DINIT2A1 ;SFISC/MKO-KEY AND INDEX FILES ;8:42 AM 4 Jun 1999
;;22.2;VA FileMan;;Jan 05, 2016;Build 42
;;Per VA Directive 6402, this routine should not be modified.
;;Submitted to OSEHRA 5 January 2015 by the VISTA Expertise Network.
;;Based on Medsphere Systems Corporation's MSC FileMan 1051.
;;Licensed under the terms of the Apache License, Version 2.0.
;
F I=1:2 S X=$T(Q+I) Q:X="" S Y=$E($T(Q+I+1),4,999),X=$E(X,4,999) S:$A(Y)=126 I=I+1,Y=$E(Y,2,999)_$E($T(Q+I+1),5,99) S:$A(Y)=61 Y=$E(Y,2,999) S @X=Y
G ^DINIT2A2
Q Q
;;^DD(.11,.42,21,5,0)
;;=the FileMan Sort and Print (EN1^DIP).
;;^DD(.11,.42,21,6,0)
;;=
;;^DD(.11,.42,21,7,0)
;;=SORTING ONLY - The index name starts with "A". Calls to Classic FileMan
;;^DD(.11,.42,21,8,0)
;;=lookup (^DIC) or the Finder (FIND^DIC or $$FIND1^DIC) will not use this
;;^DD(.11,.42,21,9,0)
;;=index unless it is specified in the input parameters. The index will be
;;^DD(.11,.42,21,10,0)
;;=available for use by the FileMan Sort and Print (EN1^DIP).
;;^DD(.11,.42,21,11,0)
;;=
;;^DD(.11,.42,21,12,0)
;;=ACTION - The index name starts with "A". This is used for M code that
;;^DD(.11,.42,21,13,0)
;;=performs some actions and does NOT build an index. Therefore, it is not
;;^DD(.11,.42,21,14,0)
;;=available for use by either the Classic FileMan lookup (^DIC), the Finder
;;^DD(.11,.42,21,15,0)
;;=(FIND^DIC or $$FIND1^DIC) or the Sort and Print (EN1^DIP).
;;^DD(.11,.42,"DT")
;;=2980416
;;^DD(.11,.5,0)
;;=ROOT TYPE^S^I:INDEX FILE;W:WHOLE FILE;^0;8^Q
;;^DD(.11,.5,3)
;;=Answer '??' for more help.
;;^DD(.11,.5,21,0)
;;=^^6^6^2980911^
;;^DD(.11,.5,21,1,0)
;;=Answer 'I' if the fields that make up the file are defined at the same
;;^DD(.11,.5,21,2,0)
;;=level at which the index is located.
;;^DD(.11,.5,21,3,0)
;;=
;;^DD(.11,.5,21,4,0)
;;=Answer 'W' if this is a whole file cross-reference in which the fields
;;^DD(.11,.5,21,5,0)
;;=that make up the index are defined in a subfile, but the index is
;;^DD(.11,.5,21,6,0)
;;=physically located at a parent file level.
;;^DD(.11,.5,"DT")
;;=2980908
;;^DD(.11,.51,0)
;;=ROOT FILE^RNJ20,7^^0;9^K:+X'=X!(X>999999999999)!(X<0)!(X?.E1"."8N.N) X
;;^DD(.11,.51,1,0)
;;=^.1
;;^DD(.11,.51,1,1,0)
;;=.11^AC
;;^DD(.11,.51,1,1,1)
;;=S ^DD("IX","AC",$E(X,1,30),DA)=""
;;^DD(.11,.51,1,1,2)
;;=K ^DD("IX","AC",$E(X,1,30),DA)
;;^DD(.11,.51,1,1,3)
;;=Lets FileMan find indexes defined on fields from a particular file
;;^DD(.11,.51,1,1,"DT")
;;=2980929
;;^DD(.11,.51,3)
;;=Type a Number between 0 and 999999999999, 7 Decimal Digits. Answer '??' for more help.
;;^DD(.11,.51,21,0)
;;=^^3^3^2980910^
;;^DD(.11,.51,21,1,0)
;;=Answer with the number of the file or subfile where this index is defined.
;;^DD(.11,.51,21,2,0)
;;=For whole file indexes, answer with the subfile number, not the number of
;;^DD(.11,.51,21,3,0)
;;=the file where the index physically resides.
;;^DD(.11,.51,"DT")
;;=2980929
;;^DD(.11,1.1,0)
;;=SET LOGIC^RK^^1;E1,245^K:$L(X)>245 X D:$D(X) ^DIM
;;^DD(.11,1.1,3)
;;=Answer must be Standard M code. Answer '??' for more help.
;;^DD(.11,1.1,9)
;;=@
;;^DD(.11,1.1,21,0)
;;=^^16^16^2990430^^
;;^DD(.11,1.1,21,1,0)
;;=Answer with the M code that FileMan should execute when the values of
;;^DD(.11,1.1,21,2,0)
;;=fields that make up the cross-reference are set or changed. When field
;;^DD(.11,1.1,21,3,0)
;;=values are changed, FileMan executes first the KILL LOGIC, then the SET
;;^DD(.11,1.1,21,4,0)
;;=LOGIC.
;;^DD(.11,1.1,21,5,0)
;;=
;;^DD(.11,1.1,21,6,0)
;;=Assume the DA array describes the record to be cross-referenced, and that
;;^DD(.11,1.1,21,7,0)
;;=the X(order#) array contains values after the transform for storage is
;;^DD(.11,1.1,21,8,0)
;;=applied, but before the truncation to the maximum length. The variable X
;;^DD(.11,1.1,21,9,0)
;;=also equals X(order#) of the lowest order number.
;;^DD(.11,1.1,21,10,0)
;;=
;;^DD(.11,1.1,21,11,0)
;;=When fields that make up a cross-reference are edited and the kill and set
;;^DD(.11,1.1,21,12,0)
;;=logic are executed, the X1(order#) array contains the old field values,
;;^DD(.11,1.1,21,13,0)
;;=and the X2(order#) array contains the new field values. If a record is
;;^DD(.11,1.1,21,14,0)
;;=being added, and there is an X1(order#) array element that corresponds to
;;^DD(.11,1.1,21,15,0)
;;=the .01 field, it is set to null. When a record is deleted, all X2(order#)
;;^DD(.11,1.1,21,16,0)
;;=array elements are null.
;;^DD(.11,1.1,"DT")
;;=2960116
;;^DD(.11,1.2,0)
;;=OVERFLOW SET LOGIC^.111^^1.2;0
;;^DD(.11,1.2,"DT")
;;=2960124
;;^DD(.11,1.3,0)
;;=SET CONDITION^F^^1.3;E1,245^K:$L(X)>245!($L(X)<1) X
;;^DD(.11,1.3,3)
;;=Answer must be a valid FileMan computed expression. Answer '??' for more help.
;;^DD(.11,1.3,21,0)
;;=^^5^5^2960124^
;;^DD(.11,1.3,21,1,0)
;;=Answer with a FileMan computed expression that will evaluate to Boolean
;;^DD(.11,1.3,21,2,0)
;;=true (according to the M rules for Boolean interpretation). FileMan will
;;^DD(.11,1.3,21,3,0)
;;=evaluate this expression whenever it would normally execute the
;;^DD(.11,1.3,21,4,0)
;;=cross-reference's Set Logic, and will not execute the Set Logic unless
;;^DD(.11,1.3,21,5,0)
;;=this condition evaluates to true.
;;^DD(.11,1.3,"DT")
;;=2960116
;;^DD(.11,1.4,0)
;;=SET CONDITION CODE^K^^1.4;E1,245^K:$L(X)>245 X D:$D(X) ^DIM
;;^DD(.11,1.4,3)
;;=This is Standard MUMPS code. Answer '??' for more help.
;;^DD(.11,1.4,9)
;;=@
;;^DD(.11,1.4,21,0)
;;=^^15^15^2990430^
;;^DD(.11,1.4,21,1,0)
;;=This is MUMPS code that sets the variable X. The SET LOGIC is executed
;;^DD(.11,1.4,21,2,0)
;;=only if the SET CONDTION, if present, sets X to Boolean true (according to
;;^DD(.11,1.4,21,3,0)
;;=M rules for Boolean interpretation).
;;^DD(.11,1.4,21,4,0)
;;=
;;^DD(.11,1.4,21,5,0)
;;=Assume the DA array describes the record to be cross-referenced, and that
;;^DD(.11,1.4,21,6,0)
;;=the X(order#) array contains values after the transform for storage is
;;^DD(.11,1.4,21,7,0)
;;=applied, but before the truncation to the maximum length. The variable X
;;^DD(.11,1.4,21,8,0)
;;=also equals X(order#) of the lowest order number.
;;^DD(.11,1.4,21,9,0)
;;=
;;^DD(.11,1.4,21,10,0)
;;=When fields that make up a cross-reference are edited and the kill and set
;;^DD(.11,1.4,21,11,0)
;;=conditions are executed, the X1(order#) array contains the old field
;;^DD(.11,1.4,21,12,0)
;;=values, and the X2(order#) array contains the new field values. If a
;;^DD(.11,1.4,21,13,0)
;;=record is being added, and there is an X1(order#) array element that
;;^DD(.11,1.4,21,14,0)
;;=corresponds to the .01 field, it is set to null. When a record is deleted,
;;^DD(.11,1.4,21,15,0)
;;=all X2(order#) array elements are null.
;;^DD(.11,1.4,"DT")
;;=2970117
;;^DD(.11,2.1,0)
;;=KILL LOGIC^RK^^2;E1,245^K:$L(X)>245 X D:$D(X) ^DIM
;;^DD(.11,2.1,3)
;;=Answer must be Standard M code. Answer '??' for more help.
--- Routine Detail --- with STRUCTURED ROUTINE LISTING ---[H[J[2J[HDINIT2A1 7174 printed Oct 16, 2024@18:51:58 Page 2
DINIT2A1 ;SFISC/MKO-KEY AND INDEX FILES ;8:42 AM 4 Jun 1999
+1 ;;22.2;VA FileMan;;Jan 05, 2016;Build 42
+2 ;;Per VA Directive 6402, this routine should not be modified.
+3 ;;Submitted to OSEHRA 5 January 2015 by the VISTA Expertise Network.
+4 ;;Based on Medsphere Systems Corporation's MSC FileMan 1051.
+5 ;;Licensed under the terms of the Apache License, Version 2.0.
+6 ;
+7 FOR I=1:2
SET X=$TEXT(Q+I)
if X=""
QUIT
SET Y=$EXTRACT($TEXT(Q+I+1),4,999)
SET X=$EXTRACT(X,4,999)
if $ASCII(Y)=126
SET I=I+1
SET Y=$EXTRACT(Y,2,999)_$EXTRACT($TEXT(Q+I+1),5,99)
if $ASCII(Y)=61
SET Y=$EXTRACT(Y,2,999)
SET @X=Y
+8 GOTO ^DINIT2A2
Q QUIT
+1 ;;^DD(.11,.42,21,5,0)
+2 ;;=the FileMan Sort and Print (EN1^DIP).
+3 ;;^DD(.11,.42,21,6,0)
+4 ;;=
+5 ;;^DD(.11,.42,21,7,0)
+6 ;;=SORTING ONLY - The index name starts with "A". Calls to Classic FileMan
+7 ;;^DD(.11,.42,21,8,0)
+8 ;;=lookup (^DIC) or the Finder (FIND^DIC or $$FIND1^DIC) will not use this
+9 ;;^DD(.11,.42,21,9,0)
+10 ;;=index unless it is specified in the input parameters. The index will be
+11 ;;^DD(.11,.42,21,10,0)
+12 ;;=available for use by the FileMan Sort and Print (EN1^DIP).
+13 ;;^DD(.11,.42,21,11,0)
+14 ;;=
+15 ;;^DD(.11,.42,21,12,0)
+16 ;;=ACTION - The index name starts with "A". This is used for M code that
+17 ;;^DD(.11,.42,21,13,0)
+18 ;;=performs some actions and does NOT build an index. Therefore, it is not
+19 ;;^DD(.11,.42,21,14,0)
+20 ;;=available for use by either the Classic FileMan lookup (^DIC), the Finder
+21 ;;^DD(.11,.42,21,15,0)
+22 ;;=(FIND^DIC or $$FIND1^DIC) or the Sort and Print (EN1^DIP).
+23 ;;^DD(.11,.42,"DT")
+24 ;;=2980416
+25 ;;^DD(.11,.5,0)
+26 ;;=ROOT TYPE^S^I:INDEX FILE;W:WHOLE FILE;^0;8^Q
+27 ;;^DD(.11,.5,3)
+28 ;;=Answer '??' for more help.
+29 ;;^DD(.11,.5,21,0)
+30 ;;=^^6^6^2980911^
+31 ;;^DD(.11,.5,21,1,0)
+32 ;;=Answer 'I' if the fields that make up the file are defined at the same
+33 ;;^DD(.11,.5,21,2,0)
+34 ;;=level at which the index is located.
+35 ;;^DD(.11,.5,21,3,0)
+36 ;;=
+37 ;;^DD(.11,.5,21,4,0)
+38 ;;=Answer 'W' if this is a whole file cross-reference in which the fields
+39 ;;^DD(.11,.5,21,5,0)
+40 ;;=that make up the index are defined in a subfile, but the index is
+41 ;;^DD(.11,.5,21,6,0)
+42 ;;=physically located at a parent file level.
+43 ;;^DD(.11,.5,"DT")
+44 ;;=2980908
+45 ;;^DD(.11,.51,0)
+46 ;;=ROOT FILE^RNJ20,7^^0;9^K:+X'=X!(X>999999999999)!(X<0)!(X?.E1"."8N.N) X
+47 ;;^DD(.11,.51,1,0)
+48 ;;=^.1
+49 ;;^DD(.11,.51,1,1,0)
+50 ;;=.11^AC
+51 ;;^DD(.11,.51,1,1,1)
+52 ;;=S ^DD("IX","AC",$E(X,1,30),DA)=""
+53 ;;^DD(.11,.51,1,1,2)
+54 ;;=K ^DD("IX","AC",$E(X,1,30),DA)
+55 ;;^DD(.11,.51,1,1,3)
+56 ;;=Lets FileMan find indexes defined on fields from a particular file
+57 ;;^DD(.11,.51,1,1,"DT")
+58 ;;=2980929
+59 ;;^DD(.11,.51,3)
+60 ;;=Type a Number between 0 and 999999999999, 7 Decimal Digits. Answer '??' for more help.
+61 ;;^DD(.11,.51,21,0)
+62 ;;=^^3^3^2980910^
+63 ;;^DD(.11,.51,21,1,0)
+64 ;;=Answer with the number of the file or subfile where this index is defined.
+65 ;;^DD(.11,.51,21,2,0)
+66 ;;=For whole file indexes, answer with the subfile number, not the number of
+67 ;;^DD(.11,.51,21,3,0)
+68 ;;=the file where the index physically resides.
+69 ;;^DD(.11,.51,"DT")
+70 ;;=2980929
+71 ;;^DD(.11,1.1,0)
+72 ;;=SET LOGIC^RK^^1;E1,245^K:$L(X)>245 X D:$D(X) ^DIM
+73 ;;^DD(.11,1.1,3)
+74 ;;=Answer must be Standard M code. Answer '??' for more help.
+75 ;;^DD(.11,1.1,9)
+76 ;;=@
+77 ;;^DD(.11,1.1,21,0)
+78 ;;=^^16^16^2990430^^
+79 ;;^DD(.11,1.1,21,1,0)
+80 ;;=Answer with the M code that FileMan should execute when the values of
+81 ;;^DD(.11,1.1,21,2,0)
+82 ;;=fields that make up the cross-reference are set or changed. When field
+83 ;;^DD(.11,1.1,21,3,0)
+84 ;;=values are changed, FileMan executes first the KILL LOGIC, then the SET
+85 ;;^DD(.11,1.1,21,4,0)
+86 ;;=LOGIC.
+87 ;;^DD(.11,1.1,21,5,0)
+88 ;;=
+89 ;;^DD(.11,1.1,21,6,0)
+90 ;;=Assume the DA array describes the record to be cross-referenced, and that
+91 ;;^DD(.11,1.1,21,7,0)
+92 ;;=the X(order#) array contains values after the transform for storage is
+93 ;;^DD(.11,1.1,21,8,0)
+94 ;;=applied, but before the truncation to the maximum length. The variable X
+95 ;;^DD(.11,1.1,21,9,0)
+96 ;;=also equals X(order#) of the lowest order number.
+97 ;;^DD(.11,1.1,21,10,0)
+98 ;;=
+99 ;;^DD(.11,1.1,21,11,0)
+100 ;;=When fields that make up a cross-reference are edited and the kill and set
+101 ;;^DD(.11,1.1,21,12,0)
+102 ;;=logic are executed, the X1(order#) array contains the old field values,
+103 ;;^DD(.11,1.1,21,13,0)
+104 ;;=and the X2(order#) array contains the new field values. If a record is
+105 ;;^DD(.11,1.1,21,14,0)
+106 ;;=being added, and there is an X1(order#) array element that corresponds to
+107 ;;^DD(.11,1.1,21,15,0)
+108 ;;=the .01 field, it is set to null. When a record is deleted, all X2(order#)
+109 ;;^DD(.11,1.1,21,16,0)
+110 ;;=array elements are null.
+111 ;;^DD(.11,1.1,"DT")
+112 ;;=2960116
+113 ;;^DD(.11,1.2,0)
+114 ;;=OVERFLOW SET LOGIC^.111^^1.2;0
+115 ;;^DD(.11,1.2,"DT")
+116 ;;=2960124
+117 ;;^DD(.11,1.3,0)
+118 ;;=SET CONDITION^F^^1.3;E1,245^K:$L(X)>245!($L(X)<1) X
+119 ;;^DD(.11,1.3,3)
+120 ;;=Answer must be a valid FileMan computed expression. Answer '??' for more help.
+121 ;;^DD(.11,1.3,21,0)
+122 ;;=^^5^5^2960124^
+123 ;;^DD(.11,1.3,21,1,0)
+124 ;;=Answer with a FileMan computed expression that will evaluate to Boolean
+125 ;;^DD(.11,1.3,21,2,0)
+126 ;;=true (according to the M rules for Boolean interpretation). FileMan will
+127 ;;^DD(.11,1.3,21,3,0)
+128 ;;=evaluate this expression whenever it would normally execute the
+129 ;;^DD(.11,1.3,21,4,0)
+130 ;;=cross-reference's Set Logic, and will not execute the Set Logic unless
+131 ;;^DD(.11,1.3,21,5,0)
+132 ;;=this condition evaluates to true.
+133 ;;^DD(.11,1.3,"DT")
+134 ;;=2960116
+135 ;;^DD(.11,1.4,0)
+136 ;;=SET CONDITION CODE^K^^1.4;E1,245^K:$L(X)>245 X D:$D(X) ^DIM
+137 ;;^DD(.11,1.4,3)
+138 ;;=This is Standard MUMPS code. Answer '??' for more help.
+139 ;;^DD(.11,1.4,9)
+140 ;;=@
+141 ;;^DD(.11,1.4,21,0)
+142 ;;=^^15^15^2990430^
+143 ;;^DD(.11,1.4,21,1,0)
+144 ;;=This is MUMPS code that sets the variable X. The SET LOGIC is executed
+145 ;;^DD(.11,1.4,21,2,0)
+146 ;;=only if the SET CONDTION, if present, sets X to Boolean true (according to
+147 ;;^DD(.11,1.4,21,3,0)
+148 ;;=M rules for Boolean interpretation).
+149 ;;^DD(.11,1.4,21,4,0)
+150 ;;=
+151 ;;^DD(.11,1.4,21,5,0)
+152 ;;=Assume the DA array describes the record to be cross-referenced, and that
+153 ;;^DD(.11,1.4,21,6,0)
+154 ;;=the X(order#) array contains values after the transform for storage is
+155 ;;^DD(.11,1.4,21,7,0)
+156 ;;=applied, but before the truncation to the maximum length. The variable X
+157 ;;^DD(.11,1.4,21,8,0)
+158 ;;=also equals X(order#) of the lowest order number.
+159 ;;^DD(.11,1.4,21,9,0)
+160 ;;=
+161 ;;^DD(.11,1.4,21,10,0)
+162 ;;=When fields that make up a cross-reference are edited and the kill and set
+163 ;;^DD(.11,1.4,21,11,0)
+164 ;;=conditions are executed, the X1(order#) array contains the old field
+165 ;;^DD(.11,1.4,21,12,0)
+166 ;;=values, and the X2(order#) array contains the new field values. If a
+167 ;;^DD(.11,1.4,21,13,0)
+168 ;;=record is being added, and there is an X1(order#) array element that
+169 ;;^DD(.11,1.4,21,14,0)
+170 ;;=corresponds to the .01 field, it is set to null. When a record is deleted,
+171 ;;^DD(.11,1.4,21,15,0)
+172 ;;=all X2(order#) array elements are null.
+173 ;;^DD(.11,1.4,"DT")
+174 ;;=2970117
+175 ;;^DD(.11,2.1,0)
+176 ;;=KILL LOGIC^RK^^2;E1,245^K:$L(X)>245 X D:$D(X) ^DIM
+177 ;;^DD(.11,2.1,3)
+178 ;;=Answer must be Standard M code. Answer '??' for more help.
