| DESCRIPTION OF ENHANCEMENTS |
EFFECT ON BLOOD BANK FUNCTIONAL REQUIREMENTS: Patch LR*5.2*302 does not
be formally requested by notifying the National Laboratory Test
Coordinator using the form provided on the VistA laboratory Documentation
Web Page.
http://vista.domain.ext/clinicalspecialties/lab/
Forward your completed request form to the Exchange distribution group:
VHAISD LAB NLT_LOINC
===========================
****************************IMPORTANT**********************************
This patch will completely remove certain files, replace the files with a
standardized copy and then re-point the saved field entries to the
standardized copy. It is high desirable to determine that current fields
and files are free of incorrect data. This will ensure that the patch
installation will not introduce any new errors.
Failure to ensure FileMan verification of fields option can be run
without generating warnings will result in unresolved errors, which could
have unpredictable results. The patch installation will not be affected
by an invalid field. The patch will generate error message indicating
those files/fields that could not be successfully re-pointed after the
There is considerable PRE-installation file verification and preparation
standardized have been installed.
*** Examples of a single file verify:
Select OPTION NAME: VA FileMan
VA FileMan Version 22.0
Select VA FileMan Option: Utility Functions
Select Utility Functions Option: VERify Fields
to be performed by staff familiar with the use of FileMan and Laboratory
MODIFY WHAT FILE: WKLD CODE// 60 LABORATORY TEST (1059 entries)
VERIFY WHICH FIELD: ALL
DO YOU MEAN ALL THE FIELDS IN THE FILE? YES
DEVICE: HOME//
While the entire file should pass the verify fields check, the fields
listed below are the critical entries that should not produce any
warnings. If there are any warnings for these fields, they should be
file structure. Failure to perform this pre-install testing before
rectified before the patch is installed or the post install re-pointing
procedure will not perform properly.
This is a list of files and fields that will be re-pointed after the LAB
ELECTRONIC CODES (#64.061) is installed. These fields should be free of
verify field warnings. Errors or warnings in other fields WILL NOT affect
the post-install re-pointing process but should be addressed as soon a
possible.
To ensure that there are not any existing pointer problems, files and
attempting to install this patch significantly increases the risk of
fields need to be validated. Data and file validation is done with the FM
Verify Fields option. Only those fields pointing to the replaced files
and the WKLD CODE file are an issue.
File # File Name Field # Field Name
====== ========= ======= ==========
60 LABORATORY TEST
60.01 SITE/SPECIMEN SUB-FIELD 95.3 LOINC CODE
encountering errors, during or post installation. The key element to
61 TOPOGRAPHY FIELD
61 TOPOGRAPHY FIELD .09 LEDI HL7
61 TOPOGRAPHY FIELD .0961 TIME ASPECT
62.05 URGENCY
62.05 URGENCY 4 LEDI HL7
62.4 AUTO INSTRUMENT
62.4 AUTO INSTRUMENT .14 WKLD METHOD
ensuring a successful installation of the patch depends upon existing
62.8 LAB SHIPPING MANIFEST
62.801 SPECIMENS SUB-FIELD 1.14 PATIENT HEIGHT CODE
62.801 SPECIMENS SUB-FIELD 1.24 PATIENT WEIGHT CODE
62.801 SPECIMENS SUB-FIELD 2.14 COLLECTION VOLUME CODE
62.801 SPECIMENS SUB-FIELD 2.24 COLLECTION DURATION CODE
62.801 SPECIMENS SUB-FIELD 2.34 COLLECTION WEIGHT CODE
62.801 SPECIMENS SUB-FIELD 1.13 PATIENT HEIGHT UNITS
62.801 SPECIMENS SUB-FIELD 1.23 PATIENT WEIGHT UNITS
62.801 SPECIMENS SUB-FIELD 2.13 COLLECTION VOLUME UNITS
62.801 SPECIMENS SUB-FIELD 2.23 COLLECTION DURATION UNITS
files not containing corrupt data. If corrupt data is present in the
62.801 SPECIMENS SUB-FIELD 2.33 COLLECTION WEIGHT UNITS
62.85 LAB SHIPPING EVENT .05 EVENT CODE
62.9 LAB SHIPPING CONFIGURATION
62.9001 TEST/PROFILE 1.15 PATIENT HEIGHT UNITS
62.9001 TEST/PROFILE 1.25 PATIENT WEIGHT UNITS
62.9001 TEST/PROFILE 2.15 COLLECTION VOLUME UNITS
62.9001 TEST/PROFILE 2.25 COLLECTION DURATION UNITS
62.9001 TEST/PROFILE 2.35 COLLECTION WEIGHT UNITS
62.9001 TEST/PROFILE 1.16 PATIENT HEIGHT CODE
affected files, when the fields are re-pointed during the post
62.9001 TEST/PROFILE 1.26 PATIENT WEIGHT CODE
62.9001 TEST/PROFILE 2.16 COLLECTION VOLUME CODE
62.9001 TEST/PROFILE 2.26 COLLECTION DURATION CODE
62.9001 TEST/PROFILE 2.36 COLLECTION WEIGHT CODE
64.2 WKLD SUFFIX CODE
64.2 WKLD SUFFIX CODE 1 WKLD SUFFIX CODE
64.2 WKLD SUFFIX CODE 4 BILLABLE PROCEDURE
64.2 WKLD SUFFIX CODE 7 COST
64.2 WKLD SUFFIX CODE 8 PRICE
contain any changes to the VISTA BLOOD BANK Software as defined by VHA
installation update phase, errors will occur. Please read and follow all
64.2 WKLD SUFFIX CODE 9 SORTING GROUP
64.2 WKLD SUFFIX CODE 15 ACTIVATE WKLD CODE
64 WKLD CODE
64.02 TIME ASPECT SUB-FIELD .01 TIME ASPECT
64.02 TIME ASPECT SUB-FIELD 1 UNITS
68.2 LOAD/WORK LIST
68.2 LOAD/WORK LIST .14 WKLD METHOD
of the instructions outlined in this patch description.
69.6 LAB PENDING ORDERS ENTRY
69.6 LAB PENDING ORDERS ENTRY 6 SPECIMEN STATUS
69.64 ORDERED TESTS SUB-FIELD 5 TEST STATUS
Resolving FM Verify Fields warnings instructions
The most common verify field errors are:
1. Fields not properly cross referenced. This can be resolved by
re-indexing the file.
2. Fields failing input transform. This can be resolved by either editing
***********************************************************************
the field and entering appropriate data; or deleting the existing data in
the field.
Note: When performing FM Verify fields, an error will be produced in the
TOPOGRAPHY FIELD((#61) file, SNOMED CODE (#2)field by the input transform
logic error.
Example:
ENTRY# NAME ERROR
1 RIGHT LUNG "28100" fails Input Transform
ALREADY AN ENTRY
This input transform logic error will be corrected with the installation
of this patch.
** NO PRE-INSTALL CORRECTIVE ACTION IS REQUIRED. **
When the Verify Field option is run on the various files, several
different kinds of warnings can be generated. It isn't possible to
describe a resolution method for the type of warning discovered using the
FM Verify field option, but here are some techniques used during testing.
If you require additional technical assistance, contact the EVS group.
Technical post-install notes are included at the end of the patch
Known problems:
WKLD CODE (#64)
========================
--UNIT FOR COUNT-- POINTER
ENTRY# PROCEDURE ERROR
1504 Shell Vial Technique No '68' in pointed-to File
description. These technical notes can be used by the IRM service to
This broken pointer will be correct with the install. No action required.
=======================
--RELEASE DATE-- DATE
1749 Misc Chem Test 5
1 86023;ICPT( Missing
1753 Misc Chem Test 9
1 80100;ICPT( Missing
prevent or resolve issues surrounding the installation of this patch. It
Enter a release date to correct this problem.
==========================
--ACTIVATE WKLD CODE-
SET OF CODES
(CHECKING CROSS-REFERENCE)
ENTRY# PROCEDURE ERROR
is impossible to anticipate all potential situations that exist; but the
100074 Lactic Acid~ACA IV "1" not properly Cross-referenced
Re-index the file will correct this problem.
++++++++++++++++++
TOPOGRAPHY FIELD (#61) File
====================
LEDI HL7 (#.09) field
notes address the most common. The key element ensuring successful
POINTER
(CANNOT CHECK CROSS-REFERENCE)
ENTRY# NAME ERROR
22 KIDNEY "1275" fails Input Transform
82 CILIARY GLAND "6417" fails Input Transform
Should either delete the entry if not using this specimen or enter a
correct entry.
installation of the patch depends upon existing files not containing
===========================
VERIFY WHICH FIELD: SNOMED CODE
FREE TEXT
(CHECKING CROSS-REFERENCE)
ENTRY# NAME ERROR
8729 TISSUE Missing
8730 ORGANISM Missing
DIRECTIVE 2004-058 titled VISTA BLOOD BANK SOFTWARE VERSION 5.2.
corrupt data.
Enter missing data, if input transform failure is reported this will be
corrected when patch is installed.
There is also a FM Verify field error 'fails Input Transform' in WKLD
CODE (#64) file that will be corrected with the install of LR*5.2*302.
The screen preventing the selection of LOINC codes with Del (delete)
status will be removed. This will allow LEDI sites to coordinate
transition from deprecated terms to active terms.
The 'DEL' screen will be removed from the following 2 fields:
DEFAULT LOINC CODE (#25) field.
SPECIMEN (#20), sub-file TIME ASPECT (#30), LOINC CODE (#4) field.
NO PRE-INSTALL CORRECTIVE ACTION IS REQUIRED for these errors.
Other types of errors may require assistance from the EVS technical teams
before proceeding.
PRE-INSTALL ROUTINE
Note: The pre-install routine will produce a listing of duplicate(s)
contained in WKLD CODE (#64) file if any are present.
Those duplicates listed with a proceeding '*' SHOULD be resolved
This patch will update the WKLD CODE (#64) file and replace several
before installation of the patch. However, the patch will install if the
duplicates are present during installation.
Those duplicates listed with a proceeding '+' will be deleted by the
pre-install program. No action is required.
Those duplicates that do not have a preceding character will not
affect the installation. Those entries that do not have a proceeding
character are locally created NLT codes and are provided to indicate to
the local user that multiples do exist. This information maybe useful
when doing searches on the WKLD DATA (#64.1) file for a particular
test(s).
laboratory standardized files associated with National Laboratory Test
Example of listing:
Checking WKLD CODE file (#64) for duplicate names or numbers.
+Blood Products Administration^2633
+Blood Products Administration^3214
+CPK MB/CPK Tot^3702
+CPK MB/CPK Tot^3767
(NLT) package and Logical Observation Identifier Naming Codes (LOINC)
+Coagulation Factor VIII Inhib~BLOOD CENTER OF SE WISCONSIN^100873
Coagulation Factor VIII Inhib~BLOOD CENTER OF SE WISCONSIN^100874
*CPK MB/CPT Tot~BLOOD CENTER OF SE WISCONSIN^100973
*CPK MB/CPT Tot~BLOOD CENTER OF SE WISCONSIN^100974
+Hypersensitivity Pneumonitis^1557
+Hypersensitivity Pneumonitis^1600
+89026.0000 ^1600
coding. (See list below) This patch will remove certain WKLD CODE (#64)
+89026.0000 ^2828
End of duplicate listing.
If '*' duplicates were listed they should be resolved before patch
install.
Those '+' will be removed during the post install.
=====================
file duplicates. This patch will also correct certain field definitions
Routines:
=====================
LRDAGE
This patch contains a NEW age calculation routine, LRDAGE. This routine
is used to calculate the age of the patient based on when the specimen
was collected instead of date of birth (DOB). For example, if the
specimen was collected one year ago, the age will be a year less than
today's age. The routine is particularly useful in pediatric patient's
normal ranges. This age is used to determine the appropriate normal range
based on collection date. This patch expands the age format to include
that produce invalid warnings produced by the FileMan Verify Field
day, month or year designation. This could affect the $SELECT statement
evaluation of normal range. Sites are advised to review $SELECT statement
in light of this age format. The format of the age is as follows:
1hr - 30 days = 1dy - 30dy
1 - 23 months = 1mo - 24mo
>23 month = 2yr - 999yr
The default age of 99yr is return if a computation error occurs because
of incorrect values passed to age API. Technical information for the API
call is contained in the routine documentation section.
The functionality of this routine is not implemented by the patch
option. In order to implement the numerous file/field corrections, it is
installation. However, sites requiring the ability to determine age to
this degree, may wish to migrate their local M code in the EXECUTE CODE
(#62.07) and DELTA CHECKS (#62.1) files to make use of this routine.
Routine Summary:
================
The following is a list of the routine(s) included in this patch. The
second line of each of these routine(s) will look like:
necessary to completely replace certain referenced NLT and LOINC files.
<tab>;;5.2;LAB SERVICE;**[patch list]**;Sep 27, 1994
CHECK^XTSUMBLD results
Routine Checksum Checksum
Name Before Patch After Patch Patch List
======= ============ =========== ==========
LR302 N/A 7036526 302 (Deleted by KIDS)
LR302A N/A 4415522 302
LR302P N/A 3800106 302
To ensure that this patch does not introduce any new data validation
LR302PO N/A 9375744 302
LR302POA N/A 2988034 302
LRDAGE 1480375 1454485 279,302
ASSOCIATED NOIS:
===============
MAR-1104-21653
errors, it is desirable that the data currently stored pointing to
TEST SITES:
==========
Long Beach, CA VAMC
Durham, NC VAMC
San Diego, CA VAMC
Muskogee, OK VAMC
Cheyenne, WY
Hines, IL
Martinsburg, WV
Brockton, MA
replaced files is valid and errors resolved.
Boston Health Care System
Cheyenne, WY
Required Builds:
==========================
LR*5.2*263
LR*5.2*274
LR*5.2*279
Installation Instructions:
=========================
The patch LR*5.2*302 KIDS build file named LR52_302.KID stored in the
ASCII format can be obtained from the following Office of Information
Field Offices (OIFOs) ANONYMOUS SOFTWARE directories
OIFO FTP Address Directory
Albany ftp.fo-albany.domain.ext anonymous.software
Hines ftp.fo-hines.domain.ext anonymous.software
Salt Lake ftp.fo-slc.domain.ext anonymous.software
All users may remain on the system. Installation time is less than 30
minutes.
Note: The patch should be installed during off peak hours.
No laboratory background jobs need to be stopped. No options need to be
placed out of service.
LABORATORY USERS MUST NOT ACCESSION SPECIMENS OR ENTER/VERIFY RESULTS
DURING THE INSTALLATION because several reference files are being deleted
File # File Name Update Method
and replaced with this patch.
============================
From the Kernel Installation & Distribution System (KIDS) menu
1. Use the 'Load a Distribution' option to load the
LR_52_302.KID file onto your system.
2. The patch has now been loaded into a Transport global
64.061 LAB ELECTRONIC CODES Replaced
on your system. You now need to use KIDS to install
the Transport global.
On the KIDS menu, under the 'Installation' menu, use
the following options:
Print Transport Global
Compare Transport Global to Current System
Verify Checksums in Transport Global
Backup a Transport Global
3. Users may remain on the system, but installation
should be done at off peak hours.
64.062 LAB ELECTRONIC SUBTYPES Replaced
4. Installation time is less than 30 minutes during off
peak hours and less than 45 minutes during peak hours.
5. Installation of this patch requires no additional
memory space.
6. From the 'Installation Menu' of the KIDS menu, run the
option
'Install Package(s)' Select the package 'LR*5.2*302'
and proceed with the install.
7. When prompted 'Want KIDS to INHIBIT LOGONS during the
install? YES//' respond NO.
64.2 WKLD SUFFIX CODES Replaced
8. When prompted 'Want to DISABLE scheduled Options, Menu
Options, and Protocols? YES//' respond NO.
================
Example of install:
Select Installation Option: LOAD a Distribution
Enter a Host File: LR_52_302.KID
64.3 WKLD INSTRUMENT MANUFACTURER Replaced
KIDS Distribution saved on Dec 09, 2004@04:27:46
Comment: NLT/LOINC v2.13 Update
This Distribution contains Transport Globals for the following Package(s):
LR*5.2*302
OK to continue with Load? NO// YES
Distribution OK!
EFFECT ON BLOOD BANK FUNCTIONAL REQUIREMENTS: Patch LR*5.2*302 does not
64.81 LAB NLT/CPT CODES Replaced
Want to Continue with Load? YES//
Loading Distribution...
Build LR*5.2*302 has an Enviromental Check Routine
Want to RUN the Environment Check Routine? YES//
LR*5.2*302
Will first run the Environment Check Routine, LR302
95.3 LAB LOINC Replaced
Checking WKLD CODE file (#64) for duplicate names or numbers
End of duplicate listing.
If duplicates were listed they should be resolved before patch install
--- Environment Check is Ok ---
Sending install loaded alert to mail group G.LMI
95.31 LAB LOINC COMPONENT Replaced
Using VA FileMan menu "UTILITY FUNCTIONS",
perform the option "VERIFY FIELDS",
MODIFY WHAT FILE: WKLD CODE
VERIFY WHICH FIELD: ALL
DO YOU MEAN ALL THE FIELDS IN THE FILE? YES
Ensure that this option runs CLEANLY before installation of this patch.
Use INSTALL NAME: LR*5.2*302 to install this Distribution.
Select Installation Option: VERify Checksums in Transport Global
Select INSTALL NAME: LR*5.2*302 Loaded from Distribution
12/9/04@01:53:23
=> NLT/LOINC v2.13 Update ;Created on Dec 09, 2004@04:27:46
*64 WKLD CODE Updated with new terms.
This Distribution was loaded on Dec 09, 2004@01:53:23 with header of
NLT/LOINC v2.13 Update ;Created on Dec 09, 2004@04:27:46
It consisted of the following Install(s):
LR*5.2*302
DEVICE: HOME// TELNET TO ALPHAS
6 Routine checked, 0 failed.
Select Installation Option: INStall Package(s)
Select INSTALL NAME: LR*5.2*302
=> NLT/LOINC v2.13 Update ;Created on Dec 09, 2004@04:27:46
This Distribution was loaded on Dec 09, 2004@01:53:23 with header of
NLT/LOINC v2.13 Update ;Created on Dec 09, 2004@04:27:46
It consisted of the following Install(s):
LR*5.2*302
Checking Install for Package LR*5.2*302
============================
Will first run the Environment Check Routine, LR302
Checking WKLD CODE file (#64) for duplicate names or numbers
End of duplicate listing.
If duplicates were listed they should be resolved before patch install
--- Environment Check is Ok ---
LOINC Copyright acknowledgement:
Sending install loaded alert to mail group G.LMI
Using VA FileMan menu "UTILITY FUNCTIONS",
perform the option "VERIFY FIELDS",
MODIFY WHAT FILE: WKLD CODE
VERIFY WHICH FIELD: ALL
LOINC was Copyrighted 1995, 1996, 1997, by Regenstrief Institute and the
DO YOU MEAN ALL THE FIELDS IN THE FILE? YES
Ensure that this option runs CLEANLY before installation of this patch.
Install Questions for LR*5.2*302
Incoming Files:
61 TOPOGRAPHY FIELD (Partial Definition)
Logical Observation Identifier Names and Codes (LOINC) Committee. All
Note: You already have the 'TOPOGRAPHY FIELD' File.
64 WKLD CODE
Note: You already have the 'WKLD CODE' File.
64.061 LAB ELECTRONIC CODES (including data)
Note: You already have the 'LAB ELECTRONIC CODES' File.
I will OVERWRITE your data with mine.
64.062 LAB ELECTRONIC SUBTYPES (including data)
alter or modify any software design safeguards or safety critical
rights reserved. LOINC is a trademark of the Regenstrief Institute.
Note: You already have the 'LAB ELECTRONIC SUBTYPES' File.
I will OVERWRITE your data with mine.
64.2 WKLD SUFFIX CODES (including data)
Note: You already have the 'WKLD SUFFIX CODES' File.
I will OVERWRITE your data with mine.
64.21 WKLD CODE LAB SECT (including data)
Note: You already have the 'WKLD CODE LAB SECT' File.
I will OVERWRITE your data with mine.
Contact information:
64.22 WKLD ITEM FOR COUNT (including data)
Note: You already have the 'WKLD ITEM FOR COUNT' File.
I will OVERWRITE your data with mine.
64.3 WKLD INSTRUMENT MANUFACTURER (including data)
Note: You already have the 'WKLD INSTRUMENT MANUFACTURER' File.
I will OVERWRITE your data with mine.
64.81 LAB NLT/CPT CODES (including data)
LOINC
Note: You already have the 'LAB NLT/CPT CODES' File.
I will OVERWRITE your data with mine.
68.2 LOAD/WORK LIST
Note: You already have the 'LOAD/WORK LIST' File.
95.3 LAB LOINC (including data)
Note: You already have the 'LAB LOINC' File.
I will OVERWRITE your data with mine.
C/o Regenstrief Institute
95.31 LAB LOINC COMPONENT (including data)
Note: You already have the 'LAB LOINC COMPONENT' File.
I will OVERWRITE your data with mine.
Want KIDS to INHIBIT LOGONs during the install? YES// NO
Want to DISABLE Scheduled Options,Menu Options, and Protocols? YES// NO
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
1001 West 10th Street, RHC-5
DEVICE: HOME// TELNET TO ALPHAS
Complete
LR*5.2*302
Install Started for LR*5.2*302 :
Dec 09, 2004@01:57:39
Build Distribution Date: Dec 09, 2004
Indianapolis, Indiana 46202 USA
Installing Routines:
Dec 09, 2004@01:57:39
Running Pre-Install Routine: PRE^LR302
** Saving Pointer Values **
Saving File #60 data.
Saving File #61 data.
Saving File #62.05 data.
Saving File #62.4 data.
Saving File #62.8 data.
Saving File #62.85 data.
Saving File #62.9 data.
========================
Saving File #64.2 data.
.......
Saving File #68.2 data.
Saving File #69.6 data.
.......................................................................
*** Preinstall completed ***
Installing Data Dictionaries:
VistA Laboratory Package LAB LOINC (#95.3) file does not support all of
Dec 09, 2004@01:59:41
Installing Data:
Dec 09, 2004@02:04:45
Running Post-Install Routine: POST^LR302
Updating DSS Feeder Key for AP NLT Codes
Update DSS AP Feeder Key Complete
the fields contained in the LOINC database. Refer to the LOINC user's
Building List Of Added NLT CODEs
Sending message to LMI Mail Group.
List Of Added WKLD CODEs Complete
Processing data for File/Subfile #60.01
elements functions.
manual for more field details. The following fields are imported and
Processing data for File/Subfile #61
Processing data for File/Subfile #62.05
Processing data for File/Subfile #62.4
Processing data for File/Subfile #62.85
Processing data for File/Subfile #64.2
............
supported within VistA.
Processing data for File/Subfile #68.2
Processing data for File/Subfile #69.6
.......................................................................
Processing data for File/Subfile #69.64
.......................................................................
Historical data restored
Sending install completion alert to mail group G.LMI
LR*5.2*302
--------------------------------------------------
Using VA FileMan menu "UTILITY FUNCTIONS",
perform the option "VERIFY FIELDS",
MODIFY WHAT FILE: WKLD CODE
# Loinc Term VistA name
VERIFY WHICH FIELD: ALL
DO YOU MEAN ALL THE FIELDS IN THE FILE? YES
Updating Routine file...
Updating KIDS files...
LR*5.2*302 Installed. Dec 09, 2004@02:13:10
1 LOINC_NUM CODE + CHECK DIGIT
Install Completed
Loading of patch LR*5.2*302 completed on Dec 09, 2004@01:57:10
LIM: Review description for LR*5.2*302 use KIDS:Utilities: Build File
Print
Installation of patch LR*5.2*302 completed on Dec 09, 2004@02:13
2 COMPONENT COMPONENT + LAB LOINC COMPONENT (95.31)
POST INSTALLATION INSTRUCTIONS:
=============================
Review installed LOINC codes to ensure that codes with the status of
Deprecated (DEL) are not used in your current mapping of LOINC codes. In
some cases, deprecated LOINC codes [LAB LOINC (#95.3) file, MAP TO (#21)
field] will have the suggested replacement LOINC code populated.
Note:
If your site is a HOST LEDI site, changing of any LOINC or NLT codes
should be coordinated the collection site to ensure that both sites agree
in LOINC and NLT mappings.
3 PROPERTY PROPERTY
LR*5.2*302 Technical Install Notes:
=========================
This patch is attempting to clean-up the following files:
File # File Name Update Method
64.061 LAB ELECTRONIC CODES Replaced
64.062 LAB ELECTRONIC SUBTYPES Replaced
64.2 WKLD SUFFIX CODES Replaced
64.3 WKLD INSTRUMENT MANUFACTURE Replaced
4 TIME_ASPECT TIME ASPECT
64.81 LAB NLT/CPT CODES Replaced
95.3 LAB LOINC Replaced
95.31 LAB LOINC COMPONENT Replaced
*64 WKLD CODE Updated
The currently installed files are not compatible with the incoming LOINC
V2.13. Therefore these files are being completely removed and a fresh
5 SYSTEM SYSTEM
version is being installed. When the new versions are installed certain
pointers in other files could be broken or incorrect.
To address this problem, the pre-install routine will save the existing
data in external format in the ^XTMP("LR302",FILE,IEN,FLD)=DATA
This file will be purged in 90 days.
All the fields that point to the replaced files will be saved before the
old files are purged.
The post-install routine will:
6 SCALE_TYPE SCALE TYPE
1) Add any missing WKLD CODE to your system and create a mail message
containing the added codes. If this process is successful the LAB NLT/CPT
CODES (#64.81) should be empty of WKLD CODES.
2) Compare your previous WKLD SUFFIX CODES (#64.2) to the file installed
by the patch. A MailMan message is created listing any locally added.
These codes must be requested via the mail group indicated in the patch
description. Codes should not be locally added to any of the NLT Package
files.
RISK ANALYSIS: Changes made by patch LR*5.2*302 have no effect on Blood
7 METHOD_TYPE METHOD TYPE
3) Re-index WKLD CODE file
4) Re-point the fields stored in the ^XTMP("LR302",FILE,IEN,FLD)=DATA
file. If errors occur during the re-pointing process the wording "ERROR"
will appear during the post-install.
The error is stored in this format.
S ^XTMP("LR302","LRERR",LRCNT)=LRFILE_U_LRIEN_U_LRFLD_U_LRDATA
The file will be purged in 90 days.
9 CLASS CLASSTYPE
You will have to manually enter the appropriate value.
10 SOURCE SOURCE
14 DT_LAST_CH DATE LAST CHANGED
15 CHNG_REAS CHANGE REASON
16 CHNG_TYPE CHANGE TYPE
19 STATUS STATUS
20 MAP_TO MAP TO
23 VA_CD VA CODE
59 SHORTNAME SHORTNAME
Bank software functionality, therefore RISK is none.
Because several standardized files are being completely replaced, the
pre-install routine will extract and save the values of the fields
pointing to the replaced files.
The complete WKLD SUFFIX CODES (#64.2) file is saved into
^XTMP("LRNLT642") global for 90 days. The ^XTMP("LRNLT642") file can be
used to assist those sites that may have mistakenly added terms to the
(#64.2) file. Those local terms not included in the installed file should
|
