or\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Immunizations Select
\n"], ["220", "PCE OUTPATIENT DIAGNOSIS", "
PURPOSE;GMTSPXOP
\n", "", "
yes
\n", "
yes
\n", "
yes
\n", "", "", "
yes
\n", "
OD
\n", "
\nThis component lists outpatient diagnosis (ICD-9) for a particular patient.\nThe user can specify time and occurrence limits, whether hospital location\nshould be displayed or not, the format of ICD-9 data (e.g. code only, long\ntext, short text or no ICD-9 data), and whether the provider narrative\nshould be displayed or not.\n
\n
\n", "
yes
\n", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Outpatient Diagnosis
\n"], ["221", "PCE IMMUNIZATIONS SELECT CHRON", "
IMMUNCDT;GMTSPXIM
\n", "", "", "", "", "", "", "
yes
\n", "
SIMC
\n", "
\nThis component lists the immunizations (e.g., Rubella, Smallpox, etc.) and\nmarked with a '<**>'. The name of the immunization, date of administration\nand reaction/contraindications are displayed at the end of the display. If\nthe record has a comment it is marked with a '<C>'. Comments can be viewed\nin the Detailed Immunizations Health Summary component.\ninformation about each immunization administered to a particular patient.\nTime and maximum occurrence limits apply, and the user is allowed to\nselect any number of the immunizations defined in the Immunization\n(#9999999.14) file. The user may select a time limit up to 99 years and\n999 maximum occurrences. Data are displayed by administration date in\nchronological order and then alphabetically by immunization name. Data\npresented include immunization name, series, administration date and\nfacility. If there is a reaction and/or contraindication, the record is\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Immun Select Old>New
\n"], ["222", "PCE IMMUN SELECT REVERSE CHRON", "
IMMUNRDT;GMTSPXIM
\n", "", "", "", "", "", "", "
yes
\n", "
SIMR
\n", "
\nThis component lists the immunizations (e.g., Rubella, Smallpox, etc.) and\nmarked with a '<**>'. The name of the immunization, date of administration\nand reaction/contraindications are displayed at the end of the display. If\nthe record has a comment it is marked with a <C>. Comments can be viewed\nin the Detailed Immunizations Health Summary component.\ninformation about each immunization administered to a particular patient.\nTime and maximum occurrence limits apply, and the user is allowed to\nselect any of the immunizations defined in the Immunization (#9999999.14)\nfile. The user may select a time limit up to 99 years and 999 maximum\noccurrences. Data are displayed by administration date in reverse\nchronological order and then alphabetically by immunization name. Data\npresented include immunization name, series, administration date and\nfacility. If there is a reaction and/or contraindication, the record is\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Immun Select New>Old
\n"], ["23", "SURGERY REPORTS", "
ENSR;GMTSRO
\n", "", "", "", "", "", "
YES
\n", "
yes
\n", "
SR
\n", "
\nThis component contains information from the Surgery package.  Time and\n \nFor NON-OR procedures the data presented will be: provider specialty,\nprovider, procedure status, attending, principal diagnosis, procedures\nperformed, principal anesthesiologist, and indications for procedure.\nmaximum occurrence limits apply.  It includes NON-OR procedures as well as \nSurgical procedures.  The data returned will differ for surgical and \nNON-OR procedures.\n \nFor Surgical procedures the data presented will be: surgery date,\nsurgeon, surgery report status, pre-operative diagnosis, post-operative\ndiagnosis, surgeon's dictation, current procedural terminology operation\ncode and text, and principal anesthesiologist.\n
\n
\n", "
yes
\n", "", "", "", "
Surgery Package not yet installed
\n", "
Surgery Rpt (OR/NON)
\n"], ["230", "PCE EXAMS LATEST", "
MRE;GMTSPXXP
\n", "
\n
\n\n
\n", "", "", "", "
PX
\n", "", "
yes
\n", "
EXAM
\n", "
\nThis component lists the latest examination information and results for a\nparticular patient for a user-specified time limit. Some examples of exam\ntypes are eye exams, ear exams, neurological exams, pelvis exams, etc.\n
\n
\n", "", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Exams Latest
\n"], ["231", "PCE TREATMENTS PROVIDED", "
TRTMT;GMTSPXTP
\n", "", "", "", "", "", "", "
yes
\n", "
TP
\n", "
\nThis component lists treatments provided that are not covered in the\nIDC-9-CM procedures for a particular patient for user specified time and\noccurrence limits. Some example of treatment types include nursing\nactivities such as ear irrigation, dental care instructions, or preventive\nhealth care counseling.\n
\n
\n", "
yes
\n", "", "", "", "
Patient Care Encounter Package not yet installed
\n", "
Treatments Provided
\n"], ["232", "CLINICAL REMINDERS MAINTENANCE", "
MAIN;GMTSPXHR
\n", "", "", "", "", "", "", "", "
CM
\n", "
\nThis component lists reminders that are due and not due as does the CRS\ncomponent. In addition it shows why the reminder is due or not due.\n
\n
\n", "", "", "", "
\n
\n\n
\n", "", "
Reminder Maintenance
\n"], ["233", "PROGRESS NOTES SELECTED", "
MAIN;GMTSPNSL
\n", "", "", "", "", "", "", "
yes
\n", "
SPN
\n", "
\nThis component allows for the selection of specific progress notes by \ndocument title.  These progress notes were entered using the Text Integration\nUtilities (TIU).  Data presented include:  Progress note date/time written, \ntitle, text of note, electronic signature block (including possible \ncosignature and cosigner comments), and the note's correction text and \ncorrection date/time.\n      \nOnly those notes which have been signed with an electronic signature or \nelectronically marked signed on chart will be reported.\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Selected Prog Notes
\n"], ["234", "CLINICAL REMINDERS SUMMARY", "
MAIN;GMTSPXHR
\n", "", "", "", "", "", "", "", "
CRS
\n", "
\nThis component is similar to PCE CLINICAL REMINDERS DUE except that it \nshows all reminders, not just those that are due. The information will \ninclude the NEXT due date, or N/A, and the LAST DATE. N/A reminders \nwill be displayed unless the IGNORE ON N/A field is set.\n
\n
\n", "", "", "", "
\n
\n\n
\n", "", "
Reminders Summary
\n"], ["235", "MAG IMAGING", "
MAIN;GMTSMAG
\n", "", "", "", "", "", "", "
yes
\n", "
MAGI
\n", "
\nThis component lists the available images along with\nthe procedure name and short description.\n
\n
\n", "
yes
\n", "", "", "", "", "
MAG Imaging
\n"], ["236", "ONCOLOGY", "
EXTRACT;GMTSONE
\n", "", "", "", "", "", "", "", "
ONC
\n", "
\nThis component will extract selected data items from the\nONCOLOGY PRIMARY file.  \n
\n
\n", "", "", "", "", "", "
Oncology
\n"], ["237", "VITAL SIGNS DETAILED DISPLAY", "
EN;GMTSVSD
\n", "
\n
\n\n
\n", "", "", "", "
GMRV
\n", "", "
yes
\n", "
VSD
\n", "
\nThis component contains vital measurements extracted from the Vital Signs\nmodule, and differs from other Health Summary Vital Signs displays by\nincluding the Vital Signs Qualifiers (sitting,standing, left arm, etc.)\nwith the vitals measurement.  Time and maximum occurrence limits apply.\nData presented includes measurement date and time, temperature, blood\npressure, pulse, height, weight, respiratory rate,CVP, PO2, circumference\nand girth, and pain.\n
\n
\n", "
yes
\n", "", "", "", "", "
Detailed Vitals
\n"], ["238", "GLOBAL ASSESSMENT FUNCTIONING", "
EN;GMTSGAF
\n", "
\n
\n\n
\n", "", "", "", "
YS
\n", "", "
yes
\n", "
GAF
\n", "
\nThis component displays the GAF score taken from the Global Assessment\nFunctioning scale to evaluate the psychological,social, and occupational\nfunctioning on a hypothetical continuum of mental health/illness.  Also\ndisplayed is the date of the assessment and the name of the health care\nprofessional who provided the assessment.\n
\n
\n", "
yes
\n", "", "", "", "", "
Global Assess Funct
\n"], ["239", "CLINICAL REMINDERS BRIEF", "
MAIN;GMTSPXHR
\n", "
\n
\n\n
\n", "", "", "", "", "", "", "
CMB
\n", "
\nThis is a brief version of the CLINICAL REMINDERS MAINTENANCE component.\n
\n
\n", "", "", "", "
\n
\n\n
\n", "", "
Reminder Brief
\n"], ["24", "MAS DISABILITIES", "
MAIN;GMTSDGD
\n", "", "", "", "", "", "", "", "
DS
\n", "
\nThis component provides information from the MAS package about a patient's\neligibility code and eligibility status (Verified), and rated disabilities,\nincluding the disability percentage and whether the disability is service\nconnected or non-service connected.\n
\n
\n", "", "", "", "", "", "
Disabilities
\n"], ["240", "CONSULTS BRIEF", "
MAIN;GMTSCNB
\n", "
\n
\n\n
\n", "", "", "", "
GMRC
\n", "", "
yes
\n", "
CNB
\n", "
\nThis component displays Consults in a brief format, to include the consult \nnumber, request date, requesting service, last action, clinically indicated \ndate, last action date, and the consult "TO" service.\n
\n
\n", "
yes
\n", "", "", "", "", "
Brief Consults
\n"], ["242", "NEXT OF KIN", "
NOKC;GMTSDEM2
\n", "
\n
\n\n
\n", "", "", "", "
DG
\n", "", "", "
NOK
\n", "
\nDisplays the name, relation, address, phone number of the Next of Kin.  If\na Secondary Next of Kin exist, then it will be printed too.\n
\n
\n", "", "", "", "", "", "
Next of Kin
\n"], ["243", "NON VA MEDICATIONS", "
MAIN;GMTSPSHO
\n", "
\n
\n\n
\n", "", "", "", "
PS
\n", "", "
yes
\n", "
RXNV
\n", "
\nThis component displays the non-VA medications taken or\nreported as used by a patient.\n
\n
\n", "
yes
\n", "", "", "", "", "
Non VA Meds
\n"], ["244", "GEC Health Factor Category", "
HFSEL;GMTSPXFP
\n", "
\n
\n\n
\n", "", "", "", "
GEC
\n", "", "
yes
\n", "
GECH
\n", "", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Referral Categories
\n"], ["245", "GEC Completed Referral Count", "
PRINT;GMTSGEC
\n", "", "", "", "", "", "", "
yes
\n", "
GECC
\n", "", "
yes
\n", "", "", "", "", "
Referral Count
\n"], ["246", "MHV REMINDERS DETAIL DISPLAY", "
MAIN;GMTSPXHR
\n", "", "", "", "", "", "", "", "
MHVD
\n", "
\nThis component display the detail description of all Clinical Reminders that \nare define for MyHealtheVet. \n
\n
\n", "", "", "", "", "", "
Detail Display
\n"], ["247", "MHV REMINDERS SUMMARY DISPLAY", "
MAIN;GMTSPXHR
\n", "", "", "", "", "", "", "", "
MHVS
\n", "
\nThis component display the summary description of all Clinical Reminders \nthat are define for HealtheVet.\n
\n
\n", "", "", "", "", "", "
Summary Display
\n"], ["248", "MHA Administration List", "
EN;GMTSYTQL
\n", "", "", "", "", "
YS
\n", "", "", "
MHAL
\n", "
\nThis component displays all administrations of instruments in\nthe mental health package for the specified patient. All administrations from \nMH Administrations (file #601.84) are shown.\n\nDate ranges and maximum occurrences apply.\n
\n
\n", "", "", "", "", "", "
MHA Admin List
\n"], ["249", "MHA Score", "
EN;GMTSYTQS
\n", "", "", "", "", "
YS
\n", "", "", "
MHAS
\n", "
\nThis component displays the administration and scoring of \ninstruments in the mental health package. Tests, interviews and surveys from MH\nTESTS and SURVEYS (file # 601.71) must be selected.\n\nDate ranges and maximum occurrences apply.\n
\n
\n", "", "", "", "
\n
\n\n
\n", "", "
MHA Score
\n"], ["25", "ADVANCE DIRECTIVE", "
CD;GMTSCW
\n", "", "", "", "", "", "", "", "
CD
\n", "
\nThis component contains advance directive notes entered using the Text\nIntegration Utilities (TIU).  Advance Directives are a type a progress \nnote which includes clinical information that clinicians need to be \nalerted to.  Time and maximum occurrent limits apply to this\ncomponent.\n    \nIf this component is printed to either a CRT or another device type,\ninformation will include title, text of note, electronic signature block,\nand date/time posted.\n
\n
\n", "", "", "", "", "", "
Advance Directive
\n"], ["250", "CLINICAL REMINDERS FINDINGS", "
MAIN;GMTSPXHR
\n", "
\n
\n\n
\n", "", "", "", "", "", "", "
CF
\n", "
\nThis component lists reminders findings for reminders that are due and not\ndue as does the CRS component.\n\n
\n
\n", "", "", "", "
\n
\n\n
\n", "", "
Reminders Findings
\n"], ["251", "CLINICAL REMINDERS LAST DONE", "
MAIN;GMTSPXHR
\n", "
\n
\n\n
\n", "", "", "", "", "", "", "
CLD
\n", "
\nThis component shows reminders with the Last Done Date if it is defined.\n\n
\n
\n", "", "", "", "
\n
\n\n
\n", "", "
Reminders Last Done
\n"], ["252", "Medication Worksheet (Tool #2)", "
TOOL2;GMTSPST2
\n", "", "", "", "", "", "", "", "
MRT2
\n", "
\nThis component displays a list of the patient's active and pending\noutpatient prescriptions in a patient-friendly worksheet format with space\nintended for written notes by the patient, provider or caregiver.\n
\n
\n", "", "", "", "", "", "
Medication Worksheet
\n"], ["253", "MAS CONTACTS", "
PRINT;GMTSMHCI
\n", "", "", "", "", "", "", "", "
CON
\n", "
\nThis component lists (if available) the following patient contact information:\nPatient Phone (Cell, Home, Work)\nName, Relationship, and Phone Number of the:\nEmergency Contact, Secondary Emergency Contact, and Secondary NOK Contact\n
\n
\n", "", "", "", "", "", "
Patient Contacts
\n"], ["254", "MAS MH CLINIC VISITS FUTURE", "
EN;GMTSMHAP
\n", "", "", "", "", "", "", "", "
MHFV
\n", "
\nThis component displays the next scheduled appointment(s) to any MH\nclinic.  MH Clinics are identified using the VA-MH NO SHOW APPT CLINICS \nLL Reminder Location List.\n
\n
\n", "", "", "", "", "", "
MH Clinic Fut Visits
\n"], ["255", "MH HIGH RISK PRF HX", "
EN;GMTSMHRF
\n", "", "", "", "", "", "", "", "
MHRF
\n", "
\nThis component displays the assignment status and history for the \nCategory I (National) HIGH RISK FOR SUICIDE Patient Record Flag.\nAny assignment history found for the Category II (Local) High Risk for \nSuicide flag will also be displayed.\n
\n
\n", "", "", "", "", "", "
MH Suicide PRF Hx
\n"], ["256", "MH TREATMENT COORDINATOR", "
EN;GMTSMHTC
\n", "", "", "", "", "", "", "", "
MHTC
\n", "
\nThis component displays Mental Health Treatment Coordinator (MHTC)\nassigned to this patient.\n
\n
\n", "", "", "", "", "", "
MH Treatment Coor
\n"], ["257", "CAT I PT RECORD FLAG STATUS", "
EN;GMTSRFHX
\n", "", "", "", "", "", "", "", "
PRF1
\n", "
\nThis component displays the Active and Inactive Category 1 Patient Record\nFlags assigned to a given patient.  The full assignment history is\nincluded with each instance of flag assignment.  Active flag assignments\nare displayed first, followed by Inactive flag assignments.\n
\n
\n", "", "", "", "", "", ""], ["258", "Med. Reconciliation (Tool #1)", "
TOOL1;GMTSPST1
\n", "", "", "", "", "", "", "", "
MRT1
\n", "
\nThis component generates a list of the patient's complete medication\nprofile, including Outpatient Rx's, Inpatient Medication Orders, Clinic\nOrders, Non-VA Medications, and Remote Active Medications.  It is sorted\nalphabetically by drug name, creating groups of outpatient/inpatient\norders for the same item in order to facilitate medication reconciliation.\n
\n
\n", "", "", "", "", "", "
Med Reconciliation
\n"], ["259", "WH PREGNANCY DOCUMENTATION", "
PDOC;GMTSWVC1
\n", "
\n
\n\n
\n", "", "", "", "", "", "
yes
\n", "
WHP
\n", "
\nThis component displays the pregnancy data stored in the Women's Health\npackage for a particular patient.  The user can specify time and\noccurrence limits.\n
\n
\n", "
yes
\n", "", "", "", "", "
Pregnancy Status
\n"], ["26", "PROGRESS NOTES BRIEF", "
MAIN;GMTSPNB
\n", "", "", "", "", "", "", "
yes
\n", "
BPN
\n", "
\nThis component contains limited information from progress notes entered \nusing the Text Integration Utility (TIU) or the Mental Health packages.\nTime and maximum occurrence limits apply.  Data presented includes:  \nProgress note date/time, title, author and last correction date/time.\n    \nOnly those notes which have been signed with an electronic signature\nor electronically marked signed on chart will be listed.\n
\n
\n", "
yes
\n", "", "", "", "", "
Brief Progress Notes
\n"], ["260", "WH LACTATION DOCUMENTATION", "
LDOC;GMTSWVC1
\n", "
\n
\n\n
\n", "", "", "", "", "", "
yes
\n", "
WHL
\n", "
\nThis component displays the lactation data stored in the Women's Health\npackage for a particular patient.  The user can specify time and\noccurrence limits.\n
\n
\n", "
yes
\n", "", "", "", "", "
Lactation Status
\n"], ["261", "Remote Active Meds (Tool #4)", "
ENHS;GMTSPST4
\n", "", "", "", "", "", "", "", "
MRT4
\n", "
\nThis component will display the details of a patient's remote active\noutpatient medications using data from the Health Data Repository.\n
\n
\n", "", "", "", "", "", ""], ["262", "Allergies/ADRs (Tool #5)", "
ENHS;GMTSPST5
\n", "", "", "", "", "", "", "", "
MRT5
\n", "
\nThis component displays local facility and remote facility allergy and\nadverse data information using the Remote Data Interoperability features\nof the Health Data Repository.  Data from the local facility is merged\ninto a single table with remote facility allergy/adverse reaction data.\n
\n
\n", "", "", "", "", "", "
Allergies/ADRs
\n"], ["266", "WH PREGNANCY & LACTATION DOC", "
ALL;GMTSWVC1
\n", "
\n
\n\n
\n", "", "", "", "", "", "
yes
\n", "
WHPL
\n", "
\nThis component displays the pregnancy and lactation data stored in the\nWomen's Health package for a particular patient.  The user can specify\ntime and occurrence limits.\n
\n
\n", "
yes
\n", "", "", "", "", "
Preg. & Lac. Status
\n"], ["267", "Med Recon NoGlossary (Tool #1)", "
TOOL1;GMTSPSTN
\n", "", "", "", "", "", "", "", "
MRR1
\n", "
\nThis component generates a list of the patient's complete medication\nprofile, including Outpatient Rx's, Inpatient Medication Orders, Clinic\nOrders, Non-VA Medications, and Remote Active Medications.  It is sorted\nalphabetically by drug name, creating groups of outpatient/inpatient\norders for the same item in order to facilitate medication reconciliation.\n
\n
\n", "", "", "", "", "", "
Med Reconciliation
\n"], ["269", "Meds OP/Drug Class", "
MAIN;GMTSPSO8
\n", "", "", "", "", "", "", "
yes
\n", "
RXDC
\n", "
\nThis component contains information from the Outpatient Pharmacy package.\nNote: If no time limit is defined, only active outpatient orders are\nreported. If a time limit is defined, all outpatient pharmacy orders which\nhave an expiration or cancel date within the time limit range are\nreported.\nIt allows selection of prescriptions to display, based on the drug class.\nOnly 'child' classes are displayed, with the exception of the HA000 class.\n\nOnly time limits apply. Data presented include:  drug, prescription number,\nstatus expiration/cancellation date (when appropriate), quantity, issue\ndate, last fill date, refills remaining, provider, and cost/fill (when\navailable).\n\n
\n
\n", "", "", "", "
\n
\n\n
\n", "", "
Meds OP/Drug Class
\n"], ["27", "SURGERY REPORTS BRIEF", "
ENSR;GMTSROB
\n", "", "", "", "", "", "", "
yes
\n", "
BSR
\n", "
\nThis component contains surgery report statuses extracted from the Surgery\npackage.  Time and maximum occurrence limits apply.  Data presented include:\nsurgery date, surgical procedure, and report status (e.g., COMPLETE).\n
\n
\n", "
yes
\n", "", "", "", "
Surgery Package not yet installed
\n", "
Brief Surgery Rpts
\n"], ["270", "Meds OP/Rx Ord Item", "
MAIN;GMTSPSO9
\n", "", "", "", "", "", "", "
yes
\n", "
RXOI
\n", "
\nThis component contains information from the Outpatient Pharmacy package.\nNote: If no time limit is defined, only active outpatient orders are\nreported. If a time limit is defined, all outpatient pharmacy orders which\nhave an expiration or cancel date within the time limit range are\nreported.\nIt allows selection of prescriptions to display, based on the Pharmacy\norderable item associated with the order.\n\nOnly time limits apply.  Data presented include:  drug, prescription number,\nstatus expiration/cancellation date (when appropriate), quantity, issue\ndate, last fill date, refills remaining, provider, and cost/fill (when\navailable).\n\n
\n
\n", "", "", "", "
\n
\n\n
\n", "", "
Meds OP/Rx Ord Item
\n"], ["271", "PDMP AOD ALL", "
PDMPAODA;GMTSORPD
\n", "", "", "", "", "", "", "
yes
\n", "
PMPA
\n", "
\nThis component lists the PDMP Accounting of Disclosures for instances\nwhere a PDMP query was initiated from within CPRS and patient's data was\nshared outside of the VA. It will also include cases where a PDMP\nnote was manually created to document a PDMP query made directly on a\nstate's PDMP portal.\n
\n
\n", "", "", "", "", "", "
PDMP AoD All
\n"], ["272", "MAS DEM SEXUAL ORIENTATION", "
SEXOR;GMTSDEMC
\n", "", "", "", "", "", "", "", "
DEMS
\n", "
\nThis component contains information from the PATIENT (#2) file. \nSpecifically, it includes the data from the SEXUAL ORIENTATION (.025)\nmultiple field, as well as the SEXUAL ORIENTATION DESRIPTIONN (.0251)\nfield, when appropriate.\n
\n
\n", "", "", "", "", "", "
Sexual Orientation
\n"], ["273", "MAS DEMOGRAPHICS PRONOUNS", "
PRONOUN;GMTSDEMC
\n", "", "", "", "", "
VA
\n", "", "", "
DEMP
\n", "
\nThis component displays a patient's pronouns.\n
\n
\n", "", "", "", "", "", "
Pronoun(s)
\n"], ["274", "MAS DEMOGRAPHICS GENDER ID", "
SIGI;GMTSDEMC
\n", "", "", "", "", "
VA
\n", "", "", "
DEMG
\n", "
\nThis component displays a patient's self-identified gender identity.\n
\n
\n", "", "", "", "", "", "
Gender Identity
\n"], ["28", "PHARMACY OUTPATIENT", "
MAIN;GMTSPSO
\n", "", "", "", "", "", "", "
yes
\n", "
RXOP
\n", "
\nThis component contains information from the Outpatient Pharmacy package.\nreported.\nOnly time limits apply.  Data presented include:  drug, prescription number,\nstatus expiration/cancellation date (when appropriate), quantity, issue\ndate, last fill date, refills remaining, provider, and cost/fill (when\navailable).\n \nNote: If no time limit is defined, only active outpatient orders are\nreported. If a time limit is defined, all outpatient pharmacy orders which\nhave an expiration or cancel date within the time limit range are\n
\n
\n", "", "", "", "", "
Outpatient Pharmacy not yet available
\n", "
Outpatient Pharmacy
\n"], ["29", "PHARMACY UNIT DOSE", "
MAIN;GMTSPSG
\n", "", "", "", "", "", "", "
yes
\n", "
RXUD
\n", "
\nThis component contains Unit Dose information extracted from the Pharmacy\npackage.  Only time limits apply.  Data presented include:  Drug, dose,\npharmacy status, start date, stop date, and sig (which includes schedule\ninstructions and route).\n  \nNOTE: If no time limit is defined, all active orders are reported.  \nIf a time limit is defined, all unit dose orders which have an expiration or\ncancel date within the time limit range are reported.\n
\n
\n", "", "", "", "", "
Inpatient Medications not yet available
\n", "
Unit Dose Pharmacy
\n"], ["3", "LAB CHEMISTRY & HEMATOLOGY", "
MAIN;GMTSLRC
\n", "", "", "", "", "", "", "
yes
\n", "
CH
\n", "
\nThis component contains information extracted from the Lab package.\nTime and maximum occurrence limits apply to this component. Data\npresented include:  collection date/time, specimen, test name, results\n(w/ref flag:  High/Low/Critical), units, and Reference range.\nComments will also be conditionally displayed, depending on the value\nof the DISPLAY COMMENTS ON LABS Health Summary Site Parameter.  Results\nwhich include comments will be indicated with the symbol !!, in the\nevent that the parameter is set to 0 or NO.\n
\n
\n", "
yes
\n", "", "", "", "", "
Chem & Hematology
\n"], ["30", "PHARMACY INTRAVENOUS", "
MAIN;GMTSPSI
\n", "", "", "", "", "", "", "
yes
\n", "
RXIV
\n", "
\nThis component contains IV orders extracted from the Pharmacy package.\nOnly time limits apply.  Data presented include:  start date, stop date,\ndrug (additives), dose, status, solutions and infusion rates.\n \nNote: If no time limit is defined, only active IV orders are reported.\nIf a time limit is defined, all IV orders which have an expiration or\ncancel date within the time limit range are reported.\n
\n
\n", "", "", "", "", "
Inpatient Medications not yet available
\n", "
IV Pharmacy
\n"], ["31", "LAB ORDERS BRIEF", "
MAIN;GMTSLROB
\n", "", "", "", "", "", "", "
yes
\n", "
BLO
\n", "
\nThis component contains information extracted from the Lab package.\nTime and maximum occurrence limits apply.Data presented include:\ncollection date/time, lab test name, specimen, urgency, and order\nstatus (e.g., ORDERED, COLLECTED, PROCESSING, COMPLETE).\n
\n
\n", "
yes
\n", "", "", "", "", "
Brief Lab Orders
\n"], ["32", "LAB ORDERS", "
MAIN;GMTSLROS
\n", "", "", "", "", "", "", "
yes
\n", "
LO
\n", "
\nThis component contains information extracted from the Lab package.\nTime and maximum occurrence limits apply. Data presented include:\ncollection date (either actual or expected), lab test, provider,\naccession, date/time ordered, specimen, and date/time results available.\n
\n
\n", "
yes
\n", "", "", "", "", "
Lab Orders
\n"], ["33", "LAB TESTS SELECTED", "
MAIN;GMTSLRS
\n", "
\n
\n\n
\n", "", "", "", "
LR
\n", "", "
yes
\n", "
SLT
\n", "
\nThis component contains information extracted from the Lab package. Not\nNote: This component corresponds to the vertical format for the Lab\npackage's cumulative reports.\nonly do time and maximum occurrence limits apply to this component, but\nthe user is allowed to select any number of atomic Lab tests. Data\nincludes: collection date/time, specimen, test name, result, units and\nreference range. Comments will also be conditionally displayed, depending\non the value of the DISPLAY COMMENTS ON LABS Health Summary Site\nParameter. Results which include comments will be indicated with the\nsymbol !!, in the event that the parameter is set to 0 or NO. \n \n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Lab Tests Selected
\n"], ["34", "IMAGING STATUS", "
ENRAD;GMTSRAD
\n", "", "", "", "", "", "", "
yes
\n", "
IS
\n", "
\nThis component contains procedure statuses from the Radiology/Nuclear\nMedicine package. Time and maximum occurrence limits apply. Data presented\ninclude: request date/time, status, procedure, scheduled date/time, and\nprovider name.\n
\n
\n", "
yes
\n", "", "", "", "
Requires Radiology version 3 or later
\n", "
Imaging Status
\n"], ["35", "IMAGING PROFILE", "
ENSRA;GMTSRAS
\n", "", "", "", "", "", "
YES
\n", "
yes
\n", "
IP
\n", "
\nThis component contains information from the Radiology/Nuclear Medicine\npackage.  Time and maximum occurrence limits apply.  Data presented\ninclude:  study date, procedure(s) with status(es), report status, staff\nand resident interpreting physicians, and the narrative fields modifier,\nhistory, report, diagnostic text and impression.\n \nOnly imaging profiles which have been verified are reported.\n
\n
\n", "
yes
\n", "", "", "", "
Requires Radiology version 3 or later
\n", "
Imaging Profile
\n"], ["36", "LAB BLOOD TRANSFUSIONS", "
MAIN;GMTSLRT
\n", "", "", "", "", "", "", "
yes
\n", "
BT
\n", "
\nThis component contains information from the Blood Bank module of the\nLab Package.  Time and occurrence limits apply to this component.  Data\npresented include:  transfusion date and abbreviated blood products\n(with total number of units transfused for each, e.g., RBC (2)).\nA key of the abbreviations is presented at the bottom of the display\nto help identify any unfamiliar blood products.\n
\n
\n", "
yes
\n", "", "", "", "", "
Blood Transfusions
\n"], ["37", "LAB MICROBIOLOGY BRIEF", "
MAIN;GMTSLRMB
\n", "", "", "", "", "", "", "
yes
\n", "
BMIC
\n", "
\nThis component contains information extracted from the Lab package. Time\nand maximum occurrence limits apply to this component in addition to\ncollection date/time, test names, specimen, report status, Culture and\nSusceptibility, Smear/Prep, Acid Fast Stain, Antibiotic Serum Level, and\ntest results.\n
\n
\n", "
yes
\n", "", "", "", "", "
Brief Microbiology
\n"], ["38", "LAB MICROBIOLOGY", "
MAIN;GMTSLRM
\n", "", "", "", "", "", "", "
yes
\n", "
MIC
\n", "
\nThis component contains information extracted from the Microbiology module\nof the Lab Package.  Time and maximum occurrence limits apply. Data\ninclude:  collection date/time, collection sample, site/specimen,\nspecimen comment, tests, urine screen, sputum screen, sterility control,\nsterility results, comments for reports, smear/prep, acid fast stain\nParasite Report, organism(s), Mycology Report, Bacteriology Report,\nMycobacteriology Report, Gram Stain Result, Culture and Susceptibility,\nAntibiotic Serum Level, and remarks.\n
\n
\n", "
yes
\n", "", "", "", "", "
Microbiology
\n"], ["4", "CLINICAL WARNINGS", "
CW;GMTSCW
\n", "", "", "", "", "", "", "", "
CW
\n", "
\nThis component contains clinical warning notes entered using the Text \nIntegration Utility (TIU).  Clinical Warnings are a type of progress note\nwhich includes clinical information which clinicians need to be alerted to.\nNo time or maximum occurrence limits apply to this component.\n\nIf this component is printed out on a CRT, information will include title,\ntext of note, electronic signature block, and date posted.  If the printout\nis to another device type, information will include electronic signature\nblock and date posted to ensure security of information.\n
\n
\n", "", "", "", "", "", "
Clinical Warnings
\n"], ["43", "LAB CUMULATIVE SELECTED", "
MAIN;GMTSLRSC
\n", "", "", "", "", "", "", "
yes
\n", "
SCLU
\n", "
\nThis component contains information extracted from the Lab package. Not\nresults are displayed with comments being linked by the lower case letter.\nUp to 26 comments can be included.\nonly do time and maximum occurrence limits apply to this component, but\nthe user is allowed to select any number of atomic Lab tests. Data\npresented include:  collection date/time, specimen, test names with\nresults and reference flags in columnar (horizontal) format. Comments will\nalso be conditionally displayed, depending on the value of the DISPLAY\nCOMMENTS ON LABS Health Summary Site Parameter. When comments are\ndisplayed, a lower case letter will be displayed to the left of the date\nfor entries with comments. Comments will be displayed after all the\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Lab Cum Selected
\n"], ["45", "LAB BLOOD AVAILABILITY", "
MAIN;GMTSLRB
\n", "", "", "", "", "", "", "
yes
\n", "
BA
\n", "
\nThis component contains information from the Blood Bank module of the Lab\nPackage. Time and occurrence limits apply to this component. Data\npresented include: patient blood type (whether or not units have been\nassigned), unit expiration date, unit ID#, blood product(s), cross-match\nresults, last known location, and a flag for autologous units. \n \nNote:  An asterisked date (e.g., * 10/10/90) indicates that the unit is\ndue to expire within the next 48 hours.\n
\n
\n", "
yes
\n", "", "", "", "", "
Blood Availability
\n"], ["46", "LAB SURGICAL PATHOLOGY", "
MAIN;GMTSLRA
\n", "", "", "", "", "", "", "
yes
\n", "
SP
\n", "
\nThis component contains information extracted from the Surgical Pathology\nmodule of the Lab package. Time and maximum occurrence limits apply. Data\npresented include:  collection date/time, accession number, specimen,\ngross description, microscopic description, brief clinical history,\nsupplementary report description, frozen section and surgical path\ndiagnosis.\n
\n
\n", "
yes
\n", "", "", "", "", "
Surgical Pathology
\n"], ["47", "VITAL SIGNS", "
ENVS;GMTSVS
\n", "
\n
\n\n
\n", "", "", "", "", "", "
yes
\n", "
VS
\n", "
\nThis component contains vital measurements extracted from the Vital Signs\nmodule of the Nursing package.  Time and maximum occurrence limits apply.\nData presented include:  measurement date/time, blood pressure (as SBP/DBP),\npulse, temperature, height, weight, and respiratory rate.\n
\n
\n", "
yes
\n", "", "", "", "
Vital Signs not yet available
\n", "
Vital Signs
\n"], ["48", "LAB CYTOPATHOLOGY", "
MAIN;GMTSLRCP
\n", "", "", "", "", "", "", "
yes
\n", "
CY
\n", "
\nThis component contains information extracted from the Cytopathology\nmodule of the Lab package. Time and maximum occurrence limits apply.\nData presented include:  collection date/time, accession number,\nspecimen, gross description, microscopic exam, brief clinical history,\nand Cytopathology Diagnosis.\n
\n
\n", "
yes
\n", "", "", "", "", "
Cytopathology
\n"], ["49", "VITAL SIGNS SELECTED", "
ENVS;GMTSVSS
\n", "
\n
\n\n
\n", "", "", "", "
GMRV
\n", "", "
yes
\n", "
SVS
\n", "
\nThis component contains selected vital measurements extracted from the Vital\nSigns module of the Nursing package.  Time and maximum occurrence limits\napply, and the user is allowed to select any of the vital measurement types\ndefined in the Vital Type file (e.g., pulse, blood pressure, temperature,\nheight, weight, and respiration rate).  Data presented include:\nmeasurement date/time, measurement type and measurement value.\nNote: Formatted display is horizontal.\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Vital Signs Selected
\n"], ["5", "CRISIS NOTES", "
CN;GMTSCW
\n", "", "", "", "", "", "", "", "
CN
\n", "
\nThis component contains crisis notes entered using the Text Integration \nUtility (TIU).  Crisis Notes are a type of progress note which contains \nimportant information for anyone who deals with a patient.  No time or \nmaximum occurrence limits apply to this component.\n\nIf this component is printed out on a CRT, information will include title,\ntext of note, electronic signature block, and date posted. If the printout\nis to another device type, information will include electronic signature\nblock and date posted to insure security of information.\n
\n
\n", "", "", "", "", "", "
Crisis Notes
\n"], ["50", "MAS PROCEDURES ICD CODES", "
ENP;GMTSDGP
\n", "", "", "", "", "", "", "
yes
\n", "
PRC
\n", "
\nThis component contains MAS coded procedures, by admission, extracted from\nthe MAS package.  Time and occurrence limits apply to this component.  Data\npresented include:  procedure date, procedure name, and ICD-9CM procedure\ncodes.\n  \nNote: The occurrence limits are determined by the occurrence of admissions.\n
\n
\n", "
yes
\n", "", "", "", "", "
ICD Procedures
\n"], ["51", "MEDICINE SUMMARY", "
CPS;MDPS1
\n", "", "", "", "", "
MD
\n", "", "
yes
\n", "
MEDS
\n", "
\nThis component displays a (1 line) summary\nwith the Consult Number, Procedure Name, Date/Time Performed\nand Procedure Summary Code.\n
\n
\n", "
yes
\n", "", "", "", "", "
Med (1 line) Summary
\n"], ["52", "IMAGING IMPRESSION", "
ENSRA;GMTSRAI
\n", "", "", "", "", "", "", "
yes
\n", "
II
\n", "
\nThis component contains impressions from the Radiology/Nuclear Medicine\npackage.  Time and maximum occurrence limits apply.  Data presented\ninclude:  study date, procedure(s), status, diagnostic text and\nradiologist's or nuclear med physician's impression (narrative).\n \nOnly imaging impressions which have been verified are reported.\n
\n
\n", "
yes
\n", "", "", "", "
Requires Radiology version 3 or later
\n", "
Imaging Impression
\n"], ["54", "ORDERS CURRENT", "
MAIN;GMTSORC
\n", "", "", "", "", "", "", "
yes
\n", "
ORC
\n", "
\nThis component contains current orders from the OE/RR package.  Since the  \n"blank"=Active, "c"=Complete, "dc"=Discontinued, "e"= expired, "?"=Flagged,\n"h"=Hold, "i"=incomplete, "p"=pending, "s"=scheduled.\nOE/RR package integrates all orders for the ancillary services, the orders\nwill be reported in most recent orders first sequence without concern \nfor the ancillary package the order originated from/for. Current orders\nare defined as those orders with an OE/RR order status other than\ndiscontinued or expired.\n  \nThe component information includes item ordered, OE/RR order status, \nstart date, and stop date. OE/RR order status abbreviations include\n
\n
\n", "", "", "", "", "", "
Current Orders
\n"], ["55", "MAS ADT HISTORY", "
MAIN;GMTSDGH
\n", "", "", "", "", "", "", "
yes
\n", "
ADT
\n", "
\nThis component contains information extracted from the MAS package.\nIt can only be used with MAS Version 5 and up.\n  \nTime and maximum occurrence limits apply.  Data presented include:\nmovement date, movement type (ADM=Admission, TR=Transfer, TS= Treating\nSpecialty, DC=Discharge), movement description, specialty, and provider.\n
\n
\n", "
yes
\n", "", "", "", "", "
ADT History
\n"], ["56", "IMAGING IMPRESSION SELECTED", "
MAIN;GMTSRASP
\n", "", "", "", "", "", "", "
yes
\n", "
SII
\n", "
\nThis component contains impressions from the Radiology/Nuclear Medicine\npackage.  Time and occurrence limits apply.  Data presented include: study\ndate, procedure(s), status, diagnostic text, and radiologist's or nuclear\nmed physician's impression (narrative) for the procedures selected by the\nuser (e.g., CHEST 2 VIEWS - PA & LAT).\n \nOnly imaging impressions which have been verified are reported.\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "
Requires Radiology version 3 or later
\n", "
Sel Image Impression
\n"], ["57", "DISCHARGE SUMMARY", "
MAIN;GMTSDS
\n", "", "", "", "", "", "", "
yes
\n", "
DCS
\n", "
\nThis component prints all discharge summaries (including report text) for\nuser-specified time and occurrence limits.\n
\n
\n", "
yes
\n", "", "", "", "
Discharge Summary Package not yet installed or available
\n", "
Discharge Summary
\n"], ["58", "DISCHARGE SUMMARY BRIEF", "
MAIN;GMTSDSB
\n", "", "", "", "", "", "", "
yes
\n", "
BDS
\n", "
\nThis component prints the admission, discharge and cosignature dates, as\nthe dictating and approving provider names, and signature status of\nall discharge summaries for user-specified time and occurrence limits.\n
\n
\n", "
yes
\n", "", "", "", "
Discharge Summary Package not yet installed or available
\n", "
Brief Disch Summary
\n"], ["59", "PROBLEM LIST ACTIVE", "
ACTIVE;GMTSPLST
\n", "
\n
\n\n
\n", "", "
yes
\n", "
yes
\n", "
GMPL
\n", "", "", "
PLA
\n", "
\nThis component lists all known active problems for a patient. Information\ndisplayed: ICD data (based on ICD Text Display parameter), provider\nnarrative (unless Provider Narrative Display parameter is set to NO), date\nof onset, date last modified, the responsible provider, and all active\ncomments.\n
\n
\n", "", "", "", "", "", "
Active Problems
\n"], ["6", "MAS DEMOGRAPHICS", "
DEMOG;GMTSDEM
\n", "", "", "", "", "", "", "", "
DEM
\n", "
\nThis component contains the following patient demographic data \n(if available) from the MAS package: address, phone, county, \nmarital status, religion, age, sex, race, ethnicity, occupation,\nperiod of service, POW status (e.g., Y or N), branch of service,\ncombat status (e.g., Y or N), eligibility code, current (verified)\neligibility status, service connected %, mean test, primary and\nsecondary next of kin (NOK), NOK phone number and address.\n
\n
\n", "", "", "", "", "", "
Demographics
\n"], ["60", "PROBLEM LIST INACTIVE", "
INACT;GMTSPLST
\n", "", "", "
yes
\n", "
yes
\n", "", "", "", "
PLI
\n", "
\nThis component lists all known inactive problems for a patient.\nInformation displayed: ICD data (based on ICD Text Display parameter),\nprovider narrative (unless Provider Narrative Display parameter is set to\nNO), date problem resolved, date last modified, the responsible provider,\nand all active comments for the problem.\n
\n
\n", "", "", "", "", "
Problem List 2.0 Package not yet installed or available
\n", "
Inactive Problems
\n"], ["61", "PROBLEM LIST ALL", "
ALL;GMTSPLST
\n", "", "", "
yes
\n", "
yes
\n", "", "", "", "
PLL
\n", "
\nThis component lists all known problems, both active and inactive,\nfor a patient.\nparameter), provider narrative (unless Provider Narrative Display\nparameter is set to NO), date of onset (if problem is active), date\nproblem resolved (if inactive), date last modified, the responsible\nprovider, and all active comments for the problems.\n
\n
\n", "", "", "", "", "
Problem List 2.0 Package not yet installed or available
\n", "
All Problems
\n"], ["62", "SOCIAL WORK", "
MAIN;GMTSSOWK
\n", "", "", "", "", "", "", "", "
SW
\n", "
\nThis component provides information from the Social Work package about a\npatient's Social/Family Relationship, Current Substance Abuse Problems,\nand Psycho-Social Assessment.\n
\n
\n", "", "
permanent
\n", "", "", "
Social Work Service version 3.0 not yet installed
\n", "
Social Work
\n"], ["64", "MAS ADT HISTORY EXPANDED", "
MAIN;GMTSDGCH
\n", "", "", "", "", "", "", "
yes
\n", "
EADT
\n", "
\nThis component contains information extracted from the MAS package. It is\ndischarged. Transfers included ward location and transfer facility.\nTreating specialties includes Specialty Tranfers Diagnosis. Dicharges\ninclude the data in the Discharge Diagnosis and Discharges components.\nFollowing the data for each admission ICD Procedures, and ICD Surgeries\nwill be include if present.\na consolidated view of all the MAS components. It can only be used with\nMAS Version 5 and up.\n \nTime and maximum occurrence limits apply. Data presented include patient\neligibility and rated disabilities. Movement data then follows with\nmovement date, movement type (ADM=Admission, TR=Transfer, TS= Treating\nSpecialty, DC=Discharge), movement description, specialty, and provider.\nAdmissions include the admission diagnosis if the patient hasn't been\n
\n
\n", "
yes
\n", "", "", "", "", "
ADT History Expanded
\n"], ["65", "COMPENSATION AND PENSION EXAMS", "
MAIN;GMTSAMIE
\n", "", "", "", "", "", "", "
yes
\n", "
CP
\n", "
\nThis component prints all compensation and pension exams for a given\npatient by user-specified time and occurrence limits.\n
\n
\n", "
yes
\n", "", "", "", "
Requires AMIE version 2.7
\n", "
Comp. & Pen. Exams
\n"], ["66", "MEDICINE ABNORMAL BRIEF", "
CPA;MDPS1
\n", "", "", "", "", "
MD
\n", "", "
yes
\n", "
MEDA
\n", "
\nThis component displays the Display Result\nof the Consults procedure and the TIU documents for\nthe abnormal procedures.\n
\n
\n", "
yes
\n", "", "", "", "
Medicine 2.2 Package not yet installed or available
\n", "
Med Abnormal
\n"], ["67", "MEDICINE BRIEF REPORT", "
CPB;MDPS1
\n", "", "", "", "", "
MD
\n", "", "
yes
\n", "
MEDB
\n", "
\nThis component displays the Clinical Procedure Name,\nthe Date/Time Performed, and the Procedure Summary Code.\n
\n
\n", "
yes
\n", "", "", "", "
Medicine 2.2 Package not yet installed or available
\n", "
Med Brief Report
\n"], ["68", "MEDICINE FULL CAPTIONED", "
CPC;MDPS1
\n", "", "", "", "", "
MD
\n", "", "
yes
\n", "
MEDC
\n", "
\nThis component displays the Display Result\nof the Consults procedure and the TIU documents for\nthe procedure.\n
\n
\n", "
yes
\n", "", "", "", "
Medicine 2.2 Package not yet installed or available
\n", "
Med Full Captioned
\n"], ["69", "MEDICINE FULL REPORT", "
CPF;MDPS1
\n", "", "", "", "", "
MD
\n", "", "
yes
\n", "
MEDF
\n", "
\nThis component displays the Display Result\nof the Consults procedure and the TIU documents for\nthe procedure.\n
\n
\n", "
yes
\n", "", "", "", "
Medicine 2.2 Package not yet installed or available
\n", "
Med Full Report
\n"], ["7", "DIETETICS", "
MAIN;GMTSFH
\n", "", "", "", "", "", "", "
yes
\n", "
DI
\n", "
\nThis component contains information from the Dietetics package.  Time\nand occurrence limits apply to this component.  Data presented include:\ndiet orders, start/stop dates, type of service (tray, e.g.); nutritional\nstatus, date assessed; supplemental feedings, start/stop dates; tube\nfeedings, start/stop dates, strength of product, quantity ordered, and daily\ndosages.\n  \nNote:  When a time limit is selected, the data presented reflects orders\ninitiated within the time period.\n
\n
\n", "
yes
\n", "", "", "", "", "
Dietetics
\n"], ["71", "MENTAL HEALTH PHYSICAL EXAM", "
MAIN;GMTSMHPE
\n", "", "", "", "", "", "", "
yes
\n", "
MHPE
\n", "
\nThe Mental Health Physical Exam component contains the results of the\nphysical examination concerning patient's overall condition associated\nwith the systems identified. This data is being extracted from the Medical\nRecord (# 90) file.\n
\n
\n", "
yes
\n", "
permanent
\n", "", "", "
DEACTIVATED BY HEALTH SUMMARY PATCH GMTS*2.7*102
\n", "
MH Physical Exam
\n"], ["72", "LAB ELECTRON MICROSCOPY", "
MAIN;GMTSLREM
\n", "", "", "", "", "", "", "
yes
\n", "
EM
\n", "
\nThis component contains information extracted from the Electron Microscopy\nmodule of the Lab package. Time and maximum occurrence limits apply. Data\npresented include:  collection date/time, accession number, specimen,\ngross description, microscopic exam, supplementary report description,\nbrief clinical history, and EM Diagnosis.\n
\n
\n", "
yes
\n", "", "", "", "", "
Electron Microscopy
\n"], ["73", "ADVERSE REACTIONS/ALLERG BRIEF", "
ALLRG;GMTSALGB
\n", "", "", "", "", "", "", "", "
BADR
\n", "
\nThis component provides patient allergy/adverse reaction information from\nthe Allergy Tracking System. It provides a brief patient list of all known\nfood, drug and environmental allergies or adverse reactions (e.g., hay\nfever).\n
\n
\n", "", "", "", "", "", "
Brief Adv React/All
\n"], ["75", "VITAL SIGNS OUTPATIENT", "
OUTPAT;GMTSVS
\n", "
\n
\n\n
\n", "", "", "", "", "", "
yes
\n", "
VSO
\n", "
\nThis component contains outpatient vital measurements extracted\nfrom the Vital/Measurements (Gen. Med. Rec. - Vitals) package.  Time and maximum\noccurrence limits apply.  Data presented includes: measurement\ndate/time, blood pressure, (as SBP/DBP), pulse, temperature,\nheight, weight, and respiratory rate.\nMetric values will be displayed for temperature, height and weight.\nIf there are no outpatient measurements, a message will be displayed and\nthe last non-outpatient measurements will be shown.\n
\n
\n", "
yes
\n", "", "", "", "", "
Vital Signs Outpat.
\n"], ["76", "VITAL SIGNS SELECTED OUTPAT.", "
OUTPAT;GMTSVSS
\n", "
\n
\n\n
\n", "", "", "", "", "", "
yes
\n", "
SVSO
\n", "
\nThis component contains selected outpatient vital measurements\nthe last selected non-outpatient measurements will be shown.\nNote: Formatted display is horizontal.\nextracted from the Vital/Measurements (Gen. Med. Rec. - Vitals) package.\nTime and maximum occurrence limits apply and the user is allowed\nto select any of the vital measurement types defined in the\nGMRV Vital Type file (e.g., pulse, blood pressure, temperature, height,\nweight, and respiration rate).  Data presented includes: measurement\ndate/time, measurement type and measurement value,\nand metric values for temperature, height and weight.\nIf there is no outpatient measurements, a message will be shown and\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Vital Select Outpat.
\n"], ["77", "SURGERY ONLY REPORTS", "
ENSRO;GMTSRO
\n", "", "", "", "", "", "
YES
\n", "
yes
\n", "
SRO
\n", "
\nThis component will return surgery procedures only and will NOT\ninclude NON-OR procedures.  Time and maximum occurrence limits\napply.\nFor Surgical procedures the data presented will be: surgery date,\nsurgeon, surgery report status, pre-operative diagnosis, post-operative\ndiagnosis, surgeon's dictation, current procedural terminology operation\ncode and text, and principal anesthesiologist.\n
\n
\n", "
yes
\n", "", "", "", "", "
Surgery Only Reports
\n"], ["78", "SURGERY NON OR PROCEDURES", "
ENSR;GMTSRON
\n", "", "", "", "", "", "
YES
\n", "
yes
\n", "
NSR
\n", "
\nThis component will print out data for NON-OR procedures only.\nTime and maximum occurrence limits apply.\nThe data presented will be: provider specialty,\nprovider, procedure status, attending, principal diagnosis, procedures\nperformed, principal anesthesiologist, indication for procedure,\nand operative findings.\n
\n
\n", "
yes
\n", "", "", "", "", "
NON OR Procedures
\n"], ["79", "SURGERY SEL NON OR PROCEDURES", "
ENSR;GMTSRON
\n", "", "", "", "", "", "
YES
\n", "
yes
\n", "
SNSR
\n", "
\nThis component will return selected NON-OR procedures.  The user\nwill be allowed to select one or more CPT codes to search for.  The\nNON-OR procedures will be displayed if the selected CPT code(s)\nmatch the principal procedure code.\nTime and maximum occurrence limits apply.\nThe data presented will be: provider specialty,\nprovider, procedure status, attending, principal diagnosis, procedures\nperformed, principal anesthesiologist, indication for procedure,\nand operative findings.\n
\n
\n", "
yes
\n", "", "", "
\n
\n\n
\n", "", "
Selected NON-OR Proc
\n"], ["8", "MAS DISCHARGES", "
ENDC;GMTSDGA
\n", "", "", "", "", "", "", "
yes
\n", "
DC
\n", "
\nThis component contains information extracted from the MAS package. \nTime and occurrence limits apply to this component.  Data presented\ninclude:  date of discharge, DXLS, bedsection, disposition type,\ndisposition place, and outpatient treatment flag.\n \nNote: The occurrence limits are determined by the occurrence of admissions.\n
\n
\n", "
yes
\n", "", "", "", "", "
Discharges
\n"], ["9", "MAS CLINIC VISITS FUTURE", "
FUTURE;GMTSDA
\n", "", "", "", "", "", "", "", "
CVF
\n", "
\nThis component provides a listing from the MAS scheduling module that\ncontains future clinic visit dates, the clinic visited, and the \nappointment type.\n
\n
\n", "", "", "", "", "", "
Fut Clinic Visits
\n"]]}