HLCSDR1 ;ALB/RJS - HYBRID LOWER LAYER PROTOCOL 2.2 - 9/13/94 ;08/22/2001 10:16
;;1.6;HEALTH LEVEL SEVEN;**2,22,27,30,34,62**;Oct 13, 1995
;
;This is an implemetation of the HL7 Hybrid Low Layer Protocol
;
START(HLDP,HLRETPRM,HLDREAD,HLDWRITE,HLDSTRT,HLDEND,HLDVER,HLDBSIZE) ;
N HLIND0,HLIND1,HLTRANS,HLCHK,HLACKBLK,HLDOUT0,HLDOUT1,X,HLRETRY
N HLNXST,HLLINE,HLNAK,HLTVV,HLWFLG,HLC1,HLC2
;S X=10 X ^%ZOSF("PRIORITY")
; above line commented-out patch 27, sys mgr will set as needed
S HLWFLG=1
;
1 ; Look to see if there is anything to read in
I $D(HLTRACE) S HLNXST=1 D TRACE^HLCSDR2
D:$P(^HLCS(870,HLDP,0),U,5)'="IDLE" MONITOR^HLCSDR2("IDLE",5,HLDP)
S X=$$READ^HLCSUTL(HLDREAD,HLDBSIZE,.HLTRANS) D TRANS^HLCSDR2(X,.HLTRANS),INITIZE^HLCSDR2
I HLTRANS="VT" G TVV
I HLTRANS'="TIMEOUT" G 1
I 'HLWFLG D PUSH^HLCSQUE(HLDOUT0,HLDOUT1),MONITOR^HLCSDR2("P",2,HLDOUT0,HLDOUT1,"OUT"),MONITOR^HLCSDR2("TIMEOUT",5,HLDP)
G 14
;
TVV ;Read in tvv
I $D(HLTRACE) S HLNXST="TVV" D TRACE^HLCSDR2
D MONITOR^HLCSDR2("READING",5,HLDP)
S X=$$READ^HLCSUTL(HLDREAD,HLDBSIZE,.HLTRANS) D TRANS^HLCSDR2(X,.HLTRANS)
I $L(X)'=3!(HLTRANS'="CR") G 1
S HLNAK=$E(X),HLTVV=X,X=$C(HLDSTRT)_X_$C(13) D CHKSUM^HLCSDR2
I HLNAK="D" D G:HLIND0'<0 2 D MONITOR^HLCSDR2(100,19,HLDP) G EXIT
. S HLIND0=$$ENQUEUE^HLCSQUE(HLDP,"IN"),HLIND1=$P(HLIND0,U,2),HLIND0=+HLIND0
. D MONITOR^HLCSDR2(HLTVV,4,HLDP,HLIND1,"IN")
I HLNAK="N" S X=HLTVV K ^TMP("HLCSDR1",$J,HLDP) D SETNODE2^HLCSDR2 G 9
S HLTRANS="G" D MONITOR^HLCSDR2(105,19,HLDP) G 5
;
2 ; Read in message
I $D(HLTRACE) S HLNXST=2 D TRACE^HLCSDR2
D MONITOR^HLCSDR2("READING",5,HLDP)
S X=$$READ^HLCSUTL(HLDREAD,HLDBSIZE,.HLTRANS) D TRANS^HLCSDR2(X,.HLTRANS)
I HLTRANS="CR" D SETNODE^HLCSDR2(HLIND0,HLIND1,HLTRANS) S X=X_$C(13) D CHKSUM^HLCSDR2 G 2
I HLTRANS="LONGLINE" D SETNODE^HLCSDR2(HLIND0,HLIND1,HLTRANS),CHKSUM^HLCSDR2 G 2
I HLTRANS="TIMEOUT" S HLTRANS="G" D MONITOR^HLCSDR2(106,19,HLDP) G 5
I HLTRANS="FS" G 3
G 2
;
3 ; Check for Validity of data
I $D(HLTRACE) S HLNXST=3 D TRACE^HLCSDR2
D MONITOR^HLCSDR2("VALIDATE",5,HLDP)
S HLCHK=$E(X,$L(X)-7,$L(X)),X=$E(X,1,$L(X)-8)
S HLTRANS=$$VALID1^HLCSDR2("INCOMING MESSAGE",HLCHK,HLIND0,HLIND1)
I HLTRANS="VALID" G 4
D MONITOR^HLCSDR2(107,19,HLDP) G 5
;
4 ; Valid message.
I $D(HLTRACE) S HLNXST=4 D TRACE^HLCSDR2
D MONITOR^HLCSDR2("DONE",5,HLDP),MONITOR^HLCSDR2("A",3,HLDP,HLIND1,"IN"),MONITOR^HLCSDR2("P",2,HLDP,HLIND1,"IN")
D INITIZE^HLCSDR2 G 6
;
5 ; Send NAK When This State is Reached
I $D(HLTRACE) S HLNXST=5 D TRACE^HLCSDR2
D MONITOR^HLCSDR2("NAK",5,HLDP),MONITOR^HLCSDR2(HLTRANS,3,HLDP,HLIND1,"IN"),MONITOR^HLCSDR2("P",2,HLDP,HLIND1,"IN")
D NAK^HLCSDR2(HLTRANS)
D INITIZE^HLCSDR2 G 1
;
6 ;Check "OUT" queue
I $D(HLTRACE) S HLNXST=6 D TRACE^HLCSDR2
S HLDOUT0=$$DEQUEUE^HLCSQUE(HLDP,"OUT")
I +HLDOUT0<0 G 1
S HLDOUT1=$P(HLDOUT0,U,2),HLDOUT0=+HLDOUT0,HLRETRY=-1 G 7
;
7 ; Send Data to other Application
I HLRETRY=HLRETPRM D MONITOR^HLCSDR2(103,19,HLDP),MONITOR^HLCSDR2("G",3,HLDP,HLDOUT1,"OUT"),MONITOR^HLCSDR2("D",2,HLDP,HLDOUT1,"OUT") G 14
I $D(HLTRACE) S HLNXST=7 D TRACE^HLCSDR2
D MONITOR^HLCSDR2("WRITING",5,HLDP)
D WRITE^HLCSDR2(HLDOUT0,HLDOUT1)
; set message status to 'done'
D MONITOR^HLCSDR2("D",2,HLDP,HLDOUT1,"OUT") G 1
;
9 ; Read in Neg Acknowledgement message
I $D(HLTRACE) S HLNXST=9 D TRACE^HLCSDR2
S X=$$READ^HLCSUTL(HLDWRITE,HLDBSIZE,.HLTRANS) D TRANS^HLCSDR2(X,.HLTRANS),MONITOR^HLCSDR2("READ ACK",5,HLDP)
I HLTRANS="CR" D SETNODE2^HLCSDR2 S X=X_$C(13) D CHKSUM^HLCSDR2 G 9
I HLTRANS="FS" G 10
I HLTRANS="LONGLINE" D SETNODE2^HLCSDR2,CHKSUM^HLCSDR2
S HLRETRY=HLRETRY+1 D MONITOR^HLCSDR2("P",2,HLDP,HLDOUT1,"OUT") G 7
;
10 ; Check Validity of Neg Acknowledgement
I $D(HLTRACE) S HLNXST=10 D TRACE^HLCSDR2
D MONITOR^HLCSDR2("VALIDATE NACK",5,HLDP)
S HLCHK=$E(X,$L(X)-7,$L(X)),X=$E(X,1,$L(X)-8)
S HLTRANS=$$VALID1^HLCSDR2("LLP-NACK",HLCHK)
I HLTRANS="VALID" G 12
S HLRETRY=HLRETRY+1 D MONITOR^HLCSDR2("P",2,HLDP,HLDOUT1,"OUT") G 7
;
12 ; Process Negative Acknowlegement
I $D(HLTRACE) S HLNXST=12 D TRACE^HLCSDR2
S HLACKBLK=$E(^TMP("HLCSDR1",$J,HLDP,2))
D MONITOR^HLCSDR2($S("^B^C^X^"[(U_HLACKBLK_U):HLACKBLK,1:"G"),3,HLDP,HLDOUT1,"OUT")
S HLRETRY=HLRETRY+1 D MONITOR^HLCSDR2("P",2,HLDP,HLDOUT1,"OUT") G 7
;
14 ; Make sure we should still be running
I $D(HLTRACE) S HLNXST=14 D TRACE^HLCSDR2
I $P($G(^HLCS(870,HLDP,0)),U,15)=1 G EXIT ; Shutdown receiver
I $D(HLTRACE) U IO(0) W !,"Type Q to Quit: " R X:1 I "^Q^q^"[(U_X_U) S $P(^HLCS(870,HLDP,0),U,15)=1 G EXIT ; Shutdown receiver
G 6
;
EXIT ;
D MONITOR^HLCSDR2("SHUTDOWN",5,HLDP)
Q
--- Routine Detail --- with STRUCTURED ROUTINE LISTING ---[H[J[2J[HHLCSDR1 4705 printed Oct 16, 2024@17:57:13 Page 2
HLCSDR1 ;ALB/RJS - HYBRID LOWER LAYER PROTOCOL 2.2 - 9/13/94 ;08/22/2001 10:16
+1 ;;1.6;HEALTH LEVEL SEVEN;**2,22,27,30,34,62**;Oct 13, 1995
+2 ;
+3 ;This is an implemetation of the HL7 Hybrid Low Layer Protocol
+4 ;
START(HLDP,HLRETPRM,HLDREAD,HLDWRITE,HLDSTRT,HLDEND,HLDVER,HLDBSIZE) ;
+1 NEW HLIND0,HLIND1,HLTRANS,HLCHK,HLACKBLK,HLDOUT0,HLDOUT1,X,HLRETRY
+2 NEW HLNXST,HLLINE,HLNAK,HLTVV,HLWFLG,HLC1,HLC2
+3 ;S X=10 X ^%ZOSF("PRIORITY")
+4 ; above line commented-out patch 27, sys mgr will set as needed
+5 SET HLWFLG=1
+6 ;
1 ; Look to see if there is anything to read in
+1 IF $DATA(HLTRACE)
SET HLNXST=1
DO TRACE^HLCSDR2
+2 if $PIECE(^HLCS(870,HLDP,0),U,5)'="IDLE"
DO MONITOR^HLCSDR2("IDLE",5,HLDP)
+3 SET X=$$READ^HLCSUTL(HLDREAD,HLDBSIZE,.HLTRANS)
DO TRANS^HLCSDR2(X,.HLTRANS)
DO INITIZE^HLCSDR2
+4 IF HLTRANS="VT"
GOTO TVV
+5 IF HLTRANS'="TIMEOUT"
GOTO 1
+6 IF 'HLWFLG
DO PUSH^HLCSQUE(HLDOUT0,HLDOUT1)
DO MONITOR^HLCSDR2("P",2,HLDOUT0,HLDOUT1,"OUT")
DO MONITOR^HLCSDR2("TIMEOUT",5,HLDP)
+7 GOTO 14
+8 ;
TVV ;Read in tvv
+1 IF $DATA(HLTRACE)
SET HLNXST="TVV"
DO TRACE^HLCSDR2
+2 DO MONITOR^HLCSDR2("READING",5,HLDP)
+3 SET X=$$READ^HLCSUTL(HLDREAD,HLDBSIZE,.HLTRANS)
DO TRANS^HLCSDR2(X,.HLTRANS)
+4 IF $LENGTH(X)'=3!(HLTRANS'="CR")
GOTO 1
+5 SET HLNAK=$EXTRACT(X)
SET HLTVV=X
SET X=$CHAR(HLDSTRT)_X_$CHAR(13)
DO CHKSUM^HLCSDR2
+6 IF HLNAK="D"
Begin DoDot:1
+7 SET HLIND0=$$ENQUEUE^HLCSQUE(HLDP,"IN")
SET HLIND1=$PIECE(HLIND0,U,2)
SET HLIND0=+HLIND0
+8 DO MONITOR^HLCSDR2(HLTVV,4,HLDP,HLIND1,"IN")
End DoDot:1
if HLIND0'<0
GOTO 2
DO MONITOR^HLCSDR2(100,19,HLDP)
GOTO EXIT
+9 IF HLNAK="N"
SET X=HLTVV
KILL ^TMP("HLCSDR1",$JOB,HLDP)
DO SETNODE2^HLCSDR2
GOTO 9
+10 SET HLTRANS="G"
DO MONITOR^HLCSDR2(105,19,HLDP)
GOTO 5
+11 ;
2 ; Read in message
+1 IF $DATA(HLTRACE)
SET HLNXST=2
DO TRACE^HLCSDR2
+2 DO MONITOR^HLCSDR2("READING",5,HLDP)
+3 SET X=$$READ^HLCSUTL(HLDREAD,HLDBSIZE,.HLTRANS)
DO TRANS^HLCSDR2(X,.HLTRANS)
+4 IF HLTRANS="CR"
DO SETNODE^HLCSDR2(HLIND0,HLIND1,HLTRANS)
SET X=X_$CHAR(13)
DO CHKSUM^HLCSDR2
GOTO 2
+5 IF HLTRANS="LONGLINE"
DO SETNODE^HLCSDR2(HLIND0,HLIND1,HLTRANS)
DO CHKSUM^HLCSDR2
GOTO 2
+6 IF HLTRANS="TIMEOUT"
SET HLTRANS="G"
DO MONITOR^HLCSDR2(106,19,HLDP)
GOTO 5
+7 IF HLTRANS="FS"
GOTO 3
+8 GOTO 2
+9 ;
3 ; Check for Validity of data
+1 IF $DATA(HLTRACE)
SET HLNXST=3
DO TRACE^HLCSDR2
+2 DO MONITOR^HLCSDR2("VALIDATE",5,HLDP)
+3 SET HLCHK=$EXTRACT(X,$LENGTH(X)-7,$LENGTH(X))
SET X=$EXTRACT(X,1,$LENGTH(X)-8)
+4 SET HLTRANS=$$VALID1^HLCSDR2("INCOMING MESSAGE",HLCHK,HLIND0,HLIND1)
+5 IF HLTRANS="VALID"
GOTO 4
+6 DO MONITOR^HLCSDR2(107,19,HLDP)
GOTO 5
+7 ;
4 ; Valid message.
+1 IF $DATA(HLTRACE)
SET HLNXST=4
DO TRACE^HLCSDR2
+2 DO MONITOR^HLCSDR2("DONE",5,HLDP)
DO MONITOR^HLCSDR2("A",3,HLDP,HLIND1,"IN")
DO MONITOR^HLCSDR2("P",2,HLDP,HLIND1,"IN")
+3 DO INITIZE^HLCSDR2
GOTO 6
+4 ;
5 ; Send NAK When This State is Reached
+1 IF $DATA(HLTRACE)
SET HLNXST=5
DO TRACE^HLCSDR2
+2 DO MONITOR^HLCSDR2("NAK",5,HLDP)
DO MONITOR^HLCSDR2(HLTRANS,3,HLDP,HLIND1,"IN")
DO MONITOR^HLCSDR2("P",2,HLDP,HLIND1,"IN")
+3 DO NAK^HLCSDR2(HLTRANS)
+4 DO INITIZE^HLCSDR2
GOTO 1
+5 ;
6 ;Check "OUT" queue
+1 IF $DATA(HLTRACE)
SET HLNXST=6
DO TRACE^HLCSDR2
+2 SET HLDOUT0=$$DEQUEUE^HLCSQUE(HLDP,"OUT")
+3 IF +HLDOUT0<0
GOTO 1
+4 SET HLDOUT1=$PIECE(HLDOUT0,U,2)
SET HLDOUT0=+HLDOUT0
SET HLRETRY=-1
GOTO 7
+5 ;
7 ; Send Data to other Application
+1 IF HLRETRY=HLRETPRM
DO MONITOR^HLCSDR2(103,19,HLDP)
DO MONITOR^HLCSDR2("G",3,HLDP,HLDOUT1,"OUT")
DO MONITOR^HLCSDR2("D",2,HLDP,HLDOUT1,"OUT")
GOTO 14
+2 IF $DATA(HLTRACE)
SET HLNXST=7
DO TRACE^HLCSDR2
+3 DO MONITOR^HLCSDR2("WRITING",5,HLDP)
+4 DO WRITE^HLCSDR2(HLDOUT0,HLDOUT1)
+5 ; set message status to 'done'
+6 DO MONITOR^HLCSDR2("D",2,HLDP,HLDOUT1,"OUT")
GOTO 1
+7 ;
9 ; Read in Neg Acknowledgement message
+1 IF $DATA(HLTRACE)
SET HLNXST=9
DO TRACE^HLCSDR2
+2 SET X=$$READ^HLCSUTL(HLDWRITE,HLDBSIZE,.HLTRANS)
DO TRANS^HLCSDR2(X,.HLTRANS)
DO MONITOR^HLCSDR2("READ ACK",5,HLDP)
+3 IF HLTRANS="CR"
DO SETNODE2^HLCSDR2
SET X=X_$CHAR(13)
DO CHKSUM^HLCSDR2
GOTO 9
+4 IF HLTRANS="FS"
GOTO 10
+5 IF HLTRANS="LONGLINE"
DO SETNODE2^HLCSDR2
DO CHKSUM^HLCSDR2
+6 SET HLRETRY=HLRETRY+1
DO MONITOR^HLCSDR2("P",2,HLDP,HLDOUT1,"OUT")
GOTO 7
+7 ;
10 ; Check Validity of Neg Acknowledgement
+1 IF $DATA(HLTRACE)
SET HLNXST=10
DO TRACE^HLCSDR2
+2 DO MONITOR^HLCSDR2("VALIDATE NACK",5,HLDP)
+3 SET HLCHK=$EXTRACT(X,$LENGTH(X)-7,$LENGTH(X))
SET X=$EXTRACT(X,1,$LENGTH(X)-8)
+4 SET HLTRANS=$$VALID1^HLCSDR2("LLP-NACK",HLCHK)
+5 IF HLTRANS="VALID"
GOTO 12
+6 SET HLRETRY=HLRETRY+1
DO MONITOR^HLCSDR2("P",2,HLDP,HLDOUT1,"OUT")
GOTO 7
+7 ;
12 ; Process Negative Acknowlegement
+1 IF $DATA(HLTRACE)
SET HLNXST=12
DO TRACE^HLCSDR2
+2 SET HLACKBLK=$EXTRACT(^TMP("HLCSDR1",$JOB,HLDP,2))
+3 DO MONITOR^HLCSDR2($SELECT("^B^C^X^"[(U_HLACKBLK_U):HLACKBLK,1:"G"),3,HLDP,HLDOUT1,"OUT")
+4 SET HLRETRY=HLRETRY+1
DO MONITOR^HLCSDR2("P",2,HLDP,HLDOUT1,"OUT")
GOTO 7
+5 ;
14 ; Make sure we should still be running
+1 IF $DATA(HLTRACE)
SET HLNXST=14
DO TRACE^HLCSDR2
+2 ; Shutdown receiver
IF $PIECE($GET(^HLCS(870,HLDP,0)),U,15)=1
GOTO EXIT
+3 ; Shutdown receiver
IF $DATA(HLTRACE)
USE IO(0)
WRITE !,"Type Q to Quit: "
READ X:1
IF "^Q^q^"[(U_X_U)
SET $PIECE(^HLCS(870,HLDP,0),U,15)=1
GOTO EXIT
+4 GOTO 6
+5 ;
EXIT ;
+1 DO MONITOR^HLCSDR2("SHUTDOWN",5,HLDP)
+2 QUIT
