LRCKFLAA ;DALOI/RWF/RLM-CHECK LOAD LIST & AUTO INSTRUMENT FILES (CONT);2/5/91 12:32
;;5.2;LAB SERVICE;**272**;Sep 27, 1994
; Reference to CHK^DIE supported by IA #2053
; Reference to $$FMTE^XLFDT supported by IA #10103
; Reference to ^VA(200 supported by IA #10060
;
Q ;Continuation of LRCKFLA
TRAY ; validation of RUN or TRAY NUMBER subfile data elements (Node 1).
; Several multiples are contained within this subfile:
; RUN or TRAY NUMBER (multiple #68.21)
; SEQUENCE or CUP NUMBER (multiple #68.22)
; TESTS (multiple #68.222)
; TEST or PANEL NUMBER (multiple #68.225)
I LRWARN,$D(^LRO(68.2,DA,1,0))[0 D LABEL S @LRTMPGL@(DA,"68.2,2")=">>WARNING<< - Missing nodes at the RUN OR TRAY NUMBER subfile (Multiple #68.21)." Q
S RUN=0 F S RUN=$O(^LRO(68.2,DA,1,RUN)) Q:RUN<1 I $D(^(RUN,0))#2 S LA1=^(0) D TRAYV
Q
TRAYV ;
I $D(^VA(200,+$P(LA1,U,3),0))[0 D LABEL S @LRTMPGL@(DA,1,RUN,"68.21,3")=">>FATAL<< - Invalid TECH pointer to NEW PERSON file (#200) for entry "_RUN_" at RUN or TRAY NUMBER subfile."
I $D(^LRO(68,+$P(LA1,U,4),0))[0 D LABEL S @LRTMPGL@(DA,1,RUN,"68.21,4")=">>FATAL<< - Invalid ACCESSION AREA pointer to ACCESSION file (#68) for entry "_RUN_" at RUN or TRAY NUMBER subfile."
S Z="",X=$P($G(^LRO(68,+$P(LA1,U,4),0)),U) I $L(X) D CHK^DIE(68.21,4,"E",X,.Z) I Z=U D
. D LABEL S @LRTMPGL@(DA,1,RUN,"68.21,4",1)=">>CRITICAL<< - The value '"_X_"' for field ACCESSION AREA in RUN or TRAY NUMBER subfile is not valid. Only accession areas identified as work areas are valid. Entry: "_RUN
S SEQ=0 F S SEQ=$O(^LRO(68.2,DA,1,RUN,1,SEQ)) Q:SEQ<1 I $D(^(SEQ,0))#2 S LA1S=^(0) D SEQCUP
Q
SEQCUP ; validation for data elements at SEQUENCE or CUP NUMBER, TESTS multiples at the RUN or TRAY NUMBER subfile
I $D(^LRO(68,+$P(LA1S,U),0))[0 D LABEL D
. S @LRTMPGL@(DA,1,RUN,SEQ,"68.22,.01")=">>FATAL<< - Invalid ACCESSION AREA pointer to ACCESSION file (#68) found in SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile. Entry: "_RUN_" Subentry: "_SEQ
S Z="",X=$P($G(^LRO(68,$P(LA1S,U),0)),U) I $L(X) D CHK^DIE(68.22,.01,"E",X,.Z) I Z=U D
. D LABEL S @LRTMPGL@(DA,1,RUN,SEQ,"68.22,.01",1)=">>CRITICAL<< - The value '"_X_"' for field ACCESSION AREA in SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile is not valid."
. S @LRTMPGL@(DA,1,RUN,SEQ,"68.22,.01",2)="Only accession area identified as work areas are valid. Entry: "_RUN_" Subentry: "_SEQ
D CHK^DIE(68.22,3,"E",$P(LA1S,U,4),.Z) I Z=U D LABEL D
. S @LRTMPGL@(DA,1,RUN,SEQ,"68.22,3")=">>FATAL<< - The value '"_$P(LA1S,U,4)_"' for field PROFILE in SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile is not valid. Entry: "_RUN_" Subentry: "_SEQ
I $L($P(LA1S,U,5)),$D(^LAB(61,$P(LA1S,U,5),0))[0 D LABEL D
. S @LRTMPGL@(DA,1,RUN,SEQ,"68.22,4")=">>FATAL<< - Invalid SPECIMEN pointer to TOPOGRAPHY FIELD file (#61) found in SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile. Entry: "_RUN_" Subentry: "_SEQ
S TST=0 F S TST=$O(^LRO(68.2,DA,1,RUN,1,SEQ,1,TST)) Q:TST<1 I $D(^(TST,0))#2 S LA1T=+^(0) I $D(^LAB(60,LA1T,0))[0 D LABEL D
. S @LRTMPGL@(DA,1,RUN,SEQ,TST,"68.222,.01")=">>FATAL<< - Invalid TEST pointer to LABORATORY TEST file (#60) found in TESTS multiple within the SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile. Entry: "_RUN_" Subentry: "_SEQ
Q
PROFILE ; validation of PROFILE subfile data elements (node 10)
; Several multiples are contained within this subfile:
; PROFILE (multiple #68.23)
; TEST (multiple #68.24)
; TRAY # FOR CONTROL (multiple #68.25)
; CONTROL (multiple #68.26)
; CONTROLS TO BEGIN WORKLIST (multiple #68.28)
; CONTROLS TO END WORKLIST (multiple #68.29)
I LRWARN,$D(^LRO(68.2,DA,10,0))[0 D LABEL S @LRTMPGL@(DA,"68.2,50")=">>WARNING<<- PROFILE subfile NOT defined." Q
S PROF=0,LRPROF="" F S PROF=$O(^LRO(68.2,DA,10,PROF)) Q:PROF<1 D PROFILV
Q
PROFILV ;
I $D(^LRO(68.2,DA,10,PROF,0))[0 D LABEL S @LRTMPGL@(DA,10,PROF,"68.23,.01")=">>FATAL - Missing PROFILE subfile for entry "_PROF Q
S:$D(^LRO(68.2,DA,10,PROF,0))#2 LA10="profile: "_^(0)
I $D(^LRO(68,+$P(LA10,U,2),0))[0 D LABEL S @LRTMPGL@(DA,10,PROF,"68.23,2")=">>FATAL<< - Invalid ACCESSION AREA pointer to the ACCESSION file (#68) at the PROFILE subfile for entry "_PROF
S X=$P($G(^LRO(68,+$P(LA10,U,2),0)),U),Z="" I $L(X) D CHK^DIE(68.23,2,"E",X,.Z) I Z=U D LABEL D
. S @LRTMPGL@(DA,10,PROF,"68.23,2",1)=">>CRITICAL<< - The value '"_X_"' for field ACCESSION AREA in PROFILE subfile is not valid. Only accession areas identified as work areas are valid. Entry: "_PROF
S B=1,I=0 F S I=$O(^LRO(68.2,DA,10,PROF,1,I)) Q:I<1 I $D(^(I,0))#2 D
. S X=^(0),B=(B&$P(X,U,3)) I $D(^LAB(60,+X,0))[0 D LABEL S @LRTMPGL@(DA,10,PROF,I,"63.24,.01")=">>FATAL<< - Invalid TEST pointer to the LABORATORY TEST file (#60) at the TEST multiple of the PROFILE subfile. Entry: "_PROF_" Subentry: "_I
I B D LABEL S @LRTMPGL@(DA,10,PROF,1,I,"68.24,2")=">>FATAL<< - At least one test of the panel must NOT be BUILD LABEL ONLY at the TEST multiple of the PROFILE subfile."
I LRWARN,'$P(LA,U,3) S C1=$O(^LRO(68.2,DA,10,PROF,2,1)) I C1>0 D LABEL S @LRTMPGL@(DA,10,PROF,2,1,"68.23,3")=">>WARNING<< - A sequence/batch should NOT have a control TRAY "_C1_" defined. Entry: "_PROF
F LR45=4,5 D
. D SET45
. S C=0 F S C=$O(^LRO(68.2,DA,10,PROF,LR45,C)) Q:C'>0 I $D(^(C,0))#2 S X=+^(0) D CHKCTR
Q
CHKCTR ; validation of data elements at the CONTROLS TO BEGIN WORKLIST, CONTROLS TO END WORKLIST multiples
I $D(^LAB(62.3,X,0))[0 D LABEL S @LRTMPGL@(DA,10,PROF,LR45,C,LRFIELD)=">>FATAL<< - Invalid CONTROLS TO "_LRLIT_" WORKLIST pointer to LAB CONTROL NAME file (#62.3). Entry: "_PROF_" Subentry: "_C Q
S (B,J)=0 F S J=$O(^LAB(62.3,X,2,J)) Q:J<1 I $D(^(J,0))#2 S T=+^(0) I $D(^LRO(68.2,DA,10,PROF,1,"B",T)) S B=1
I 'B D LABEL S @LRTMPGL@(DA,10,PROF,LR45,C,LRFIELD)=">>FATAL<< - CONTROL: "_$P(^LAB(62.3,X,0),U)_" has no tests to accession for this profile for "_LRLIT_" WORKLIST. Entry: "_PROF_" Subentry: "_C
Q:'LRWARN
S LREXPDT=+$P(^LAB(62.3,X,0),U,2)
I 'LREXPDT D LABEL S @LRTMPGL@(DA,10,PROF,LR45,C,LRFIELD)=">>WARNING<< - CONTROL: "_$P(^LAB(62.3,X,0),U)_" does not have an EXPIRATION DATE for "_LRLIT_" WORKLIST. Entry: "_PROF_" Subentry: "_C Q
I LREXPDT<DT D LABEL S @LRTMPGL@(DA,10,PROF,LR45,C,LRFIELD)=">>WARNING<< - CONTROL: "_$P(^LAB(62.3,X,0),U)_" contains an expired EXPIRATION DATE: "_$$FMTE^XLFDT($P(^LAB(62.3,X,0),U,2),"")_" for "_LRLIT_" WORKLIST. Entry: "_PROF_" Subentry: "_C
Q
SUFFIX ; validation of "SUF" node data elements
Q:'$D(^LRO(68.2,DA,"SUF"))
S LASUF=^LRO(68.2,DA,"SUF")
I $D(^LAB(64.2,+LASUF,0))[0 D LABEL S @LRTMPGL@(DA,"68.2,.14")=">>FATAL<< - Invalid WKLD METHOD pointer to WKLD SUFFIX CODES file (#64.2)"
I $L($P(LASUF,U,7)),$D(^LRO(68,+$P(LASUF,U,7),0))[0 D LABEL S @LRTMPGL@(DA,"68.2,1")=">>FATAL<< - Invalid MAJOR ACCESSION AREA pointer to ACCESSION file (#68)"
I $L($P(LASUF,U,8)),$D(^LRO(68,+$P(LASUF,U,8),0))[0 D LABEL S @LRTMPGL@(DA,"68.2,1.5")=">>FATAL<< - Invalid LAB SUBSECTION pointer to ACCESSION file (#68)"
I $L($P(LASUF,U,9)) D
. I $D(^LRO(68,$P(LASUF,U,9),0))[0 D LABEL S @LRTMPGL@(DA,"68.2,1.7")=">>FATAL<< - Invalid WORK AREA pointer to ACCESSION file (#68)" Q
. I LRWARN S X=$P(^LRO(68,$P(LASUF,U,9),0),U),Z="" D CHK^DIE(68.2,1.7,"E",X,.Z) D
. . I Z=U D LABEL S @LRTMPGL@(DA,"68.2,1.7")=">>CRITICAL<< - The value '"_X_"' for field WORK AREA is not valid. Only accession areas identified as work areas are valid."
Q
LABEL ;
I LRDA'=DA S @LRTMPGL@(DA)=$P(LA,U) S LRDA=DA
I $D(LA10),$P(LA10,U)'=LRPROF S (LRPROF,@LRTMPGL@(DA,10,PROF))=$P(LA10,U)
Q
SET45 ;
; variable assignment during processing of controls to begin and end
; worklist data elements
S LRFIELD=$S(LR45=4:"68.28,.01",1:"68.29,.01"),LRLIT=$S(LR45=4:"BEGIN",1:"END")
Q
--- Routine Detail --- with STRUCTURED ROUTINE LISTING ---[H[J[2J[HLRCKFLAA 7902 printed Dec 13, 2024@02:13:47 Page 2
LRCKFLAA ;DALOI/RWF/RLM-CHECK LOAD LIST & AUTO INSTRUMENT FILES (CONT);2/5/91 12:32
+1 ;;5.2;LAB SERVICE;**272**;Sep 27, 1994
+2 ; Reference to CHK^DIE supported by IA #2053
+3 ; Reference to $$FMTE^XLFDT supported by IA #10103
+4 ; Reference to ^VA(200 supported by IA #10060
+5 ;
+6 ;Continuation of LRCKFLA
QUIT
TRAY ; validation of RUN or TRAY NUMBER subfile data elements (Node 1).
+1 ; Several multiples are contained within this subfile:
+2 ; RUN or TRAY NUMBER (multiple #68.21)
+3 ; SEQUENCE or CUP NUMBER (multiple #68.22)
+4 ; TESTS (multiple #68.222)
+5 ; TEST or PANEL NUMBER (multiple #68.225)
+6 IF LRWARN
IF $DATA(^LRO(68.2,DA,1,0))[0
DO LABEL
SET @LRTMPGL@(DA,"68.2,2")=">>WARNING<< - Missing nodes at the RUN OR TRAY NUMBER subfile (Multiple #68.21)."
QUIT
+7 SET RUN=0
FOR
SET RUN=$ORDER(^LRO(68.2,DA,1,RUN))
if RUN<1
QUIT
IF $DATA(^(RUN,0))#2
SET LA1=^(0)
DO TRAYV
+8 QUIT
TRAYV ;
+1 IF $DATA(^VA(200,+$PIECE(LA1,U,3),0))[0
DO LABEL
SET @LRTMPGL@(DA,1,RUN,"68.21,3")=">>FATAL<< - Invalid TECH pointer to NEW PERSON file (#200) for entry "_RUN_" at RUN or TRAY NUMBER subfile."
+2 IF $DATA(^LRO(68,+$PIECE(LA1,U,4),0))[0
DO LABEL
SET @LRTMPGL@(DA,1,RUN,"68.21,4")=">>FATAL<< - Invalid ACCESSION AREA pointer to ACCESSION file (#68) for entry "_RUN_" at RUN or TRAY NUMBER subfile."
+3 SET Z=""
SET X=$PIECE($GET(^LRO(68,+$PIECE(LA1,U,4),0)),U)
IF $LENGTH(X)
DO CHK^DIE(68.21,4,"E",X,.Z)
IF Z=U
Begin DoDot:1
+4 DO LABEL
SET @LRTMPGL@(DA,1,RUN,"68.21,4",1)=">>CRITICAL<< - The value '"_X_"' for field ACCESSION AREA in RUN or TRAY NUMBER subfile is not valid. Only accession areas identified as work areas are valid. Entry: "_RUN
End DoDot:1
+5 SET SEQ=0
FOR
SET SEQ=$ORDER(^LRO(68.2,DA,1,RUN,1,SEQ))
if SEQ<1
QUIT
IF $DATA(^(SEQ,0))#2
SET LA1S=^(0)
DO SEQCUP
+6 QUIT
SEQCUP ; validation for data elements at SEQUENCE or CUP NUMBER, TESTS multiples at the RUN or TRAY NUMBER subfile
+1 IF $DATA(^LRO(68,+$PIECE(LA1S,U),0))[0
DO LABEL
Begin DoDot:1
+2 SET @LRTMPGL@(DA,1,RUN,SEQ,"68.22,.01")=">>FATAL<< - Invalid ACCESSION AREA pointer to ACCESSION file (#68) found in SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile. Entry: "_RUN_" Subentry: "_SEQ
End DoDot:1
+3 SET Z=""
SET X=$PIECE($GET(^LRO(68,$PIECE(LA1S,U),0)),U)
IF $LENGTH(X)
DO CHK^DIE(68.22,.01,"E",X,.Z)
IF Z=U
Begin DoDot:1
+4 DO LABEL
SET @LRTMPGL@(DA,1,RUN,SEQ,"68.22,.01",1)=">>CRITICAL<< - The value '"_X_"' for field ACCESSION AREA in SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile is not valid."
+5 SET @LRTMPGL@(DA,1,RUN,SEQ,"68.22,.01",2)="Only accession area identified as work areas are valid. Entry: "_RUN_" Subentry: "_SEQ
End DoDot:1
+6 DO CHK^DIE(68.22,3,"E",$PIECE(LA1S,U,4),.Z)
IF Z=U
DO LABEL
Begin DoDot:1
+7 SET @LRTMPGL@(DA,1,RUN,SEQ,"68.22,3")=">>FATAL<< - The value '"_$PIECE(LA1S,U,4)_"' for field PROFILE in SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile is not valid. Entry: "_RUN_" Subentry: "_SEQ
End DoDot:1
+8 IF $LENGTH($PIECE(LA1S,U,5))
IF $DATA(^LAB(61,$PIECE(LA1S,U,5),0))[0
DO LABEL
Begin DoDot:1
+9 SET @LRTMPGL@(DA,1,RUN,SEQ,"68.22,4")=">>FATAL<< - Invalid SPECIMEN pointer to TOPOGRAPHY FIELD file (#61) found in SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile. Entry: "_RUN_" Subentry: "_SEQ
End DoDot:1
+10 SET TST=0
FOR
SET TST=$ORDER(^LRO(68.2,DA,1,RUN,1,SEQ,1,TST))
if TST<1
QUIT
IF $DATA(^(TST,0))#2
SET LA1T=+^(0)
IF $DATA(^LAB(60,LA1T,0))[0
DO LABEL
Begin DoDot:1
+11 SET @LRTMPGL@(DA,1,RUN,SEQ,TST,"68.222,.01")=">>FATAL<< - Invalid TEST pointer to LABORATORY TEST file (#60) found in TESTS multiple within the SEQUENCE or CUP NUMBER multiple of RUN or TRAY NUMBER subfile. Entry: "_RUN_" Subent
ry: "_SEQ
End DoDot:1
+12 QUIT
PROFILE ; validation of PROFILE subfile data elements (node 10)
+1 ; Several multiples are contained within this subfile:
+2 ; PROFILE (multiple #68.23)
+3 ; TEST (multiple #68.24)
+4 ; TRAY # FOR CONTROL (multiple #68.25)
+5 ; CONTROL (multiple #68.26)
+6 ; CONTROLS TO BEGIN WORKLIST (multiple #68.28)
+7 ; CONTROLS TO END WORKLIST (multiple #68.29)
+8 IF LRWARN
IF $DATA(^LRO(68.2,DA,10,0))[0
DO LABEL
SET @LRTMPGL@(DA,"68.2,50")=">>WARNING<<- PROFILE subfile NOT defined."
QUIT
+9 SET PROF=0
SET LRPROF=""
FOR
SET PROF=$ORDER(^LRO(68.2,DA,10,PROF))
if PROF<1
QUIT
DO PROFILV
+10 QUIT
PROFILV ;
+1 IF $DATA(^LRO(68.2,DA,10,PROF,0))[0
DO LABEL
SET @LRTMPGL@(DA,10,PROF,"68.23,.01")=">>FATAL - Missing PROFILE subfile for entry "_PROF
QUIT
+2 if $DATA(^LRO(68.2,DA,10,PROF,0))#2
SET LA10="profile: "_^(0)
+3 IF $DATA(^LRO(68,+$PIECE(LA10,U,2),0))[0
DO LABEL
SET @LRTMPGL@(DA,10,PROF,"68.23,2")=">>FATAL<< - Invalid ACCESSION AREA pointer to the ACCESSION file (#68) at the PROFILE subfile for entry "_PROF
+4 SET X=$PIECE($GET(^LRO(68,+$PIECE(LA10,U,2),0)),U)
SET Z=""
IF $LENGTH(X)
DO CHK^DIE(68.23,2,"E",X,.Z)
IF Z=U
DO LABEL
Begin DoDot:1
+5 SET @LRTMPGL@(DA,10,PROF,"68.23,2",1)=">>CRITICAL<< - The value '"_X_"' for field ACCESSION AREA in PROFILE subfile is not valid. Only accession areas identified as work areas are valid. Entry: "_PROF
End DoDot:1
+6 SET B=1
SET I=0
FOR
SET I=$ORDER(^LRO(68.2,DA,10,PROF,1,I))
if I<1
QUIT
IF $DATA(^(I,0))#2
Begin DoDot:1
+7 SET X=^(0)
SET B=(B&$PIECE(X,U,3))
IF $DATA(^LAB(60,+X,0))[0
DO LABEL
SET @LRTMPGL@(DA,10,PROF,I,"63.24,.01")=">>FATAL<< - Invalid TEST pointer to the LABORATORY TEST file (#60) at the TEST multiple of the PROFILE subfile. Entry: "_PROF_" Subentry: "_I
End DoDot:1
+8 IF B
DO LABEL
SET @LRTMPGL@(DA,10,PROF,1,I,"68.24,2")=">>FATAL<< - At least one test of the panel must NOT be BUILD LABEL ONLY at the TEST multiple of the PROFILE subfile."
+9 IF LRWARN
IF '$PIECE(LA,U,3)
SET C1=$ORDER(^LRO(68.2,DA,10,PROF,2,1))
IF C1>0
DO LABEL
SET @LRTMPGL@(DA,10,PROF,2,1,"68.23,3")=">>WARNING<< - A sequence/batch should NOT have a control TRAY "_C1_" defined. Entry: "_PROF
+10 FOR LR45=4,5
Begin DoDot:1
+11 DO SET45
+12 SET C=0
FOR
SET C=$ORDER(^LRO(68.2,DA,10,PROF,LR45,C))
if C'>0
QUIT
IF $DATA(^(C,0))#2
SET X=+^(0)
DO CHKCTR
End DoDot:1
+13 QUIT
CHKCTR ; validation of data elements at the CONTROLS TO BEGIN WORKLIST, CONTROLS TO END WORKLIST multiples
+1 IF $DATA(^LAB(62.3,X,0))[0
DO LABEL
SET @LRTMPGL@(DA,10,PROF,LR45,C,LRFIELD)=">>FATAL<< - Invalid CONTROLS TO "_LRLIT_" WORKLIST pointer to LAB CONTROL NAME file (#62.3). Entry: "_PROF_" Subentry: "_C
QUIT
+2 SET (B,J)=0
FOR
SET J=$ORDER(^LAB(62.3,X,2,J))
if J<1
QUIT
IF $DATA(^(J,0))#2
SET T=+^(0)
IF $DATA(^LRO(68.2,DA,10,PROF,1,"B",T))
SET B=1
+3 IF 'B
DO LABEL
SET @LRTMPGL@(DA,10,PROF,LR45,C,LRFIELD)=">>FATAL<< - CONTROL: "_$PIECE(^LAB(62.3,X,0),U)_" has no tests to accession for this profile for "_LRLIT_" WORKLIST. Entry: "_PROF_" Subentry: "_C
+4 if 'LRWARN
QUIT
+5 SET LREXPDT=+$PIECE(^LAB(62.3,X,0),U,2)
+6 IF 'LREXPDT
DO LABEL
SET @LRTMPGL@(DA,10,PROF,LR45,C,LRFIELD)=">>WARNING<< - CONTROL: "_$PIECE(^LAB(62.3,X,0),U)_" does not have an EXPIRATION DATE for "_LRLIT_" WORKLIST. Entry: "_PROF_" Subentry: "_C
QUIT
+7 IF LREXPDT<DT
DO LABEL
SET @LRTMPGL@(DA,10,PROF,LR45,C,LRFIELD)=">>WARNING<< - CONTROL: "_$PIECE(^LAB(62.3,X,0),U)_" contains an expired EXPIRATION DATE: "_$$FMTE^XLFDT($PIECE(^LAB(62.3,X,0),U,2),"")_" for "_LRLIT_" WORKLIST. Entry: "_PROF_" Subentry: "_C
+8 QUIT
SUFFIX ; validation of "SUF" node data elements
+1 if '$DATA(^LRO(68.2,DA,"SUF"))
QUIT
+2 SET LASUF=^LRO(68.2,DA,"SUF")
+3 IF $DATA(^LAB(64.2,+LASUF,0))[0
DO LABEL
SET @LRTMPGL@(DA,"68.2,.14")=">>FATAL<< - Invalid WKLD METHOD pointer to WKLD SUFFIX CODES file (#64.2)"
+4 IF $LENGTH($PIECE(LASUF,U,7))
IF $DATA(^LRO(68,+$PIECE(LASUF,U,7),0))[0
DO LABEL
SET @LRTMPGL@(DA,"68.2,1")=">>FATAL<< - Invalid MAJOR ACCESSION AREA pointer to ACCESSION file (#68)"
+5 IF $LENGTH($PIECE(LASUF,U,8))
IF $DATA(^LRO(68,+$PIECE(LASUF,U,8),0))[0
DO LABEL
SET @LRTMPGL@(DA,"68.2,1.5")=">>FATAL<< - Invalid LAB SUBSECTION pointer to ACCESSION file (#68)"
+6 IF $LENGTH($PIECE(LASUF,U,9))
Begin DoDot:1
+7 IF $DATA(^LRO(68,$PIECE(LASUF,U,9),0))[0
DO LABEL
SET @LRTMPGL@(DA,"68.2,1.7")=">>FATAL<< - Invalid WORK AREA pointer to ACCESSION file (#68)"
QUIT
+8 IF LRWARN
SET X=$PIECE(^LRO(68,$PIECE(LASUF,U,9),0),U)
SET Z=""
DO CHK^DIE(68.2,1.7,"E",X,.Z)
Begin DoDot:2
+9 IF Z=U
DO LABEL
SET @LRTMPGL@(DA,"68.2,1.7")=">>CRITICAL<< - The value '"_X_"' for field WORK AREA is not valid. Only accession areas identified as work areas are valid."
End DoDot:2
End DoDot:1
+10 QUIT
LABEL ;
+1 IF LRDA'=DA
SET @LRTMPGL@(DA)=$PIECE(LA,U)
SET LRDA=DA
+2 IF $DATA(LA10)
IF $PIECE(LA10,U)'=LRPROF
SET (LRPROF,@LRTMPGL@(DA,10,PROF))=$PIECE(LA10,U)
+3 QUIT
SET45 ;
+1 ; variable assignment during processing of controls to begin and end
+2 ; worklist data elements
+3 SET LRFIELD=$SELECT(LR45=4:"68.28,.01",1:"68.29,.01")
SET LRLIT=$SELECT(LR45=4:"BEGIN",1:"END")
+4 QUIT
