VIAAEUT ;ALB/CR - RTLS Get ENG Information ;5/4/16 9:59am
;;1.0;RTLS;**3**;April 22, 2013;Build 20
;
; Access to file #49 covered by IA #10093
; Access to file #6914 covered by IA #5913
; Access to file #6911 covered by IA #5914
; Access to file #6928 covered by IA #5915
;
Q
; get all the categories from Engineering file #6911
GETCAT(RETSTA,REQDATA,DATAID) ;
; RPC [VIAA ENG GET CATEGORY]
;
; Input: all required
; RETSTA is the name of the return array
; REQDATA = keywords "CATEGORY" or "NAME" or "IEN" only
; 1) DATAID = "ALL" to return all category names
; 2) DATAID = name of the desired category
; 3) DATAID= IEN (number) for the desired category
;
; For all cases: return ien^name of category
;
; Output:
; Global ^TMP("VIAA"_REQDATA,$J) returned via RETSTA which is used
; as a reference, or if there is a failure
; "-###^" concatenated with the reason for failure message, where
; '###' is a 3-digit code
;
N DATA,EIEN,ENCAT,RNS,RECCT
S RNS="VIAA"_REQDATA
;
I $G(REQDATA)=""&($G(DATAID)="") S RETSTA="-400^REQDATA and DATAID parameters are missing." D EX1 Q
I $G(REQDATA)="" S RETSTA="-400^REQDATA parameter is null. Legal values are: CATEGORY, NAME, and IEN." D EX1 Q
I $G(DATAID)="" S RETSTA="-400^DATAID is null. Legal values are: keyword 'ALL', a category name, or a number greater than zero." D EX1 Q
;
I ("^CATEGORY^NAME^IEN^"'[("^"_REQDATA_"^")) D Q
. S RETSTA="-400^REQDATA parameter not recognized." D EX1
;
I REQDATA="CATEGORY" D ALLCAT(REQDATA,DATAID)
I REQDATA="NAME" D NAMECAT(REQDATA,DATAID)
I REQDATA="IEN" D IENCAT(REQDATA,DATAID)
;
EX1 S RETSTA=$S($D(^TMP(RNS,$J)):$NA(^(0)),$D(RETSTA):RETSTA,1:"-404^No data found.")
Q
;
;
ALLCAT(REQDATA,DATAID) ;
; return IENs and names for all equipment categories
;
K ^TMP(RNS,$J)
I DATAID'="ALL" S RETSTA="-400^"_DATAID_" is not valid to get all categories. Expected 'ALL'." Q
S RECCT=0
S ENCAT="" ; engineering category
F EIEN=0:0 S EIEN=$O(^ENG(6911,EIEN)) Q:EIEN'>0 D
. S ENCAT=$$GET1^DIQ(6911,EIEN,.01,"E")
. S RECCT=RECCT+1
. S ^TMP(RNS,$J,RECCT,0)=EIEN_U_ENCAT
I RECCT=0 S ^TMP(RNS,$J,0)="-404^No data found."
S RETSTA=$NA(^TMP(RNS,$J))
Q
;
;
NAMECAT(REQDATA,DATAID) ;
; return IEN and name for one category name
;
S RECCT=0
K ^TMP(RNS,$J)
; if name passed is longer than 30 characters, use special handling
I $L(DATAID)>30 D Q
. N DATAID1,EIEN
. S DATAID1=$E(DATAID,1,30)
. I '$D(^ENG(6911,"B",DATAID1)) S RETSTA="-404^"_DATAID_" was not found in the EQUIPMENT CATEGORY file, #6911." Q
. F EIEN=0:0 S EIEN=$O(^ENG(6911,"B",DATAID1,EIEN)) Q:'EIEN I $P(^ENG(6911,EIEN,0),"^",1)=DATAID S ^TMP(RNS,$J,RECCT+1,0)=EIEN_"^"_$P(^ENG(6911,EIEN,0),"^",1)
;
I '$D(^ENG(6911,"B",DATAID)) S RETSTA="-404^"_DATAID_" was not found in the EQUIPMENT CATEGORY file, #6911." Q
S EIEN=+$O(^ENG(6911,"B",DATAID,""))
S ENCAT=$$GET1^DIQ(6911,EIEN,.01,"E")
S RECCT=RECCT+1
S ^TMP(RNS,$J,RECCT,0)=EIEN_U_ENCAT
S RETSTA=$NA(^TMP(RNS,$J))
Q
;
;
IENCAT(REQDATA,DATAID) ;
; return IEN and name for one IEN category
;
K ^TMP(RNS,$J)
I +DATAID=0 S RETSTA="-400^DATAID cannot be zero for an IEN in the EQUIPMENT CATEGORY file, #6911." Q
I DATAID<0 S RETSTA="-400^"_DATAID_" must be greater than zero for an IEN in the EQUIPMENT CATEGORY file, #6911." Q
I '$D(^ENG(6911,DATAID)) S RETSTA="-404^"_DATAID_" was not found in the EQUIPMENT CATEGORY file, #6911." Q
S RECCT=0
S ENCAT=$$GET1^DIQ(6911,DATAID,.01,"E")
S DATA=DATAID_U_ENCAT
S RECCT=RECCT+1
S ^TMP(RNS,$J,RECCT,0)=DATA
S RETSTA=$NA(^TMP(RNS,$J))
Q
;
; get all locations from Engineering file #6928
GETLOC(RETSTA,REQDATA) ;
; RPC [VIAA ENG GET LOCATION]
;
; Input: all required
; RETSTA is the return array
; REQDATA is the key word "LOCATION" for all locations.
;
; Output:
; Global ^TMP("VIAALOCATION",$J) - all available locations with the
; following fields will be returned:
; IEN, room number, building number, building file pointer,
; division, wing, service, and inverse location
;
N EIEN,ROOMN,BLDNUM,BLDPTR,DIV,SERV,SERVNAM,INVLOC,WING,RECCT,RNS
S RNS="VIAALOCATION"
K ^TMP(RNS,$J)
I $G(REQDATA)="" S ^TMP(RNS,$J,0)="-400^Location cannot be null for look up in the SPACE file, #6928." D EX2 Q
I REQDATA'="LOCATION" S ^TMP(RNS,$J,0)="-400^Keyword 'LOCATION' is missing." D EX2 Q
S ROOMN="",RECCT=0
F EIEN=0:0 S EIEN=$O(^ENG("SP",EIEN)) Q:EIEN'>0 D
. S ROOMN=$$GET1^DIQ(6928,EIEN,.01,"E") ; room number
. S BLDNUM=$$GET1^DIQ(6928,EIEN,.5,"E") ; building number
. S BLDPTR=$$GET1^DIQ(6928,EIEN,.51,"I") ; building pointer
. S DIV=$$GET1^DIQ(6928,EIEN,.6,"E") ; division
. S WING=$$GET1^DIQ(6928,EIEN,1,"E")
. S SERVNAM=$$GET1^DIQ(6928,EIEN,1.5,"E") ; service name
. S INVLOC=$$GET1^DIQ(6928,EIEN,19,"E") ; inversed location
. S RECCT=RECCT+1
. S ^TMP(RNS,$J,RECCT,0)=EIEN_U_ROOMN_U_BLDNUM_U_BLDPTR_U_DIV_U_WING_U_SERVNAM_U_INVLOC
I RECCT=0 S ^TMP(RNS,$J,0)="-404^No data found."
EX2 S RETSTA=$NA(^TMP(RNS,$J))
Q
;
; get the latest entries from Engineering file #6914
LASTEE(RETSTA,REQDATA) ;
; RPC [VIAA ENG GET EQUIPMENT]
;
; Input: all required
; RETSTA is the return array
; REQDATA contains the latest stored EE number from InSites
;
; Output:
; Global ^TMP("VIAALASTEE",$J) - list of most recent EE numbers
; if available, otherwise an error message is sent back to client
;
N EEDIF,I,LASTEE,RECCT,RNS
S RNS="VIAALASTEE"
K ^TMP(RNS,$J)
S RECCT=0
I $G(REQDATA)="" S ^TMP(RNS,$J,0)="-400^EE number cannot be null for look up in EQUIPMENT INV. file, #6914." D EX3 Q
I (REQDATA'>0)!(REQDATA'?1N.10N) S ^TMP(RNS,$J,0)="-400^"_REQDATA_" is not a legal EE number in the EQUIPMENT INV. file, #6914." D EX3 Q
I (REQDATA>9999999999)!(REQDATA<1)!(REQDATA?.E1"."1N.N) D Q
. S ^TMP(RNS,$J,0)="-400^"_REQDATA_" is not a legal EE number in the EQUIPMENT INV. file, #6914." D EX3
I '$D(^ENG(6914,REQDATA)) S ^TMP(RNS,$J,0)="-404^EE number "_REQDATA_" was not found in the EQUIPMENT INV. file, #6914." D EX3 Q
S LASTEE=$P(^ENG(6914,0),"^",3) ; last entry
S EEDIF=LASTEE-REQDATA ; get # of new EE entries
I EEDIF<0 S ^TMP(RNS,$J,0)="-404^EE number "_REQDATA_" was not found in the EQUIPMENT INV. file, #6914." D EX3 Q
F I=1:1:EEDIF D
. S REQDATA=REQDATA+1
. S RECCT=RECCT+1
. S ^TMP(RNS,$J,RECCT,0)=REQDATA
I RECCT=0 S ^TMP(RNS,$J,0)="-404^No new EE entries found."
EX3 S RETSTA=$NA(^TMP(RNS,$J))
Q
--- Routine Detail --- with STRUCTURED ROUTINE LISTING ---[H[J[2J[HVIAAEUT 6609 printed Dec 13, 2024@02:33:11 Page 2
VIAAEUT ;ALB/CR - RTLS Get ENG Information ;5/4/16 9:59am
+1 ;;1.0;RTLS;**3**;April 22, 2013;Build 20
+2 ;
+3 ; Access to file #49 covered by IA #10093
+4 ; Access to file #6914 covered by IA #5913
+5 ; Access to file #6911 covered by IA #5914
+6 ; Access to file #6928 covered by IA #5915
+7 ;
+8 QUIT
+9 ; get all the categories from Engineering file #6911
GETCAT(RETSTA,REQDATA,DATAID) ;
+1 ; RPC [VIAA ENG GET CATEGORY]
+2 ;
+3 ; Input: all required
+4 ; RETSTA is the name of the return array
+5 ; REQDATA = keywords "CATEGORY" or "NAME" or "IEN" only
+6 ; 1) DATAID = "ALL" to return all category names
+7 ; 2) DATAID = name of the desired category
+8 ; 3) DATAID= IEN (number) for the desired category
+9 ;
+10 ; For all cases: return ien^name of category
+11 ;
+12 ; Output:
+13 ; Global ^TMP("VIAA"_REQDATA,$J) returned via RETSTA which is used
+14 ; as a reference, or if there is a failure
+15 ; "-###^" concatenated with the reason for failure message, where
+16 ; '###' is a 3-digit code
+17 ;
+18 NEW DATA,EIEN,ENCAT,RNS,RECCT
+19 SET RNS="VIAA"_REQDATA
+20 ;
+21 IF $GET(REQDATA)=""&($GET(DATAID)="")
SET RETSTA="-400^REQDATA and DATAID parameters are missing."
DO EX1
QUIT
+22 IF $GET(REQDATA)=""
SET RETSTA="-400^REQDATA parameter is null. Legal values are: CATEGORY, NAME, and IEN."
DO EX1
QUIT
+23 IF $GET(DATAID)=""
SET RETSTA="-400^DATAID is null. Legal values are: keyword 'ALL', a category name, or a number greater than zero."
DO EX1
QUIT
+24 ;
+25 IF ("^CATEGORY^NAME^IEN^"'[("^"_REQDATA_"^"))
Begin DoDot:1
+26 SET RETSTA="-400^REQDATA parameter not recognized."
DO EX1
End DoDot:1
QUIT
+27 ;
+28 IF REQDATA="CATEGORY"
DO ALLCAT(REQDATA,DATAID)
+29 IF REQDATA="NAME"
DO NAMECAT(REQDATA,DATAID)
+30 IF REQDATA="IEN"
DO IENCAT(REQDATA,DATAID)
+31 ;
EX1 SET RETSTA=$SELECT($DATA(^TMP(RNS,$JOB)):$NAME(^(0)),$DATA(RETSTA):RETSTA,1:"-404^No data found.")
+1 QUIT
+2 ;
+3 ;
ALLCAT(REQDATA,DATAID) ;
+1 ; return IENs and names for all equipment categories
+2 ;
+3 KILL ^TMP(RNS,$JOB)
+4 IF DATAID'="ALL"
SET RETSTA="-400^"_DATAID_" is not valid to get all categories. Expected 'ALL'."
QUIT
+5 SET RECCT=0
+6 ; engineering category
SET ENCAT=""
+7 FOR EIEN=0:0
SET EIEN=$ORDER(^ENG(6911,EIEN))
if EIEN'>0
QUIT
Begin DoDot:1
+8 SET ENCAT=$$GET1^DIQ(6911,EIEN,.01,"E")
+9 SET RECCT=RECCT+1
+10 SET ^TMP(RNS,$JOB,RECCT,0)=EIEN_U_ENCAT
End DoDot:1
+11 IF RECCT=0
SET ^TMP(RNS,$JOB,0)="-404^No data found."
+12 SET RETSTA=$NAME(^TMP(RNS,$JOB))
+13 QUIT
+14 ;
+15 ;
NAMECAT(REQDATA,DATAID) ;
+1 ; return IEN and name for one category name
+2 ;
+3 SET RECCT=0
+4 KILL ^TMP(RNS,$JOB)
+5 ; if name passed is longer than 30 characters, use special handling
+6 IF $LENGTH(DATAID)>30
Begin DoDot:1
+7 NEW DATAID1,EIEN
+8 SET DATAID1=$EXTRACT(DATAID,1,30)
+9 IF '$DATA(^ENG(6911,"B",DATAID1))
SET RETSTA="-404^"_DATAID_" was not found in the EQUIPMENT CATEGORY file, #6911."
QUIT
+10 FOR EIEN=0:0
SET EIEN=$ORDER(^ENG(6911,"B",DATAID1,EIEN))
if 'EIEN
QUIT
IF $PIECE(^ENG(6911,EIEN,0),"^",1)=DATAID
SET ^TMP(RNS,$JOB,RECCT+1,0)=EIEN_"^"_$PIECE(^ENG(6911,EIEN,0),"^",1)
End DoDot:1
QUIT
+11 ;
+12 IF '$DATA(^ENG(6911,"B",DATAID))
SET RETSTA="-404^"_DATAID_" was not found in the EQUIPMENT CATEGORY file, #6911."
QUIT
+13 SET EIEN=+$ORDER(^ENG(6911,"B",DATAID,""))
+14 SET ENCAT=$$GET1^DIQ(6911,EIEN,.01,"E")
+15 SET RECCT=RECCT+1
+16 SET ^TMP(RNS,$JOB,RECCT,0)=EIEN_U_ENCAT
+17 SET RETSTA=$NAME(^TMP(RNS,$JOB))
+18 QUIT
+19 ;
+20 ;
IENCAT(REQDATA,DATAID) ;
+1 ; return IEN and name for one IEN category
+2 ;
+3 KILL ^TMP(RNS,$JOB)
+4 IF +DATAID=0
SET RETSTA="-400^DATAID cannot be zero for an IEN in the EQUIPMENT CATEGORY file, #6911."
QUIT
+5 IF DATAID<0
SET RETSTA="-400^"_DATAID_" must be greater than zero for an IEN in the EQUIPMENT CATEGORY file, #6911."
QUIT
+6 IF '$DATA(^ENG(6911,DATAID))
SET RETSTA="-404^"_DATAID_" was not found in the EQUIPMENT CATEGORY file, #6911."
QUIT
+7 SET RECCT=0
+8 SET ENCAT=$$GET1^DIQ(6911,DATAID,.01,"E")
+9 SET DATA=DATAID_U_ENCAT
+10 SET RECCT=RECCT+1
+11 SET ^TMP(RNS,$JOB,RECCT,0)=DATA
+12 SET RETSTA=$NAME(^TMP(RNS,$JOB))
+13 QUIT
+14 ;
+15 ; get all locations from Engineering file #6928
GETLOC(RETSTA,REQDATA) ;
+1 ; RPC [VIAA ENG GET LOCATION]
+2 ;
+3 ; Input: all required
+4 ; RETSTA is the return array
+5 ; REQDATA is the key word "LOCATION" for all locations.
+6 ;
+7 ; Output:
+8 ; Global ^TMP("VIAALOCATION",$J) - all available locations with the
+9 ; following fields will be returned:
+10 ; IEN, room number, building number, building file pointer,
+11 ; division, wing, service, and inverse location
+12 ;
+13 NEW EIEN,ROOMN,BLDNUM,BLDPTR,DIV,SERV,SERVNAM,INVLOC,WING,RECCT,RNS
+14 SET RNS="VIAALOCATION"
+15 KILL ^TMP(RNS,$JOB)
+16 IF $GET(REQDATA)=""
SET ^TMP(RNS,$JOB,0)="-400^Location cannot be null for look up in the SPACE file, #6928."
DO EX2
QUIT
+17 IF REQDATA'="LOCATION"
SET ^TMP(RNS,$JOB,0)="-400^Keyword 'LOCATION' is missing."
DO EX2
QUIT
+18 SET ROOMN=""
SET RECCT=0
+19 FOR EIEN=0:0
SET EIEN=$ORDER(^ENG("SP",EIEN))
if EIEN'>0
QUIT
Begin DoDot:1
+20 ; room number
SET ROOMN=$$GET1^DIQ(6928,EIEN,.01,"E")
+21 ; building number
SET BLDNUM=$$GET1^DIQ(6928,EIEN,.5,"E")
+22 ; building pointer
SET BLDPTR=$$GET1^DIQ(6928,EIEN,.51,"I")
+23 ; division
SET DIV=$$GET1^DIQ(6928,EIEN,.6,"E")
+24 SET WING=$$GET1^DIQ(6928,EIEN,1,"E")
+25 ; service name
SET SERVNAM=$$GET1^DIQ(6928,EIEN,1.5,"E")
+26 ; inversed location
SET INVLOC=$$GET1^DIQ(6928,EIEN,19,"E")
+27 SET RECCT=RECCT+1
+28 SET ^TMP(RNS,$JOB,RECCT,0)=EIEN_U_ROOMN_U_BLDNUM_U_BLDPTR_U_DIV_U_WING_U_SERVNAM_U_INVLOC
End DoDot:1
+29 IF RECCT=0
SET ^TMP(RNS,$JOB,0)="-404^No data found."
EX2 SET RETSTA=$NAME(^TMP(RNS,$JOB))
+1 QUIT
+2 ;
+3 ; get the latest entries from Engineering file #6914
LASTEE(RETSTA,REQDATA) ;
+1 ; RPC [VIAA ENG GET EQUIPMENT]
+2 ;
+3 ; Input: all required
+4 ; RETSTA is the return array
+5 ; REQDATA contains the latest stored EE number from InSites
+6 ;
+7 ; Output:
+8 ; Global ^TMP("VIAALASTEE",$J) - list of most recent EE numbers
+9 ; if available, otherwise an error message is sent back to client
+10 ;
+11 NEW EEDIF,I,LASTEE,RECCT,RNS
+12 SET RNS="VIAALASTEE"
+13 KILL ^TMP(RNS,$JOB)
+14 SET RECCT=0
+15 IF $GET(REQDATA)=""
SET ^TMP(RNS,$JOB,0)="-400^EE number cannot be null for look up in EQUIPMENT INV. file, #6914."
DO EX3
QUIT
+16 IF (REQDATA'>0)!(REQDATA'?1N.10N)
SET ^TMP(RNS,$JOB,0)="-400^"_REQDATA_" is not a legal EE number in the EQUIPMENT INV. file, #6914."
DO EX3
QUIT
+17 IF (REQDATA>9999999999)!(REQDATA<1)!(REQDATA?.E1"."1N.N)
Begin DoDot:1
+18 SET ^TMP(RNS,$JOB,0)="-400^"_REQDATA_" is not a legal EE number in the EQUIPMENT INV. file, #6914."
DO EX3
End DoDot:1
QUIT
+19 IF '$DATA(^ENG(6914,REQDATA))
SET ^TMP(RNS,$JOB,0)="-404^EE number "_REQDATA_" was not found in the EQUIPMENT INV. file, #6914."
DO EX3
QUIT
+20 ; last entry
SET LASTEE=$PIECE(^ENG(6914,0),"^",3)
+21 ; get # of new EE entries
SET EEDIF=LASTEE-REQDATA
+22 IF EEDIF<0
SET ^TMP(RNS,$JOB,0)="-404^EE number "_REQDATA_" was not found in the EQUIPMENT INV. file, #6914."
DO EX3
QUIT
+23 FOR I=1:1:EEDIF
Begin DoDot:1
+24 SET REQDATA=REQDATA+1
+25 SET RECCT=RECCT+1
+26 SET ^TMP(RNS,$JOB,RECCT,0)=REQDATA
End DoDot:1
+27 IF RECCT=0
SET ^TMP(RNS,$JOB,0)="-404^No new EE entries found."
EX3 SET RETSTA=$NAME(^TMP(RNS,$JOB))
+1 QUIT
