XUXTADPRT1 ;ESL/JAC/CM - UTL Printing subroutines & extrinsics #1 ; 06/26/2020@9:30
;;8.0;KERNEL;**807**;Oct 16, 2024;Build 56;
;
;
; External API'S
;
; XUXTAD API's
GXDATE(AXUXTADDATE,AXUXTADTIME,AXUXTADSECS,AXUXTADFORMAT) Q $$DATE^XUXTADDT1($G(AXUXTADDATE),$G(AXUXTADTIME),$G(AXUXTADSECS),$G(AXUXTADFORMAT))
DIERR(AXUXTADWIDTH,AXUXTADLFTMAR,AXUXTADMSGROOT,AXUXTADFRMRTN,AXUXTADNOPAUSE) D DIERR^XUXTADDILG($G(AXUXTADWIDTH),$G(AXUXTADLFTMAR),$G(AXUXTADMSGROOT),$G(AXUXTADFRMRTN),$G(AXUXTADNOPAUSE)) Q
; Helper Functions/API's
FMDATE() Q $$DT^XLFDT
FMNOW() Q $$NOW^XLFDT
CNVDT D ^%DT Q
TOLW(AP) X ^%ZOSF($G(AP))
FMDIFF(ATIMEEND,ATIMEBEG,ADS) Q $$FMDIFF^XLFDT($G(ATIMEEND),$G(ATIMEBEG),$G(ADS))
GETS(ADIQGR,ADA,ADR,ADIQGPARM,ADIQGTA,ADIQGERRA,ADIQGIPAR) D GETS^DIQ($G(ADIQGR),$G(ADA),$G(ADR),$G(ADIQGPARM),$G(ADIQGTA),$G(ADIQGERRA),$G(ADIQGIPAR)) Q
;
;-- Integration Control Registrations
; Reference to ^%DT in ICR #10003
; Reference to GETS^DIQ in ICR #2056
; Reference to ^%ZOSF("RM" in ICR #10096 All nodes exported by Kernel are useable.
; Reference to $$FMDIFF^XLFDT in ICR #10103
; Reference to $$NOW^XLFDT in ICR #10103
;
CENTER(XUXTADTEXT,XUXTADLF,XUXTADRM,XUXTADRVIDEO) ;
; Line feed, then write heading (or any text) centered. Optionally
; display the text in reverse video.
;
;-- Input:
; XUXTADTEXT.. ; Required ; Text to be centered
; XUXTADLF.... ; Optional ; Number of line feeds issued before writing
; the centered text (defaults to 1)
; XUXTADRM.....; Right Margin (defaults to IOM)
; XUXTADRVIDEO ; 0 for normal display (default is 0)
; 1 to display text in reverse video
;-- Output:
; No output variables will be returned.
;-- Intended use:
; This API call allows the developer to center text messages
; displayed to the user. You can optionally control the number
; of line feeds that are issued ...
; Example calls:
; D CENTER^XUXTADPRT1("ANYTEXT") ;.. 1 line feed, center text
; D CENTER^XUXTADPRT1("ANYTEXT",2) ; 2 lines before centered text
; D CENTER^XUXTADPRT1("ANYTEXT",2,IOM,1) ;Display text w/reverse video
;
NEW XUXTADCNTLF ; Count of line feeds
Q:$G(XUXTADTEXT)=""
S XUXTADLF=$G(XUXTADLF,1)
S XUXTADRM=$G(XUXTADRM,IOM)
S XUXTADRVIDEO=$G(XUXTADRVIDEO,0)
I XUXTADLF>0 F XUXTADCNTLF=1:1:XUXTADLF W !
W ?(XUXTADRM-$L(XUXTADTEXT))\2
D:XUXTADRVIDEO REVVIDEO("ON")
W XUXTADTEXT
D:XUXTADRVIDEO REVVIDEO("OFF")
Q ; CENTER
;
CONTINUE(XUXTADLF,XUXTADTYPE) ; Variations of Press <ENTER> to continue.
;
;-- Input:
; XUXTADLF.. ; Optional
; Number of linefeeds before message (defaults to 2)
; XUXTADTYPE ; Optional
; R ; Press <ENTER> to continue:
; Q ; Press <ENTER> to continue, '^' to quit:
;-- Output (can only be set to 1 when XUXTADTYPE="Q"):
; XUXTADQUIT ; 1 if user enters '^'
; 0 if user to continue
;-- Intended use:
; The purpose of this API is to allow the developer to pause output
; to a video display terminal, give the user a chance to view what
; has been previously displayed, and then allowing the user to
; Press <Enter> to continue, or allow them to '^' to terminate the
; display.
;
; Example calls:
; D CONTINUE^XUXTADPRT1(2,"R")
; D CONTINUE^XUXTADPRT1(2,"Q") Q:XUXTADQUIT ; Quit on '^' from user
;
NEW XUXTADCNT,XUXTADREAD,XUXTADDTIME
Q:$E($G(IOST),1,2)'="C-"
S XUXTADLF=$G(XUXTADLF,2) ; Default to two line feeds
S XUXTADDTIME=$S($G(DTIME)>0:DTIME,1:300)
S:$G(XUXTADTYPE)="" XUXTADTYPE="R"
;
F XUXTADCNT=1:1:+$G(XUXTADLF) W !
;
I XUXTADTYPE="R" D Q
. W "Press <ENTER> to continue: "
. R XUXTADREAD:XUXTADDTIME
;
I XUXTADTYPE="Q" D Q
. SET XUXTADQUIT=0 ; Initialize output status flag to successful
. W "Press <ENTER> to continue, '^' to quit: "
. R XUXTADREAD:XUXTADDTIME
. S:'$T XUXTADREAD="^" I XUXTADREAD["^" SET XUXTADQUIT=1 ; User entered '^', quit
Q:XUXTADQUIT
Q ; CONTINUE
;
INITPRT ; Initialize printed report variables
;-- Input:
; IOM ; (right margin) system variable is expected to be defined
;-- Output: - It is *YOUR* responsibility to clean these up after use if not
; New the following to start with fresh print variables.
; XUXTADCNT ; 0 ; Used to count records or transactions
; XUXTADDT ; Report begin date and time in mm/dd/yy hh:mm format
; XUXTADFLAG1 ; 1 ; First time execution flag, initialized to 1
; XUXTADLINED ; A line of dashes ("-") used for formatting reports
; XUXTADLINEE ; A line of equal signs ("=") used for formatting reports
; XUXTADLINEP ; A line of periods (".") used for formatting reports
; XUXTADLINEU ; A line of underscore characters ("_") used for
; formatting reports
; XUXTADPG ; 0 ; Page number variable, initialized to zero
; XUXTADQUIT ; 0 ; Quit flag, initialized to zero
; Example:
; ; Start with fresh print variables.
; D INITPRT^XUXTADPRT1 ; Initialize nine standard report variables.
;
; Count, Page Number, and Quit Flag
SET (XUXTADCNT,XUXTADPG,XUXTADQUIT)=0
;
SET XUXTADDT=$$GXDATE($$FMNOW(),1,0,1) ; mm/dd/yy hh:mm
SET $P(XUXTADLINED,"-",IOM+1)="" ;.............. Line of dashes
SET $P(XUXTADLINEE,"=",IOM+1)="" ;.............. Line of equal signs
SET $P(XUXTADLINEP,".",IOM+1)="" ;.............. Line of periods
SET $P(XUXTADLINEU,"_",IOM+1)="" ;.............. Line of underscores
SET XUXTADFLAG1=1 ;............................. 1st_time_flag
Q ; INITPRT
;
LINEWRAP(XUXTADVALUE) ; Turn line wrapping off or on ; Used for data extraction
;-- Input:
; XUXTADVALUE ; Required ; ON or OFF
; IOM.... ; Required ; Right margin (used when VALUE is ON)
;-- Output:
; No output variables will be returned.
;-- Intended use:
; The purpose of this call is to provide the developer with a
; simple switch for turning line wrap on or off when they are
; writing file capture routines. It does this by setting the right
; margin, variable IOM, to zero and executing the ^%ZOSF("RM") call
; to turn off line wrapping. This will prevent an undesired
; carriage return and line feed. Then you reset the right margin
; to the original IOM variable when you are finished to restore the
; carriage return and line feeding.
; Example call:
; D LINEWRAP^XUXTADPRT1("OFF") ; To avoid line wrap during capture
; ; Write code for data extract here (Example: Import in MS Excel)
; D LINEWRAP^XUXTADPRT1("ON") ;. To reset line wrap after completion
;
NEW X
;
S X=$S(XUXTADVALUE="ON":IOM,1:0) ; 0=Turns wrapping off
X TOLW("RM") ; Turn wrapping off or reset right margin/turn wrap on
Q ; LINEWRAP
;
NODATA(XUXTADLF) ; Use for printouts when no data is in ^TMP global
;-- Input:
; XUXTADLF ; Optional ; Integer value representing the number of
; line feeds to issue.
;-- Output:
; No output variables will be returned.
;-- Intended use:
; This API is typically used when there were no database records
; matching the users input criteria, to let the user know that no
; data was found for their requested criteria.
; Example use:
; I '$D(^TMP("XUXTAD",$J)) D Q ; If no data in ^TMP(global)
; . D PRINTHD ;............... Print report header
; . D NODATA^XUXTADPRT1 ;........ Display "No data found"
;
;-- Input:
; XUXTADLF ; Optional ; Number of line feeds (defaults to 2)
;
S XUXTADLF=$G(XUXTADLF,2)
D CENTER("No data was found for the requested input criteria.",XUXTADLF)
D CONTINUE(2,"R")
Q ; NODATA
;
PAGEBRK(XUXTADRTN,XUXTADPG,XUXTADCHKSL,XUXTADNEWPG) ; Generic page break logic
;-- Input:
; XUXTADRTN ; Required ; Name of calling print routine;usually $T(+0)
; XUXTADPG ; Required ; Represents the page number
; XUXTADCHKSL ; Optional ; 1 will check IOSL for page break
; 0 will ignore the page break check
; XUXTADNEWPG ; Optional ; If 1 forces a page break
;-- Output:
; XUXTADQUIT ; Set to 1 if user enters a '^'.
;-- Intended use:
; * Optionally handle check to see if it time for a page break
; using the XUXTADCHKSL input parameter.
; * Automatically handles incrementing of the XUXTADPG (page number)
; variable. Note: The page number is passed as the second
; parameter and must be passed by reference (see examples below).
; * Optionally force a page break, for example when starting to
; list statistics for a new Division, using the XUXTADNEWPG input
; parameter.
; Assumptions:
; * The calling print routine has a label called PRINTHD, which
; is a subroutine for printing the report headers and any column
; headers that may be needed.
; Example uses:
; 1.; Add the following line before writing a new line
; ; to check for page break and if appropriate print report
; ; headers after form feed and page number increment
; D PAGEBRK^XUXTADPRT1($T(+0),.XUXTADPG) Q:XUXTADQUIT
;
; 2.; Add the following line to force a page break and print the
; ; report header. Use this line at the beginning of printing
; ; your report for producing your first page (with headers).
; D PAGEBRK^XUXTADPRT1($T(+0),.XUXTADPG,0,1) Q:XUXTADQUIT
;
S XUXTADNEWPG=$G(XUXTADNEWPG,0) ;.... Default, does NOT force a page break
S XUXTADCHKSL=$G(XUXTADCHKSL,1) ;.... Default, check for page break
I XUXTADCHKSL,$Y'>(IOSL-5) Q ;.. If it's not time for a page break, quit
;
; Press <ENTER> to continue or '^' to quit
;
I XUXTADPG D CONTINUE(2,"Q") Q:XUXTADQUIT ;. Quit on user '^'
I XUXTADPG!XUXTADNEWPG!($E(IOST)="C") W @IOF ;Issue form feed
S XUXTADPG=XUXTADPG+1 ;...................... Increment page number
;
D @("PRINTHD^"_XUXTADRTN) ; --> Print report header from calling routine <--
Q ; PAGEBRK
;
PROCTIME(XUXTADTIMEBEG,XUXTADTIMEEND) ; Display the amount of processing time for the rpt
;-- Input:
; XUXTADTIMEBEG ; Required ; Begin date & time (internal FM format)
; XUXTADTIMEEND ; Optional ; End date & time (internal FM format)
;-- Output:
; No output variables will be returned.
;-- Intended use:
; To provide the developer with an easy way to display the amount
; of execution time that took place during routine processing, or
; during a FileMan print utility.
; Example calls:
; 1. D PROCTIME^XUXTADPRT1(XUXTADDTBEG) ;Optional XUXTADTIMEEND defaults to $$NOW^XLFDT()
; 2. D PROCTIME^XUXTADPRT1(XUXTADDTBEG,XUXTADDTEND) ;Begin & End date/times passed
; 3. Example for use in a D EN1^DIP1 (FM print utility) call:
; PROCTIME ;
; D PROCTIME^XUXTADPRT1
; Q
; ;Now the EN1^DIP1 portion, a programmer hook at the end
; S DIOEND="D PROCTIME^"_$T(+0)_"("_$$NOW^XLFDT()_")"
; ... the rest of your input variable for EN1^DIP
; D EN1^DIP
; Example output:
; PROCESSING TIME: MINS: 1 XUXTADSECS: 2 (04/23/13 13:42)
;
NEW %,XUXTADDAYS,XUXTADDIFF,XUXTADHRS,XUXTADMINS,XUXTADSECS
NEW %DT,A1,DDH,DTOUT,DUOUT,X,Y
;
S XUXTADTIMEEND=$G(XUXTADTIMEEND,$$FMNOW())
;
; If XUXTADTIMEBEG and/or XUXTADTIMEEND are not valid FM internal dates
; quit without displaying anything
; Else
; Calculate the processing time, store in XUXTADDIFF variable
; using internal FM format.
;
S %DT="ST"
S X=XUXTADTIMEBEG
KILL Y D CNVDT I Y=-1!($P(XUXTADTIMEBEG,".")'?7N) Q
S X=XUXTADTIMEEND
KILL Y D CNVDT I Y=-1!($P(XUXTADTIMEEND,".")'?7N) Q
;
S XUXTADDIFF=$$FMDIFF(XUXTADTIMEEND,XUXTADTIMEBEG,3) ; Returns: DD HH:MM:SS
;
; Convert processing time to external format and display results
;
S XUXTADDAYS=$P(XUXTADDIFF," ")
S XUXTADHRS=$P($P(XUXTADDIFF," ",2),":")
S XUXTADMINS=$P($P(XUXTADDIFF," ",2),":",2)
S XUXTADSECS=$P($P(XUXTADDIFF," ",2),":",3)
S:XUXTADSECS="" XUXTADSECS=1
W !!," PROCESSING TIME:"
W:XUXTADDAYS " DAYS: ",XUXTADDAYS
W:XUXTADHRS " HOURS: ",XUXTADHRS
W:XUXTADMINS " MINS: ",XUXTADMINS
W:XUXTADSECS " SECS: ",XUXTADSECS
;
W " (",$$GXDATE($$FMNOW(),1),")" ; Display end time
Q ; PROCTIME
;
REVVIDEO(XUXTADVALUE) ; Turn REVERSE VIDEO on or off depending upon ENVALUE
;-- Input:
; VALUE ; Required ; Should be a value of 'ON' or 'OFF'
; IOST(0) ; Required ; IEN of the current device terminal type
;-- Output:
; No output variables will be returned.
; Example calls:
; D REVVIDEO^XUXTADPRT1("ON")
; ; Write 'text' and/or variable(s) here
; D REVVIDEO^XUXTADPRT1("OFF")
;
NEW DIERR,XUXTADIENS,XUXTADQUIT,XUXTADTT,XUXTADRVDOFF,XUXTADRVDON
;
S XUXTADIENS=+$G(IOST(0))_"," Q:$P(XUXTADIENS,",")'>0
D GETS(3.2,XUXTADIENS,"14;15","E","XUXTADTT")
D DIERR(60,5,"XUXTADERROR","REVVIDEO^"_$T(+0)) Q:XUXTADQUIT
S XUXTADRVDON=XUXTADTT(3.2,XUXTADIENS,14,"E")
S XUXTADRVDOFF=XUXTADTT(3.2,XUXTADIENS,15,"E")
;
I XUXTADVALUE="ON",XUXTADRVDON]"" W @(XUXTADRVDON) Q
I XUXTADVALUE="OFF",XUXTADRVDOFF]"" W @(XUXTADRVDOFF) Q
Q ; REVVIDEO
;
;XUXTADPRT1 ;ESL/JAC/cm - UTL Printing subroutines & extrinsics #1 ; 06/26/2020 09:30
--- Routine Detail --- with STRUCTURED ROUTINE LISTING ---[H[J[2J[HXUXTADPRT1 13256 printed Jan 29, 2026@15:13:05 Page 2
XUXTADPRT1 ;ESL/JAC/CM - UTL Printing subroutines & extrinsics #1 ; 06/26/2020@9:30
+1 ;;8.0;KERNEL;**807**;Oct 16, 2024;Build 56;
+2 ;
+3 ;
+4 ; External API'S
+5 ;
+6 ; XUXTAD API's
GXDATE(AXUXTADDATE,AXUXTADTIME,AXUXTADSECS,AXUXTADFORMAT) QUIT $$DATE^XUXTADDT1($GET(AXUXTADDATE),$GET(AXUXTADTIME),$GET(AXUXTADSECS),$GET(AXUXTADFORMAT))
DIERR(AXUXTADWIDTH,AXUXTADLFTMAR,AXUXTADMSGROOT,AXUXTADFRMRTN,AXUXTADNOPAUSE) DO DIERR^XUXTADDILG($GET(AXUXTADWIDTH),$GET(AXUXTADLFTMAR),$GET(AXUXTADMSGROOT),$GET(AXUXTADFRMRTN),$GET(AXUXTADNOPAUSE))
QUIT
+1 ; Helper Functions/API's
FMDATE() QUIT $$DT^XLFDT
FMNOW() QUIT $$NOW^XLFDT
CNVDT DO ^%DT
QUIT
TOLW(AP) XECUTE ^%ZOSF($GET(AP))
FMDIFF(ATIMEEND,ATIMEBEG,ADS) QUIT $$FMDIFF^XLFDT($GET(ATIMEEND),$GET(ATIMEBEG),$GET(ADS))
GETS(ADIQGR,ADA,ADR,ADIQGPARM,ADIQGTA,ADIQGERRA,ADIQGIPAR) DO GETS^DIQ($GET(ADIQGR),$GET(ADA),$GET(ADR),$GET(ADIQGPARM),$GET(ADIQGTA),$GET(ADIQGERRA),$GET(ADIQGIPAR))
QUIT
+1 ;
+2 ;-- Integration Control Registrations
+3 ; Reference to ^%DT in ICR #10003
+4 ; Reference to GETS^DIQ in ICR #2056
+5 ; Reference to ^%ZOSF("RM" in ICR #10096 All nodes exported by Kernel are useable.
+6 ; Reference to $$FMDIFF^XLFDT in ICR #10103
+7 ; Reference to $$NOW^XLFDT in ICR #10103
+8 ;
CENTER(XUXTADTEXT,XUXTADLF,XUXTADRM,XUXTADRVIDEO) ;
+1 ; Line feed, then write heading (or any text) centered. Optionally
+2 ; display the text in reverse video.
+3 ;
+4 ;-- Input:
+5 ; XUXTADTEXT.. ; Required ; Text to be centered
+6 ; XUXTADLF.... ; Optional ; Number of line feeds issued before writing
+7 ; the centered text (defaults to 1)
+8 ; XUXTADRM.....; Right Margin (defaults to IOM)
+9 ; XUXTADRVIDEO ; 0 for normal display (default is 0)
+10 ; 1 to display text in reverse video
+11 ;-- Output:
+12 ; No output variables will be returned.
+13 ;-- Intended use:
+14 ; This API call allows the developer to center text messages
+15 ; displayed to the user. You can optionally control the number
+16 ; of line feeds that are issued ...
+17 ; Example calls:
+18 ; D CENTER^XUXTADPRT1("ANYTEXT") ;.. 1 line feed, center text
+19 ; D CENTER^XUXTADPRT1("ANYTEXT",2) ; 2 lines before centered text
+20 ; D CENTER^XUXTADPRT1("ANYTEXT",2,IOM,1) ;Display text w/reverse video
+21 ;
+22 ; Count of line feeds
NEW XUXTADCNTLF
+23 if $GET(XUXTADTEXT)=""
QUIT
+24 SET XUXTADLF=$GET(XUXTADLF,1)
+25 SET XUXTADRM=$GET(XUXTADRM,IOM)
+26 SET XUXTADRVIDEO=$GET(XUXTADRVIDEO,0)
+27 IF XUXTADLF>0
FOR XUXTADCNTLF=1:1:XUXTADLF
WRITE !
+28 WRITE ?(XUXTADRM-$LENGTH(XUXTADTEXT))\2
+29 if XUXTADRVIDEO
DO REVVIDEO("ON")
+30 WRITE XUXTADTEXT
+31 if XUXTADRVIDEO
DO REVVIDEO("OFF")
+32 ; CENTER
QUIT
+33 ;
CONTINUE(XUXTADLF,XUXTADTYPE) ; Variations of Press <ENTER> to continue.
+1 ;
+2 ;-- Input:
+3 ; XUXTADLF.. ; Optional
+4 ; Number of linefeeds before message (defaults to 2)
+5 ; XUXTADTYPE ; Optional
+6 ; R ; Press <ENTER> to continue:
+7 ; Q ; Press <ENTER> to continue, '^' to quit:
+8 ;-- Output (can only be set to 1 when XUXTADTYPE="Q"):
+9 ; XUXTADQUIT ; 1 if user enters '^'
+10 ; 0 if user to continue
+11 ;-- Intended use:
+12 ; The purpose of this API is to allow the developer to pause output
+13 ; to a video display terminal, give the user a chance to view what
+14 ; has been previously displayed, and then allowing the user to
+15 ; Press <Enter> to continue, or allow them to '^' to terminate the
+16 ; display.
+17 ;
+18 ; Example calls:
+19 ; D CONTINUE^XUXTADPRT1(2,"R")
+20 ; D CONTINUE^XUXTADPRT1(2,"Q") Q:XUXTADQUIT ; Quit on '^' from user
+21 ;
+22 NEW XUXTADCNT,XUXTADREAD,XUXTADDTIME
+23 if $EXTRACT($GET(IOST),1,2)'="C-"
QUIT
+24 ; Default to two line feeds
SET XUXTADLF=$GET(XUXTADLF,2)
+25 SET XUXTADDTIME=$SELECT($GET(DTIME)>0:DTIME,1:300)
+26 if $GET(XUXTADTYPE)=""
SET XUXTADTYPE="R"
+27 ;
+28 FOR XUXTADCNT=1:1:+$GET(XUXTADLF)
WRITE !
+29 ;
+30 IF XUXTADTYPE="R"
Begin DoDot:1
+31 WRITE "Press <ENTER> to continue: "
+32 READ XUXTADREAD:XUXTADDTIME
End DoDot:1
QUIT
+33 ;
+34 IF XUXTADTYPE="Q"
Begin DoDot:1
+35 ; Initialize output status flag to successful
SET XUXTADQUIT=0
+36 WRITE "Press <ENTER> to continue, '^' to quit: "
+37 READ XUXTADREAD:XUXTADDTIME
+38 ; User entered '^', quit
if '$TEST
SET XUXTADREAD="^"
IF XUXTADREAD["^"
SET XUXTADQUIT=1
End DoDot:1
QUIT
+39 if XUXTADQUIT
QUIT
+40 ; CONTINUE
QUIT
+41 ;
INITPRT ; Initialize printed report variables
+1 ;-- Input:
+2 ; IOM ; (right margin) system variable is expected to be defined
+3 ;-- Output: - It is *YOUR* responsibility to clean these up after use if not
+4 ; New the following to start with fresh print variables.
+5 ; XUXTADCNT ; 0 ; Used to count records or transactions
+6 ; XUXTADDT ; Report begin date and time in mm/dd/yy hh:mm format
+7 ; XUXTADFLAG1 ; 1 ; First time execution flag, initialized to 1
+8 ; XUXTADLINED ; A line of dashes ("-") used for formatting reports
+9 ; XUXTADLINEE ; A line of equal signs ("=") used for formatting reports
+10 ; XUXTADLINEP ; A line of periods (".") used for formatting reports
+11 ; XUXTADLINEU ; A line of underscore characters ("_") used for
+12 ; formatting reports
+13 ; XUXTADPG ; 0 ; Page number variable, initialized to zero
+14 ; XUXTADQUIT ; 0 ; Quit flag, initialized to zero
+15 ; Example:
+16 ; ; Start with fresh print variables.
+17 ; D INITPRT^XUXTADPRT1 ; Initialize nine standard report variables.
+18 ;
+19 ; Count, Page Number, and Quit Flag
+20 SET (XUXTADCNT,XUXTADPG,XUXTADQUIT)=0
+21 ;
+22 ; mm/dd/yy hh:mm
SET XUXTADDT=$$GXDATE($$FMNOW(),1,0,1)
+23 ;.............. Line of dashes
SET $PIECE(XUXTADLINED,"-",IOM+1)=""
+24 ;.............. Line of equal signs
SET $PIECE(XUXTADLINEE,"=",IOM+1)=""
+25 ;.............. Line of periods
SET $PIECE(XUXTADLINEP,".",IOM+1)=""
+26 ;.............. Line of underscores
SET $PIECE(XUXTADLINEU,"_",IOM+1)=""
+27 ;............................. 1st_time_flag
SET XUXTADFLAG1=1
+28 ; INITPRT
QUIT
+29 ;
LINEWRAP(XUXTADVALUE) ; Turn line wrapping off or on ; Used for data extraction
+1 ;-- Input:
+2 ; XUXTADVALUE ; Required ; ON or OFF
+3 ; IOM.... ; Required ; Right margin (used when VALUE is ON)
+4 ;-- Output:
+5 ; No output variables will be returned.
+6 ;-- Intended use:
+7 ; The purpose of this call is to provide the developer with a
+8 ; simple switch for turning line wrap on or off when they are
+9 ; writing file capture routines. It does this by setting the right
+10 ; margin, variable IOM, to zero and executing the ^%ZOSF("RM") call
+11 ; to turn off line wrapping. This will prevent an undesired
+12 ; carriage return and line feed. Then you reset the right margin
+13 ; to the original IOM variable when you are finished to restore the
+14 ; carriage return and line feeding.
+15 ; Example call:
+16 ; D LINEWRAP^XUXTADPRT1("OFF") ; To avoid line wrap during capture
+17 ; ; Write code for data extract here (Example: Import in MS Excel)
+18 ; D LINEWRAP^XUXTADPRT1("ON") ;. To reset line wrap after completion
+19 ;
+20 NEW X
+21 ;
+22 ; 0=Turns wrapping off
SET X=$SELECT(XUXTADVALUE="ON":IOM,1:0)
+23 ; Turn wrapping off or reset right margin/turn wrap on
XECUTE TOLW("RM")
+24 ; LINEWRAP
QUIT
+25 ;
NODATA(XUXTADLF) ; Use for printouts when no data is in ^TMP global
+1 ;-- Input:
+2 ; XUXTADLF ; Optional ; Integer value representing the number of
+3 ; line feeds to issue.
+4 ;-- Output:
+5 ; No output variables will be returned.
+6 ;-- Intended use:
+7 ; This API is typically used when there were no database records
+8 ; matching the users input criteria, to let the user know that no
+9 ; data was found for their requested criteria.
+10 ; Example use:
+11 ; I '$D(^TMP("XUXTAD",$J)) D Q ; If no data in ^TMP(global)
+12 ; . D PRINTHD ;............... Print report header
+13 ; . D NODATA^XUXTADPRT1 ;........ Display "No data found"
+14 ;
+15 ;-- Input:
+16 ; XUXTADLF ; Optional ; Number of line feeds (defaults to 2)
+17 ;
+18 SET XUXTADLF=$GET(XUXTADLF,2)
+19 DO CENTER("No data was found for the requested input criteria.",XUXTADLF)
+20 DO CONTINUE(2,"R")
+21 ; NODATA
QUIT
+22 ;
PAGEBRK(XUXTADRTN,XUXTADPG,XUXTADCHKSL,XUXTADNEWPG) ; Generic page break logic
+1 ;-- Input:
+2 ; XUXTADRTN ; Required ; Name of calling print routine;usually $T(+0)
+3 ; XUXTADPG ; Required ; Represents the page number
+4 ; XUXTADCHKSL ; Optional ; 1 will check IOSL for page break
+5 ; 0 will ignore the page break check
+6 ; XUXTADNEWPG ; Optional ; If 1 forces a page break
+7 ;-- Output:
+8 ; XUXTADQUIT ; Set to 1 if user enters a '^'.
+9 ;-- Intended use:
+10 ; * Optionally handle check to see if it time for a page break
+11 ; using the XUXTADCHKSL input parameter.
+12 ; * Automatically handles incrementing of the XUXTADPG (page number)
+13 ; variable. Note: The page number is passed as the second
+14 ; parameter and must be passed by reference (see examples below).
+15 ; * Optionally force a page break, for example when starting to
+16 ; list statistics for a new Division, using the XUXTADNEWPG input
+17 ; parameter.
+18 ; Assumptions:
+19 ; * The calling print routine has a label called PRINTHD, which
+20 ; is a subroutine for printing the report headers and any column
+21 ; headers that may be needed.
+22 ; Example uses:
+23 ; 1.; Add the following line before writing a new line
+24 ; ; to check for page break and if appropriate print report
+25 ; ; headers after form feed and page number increment
+26 ; D PAGEBRK^XUXTADPRT1($T(+0),.XUXTADPG) Q:XUXTADQUIT
+27 ;
+28 ; 2.; Add the following line to force a page break and print the
+29 ; ; report header. Use this line at the beginning of printing
+30 ; ; your report for producing your first page (with headers).
+31 ; D PAGEBRK^XUXTADPRT1($T(+0),.XUXTADPG,0,1) Q:XUXTADQUIT
+32 ;
+33 ;.... Default, does NOT force a page break
SET XUXTADNEWPG=$GET(XUXTADNEWPG,0)
+34 ;.... Default, check for page break
SET XUXTADCHKSL=$GET(XUXTADCHKSL,1)
+35 ;.. If it's not time for a page break, quit
IF XUXTADCHKSL
IF $Y'>(IOSL-5)
QUIT
+36 ;
+37 ; Press <ENTER> to continue or '^' to quit
+38 ;
+39 ;. Quit on user '^'
IF XUXTADPG
DO CONTINUE(2,"Q")
if XUXTADQUIT
QUIT
+40 ;Issue form feed
IF XUXTADPG!XUXTADNEWPG!($EXTRACT(IOST)="C")
WRITE @IOF
+41 ;...................... Increment page number
SET XUXTADPG=XUXTADPG+1
+42 ;
+43 ; --> Print report header from calling routine <--
DO @("PRINTHD^"_XUXTADRTN)
+44 ; PAGEBRK
QUIT
+45 ;
PROCTIME(XUXTADTIMEBEG,XUXTADTIMEEND) ; Display the amount of processing time for the rpt
+1 ;-- Input:
+2 ; XUXTADTIMEBEG ; Required ; Begin date & time (internal FM format)
+3 ; XUXTADTIMEEND ; Optional ; End date & time (internal FM format)
+4 ;-- Output:
+5 ; No output variables will be returned.
+6 ;-- Intended use:
+7 ; To provide the developer with an easy way to display the amount
+8 ; of execution time that took place during routine processing, or
+9 ; during a FileMan print utility.
+10 ; Example calls:
+11 ; 1. D PROCTIME^XUXTADPRT1(XUXTADDTBEG) ;Optional XUXTADTIMEEND defaults to $$NOW^XLFDT()
+12 ; 2. D PROCTIME^XUXTADPRT1(XUXTADDTBEG,XUXTADDTEND) ;Begin & End date/times passed
+13 ; 3. Example for use in a D EN1^DIP1 (FM print utility) call:
+14 ; PROCTIME ;
+15 ; D PROCTIME^XUXTADPRT1
+16 ; Q
+17 ; ;Now the EN1^DIP1 portion, a programmer hook at the end
+18 ; S DIOEND="D PROCTIME^"_$T(+0)_"("_$$NOW^XLFDT()_")"
+19 ; ... the rest of your input variable for EN1^DIP
+20 ; D EN1^DIP
+21 ; Example output:
+22 ; PROCESSING TIME: MINS: 1 XUXTADSECS: 2 (04/23/13 13:42)
+23 ;
+24 NEW %,XUXTADDAYS,XUXTADDIFF,XUXTADHRS,XUXTADMINS,XUXTADSECS
+25 NEW %DT,A1,DDH,DTOUT,DUOUT,X,Y
+26 ;
+27 SET XUXTADTIMEEND=$GET(XUXTADTIMEEND,$$FMNOW())
+28 ;
+29 ; If XUXTADTIMEBEG and/or XUXTADTIMEEND are not valid FM internal dates
+30 ; quit without displaying anything
+31 ; Else
+32 ; Calculate the processing time, store in XUXTADDIFF variable
+33 ; using internal FM format.
+34 ;
+35 SET %DT="ST"
+36 SET X=XUXTADTIMEBEG
+37 KILL Y
DO CNVDT
IF Y=-1!($PIECE(XUXTADTIMEBEG,".")'?7N)
QUIT
+38 SET X=XUXTADTIMEEND
+39 KILL Y
DO CNVDT
IF Y=-1!($PIECE(XUXTADTIMEEND,".")'?7N)
QUIT
+40 ;
+41 ; Returns: DD HH:MM:SS
SET XUXTADDIFF=$$FMDIFF(XUXTADTIMEEND,XUXTADTIMEBEG,3)
+42 ;
+43 ; Convert processing time to external format and display results
+44 ;
+45 SET XUXTADDAYS=$PIECE(XUXTADDIFF," ")
+46 SET XUXTADHRS=$PIECE($PIECE(XUXTADDIFF," ",2),":")
+47 SET XUXTADMINS=$PIECE($PIECE(XUXTADDIFF," ",2),":",2)
+48 SET XUXTADSECS=$PIECE($PIECE(XUXTADDIFF," ",2),":",3)
+49 if XUXTADSECS=""
SET XUXTADSECS=1
+50 WRITE !!," PROCESSING TIME:"
+51 if XUXTADDAYS
WRITE " DAYS: ",XUXTADDAYS
+52 if XUXTADHRS
WRITE " HOURS: ",XUXTADHRS
+53 if XUXTADMINS
WRITE " MINS: ",XUXTADMINS
+54 if XUXTADSECS
WRITE " SECS: ",XUXTADSECS
+55 ;
+56 ; Display end time
WRITE " (",$$GXDATE($$FMNOW(),1),")"
+57 ; PROCTIME
QUIT
+58 ;
REVVIDEO(XUXTADVALUE) ; Turn REVERSE VIDEO on or off depending upon ENVALUE
+1 ;-- Input:
+2 ; VALUE ; Required ; Should be a value of 'ON' or 'OFF'
+3 ; IOST(0) ; Required ; IEN of the current device terminal type
+4 ;-- Output:
+5 ; No output variables will be returned.
+6 ; Example calls:
+7 ; D REVVIDEO^XUXTADPRT1("ON")
+8 ; ; Write 'text' and/or variable(s) here
+9 ; D REVVIDEO^XUXTADPRT1("OFF")
+10 ;
+11 NEW DIERR,XUXTADIENS,XUXTADQUIT,XUXTADTT,XUXTADRVDOFF,XUXTADRVDON
+12 ;
+13 SET XUXTADIENS=+$GET(IOST(0))_","
if $PIECE(XUXTADIENS,",")'>0
QUIT
+14 DO GETS(3.2,XUXTADIENS,"14;15","E","XUXTADTT")
+15 DO DIERR(60,5,"XUXTADERROR","REVVIDEO^"_$TEXT(+0))
if XUXTADQUIT
QUIT
+16 SET XUXTADRVDON=XUXTADTT(3.2,XUXTADIENS,14,"E")
+17 SET XUXTADRVDOFF=XUXTADTT(3.2,XUXTADIENS,15,"E")
+18 ;
+19 IF XUXTADVALUE="ON"
IF XUXTADRVDON]""
WRITE @(XUXTADRVDON)
QUIT
+20 IF XUXTADVALUE="OFF"
IF XUXTADRVDOFF]""
WRITE @(XUXTADRVDOFF)
QUIT
+21 ; REVVIDEO
QUIT
+22 ;
+23 ;XUXTADPRT1 ;ESL/JAC/cm - UTL Printing subroutines & extrinsics #1 ; 06/26/2020 09:30
