HEALTH LEVEL SEVEN (33)    PACKAGE (9.4)

Name Value
NAME HEALTH LEVEL SEVEN
PREFIX HL
DEVELOPER (PERSON/SITE) SAW,RJS,MFK,MTC,JRP / ALBANY ISC
*LOWEST FILE NUMBER 770
*HIGHEST FILE NUMBER 870
DEVELOPMENT ISC ALBANY
CLASS National
SHORT DESCRIPTION DHCP IMPLEMENTATION OF HEALTH LEVEL SEVEN
VERSION
  • 1.6
    DATE DISTRIBUTED:   2005-11-19 00:00:00
    PATCH APPLICATION HISTORY:
    • 8 SEQ #6
      DATE APPLIED:   1996-06-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch prevents a NULLSUBSCR error from occuring on inbound batch
      acknowledgments and corrects a problem with the format of the MSA segment.
      
    • 29 SEQ #22
      DATE APPLIED:   1997-06-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch fixes the problems as described in NOIS #BRX-0896-12049.
       
      Routine Summary:
      ================
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
       
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
       
      Checksums:
      The problems come from the "date.time" subscript of the ^TMP("HL",
      ==========
       
        Routine Name     Checksum Before     Checksum After       Patch List
        ------------     ---------------     --------------       ----------
            HLLP            13472823           13466846            1,12,29
       
       From CHECK^XTSUMBLD  
       
       
      Installation Instructions:
      ^TMP("HLR", and ^TMP("HLS", which is not correctly set to comply with
      ==========================
        1.  Users are allowed to be on the system during the installation.
        2.  Stop all the HLLP logical links for v 1.5 interface.  
        3.  AXP SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        5.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
      the FileMan format.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
       
               Verify Checksums in Transport Global
               Print Transport Global 
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*29
                             =========
       
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        6.  MSM Sites - Answer 'YES' to the question 'Want to MOVE routines to
            other CPUs?'. Enter the names of your Compute and Print server(s).
        7.  AXP Sites: Rebuild your mapped set if necessary.
        8.  Restart all the HLLP logical links which have been stopped at step
            2.
       
      Test Sites:
      ===========
       
      
    • 139 SEQ #115
      DATE APPLIED:   2009-07-07 17:14:01
      APPLIED BY:   USER,SEVENTEEN
    • 143 SEQ #116
      DATE APPLIED:   2010-01-14 11:57:36
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      See the National Patch Module on Forum.
      
      
    • 146 SEQ #117
      DATE APPLIED:   2010-01-14 11:57:46
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      See the National Patch Module on Forum for a complete description.
      
      
    • 145 SEQ #118
      DATE APPLIED:   2010-07-22 15:50:05
      APPLIED BY:   USER,SEVENTEEN
    • 148 SEQ #119
      DATE APPLIED:   2010-10-14 17:34:42
      APPLIED BY:   USER,SEVENTEEN
    • 147 SEQ #120
      DATE APPLIED:   2010-11-09 10:16:35
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Please see the National Patch Module on Forum for a complete description.
      
      
    • 151 SEQ #121
      DATE APPLIED:   2010-12-02 09:32:23
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Please see the National Patch Module for the description.
      
      
    • 153 SEQ #122
      DATE APPLIED:   2011-06-29 09:30:01
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Please see the National Patch Module on Forum.
      
      
    • 152 SEQ #123
      DATE APPLIED:   2011-10-06 10:53:07
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Please see the National Patch Module on Forum for a complete description.
      
      
    • 155 SEQ #124
      DATE APPLIED:   2011-11-28 15:29:41
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Please seen the National Patch Module on Forum for a complete description.
      
      
    • 23
      DATE APPLIED:   1997-07-08 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch adds a new entry into the Country Code file (#779.004) to
        1.   Users are allowed to be on the system during the installation.
        2.   Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
             option will load the KIDS package onto your system.  
        3.   The patch has now been loaded into a Transport global on your
             system. You now need to use KIDS to install the Transport global.
             On the KIDS menu, under the 'Installation' menu, use the following
             options:
       
               Verify Checksums in Transport Global
               Print Transport Global 
      solve the problem as describled in NOIS ISF-0297-60099. This new entry
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s)
               INSTALL NAME: HL*1.6*23
                             ==========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
       
        4.   MSM Sites - Answer 'NO' to the question 'Want to MOVE routines to
             other CPUs?'.
      contains a 2-character Country Code, "US" (United States of America), in
      order to conform to the ISO 3166 standard.
       
       
      Installation Instructions:
      ==========================
       
      
    • 157 SEQ #125
      DATE APPLIED:   2012-09-12 16:27:04
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      
      
    • 158 SEQ #126
      DATE APPLIED:   2012-09-19 17:06:40
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      See the National Patch Module on Forum for the patch description.
      
      
    • 161 SEQ #127
      DATE APPLIED:   2013-12-10 16:54:46
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch addresses the following:
       
      -Problems caused while editing active HL Logical Links
      -Problems with "AE" cross reference leading to incorrect setting
       values and inability to delete.
      -Incorrect documentation for HL7 API GENACK^HLMA1 and potential
       <UNDEFINED> error.
      -Extrinsic function NEWEVENT^HLEVAPI could potentially execute
       without returning a value resulting in a <COMMAND> error. 
      
    • 162 SEQ #128
      DATE APPLIED:   2014-07-02 16:49:25
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      To allow for the creation of new links via the Link Edit [HL EDIT LOGICAL 
      LINKS] option, the validation logic will allow users to proceed to the 
      edit screen if the link is new.  Also, it will allow users to proceed if
      the Logical Link is a Multithreaded Listener regardless of the SHUTDOWN 
      LLP? (#14) field value in the HL LOGICAL LINK (#870) file.
      
    • 163 SEQ #129
      DATE APPLIED:   2015-10-27 13:38:19
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      In preparation for the VA's transition from IPv4 to IPv6 the HL7 package 
      will require modifications to make it IPv6 ready.
      
    • 167 SEQ #130
      DATE APPLIED:   2016-08-29 13:09:40
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch modifies the Fileman validation logic to account
      for the upgrade to Fileman V22.2.
      
    • 166 SEQ #131
      DATE APPLIED:   2017-01-23 14:14:32
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch addresses issues when editing HL LOGICAL LINKS, <STORE> errors
      caused by excessive out queue arrays and potential issues with router
      protocols where additional, unwanted data is processed.
      
    • 165 SEQ #132
      DATE APPLIED:   2017-04-03 15:43:58
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Resolve issues with the HL7 receiving process that could lead to the 
      process getting stuck in an endless loop.
      
    • 168 SEQ #133
      DATE APPLIED:   2017-12-27 13:51:40
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Resolves issue with the HL7 process that a bad value for
      HLL("LINKS") would affect subsequent process with HL7
      
    • 169 SEQ #134
      DATE APPLIED:   2018-03-01 15:11:22
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch updates the MPI (Master Patient Index) listener to work on
      Linux and Unix systems.
      
    • 24
      DATE APPLIED:   1997-07-17 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch will do the following to correct the problems found in DD and
            (#771.7).
       
      Test Sites :
      ==============
       
       
      Installation Instructions:
      ==========================
        1.   Patch HL*1.6*26 must be installed before this patch.
        2.   Users are allowed to be on the system during the installation.
      data in files #772 and #771.7:
        3.   Shut down all the outgoing filers.
        4.   Shut down all the incoming filers.
        5.   No routine mapping for this patch.
        6.   Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. 
             This option will load the KIDS package onto your system.  
        7.   The patch has now been loaded into a Transport global on your
             system.  You now need to use KIDS to install the Transport global.
             On the KIDS menu, under the 'Installation' menu, use the following
             options:
       
        1.  Rewrite the KILL logic for the 'AXMITOUT1' cross-reference of
               Verify Checksums in Transport Global
               Print Transport Global 
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*24
                             ==========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        8.   MSM Sites - Answer 'NO' to the question 'Want to MOVE routines
            'Logical Link' field (#772,11) in the HL7 Message Text file (#772).
                to other CPUs?'.
        9.   Restart all the outgoing and incoming filers which have been shut
             down at step 2 and 3.
       10.   You may delete the post-install routine 'HLPAT24' after you have
             successfully installed this patch.
        2.  Rewrite the KILL logic for the 'AXMITOUT2' cross-reference of
            'Status' field (#772,20) in the HL7 Message Text file (#772).
        3.  Modify DD of 'Error Type' field (#772,23) in the HL7 Message Text
            file (#772).
        4.  Modify data of the entry, CODE=1, in the HL7 Error Message file
      
    • 171 SEQ #135
      DATE APPLIED:   2019-07-08 18:02:24
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
       This patch will address 1 issue:
       
       1. When several HL7 event driver protocols share the same sending
          application, message type, event type, and version ID, the HL7 
          software will only retrieve the first protocol, even if it is not the
          correct protocol for the current message being processed.
      
    • 172 SEQ #136
      DATE APPLIED:   2020-09-23 15:46:14
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      This patch updates the Health Level Seven (HL7) routines with a version 
      check that does not include "IRIS".
      
    • 173 SEQ #137
      DATE APPLIED:   2021-10-14 16:00:55
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Health Level Seven (HL7) patch HL*1.6*173 modifies the software to
      ensure the most recently run HL7 monitor is used when checking against
      the REQUEUE MIN-MONITOR (#4) field in the HL7 MONITOR (#776.1) file.
      
    • 174 SEQ #138
      DATE APPLIED:   2022-06-28 15:46:17
      APPLIED BY:   USER,EIGHTYSIX
      DESCRIPTION:   
      Patch HL*1.6*174 addresses 2 issues
      1. An undefined DUZ(2) error in the XPAR1 routine due to the DUZ() array 
         not being set up properly.
      2. An undefined HLNK error in the HLTPCK1A routine due to the domain
         of the sending site not being found in the DOMAIN(4.2) file "B" cross
         reference.
      
    • 175 SEQ #139
      DATE APPLIED:   2023-03-13 15:31:12
      APPLIED BY:   USER,EIGHTYNINE
      DESCRIPTION:   
      MAKE ALL HL FILERS PERSISTENT
      
    • 33 SEQ #26
      DATE APPLIED:   1997-08-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch provides two new features, "Don't Purge" and "Reprocessing"
         
        1.  Users are allowed to be on the system during the installation.
        2.  Check and make sure that the 'HL PURGE TRANSMISSIONS' option is not
            scheduled during the time of installation.
        3.  Stop all the incoming filers.  
        4.  AXP SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
        5.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        6.  The patch has now been loaded into a Transport global on your
        2.  Clear the flag field "DON'T PURGE" (#772,15) to allow the message
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
         
               Verify Checksums in Transport Global
               Print Transport Global 
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*33
            to be purged by the "HL PURGE TRANSMISSIONS" option. Either of the
                             =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        7.  MSM Sites - Answer 'YES' to the question 'Want to MOVE routines to
            other CPUs?'. Enter the names of your Compute and Print server(s).
        8.  AXP Sites: Rebuild your mapped set if necessary.
        9.  Restart all the incoming filers, which have been stopped in step #3.
       10.  Re-schedule 'HL PURGE TRANSMISSIONS' option if this option was
            scheduled and has been stopped in step #2. 
            following two extrinsic functions may be used for this purpose:
                     $$TOPURG^HLCIRN or $$SETPURG^HLCIRN(0)
       
        3.  Reprocessing the message by calling the extrinsic function:
                        $$REPROC^HLCIRN(IEN,RTN)
              where:  IEN is the child message IEN (or the parent message IEN).
                      RTN is the routine to be Xecuted for reprocessing the
      messages, which were requested by the CIRN project.  The new extrinsic
                      message.
       
       
      These extrinsic functions and their associated parameters, return values,
      and results are described as follows:
       
        $$DONTPURG^HLCIRN():
           purpose:       to set the "DON'T PURGE" field (#772,15).
           input:         none
           return value:  1   means field has been successfully set
      function calls allow the VISTA/DHCP applications to interface with HL7
                          -1  means call has failed; nothing has been changed
        
        $$TOPURG^HLCIRN():
           purpose:       to clear the "DON'T PURGE" field (#772,15).
           input:         none
           return value:  0   means field has been successfully cleared
                          -1  means call has failed; nothing has been changed
       
        $$SETPURG^HLCIRN(STATUS):
           purpose:       either to set (STATUS=1) or to clear (STATUS=0) the
      in the following ways:
                          "DON'T PURGE" field (#772,15).
           input:         STATUS=1  used to set the "DON'T PURGE" field.
                          STATUS=0  used to clear the "DON'T PURGE" field.
           return value:  1   means field has been successfully set
                          0   means field has been successfully cleared
                          -1  means call has failed; nothing has been changed
        
        $$REPROC^HLCIRN(IEN,RTN):
           purpose:       to reprocess message.
           input:         IEN= the child message IEN (or the parent message
       
                               IEN) of file #772.
                          RTN= routine, to be Xecuted for reprocessing the
                               message.
           return value:  0  means call has been successfully completed
                          -1 means call has failed; nothing has been changed
       
      The extrinsic functions, $$DONTPURG^HLCIRN(), $$TOPURG^HLCIRN(), and
      $$SETPURG^HLCIRN(STATUS) should be called by one of the following
      routines:
          - RTN routine, which is provided to $$REPROC^HLCIRN(IEN,RTN).
        1.  Set the new flag field "DON'T PURGE" (#772,15) to prevent a message
          - routine stored in field "GENERATE/PROCESS ROUTINE"(#101,771).
          - routine stored in field "GENERATE/PROCESS ACK ROUTINE"(#101,772). 
       
      When called by these routines, HL7 assumes that the variables,
      HLMTIENS(child message IEN of file #772) and HLMTIEN(parent message IEN of
      file #772), are already properly defined.  Otherwise, if they are called
      elsewhere, at least the HLMTIEN should be defined in order to make them to
      work.  If only HLMTIEN is defined, then the call will only update the
      entry of parent message. Of course, having only a defined HLMTIENS is
      enough for HL7 to find the corresponding value for HLMTIEN, and
            being purged by the "HL PURGE TRANSMISSIONS" option.  Either of the
      consequently HL7 will update entries for both child and parent massages.
       
      The IEN, which is provided to $$REPROC^HLCIRN(IEN,RTN) should be the child
      message IEN of file #772.  This will make HL7 update the "STATUS" for both
      child and parent message entries.  If the IEN is the parent message IEN,
      then only the "STATUS" of the parent message entry will be updated.
       
       
      Routine Summary:
      ================
            following two extrinsic functions may be used for this purpose:
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
         
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
         
         
      Checksums:
      ==========
         
          Routine Name     Checksum Before     Checksum After       Patch List
                     $$DONTPURG^HLCIRN or $$SETPURG^HLCIRN(1)
          ------------     ---------------     --------------      ------------
            HLCIRN               N/A              4336697               33
            HLTPCK1            4288888            4143076               8,33
            HLUOPT1            9958836            9990663           10,13,21,33
       
         From CHECK^XTSUMBLD  
         
         
      Installation Instructions:
      ==========================
      
    • 35 SEQ #27
      DATE APPLIED:   1998-05-11 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch contains changes to the Mailman LLP to further improve
      performance and IO issues and ensure the process dies off after a shutdown
      request.
      
    • 36 SEQ #28
      DATE APPLIED:   1998-06-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch provides two new features, "Don't Purge" and "Reprocessing"
       
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
         
               Verify Checksums in Transport Global
               Print Transport Global 
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*36
       2.  Clear the flag field "DON'T PURGE" (#772,15) to allow the message
                             =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        7.  DSM Sites: Rebuild your mapped set if necessary.
        8.  Restart all the incoming filers, which have been stopped in step #3.
        9.  Re-schedule 'HL PURGE TRANSMISSIONS' option if this option was
            scheduled and has been stopped in step #2. 
            to be purged by the "HL PURGE TRANSMISSIONS" option. The following
            extrinsic function may be used for this purpose:
                     $$TOPURG^HLUTIL()
       
        3.  Reprocessing the message by calling the extrinsic function:
                        $$REPROC^HLUTIL(IEN,RTN)
              where:  IEN is the child message IEN (or the parent message IEN).
                      RTN is the routine to be Xecuted for reprocessing the
      messages, which were originally requested by the CIRN project.  The new
                      message.
       
       
       These extrinsic functions and their associated parameters, return values,
       and results are described as follows:
       
        $$DONTPURG^HLUTIL():
           purpose:       to set the "DON'T PURGE" field (#772,15).
           input:         none
           return value:  1   means field has been successfully set
      extrinsic function calls allow the VISTA/DHCP applications to interface
                          -1  means call has failed; nothing has been changed
       
        $$TOPURG^HLUTIL():
           purpose:       to clear the "DON'T PURGE" field (#772,15).
           input:         none
           return value:  0   means field has been successfully cleared
                          -1  means call has failed; nothing has been changed
       
        $$REPROC^HLUTIL(IEN,RTN):
           purpose:       to reprocess message.
      with HL7 in the following ways:
           input:         IEN= the child message IEN (or the parent message
                               IEN) of file #772.
                          RTN= routine, to be Xecuted for reprocessing the
                               message.
           return value:  0  means call has been successfully completed
                          -1 means call has failed; nothing has been changed
       
      The extrinsic functions, $$DONTPURG^HLUTIL(), $$TOPURG^HLUTIL(), should be
      called by one of the following routines:
          - RTN routine, which is provided to $$REPROC^HLUTIL(IEN,RTN).
       
          - routine stored in field "GENERATE/PROCESS ROUTINE"(#101,771).
          - routine stored in field "GENERATE/PROCESS ACK ROUTINE"(#101,772). 
       
      When called by these routines, HL7 assumes that the variables,
      HLMTIENS(child message IEN of file #772) and HLMTIEN(parent message IEN of
      file #772), are already properly defined.  Otherwise, if they are called
      elsewhere, at least the HLMTIEN should be defined in order to make them to
      work.  If only HLMTIEN is defined, then the call will only update the
      entry of parent message. Of course, having only a defined HLMTIENS is
      enough for HL7 to find the corresponding value for HLMTIEN, and
        1.  Set the new flag field "DON'T PURGE" (#772,15) to prevent a message
      consequently HL7 will update entries for both child and parent massages.
       
      The IEN, which is provided to $$REPROC^HLUTIL(IEN,RTN) should be the child
      message IEN of file #772.  This will make HL7 update the "STATUS" for both
      child and parent message entries.  If the IEN is the parent message IEN,
      then only the "STATUS" of the parent message entry will be updated.
       
       
      Routine Summary:
      ================
            being purged by the "HL PURGE TRANSMISSIONS" option.  The following
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
       
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
       
      Checksums:
      ==========
       
          Routine Name     Checksum Before     Checksum After       Patch List
            extrinsic function may be used for this purpose:
          ------------     ---------------     --------------       -----------
            HLUTIL               N/A               4603738              36
            HLTPCK1            4288888             4288888             8,36
            HLUOPT1            9958836             9990663          10,13,21,36
       
       From CHECK^XTSUMBLD
       
       
      Installation Instructions:
      ==========================
                     $$DONTPURG^HLUTIL()
        1.  Users are allowed to be on the system during the installation.
        2.  Check and make sure that the 'HL PURGE TRANSMISSIONS' option is not
            scheduled during the time of installation.
        3.  Stop all the incoming filers.
        4.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
        5.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        6.  The patch has now been loaded into a Transport global on your
      
    • 38 SEQ #29
      DATE APPLIED:   1998-06-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch solves the following problems:
      $$OLDM10^HLFNC(X,HLECDE) and $$OLDM11^HLFNC(X,HLECDE).
       
      Routine Summary:
      ================
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
         
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
         
         
        NOIS ISF-1097-61155: The M10 and M11 check digit algorithms do not
      Checksums:
      ==========
         
          Routine Name     Checksum Before     Checksum After       Patch List
          ------------     ---------------     --------------      ------------
            HLFNC              5564618             6477455             38
       
          From CHECK^XTSUMBLD 
       
         
                             comply with the HL7 Standard.
      Installation Instructions:
      ==========================
        1.  Users are allowed to be on the system during the installation.
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
        3.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        4.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
       
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
         
               Verify Checksums in Transport Global
               Print Transport Global 
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*38
                             =========
      The two extrinsic functions, $$M10^HLFNC(X,HLECDE) and
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        5.  DSM Sites: Rebuild your mapped set if necessary.
      $$M11^HLFNC(X,HLECDE) are calls for the new and HL7 Standardized
      algorithms for M10 and M11, respectively.
        
      However, old and non-Standard algorithms calls has been moved to calls,
      
    • 34 SEQ #30
      DATE APPLIED:   1998-06-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch solves the following problems:
        6.  Corrects a problem with messages that are dynamically addressed over
            mailman-type logical link (see patch 14 documentation). The system
            link monitor was not updated correctly.
       
      PLEASE SEE THE PATCH MODULE FOR DETAILS. 
        1.  IND-0797-40843: A corrupted message with message ID missing crashed
                            the HL7 incoming filer.
        2.  SLC-0897-50592: eliminates priority setting in HLLP processes.
        3.  STX-0897-70964: An unexpected message block sequence, issued by the
                            VIC machine, blew out the HL7 LLP process.
        4.  IND-0198-40985: system monitor/process priority.
        5.  Fixes the problem with undefined application name in fields (MSH;3)
                            and/or (MSH;5).
      
    • 41 SEQ #31
      DATE APPLIED:   1998-06-18 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      PATCH FOR PATCH 34. Missing routine HLUTIL3.
      
    • 42 SEQ #32
      DATE APPLIED:   1998-08-31 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch solves the following problems:
       2. Return the input X only, if encoding character is not defined.
       
      Nothing has been changed for the numeric data type input with encoding
      character, its result will contain the X with its corresponding check
      digit and algorithms.
       
      For example,
       
            >W $$M10^HLFNC("12345","|")
             12345|5|M10
        NOIS PHI-0798-20072 and PHI-0698-22536: Patient ID with alphanumeric
       
            >W $$M10^HLFNC("9999","^")
             9999^4^M10
       
            >W $$M11^HLFNC("128952","^")
             128952^7^M11
       
            >W $$M11^HLFNC("1234567","|")
             1234567|4|M11
       
                                                data type.
            >W $$M11^HLFNC("1234-F","|")
             1234-F||
       
            >W $$M10^HLFNC("401-56-1234","^")
             401-56-1234^^
       
       
      Routine Summary:
      ================
      The following is a list of the routines included in this patch.  The
       
      second line of each of these routines now looks like:
       
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
      Checksums:
      ==========
       
          Routine Name     Checksum Before     Checksum After       Patch List
          ------------     ---------------     --------------      ------------
            HLFNC              6477455             6494537             38,42
      The two extrinsic functions, $$M10^HLFNC(X,HLECDE) and
       
          From CHECK^XTSUMBLD 
       
       
      Installation Instructions:
      ==========================
        1.  Users are allowed to be on the system during the installation.
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
      $$M11^HLFNC(X,HLECDE) have been improved for the input ID with
        3.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        4.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
         
               Verify Checksums in Transport Global
               Print Transport Global 
               Compare Transport Global to Current System 
      alphanumeric data type.  The additional output will be as follows:
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*42
                             =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        5.  DSM Sites: Rebuild your mapped set if necessary.
       
       1. Return X concatenated with encoding characters, if X is alphanumeric.
      
    • 9 SEQ #7
      DATE APPLIED:   1996-06-27 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch to patch number 2 corrects errors in the first and second lines
      of the routines HLCS and HLCSDR2. Remaining code is unchanged.
       
      The checksum values are as follows:
      HLCS      value = 5044367
      HLCSDR2   value = 5218053
      
    • 14 SEQ #33
      DATE APPLIED:   1998-10-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
      6.  HL7 reference file updates to support draft 2 of HEALTH LEVEL SEVEN, 
          Version 2.3
       
      Please see the patch module on Forum for details.
      HL*1.6*14 introduces the following new features as part of the CIRN
      project and addresses a number of NOIS related issues:
       
      1.  Dynamic addressing of messages
      2.  Subscription registry (new file and APIs)
      3.  Auto-restart of logical links
      4.  Mapping of logical links to institutions (and related api's)
      5.  A new option to shut down all logical links
      
    • 37 SEQ #34
      DATE APPLIED:   1998-10-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch solves the following problems:
       second line of each of these routines now looks like:
       
            <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
       
       Checksums:
       ==========
       
           Routine Name     Checksum Before     Checksum After       Patch List
           ------------     ---------------     --------------      ------------
       NOIS ISB-1097-32281: Batch message transmission problems for both initial
             HLCSHDR           5439890             6047496              37
             HLTP0             3059585             3159167             25,37
       
           From CHECK^XTSUMBLD 
       
       
       Installation Instructions:
       ==========================
         1.  Users are allowed to be on the system during the installation.
         2.  Stop all the outgoing and incoming filers by using the HL7 "Stop
       and acknowledgement messages with missing acknowledgement code, reference
             all incoming filers" and "Stop all outgoing filers" options.
         3.  DSM SITES: Review your mapped set.  If any of the routines listed
             in the Routine Summary section are mapped, they should be removed
             from the mapped set at this time.
         4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
             option will load the KIDS package onto your system.  
         5.  The patch has now been loaded into a Transport global on your
             system. You now need to use KIDS to install the Transport global.
             On the KIDS menu, under the 'Installation' menu, use the following
             options:
       batch control ID, etc.  This was causing UNDEFINED variable errors in
       
                Verify Checksums in Transport Global
                Print Transport Global 
                Compare Transport Global to Current System 
                Backup a Transport Global
                Install Package(s) 
                INSTALL NAME: HL*1.6*37
                              =========
                Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
                and Protocols?'.
       HLTP01+47^HLTP01.
         6.  DSM Sites: Rebuild your mapped set if necessary.
         7.  Restart the outgoing and incoming filers, by using the HL7 "Start
             default number of incoming & outgoing filer" option, which have
             been stopped in step #2.
       
       Routine Summary:
       ================
       The following is a list of the routines included in this patch.  The
      
    • 15 SEQ #14
      DATE APPLIED:   1997-01-22 00:00:00
      APPLIED BY:   USER,ONE
    • 40 SEQ #35
      DATE APPLIED:   1998-11-19 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      DEVELOPERS: SEE BELOW FOR DESCRIPTION OF A NEW API
         site parameters.
      4. New field in 869.3 to support a local mail group for Messaging system
         alerts and notifications.
      5. New public FUNCTION CALL to retrieve an application-specific mail group
         for alerts and notifications pertaining to initiating or processing a
         particular transaction. The second piece returned is the
         active/inactive flag.
       
      GETAPP^HLCS2(HLAPP)
        ;Function to Retrieve parameters pertaining to a specific
      Summary:
      sending or receiving application
              ;HLAPP=APPLICATION NAME OR IEN OF FILE 771
              ;Returns MAIL GROUP NAME^'a' or 'i' (active or inactive) 
       
      EXAMPLE:KRN,KDE>S ZZPARMS=$$GETAPP^HLCS2("JC TEST SERVER") W ZZPARMS
       
      RESULT: ZZPARMS=JOHN^a
       
      1. Enhancements to Systems Link Monitor:
             -more information in header to help distinguish multiple displays.
             -provides both a full and abbreviated display format, as well as a
              help screen
      2. Additional required Messaging site parameters added to file 869.3.
      3. Updated option "Edit Communication Server Parameters" to support new
      
    • 19 SEQ #36
      DATE APPLIED:   1999-02-23 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      =============================================================================
      and in HL7 MESSAGE TEXT, file 772. To speed up the conversion, run the
               4 Compare Transport Global to Current System
               5 Backup a Transport Global
               6 Install Package(s)
                   INSTALL NAME: HL*1.6*19
                                 =========
      
            The length of the install depends on the size of file 772.  The average
            install takes about 15 minutes for 40,000 entries in file 772. 
      
        9.  Allow users back on the system and remove Taskman from wait state,
      'Purge Message Text File Entries' option to remove old messages.
            use the option 'Remove Taskman from WAIT State'.
      
       10.  Use the 'Edit Communication Server parameters' option to add a Mail
            Group to the 'Mail Group for Alerts' field.
      
       11.  Startup all Logical Links and incoming and outgoing filers. Use the
            'Restart All Links and Filers' option.
      
      
      =============================================================================  
        
      Data Dictionary Modifications:
      ============================== 
      
       869.1  HL LOWER LEVEL PROTOCOL TYPE
              No modifications were made to the data dictionary.  One record,
              TCP, has been added and will be merged into your current data.
       
       869.2  HL LOWER LEVEL PROTOCOL PARAMETER
       
              400.01    TCP/IP ADDRESS (F)  [400;1]
      Earlier version of Patch 19, prior to test version 25, are Uni-directional.
              400.02    TCP/IP PORT (NJ5,0)  [400;2]
              400.03    TCP/IP SERVICE TYPE (S)  [400;3]
              400.04    PERSISTENT (S)  [400;4]
              400.06    STARTUP NODE (P14.7)  [400;6]
      
       771.6  HL7 MESSAGE STATUS
              No modifications were made to the data dictionary.  Several new
              statuses have been added and will overwrite your current data.
      
       771.7  HL7 ERROR MESSAGE
      All TCP Logical Links must be redefined to work with this version of patch
              No modifications were made to the data dictionary.  Several new
              errors messages have been added and will overwrite your current data.
      
       772  HL7 MESSAGE TEXT
              The .01 field, DATE/TIME ENTERED, has been changed from a pointer to
              a date/time field.
      
       773  HL7 MESSAGE ADMINISTRATION
              The .01 field, DATE/TIME ENTERED, has been changed from a date/time to
              a pointer to file 772.  Fields have been added to this file for bi-
      19.  Messages might also need to be modified.
              directional TCP messages.
      
      
      New Option
      ============================== 
      
      'View Transmission Log'     Option name: HL VIEW TRANSMISSION LOG
           This option is used to view the Transmission Log; i.e.,
           the Message Administration File entries.  It displays those
           messages that have been sent or are pending. Display of
      
           messages with HL7 errors or exceptions is not yet supported.
      
      New Alert
      ==============================
      If a message exceeds the 'RE-TRANSMISION ATTEMPTS' for a Logical Link, an
      alert will be generated.  The alert will be sent to the Mail Group defined
      in the HL COMMUNICATION SERVER PARAMETERS file, 869.3.
      
      
      Routine Modifications:
      Description:
      ======================
      The following routines are included in this patch.  The second line of
      these routines now look like:
        
        <tab>;;1.6;HEALTH LEVEL SEVEN;**19**;JUL 17, 1995
      
      CHECK^XTSUMBLD results: 
         
       Routine Name   Before Patch    After Patch     Patch List 
       ============   ============    ===========     ==========
      ============
       HLCS            5666872         5781112        **2,9,14,19**
       HLCS1          10146376        10172566        **19**
       HLCSHDR         6047496         5939243        **37,19**
       HLCSHDR1        NEW             6658466        **19**
       HLCSIN          2120979         2517664        **2,30,14,19**
       HLCSLNCH        7065769        11290939        **6,19**
       HLCSRPT         NEW            14324083        **19**
       HLCSRPT1        NEW             9680356        **19**
       HLCSTCP         NEW             3731985        **19**
       HLCSTCP1        NEW             4613833        **19**
      This patch introduces TCP/IP as a transport layer for the HL7 package. 
       HLCSTCP2        NEW             7316489        **19**
       HLCSUTL         4322424         5134775        **2,19**
       HLDTIW2B        5008365         5012027        **14,19**
       HLDTIWP0        7906384         7922736        **19**
       HLDTIWU3        2154979         2083370        **19**
       HLMA            3791837         3745291        **19**
       HLMA1           4194174         4230657        **19**
       HLMA2           1082489         3410765        **19**
       HLPAT19         NEW              845483        **19**
       HLTF            7445472         7170159        **1,19**
      For information on how to work with TCP/IP HL7 interfaces, see the new 
       HLTF0           4765190         3173064        **12,19**
       HLTF1           9700889         9479987        **5,8,22,25,19**
       HLTP3           NEW            12380779        **19**
       HLTP4           NEW             7754632        **19**
       HLTPCK2         NEW             3804314        **19**
       HLTPCK2A        NEW            11350701        **19**
       HLUOPT1         9990663        11568432        **10,13,21,36,19**
       HLUTIL          4603738         1343106        **36,19**
       HLUTIL2         3877956         5547421        **19**
      
      "DHCP HL7 User Manual: TCP/IP Supplement", which is in the file
      
      
      Installation Instructions:
      ==========================    
        1.  Use the option 'Purge Message Text File Entries' option to remove
            old messages. Suggested answers:
      
          Enter the cutoff date for all messages REGARDLESS OF STATUS:  T-90// T-28
          Enter last INCLUSIVE date for status SUCCESSFULLY TRANSMITTED:  T-7// T-2
          Purge entries with an ERROR STATUS?  NO// YES
      HL71_6P19.PDF, available from the Customer Service anonymous directories.
          Cutoff date for AWAITING ACKNOWLEDGEMENT status:  T-30// T-7
      
        2.  Make sure all messages have been transmitted.  Run the option 'Systems
            Link Monitor', under the 'Communications Server' menu, and make sure
            'messages to send' is equal to 'messages sent' for all Logical Links.
      
        3.  Shutdown all Logical Links and incoming and outgoing filers. Use the
            'Shut Down All Logical Links', 'Stop all incoming filers', and 'Stop
            all outgoing filers' options.
      
      
        4.  User are NOT allowed on the system during installation.  Inhibit logins
            and place Taskman in a wait state, use the option 'Place Taskman in a
            WAIT State'.  Have the submanager shutdown after finishing their current
            task.
      
        5.  Some of these routines are new.  Currently we do not recommend that you
            add these routines to your map set.
        
        6.  Use the INSTALL/CHECK MESSAGE option on the PackMan menu. This
            option loads the KIDS package into a Transport global onto your
      This patch will convert the messages in HL7 MESSAGE ADMINISTRATION, file 773,
            system.
      
        7.  You now need to use KIDS to install the Transport global. From programmer
            prompt Do ^XPDKRN.
        
        8.  On the KIDS menu, under the Installation menu, use the following
            options:
        
               2 Verify Checksums in Transport Global
               3 Print Transport Global
      
    • 43 SEQ #37
      DATE APPLIED:   1999-04-27 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch addresses the following issues:
         HL LOWER LEVEL PROTOCOL PARAMETER file.
      4. The API GENERATE^HLMA would return the parameter HLRESLT, when passed
         by reference, equal to the message id.  But, multiple messages could
         have been generated.  This patch will now also return the array 
         HLRESLT, where HLRESLT(1)=2nd message id.
       
      Routine Modifications:
      ======================
      The following routines are included in this patch.  The second line of
      these routines now look like:
         
        
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
       
      CHECK^XTSUMBLD results: 
         
       Routine Name   Before Patch    After Patch     Patch List 
       ============   ============    ===========     ==========
       HLCS            5781112         5743323        2,9,14,19,43
       HLCS2           4802116         7195833        14,40,43
       HLCSAC          NEW             2497076        43
      1. Support is provided for connecting to the Master Patient Index (MPI).
       HLCSAS          NEW             2943880        43
       HLCSAS1         NEW             1742491        43
       HLCSLNCH       11290939        11368535        6,19,43
       HLCSTCP         3731985         4005742        19,43
       HLCSTCP1        4613833         4899040        19,43
       HLCSTCP2        7316489         7436704        19,43
       HLMA            3745291         5502295        19,43
       HLMA1           4230657         3849338        19,43
       HLMA2           3410765         7300625        19,43
       HLTF            7170159         7284127        1,19,43
      2. FileMan auditing ordinarily depends on DUZ, but when VA FileMan records
       HLTP            5532648         4283999        14,43
       HLTP3          12380779        12440103        19,43
       HLUTIL2         5547421         5380198        19,43
       
       
      Installation Instructions:
      ==========================
        1.  Users are allowed to be on the system during the installation.
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
         are updated by subscriber protocols, DUZ is undefined, disabling
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
       
        3.  Shutdown all Logical Links and incoming and outgoing filers. Use the
            'Shut Down All Logical Links', 'Stop all incoming filers', and 'Stop
            all outgoing filers' options.
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
       
         audting. Changes in this patch combined with changes that will be 
        5.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
       
               2 Verify Checksums in Transport Global
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global
               6 Install Package(s) 
         released VA FileMan V22.0 allow auditing based on subscriber protocol,
                   INSTALL NAME: HL*1.6*43
                                 =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the
            'Restart All Links and Filers' option.
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
         rather than DUZ.
      3. Autostart of a Logical Link now uses the AUTOSTART NODE field in the
      
    • 51 SEQ #39
      DATE APPLIED:   1999-05-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
       would return the following value:  DOE,JOHNSR
       
       This occurred because this function specifically checked from the second
       component to the last whether the next component contained two
       double quotes (e.g.: "") or had no value.  When this condition was
       encountered, this function did not place a space between each
       component and the component immediately following starting from the
       second.
        
       After this patch is installed, the return value will now be DOE,JOHN SR
      The CIRN developers was the first to discover and report a problem with
       for the above example.
       
       The following code may be used in programmer mode to test this function:
       NOTE:  The '>' character is the mumps programmer prompt.
       
       >R X
       DOE~JOHN~""~SR         <---Enter this data on the READ command.
       >W $$FMNAME^HLFNC(X,"~")
       DOE,JOHN SR            <---This should be the the result after this patch
                                 is installed.
      the function $$FMNAME^HLFNC(X,HLECDE). Additional details of their
       You may also try the following:
       >W $$FMNAME^HLFNC("DOE~JOHN~~SR","~")
       DOE,JOHN SR
       
      Before this patch is installed, you should have installed patch HL*1.6*42.
       
      Routine Summary: 
      ================
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
      findings are recorded in NOIS: BAY-0499-31160.
       
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995 
       
      Checksums: 
      ==========
       
          Routine Name     Checksum Before     Checksum After       Patch List 
          ------------     ---------------     --------------      ------------
            HLFNC              6494537             5785780           38,42,51
       
       
          From CHECK^XTSUMBLD 
       
       
      Installation Instructions: 
      ==========================
        1.  Users are allowed to be on the system during the installation.  
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
        3.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
       If the variable X is used as the first parameter of this function
            option will load the KIDS package onto your system.  
        4.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
            options: 
         
               Verify Checksums in Transport Global 
               Print Transport Global 
               Compare Transport Global to Current System 
               Backup a Transport Global 
       and has a value of DOE~JOHN~""~SR
               Install Package(s) 
               INSTALL NAME: HL*1.6*51 
                             =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
               and Protocols?'.  
        5.  DSM Sites: Rebuild your mapped set if necessary.  
        
       this function when invoked (e.g.:  S Y=$$FMNAME^HLFNC(X,"~")         )
      
    • 48 SEQ #40
      DATE APPLIED:   1999-06-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch solves the following problems:
       
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
       
      Checksums:
      ==========
       
          Routine Name     Checksum Before     Checksum After       Patch List
          ------------     ---------------     --------------      ------------
            HLCSMON           9246839             9506155            34,40,48
        NOIS BHH-0299-40326: The Logical Links, displayed on the System Monitor
       
          From CHECK^XTSUMBLD 
       
       
      Installation Instructions:
      ==========================
        1.  Users are allowed to be on the system during the installation.
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
                             last screen, were duplicates from some of the
        3.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        4.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
       
               Verify Checksums in Transport Global
               Print Transport Global 
               Compare Transport Global to Current System 
                             Logical Links of its previous screen.
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*48
                             =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        5.  DSM Sites: Rebuild your mapped set if necessary.
       
      Routine Summary:
      ================
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
      
    • 44 SEQ #41
      DATE APPLIED:   1999-06-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch solves the following problem:
       
            <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
       
       Checksums:
       ==========
       
           Routine Name     Checksum Before     Checksum After       Patch List
           ------------     ---------------     --------------      ------------
             HLCSDL             4175013            4198429             2,44
        To prevent an "undefined variable HLDP" error for the X3.28 lower level
       
           From CHECK^XTSUMBLD 
       
       
       Installation Instructions:
       ==========================
         1.  Users are allowed to be on the system during the installation.
         2.  Use the HL7 "Stop LLP" to stop the LLPs, which are executed in
             X3.28 protocol.
         3.  DSM SITES: Review your mapped set.  If any of the routines listed
        protocol. This error occurs when starting the LLP, it fails to establish
             in the Routine Summary section are mapped, they should be removed
             from the mapped set at this time.
         4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
             option will load the KIDS package onto your system.  
         5.  The patch has now been loaded into a Transport global on your
             system. You now need to use KIDS to install the Transport global.
             On the KIDS menu, under the 'Installation' menu, use the following
             options:
       
                Verify Checksums in Transport Global
        a connection and autostart is enabled.
                Print Transport Global 
                Compare Transport Global to Current System 
                Backup a Transport Global
                Install Package(s) 
                INSTALL NAME: HL*1.6*44
                              =========
                Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
                and Protocols?'.
         6.  DSM Sites: Rebuild your mapped set if necessary.
         7.  Restart the LLPs by using the HL7 "Start LLP" option, which have
       
             been stopped in step #2.
       Routine Summary:
       ================
       The following is a list of the routines included in this patch.  The
       second line of each of these routines now looks like:
      
    • 55 SEQ #42
      DATE APPLIED:   1999-07-19 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch corrects the problem identified in NOIS IVM-0499-31407,
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
       
      CHECK^XTSUMBLD results: 
         
       Routine Name   Before Patch    After Patch     Patch List 
       ============   ============    ===========     ==========
       HLTF             7284127        7261750        1,19,43,55
       
       
      Installation Instructions:
      message IDs no longer created for version 1.5 messages.
      ==========================
        1.  Users are allowed to be on the system during the installation.
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
       
        3.  Shutdown all Logical Links and incoming and outgoing filers. Use the
            'Shut Down All Logical Links', 'Stop all incoming filers', and 'Stop
            all outgoing filers' options.
      
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
       
        5.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
       
               2 Verify Checksums in Transport Global
      
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*55
                                 =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the
      Routine Modifications:
            'Restart All Links and Filers' option.
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
      
      ======================
      The following routines are included in this patch.  The second line of
      these routines now look like:
        
      
    • 16 SEQ #9
      DESCRIPTION:   
      Informational
      
    • 50 SEQ #43
      DATE APPLIED:   1999-07-19 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Description:
      the message text after selecting an individual record from the list. 
       773  HL7 MESSAGE ADMINISTRATION
              The STATUS field, #20, has been changed to add the "AG"
      cross-reference.
      The other NOIS reported the routine HLCSRPT errorred out with an 
      undefined variable message in some circumstances. 
       
      Second, additional functionality is provided as follows:
      Refined message searchs. The messages search is now expanded to allow
      the user to select a message search based any combination (or all) of
      the search fields. They include status code, message type, event type
      and logical link. The default entry for each field is "ALL". As before,
      all message searching will be limited to a user entered start date/time.
      ============
      The single criteria message searching is replaced with this enhanced 
      searching capability. 
      Pending messages. The option for pending messages has not changed.
      Error listing. An option providing for the display of messages that
      are in an error status is added. The default is all errorred messages,
      but the user may select a specific error code.
       
      This patch also contains the DD for file 773, Message Administration
      File. It adds a new cross-reference, "AG", which pertains to the
      Status field. A Post-Install routine is run to set the cross-reference.
      This patch requires running the purge message option and shutting down
       
      Routine Summary:
      ================
      The following routines are included in this patch.  The second line of
      each
      of these routines now looks like:
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
       
                       Checksum
      Routine           Old       New        2nd Line
      all links and filers before installing the patch.
      HLCSRPT         14324083  10630512     **19,50**
      HLCSRPT1         9680356  13849369     **19,50**
      HLCSRPT2          NEW     18087507     **50**
      HLCSRPT3          NEW     10792707     **50**
      HLP50PST          NEW        36805     **50**
       
      List of preceding patches: 19
      Sites should use CHECK^XTSUMBLD to verify checksums.
       
      Installation Instructions:
       
      ==========================    
        1.  Use the option 'Purge Message Text File Entries' option to remove
            old messages.
       
        2.  Make sure all messages have been transmitted.  Run the option
      'Systems
            Link Monitor', under the 'Communications Server' menu, and make sure
            'messages to send' is equal to 'messages sent' for all Logical
      Links.
       
      This patch provides both additional functionality and NOIS fixes.
        3.  Shutdown all Logical Links and incoming and outgoing filers. Use the
            'Shut Down All Logical Links', 'Stop all incoming filers', and 'Stop
            all outgoing filers' options.
       
        4.  User are allowed on the system during installation.  Do NOT inhibit
      logins
            and do NOT place Taskman in a wait state.
       
        5.  Some of these routines are new.  Currently we do not recommend that
      you
       
            add these routines to your map set.
        
        6.  Use the INSTALL/CHECK MESSAGE option on the PackMan menu. This
            option loads the KIDS package into a Transport global onto your
            system.
       
        7.  You now need to use KIDS to install the Transport global. From
      programmer
            prompt Do ^XPDKRN.
        
      First, it provides fixes for the following NOISes:  BAC-0599-40603 and 
        8.  On the KIDS menu, under the Installation menu, use the following
            options:
        
               2 Verify Checksums in Transport Global
               3 Print Transport Global
               4 Compare Transport Global to Current System
               5 Backup a Transport Global
               6 Install Package(s)
                   INSTALL NAME: HL*1.6*50
                                 =========
      IND-0599-40402. One NOIS reported, in some cases, a failure to display 
       
        9.  Startup all Logical Links and incoming and outgoing filers. Use the
            'Restart All Links and Filers' option.
       
       
      ==========================================================================
      ===  
      Data Dictionary Modifications:
      ============================== 
       
      
    • 47 SEQ #44
      DATE APPLIED:   1999-07-19 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch has made changes for the following:
            TaskMan, and as the default when run interactively.
        4.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
        5.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        6.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
       
       
               Verify Checksums in Transport Global
               Print Transport Global 
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*47
                             =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        7.  DSM Sites: Rebuild your mapped set if necessary.
          - Field #869.3,42   PURGE AWAITING ACK MESSAGES:  The number of days
        8.  Restart all the Logical links, incoming and outgoing filers, which
            have been stopped in step #3.
        9.  Re-schedule 'HL PURGE TRANSMISSIONS' option if this option was
            scheduled and has been stopped in step #2.
       10.  Use the "Edit Communication Server parameters" option to enter
            and/or change the data described in DESCRIPTION section for fields-
            (#869.3,41), (#869.3,42), and (#869.3,43).
            "Awaiting Application Acknowledgement" messages are retained before
            they are purged.  If no value is entered, the default is 30 days.
            Used as the actual value when the "Purge Messages" option is
            scheduled through TaskMan, and as the default when run
            interactively.
       
          - Field #869.3,43  PURGE ALL MESSAGES:  The number of days that any
       
            status message are retained before they are purged(except for ERROR
            status messages).  If no value is entered, the default is 90 days.
            Used as the actual value when the "Purge Messages" option is
            scheduled through TaskMan, and as the default when run
            interactively.
       
          Please find the following HL7 options to enter or change data for
          fields described above:
       
            step 1. HL MAIN MENU
       1. Adds three new fields in HL COMMUNICATION SERVER PARAMETERS file
            step 2. Communications Server ...
            step 3. Edit Communication Server parameters
       
            And then you will enter the FileMan ScreenMan form as follows:
          
           --------------------------------------------------------------------
       
                                    Edit HL7 Site Parameters
       
       
          (#869.3): 
                                 Current Domain: NXT.KERNEL.ISC-SF.DOMAIN.EXT      
                            Current Institution: ISC SAN FRANCISCO             
           Is this a Production or Test Account? test      
       
              Default Number of Incoming Filers: 1 
              Default Number of Outgoing Filers: 1 
       
                          Mail Group for Alerts: HL7                           
       
                Days to Keep Completed Messages: 7  
       
             Days to Keep Awaiting ACK Messages: 30 
               Days Before Purging All Messages: 90 
       
            ________________________________________________________________
       
       
            COMMAND:                                    Press <PF1>H for help
            Insert
       
            -----------------------------------------------------------------
          - Field #869.3,41 PURGE COMPLETED MESSAGES:  The number of days
       
          The old method which was used to change the data for the above three
          fields, by entering numbers in the TASK PARAMETERS field of the OPTION
          SCHEDULING FILE, will be replaced by this new method as described
          above, when the "Purge Message Text File Entries [HL PURGE
          TRANSMISSIONS]" OPTION is scheduled to TaskMan.
       
       2. Brings in updated data for files: HL7 MESSAGE STATUS and HL7 ERROR
          MESSAGE, these two files can only be used by HL7 routines.
       
            "Successfully Completed" messages are retained before they are
       3. Solves problems for NOIS ISF-0499-63255: Entries existed in file #773
          with broken pointers to file #772.
       
      Routine Summary:
      ================
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
       
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
            purged.  If no value is entered, the default is 7 days.  Used as the
       
      Checksums:
      ==========
       
        Routine Name    Checksum Before    Checksum After       Patch List
        ------------    ---------------    --------------     -----------------
          HL47PRE            new               613093                 47
          HLUOPT1          11568432          13112533          10,13,21,36,19,47
          HLTP01            5246181           5245980             2,25,34,47
          HLTP1             4286152           4286011               34,47
            actual value when the "Purge Messages" option is scheduled through
       
          From CHECK^XTSUMBLD 
       
                                                    
      Installation Instructions:
      ==========================
        1.  Users are allowed to be on the system during the installation.
        2.  Check and make sure that the 'HL PURGE TRANSMISSIONS' option is not
            scheduled during the time of installation.
        3.  Stop all the Logical links, incoming and outgoing filers.
      
    • 49 SEQ #45
      DATE APPLIED:   1999-10-03 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Description: 
       
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in 
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
       
        3.  Shutdown all Logical Links and incoming and outgoing filers. Use the 
            'Shut Down All Logical Links', 'Stop all incoming filers', and 'Stop 
            all outgoing filers' options.
       
            For DSM sites ONLY, if you have an HL7 UCX Service associated
       After this patch is installed, non-persistent client LLPs
            with the account(uci/directory) where you are installing this patch,
            please disable this service.
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
            option will load the KIDS package onto your system.  
       
        5.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
            options: 
       will still have to be started as they were before this patch.
       
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*49
                                 =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
               and Protocols?'.  
       To start an LLP, use the 'Start LLP' option.
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the 
            'Restart All Links and Filers' option.  
       
            For DSM sites ONLY, if you previously disabled an HL7 UCX Service
            for this installation, you may now enable it.
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
       
        8.  Start Link Manager as follows:
       To start an LLP automatically after a system reboot,
       
       STEP 1:  HL7 Main Menu
       STEP 2:  V1.6 OPTIONS
       STEP 3:  Communications Server
       STEP 4:  TCP/IP Link Manager Start/Stop
       
      Link Manager is NOT currently running!
       
       Would you like to start the Link Manager now? YES// 
       Link Manager queued as task number 2712635
       either use the Interface Workbench to edit Logical Links or use FileMan
       
        9.  Create entry in OPTION SCHEDULING file as follows:
       
       In order to set up this option to startup when the system/TaskMan starts,
       please find the following HL7 options to create an entry
       in the OPTION SCHEDULING file:
       
       STEP 1:  Taskman Management ...  
       STEP 2:  Schedule/Unschedule Options 
       STEP 3 (Create the following entry): 
       to edit the AUTOSTART field(#4.5) of the HL LOGICAL LINK file(#870).
       
      Select OPTION to schedule or reschedule: HL AUTOSTART LINK MANAGER 
        Are you adding 'HL AUTOSTART LINK MANAGER' as 
          a new OPTION SCHEDULING (the 12TH)? No// Y 
       
       STEP 4 (From STEP 3 you will automatically enter the FileMan ScreenMan form 
              as follows and you should edit the 'SPECIAL QUEUEING' field 
              to have a value of 'Startup Persistent'): 
       
                                Edit Option Schedule
       For each Logical Link that wish to start automatically after a re-boot
          Option Name: HL AUTOSTART LINK MANAGER     
          Menu Text: Autostart Link Manager                    TASK ID:
        __________________________________________________________________________
       
        QUEUED TO RUN AT WHAT TIME:
       
      DEVICE FOR QUEUED JOB OUTPUT:
       
       QUEUED TO RUN ON VOLUME SET:
       
       of the system, you must edit the AUTOSTART field to have a value
            RESCHEDULING FREQUENCY:
       
                   TASK PARAMETERS:
       
                  SPECIAL QUEUEING: Startup Persistent  
       
      _______________________________________________________________________________
       
       
       
       of ENABLED.  Do NOT simply enable the AUTOSTART field
       
       
      COMMAND:                                       Press <PF1>H for help    Insert 
       
      =============================================================================  
      Data Dictionary Modifications: 
      ============================== 
       869.2  HL LOWER LEVEL PROTOCOL PARAMETER 
       
              400.05    RETENTION (NJ6,0), [400;5]  (new)
      ============
       for all Logical Links. Only select those that you wish start
       
       869.3  HL COMMUNICATION SERVER PARAMETERS
       
              51        DEFAULT RETENTION (NJ6,0), [5;1]  (new)
       
              52        LINK MANAGER TASK NUMBER (NJ15,0), [5;2]  (new)
       
              53        STOP LINK MANAGER (S), [5;3]  (new)
       
              54        LM LAST KNOWN $H (F), [5;4]  (new)
       that are both legitimate and appropriate for your site.
       
       870    HL LOGICAL LINK
       
              3         LLP ONLINE (S), [0;4]  (old)
       
                    changed to:
       
              3         DEVICE TYPE (S), [0;4]   (new)
       
      New Options:
       
      ============================== 
       'TCP/IP Link Manager Start/Stop'  Option name: HL START/STOP LINK MANAGER
       'Autostart Link Manager'          Option name: HL AUTOSTART LINK MANAGER
       
      New for Systems Link Monitor:
      ==============================
       
        1.  Status of whether TaskMan is currently running.
        2.  Status of whether Link Manager currently running.
        3.  Additional STATES for non-persistent client links:
       Note, although you may have started a non-persistent LLP,
            o  ENABLED
            o  INACTIVE
        4.  New DEVICE TYPE column replaces DEVICE ON-LINE column.
        5.  New DEVICE TYPES:
                                    PC -- Persistent TCP/IP Client
                                    NC -- Non-Persistent TCP/IP Client
                                    SS -- Single-threaded TCP/IP Server
                                    MS -- Multi-threaded TCP/IP Server
                                    SH -- Serial HLLP
                                    SX -- Serial X3.28
       the system process representing this LLP does not actually start
                                    MM -- MailMan
       
       
      Configuration considerations:
      ==============================
       
       The only configuration parameter is Retention.  
       This may be edited per Logical Link using the Interface Workbench.  
       Also, a Default Retention time may be edited 
       using the 'Edit Communication Server parameters' option.  
       until messages are in the associated message queue.  Once a process
       
       The order of precedence for Retention is as follows: 
       
                 1.  Retention (Per Logical Link value overrides any defaults).
                 2.  Default Retention (System-wide account default.
                                       If valued, this field is the default
                                       per Logical Link when the Retention
                                       field is left unvalued).
                 3.  15 seconds (System-wide account default.  This value
                                is used when both Retention and Default
       is started, it will remain running on the system until the associated
                                Retention are left unvalued).
       
       You may wish to accept the system-wide default of 15 seconds for 
       Retention of your non-persistent TCP/IP client Logical Links.  
       Once you become more familiar with the frequency and load of each link, 
       you may adjust these Retention values accordingly.  
       
      Troubleshooting information:
      ============================
       The HL7 Systems Link Monitor is a useful tool to help
       queue is emptied and the associated Retention time has expired.
       you troubleshoot problems with either the Link Manager
       or the individual Logical Links.  This tool will monitor
       both TaskMan and Link Manager. When either of these
       does not appear to be running, a warning will be
       displayed on the Systems Link Monitor.
       
       
       ALERT NOTIFICATION
       
       It highly recommended that sites establish a mail group
       The Retention time is the time in seconds in which the LLP process
       for HL7 related alerts.  Once this has been establish,
       use the 'Edit Communication Server parameters' option
       to identify the Mail Group for Alerts.
       
       If a mail group has been created and identified, the Link Manager
       will use this mail group to send the following alert whenever
       it finds a configuration problem between the links and TaskMan:
       
       HL7 Logical Link LLname shutdown due to TaskMan unable to process task request
       
       will wait while continually checking for messages in the associated
       The most likely cause for receiving such an alert is having TaskMan running
       in non-DCL context and having a Logical Link with an associated
       STARTUP NODE other than where TaskMan is currently running.  This applies
       to both the AXP and AVANTI sites.
       
       After receiving this alert, make the needed corrections and restart
       the Logical Link if necessary.
       This patch addresses the issue of reducing the number of required logical
       message queue.  If messages are found in the queue before the retention
       time has expired, the LLP process will continue to de-queue messages
       as before.  Otherwise, the LLP process will actually return back
       to TaskMan's sub-manager and possibly terminate.  When this occurs,
       a status of INACTIVE is indicated on the STATE column
       of the system link monitor for this LLP.  
       
       
      This patch also addresses the following issues: 
         
       links running as active concurrent processes.  Before this patch,
        1.  Fix allocation error in HLCSDR.
            Related NOIS:        SFC-0599-60101
                                 SBY-0199-30725
                                 HIN-1298-40436
            Actual error:  $ZE= INT+22^%ET:1, %DSM-E-ALLOC, allocation failure
             Description:  This error was first seen after the introduction of
                           patch HL*1.6*14.  This patch 14, utilized error
                           trapping to trap disconnect errors so that processing
                           may continue once the errors have passed.  However,
                           if the associated port/device was bad/busy, the code
       all possible HL7 TCP/IP Client Logical Links would have to be defined
                           would continually loop to the code that sets the trap.
                           As the stack continues to grow, an allocation error
                           would result in about 4 to 6+ hours after the logical
                           link was started or when the device became bad/busy.
                           This allocation error was seen associated with
                           the applications using the serial HLLP protocol of
                           the HL7 v1.6 (HLCSDR* routines).
       
        2.  Fix allocation error in HLCSMON.
            Description:  If a user enters '?' and <RET> repeatedly at the
       and started as LLPs.  These LLPs would run and remain as active processes
                          command prompt of the Systems Link Monitor, an
                          allocation error will be encountered after 6+ attempts.
       
        3.  Fix extraneous display of **STOP** on CACHE sites.
            Related NOIS:        MAN-0799-11246
            Description:  When the Restart All Links and Filers option is run,
                          **STOP** is displayed after failing to connect to
                          a listener.  This is now corrected by this patch.
       
      Routine Modifications: 
       on the system regardless of the frequency to deliver HL7 messages.
      ======================
      The following routines are included in this patch.  The second line of these
      routines now looks like:
       
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;29-Jan-97 14:25
       
      CHECK^XTSUMBLD results: 
         
       Routine Name   Before Patch    After Patch     Patch List 
       ============   ============    ===========     ==========
       This was true with both persistent and non-persistent client
       HLCS2           7195833         8763479        14,40,43,49
       HLCSDL          4198429         4174780        2,44,49
       HLCSDR          3946224         3936049        2,14,49
       HLCSLM          NEW             6276510        49
       HLCSLNCH       11368535        12855635        6,19,43,49
       HLCSLSM         NEW              154819        49
       HLCSMM1         1462301         1445162        35,49
       HLCSMON         9506155        10703763        34,40,48,49
       HLCSMON1        3987859         5535017        15,40,49
       HLCSTCP         4005742         4550642        19,43,49
       connection-type LLPs.
       HLCSTCP2        7436704         7773433        19,43,49
       HLCSTERM        2560922         2618931        40,49
       HLDTIW2A        4178875         4164880        14,49
       HLDTIW2B        5012027         5250753        14,19,49
       HLDTIWP1        8445958         8449802        14,49
       
       
      Installation Instructions: 
      ==========================
        1.  Users are allowed to be on the system during the installation.  
      
    • 39 SEQ #46
      DATE APPLIED:   1999-10-19 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Distribute VA TCP Logical Link definitions. 
      
    • 54 SEQ #47
      DATE APPLIED:   2000-02-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch does the following works to comply with the HL7 standard:
           - #773,16 (event type).
           - #773,15 (message type).
           - Sub-field: #771.06,.01 (message type) of field #771,6.
        4. Deletes duplicate entries in file #779.001 and #771.2.
        5. Bring new data of version, event types, and message types into files,
           #771.5 (HL7 Version file), #779.001 and #771.2, to comply with HL7
           2.3 and 2.3.1 Standard.
       
       
      Routine Summary:
       
      ================
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
       
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
       
      Checksums:
      ==========
       
        1. Modifies some entries in file #779.001 (HL7 Event Type Code file) and
        Routine Name    Checksum Before    Checksum After       Patch List
        ------------    ---------------    --------------       ----------
          HLPAT54            new              7691750               54
       
          From CHECK^XTSUMBLD 
       
       
      Installation Instructions:
      ==========================
        1.  Users are allowed to be on the system during the installation.
           #771.2 (HL7 Message Type file).
        2.  Stop all the Logical links, incoming and outgoing filers.
        3.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        4.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
       
               Verify Checksums in Transport Global
               Print Transport Global 
        2. Finds duplicate entries in file #779.001 and #771.2.
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*54
                             =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        5.  Restart all the Logical links, incoming and outgoing filers, which
            have been stopped in step #3.
        3. Resolves duplicate entries pointers for the following fields:
           - #101,770.4 (event type).
           - #101,770.3 (message type).
           - #101,770.11 (message type).
      
    • 57 SEQ #48
      DATE APPLIED:   2000-02-29 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       VISTA HL7 patch HL*1.6*57 addresses most of the outstanding HL7 1.6
      Interfaces are now more intuitive, consistent and simpler regardless of
       re-transmissions, the action below will be performed.
       
       
       200.21 EXCEED RE-TRANSMIT ACTION 200;10 SET
         'I' FOR ignore; 
         'R' FOR restart; 
         'S' FOR shutdown;
       
        DESCRIPTION:      This field determines what to do when a message exceeds
       the number of retry attempts for this Logical Link.
      the role of the VISTA system as sender or receiver or the mode of
       Actions are: Ignore  = send alert once and keep trying to resend
                    Restart = send alert once and shutdown link then start link
                   Shutdown = send alert once and shutdown link
       
      (2)     There is a new entry in HL7 ERROR MESSAGE file, #771.7.
       
        CODE: 109                               SHORT TEXT: Duplicate Message
       DESCRIPTION:   Message has already been received and processed.  This is
                      a duplicate. 
       
      communication (Mailman, TCP, serial, local app-to-app). The number of
       The following NOIS's are addressed by this patch:
             ISF-0499-61219
             ISF-0499-61021
             BRX-0499-11335
             MIA-0499-31927
             SAG-0599-42045
             ISH-0696-40781
             BAY-1099-32639
             SLC-1099-51078
             BAY-0499-31357
      protocol definitions that are required to support a simple interface has
             SDC-1099-62397
             ISB-1099-31173
             BAC-0699-40281
             BIG-0999-72027
       
      15. The DATE/TIME field of the HL7 Message Header has been enhanced to
      include the timezone offset.
       
      16. New public functions:
       
      been reduced in most cases to just two.
            MSGSTAT^HLUTIL(X)      ;message status
              input value:   X = message id
              return value: status^status updated^error msg.^error type pointer^
                    status:
                             0 = message doesn't exist
                             1 = pending transmission
                           1.5 = being transmitted
                             2 = awaiting application acknowledgement
                             3 = successfully completed
                             4 = error
       
                             8 = being generated
                             9 = awaiting processing
       
            MSGACT^HLUTIL(X,HLIENACT)      ;outgoing message action
              input value:   X = message id
                             HLIENACT = 1-cancel; 2-requeue
              return value:  1 = action sucessfull
                             0 = action failed
       
            CHKLL^HLUTIL(X)        ;check setup of Logical Link
      3.     Redesigned Menu. The HL7 MAIN MENU option has been completely
              input value:   X = institution name or number
              return value:  1 = setup OK
                             0 = LL setup incorrect
       
      17. New Option: "Validate Interfaces"
       
      Use this option to check your interface setups for potential problems.
      Starting with an Event Driver Protocol, the event driver, subscriber(s)
      and application definitions will be scanned and a report generated.
       
      reorganized to reflect user preferences both from the field and the JAD
      After patch 57 is installed, your pre-57 interfaces will continue to work.
      However, you may be interested in upgrading your existing interfaces to
      the post-57 style to take advantage of the new features. If you run this
      option on a pre-57 setup, you can use the report as a guide for making
      modifications. If your post-57 setup results in fewer protocols, be sure
      to remove the unneeded protocols. Remember-if the report on a pre-57
      interface reports errors, it does NOT mean the interface has been broken
      or will stop working because of patch 57. Use the report as a guide only
      for upgrading or for troubleshooting an existing POST-57 interface.
       
      Focus Group.
      No conversion of existing interfaces that have been properly defined will
      be necessary.
       
      Additional details regarding changes to the Application Parameter File,
      Event Point Protocols, Subscriber Protocols and key related fields are
      defined below. 
       
       The following routines are included in this patch.  The second line of each
       of these routines now looks like:
        ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
       
       
       CHECK^XTSUMBLD results: 
         
       Routine Name   Before Patch    After Patch     Patch List 
       ============   ============    ===========     ==========
       HLCS             5743323         5745388       2,9,14,19,43,57
       HLCS2            8763479        10072062       14,40,43,49,57
       HLCSAS1          1742491         1743950       43,57
       HLCSDL           4174780         4111820       2,44,49,57
       HLCSDR           3936049         3904673       2,14,49,57
      deficiencies cited by the HL7 Joint Application Development (JAD) Focus
      4.     Event types for version 2.1 messages are no longer required. HL7
       HLCSFMN0         5857525         5857070       15,57
       HLCSFMN2         NEW             1942573       57
       HLCSHDR          5939243         7364841       37,19,57
       HLCSHDR1         6658466         7750238       19,57
       HLCSHDR2         NEW             1077600       57
       HLCSLM            157679         6371649       49,57
       HLCSLNCH        12855635        12643769       6,19,43,49,57
       HLCSLSM           154819          191876       49,57
       HLCSMM           2776063         2836421       17,35,57
       HLCSORAT         5245857         5441831       57
      1.6 is now backward compatible to HL7 Standard, version 2.1 transactions.
       HLCSRPT3        10792707        10830740       50,57
       HLCSTCP          4469052         5152314       19,43,49,57
       HLCSTCP1         4899040         4965932       19,43,57
       HLCSTCP2         7731395        10328595       19,43,49,57
       HLERCHK          NEW            12063792       57
       HLFNC2           5393929         5397412       2,26,57
       HLMA2            3410765         7268935       19,43,57
       HLPAT57          NEW             1630585       57
       HLSUB            4535863         5277110       14,57
       HLTP01           5245980         5262489       2,25,34,47,57
      VISTA HL7 version 1.5 interfaces should be upgraded to 1.6 as soon as
       HLTP3           12440103        14050232       19,43,57
       HLTP31           NEW             1680845       57
       HLTP4            7754632         7805100       19,57
       HLTPCK1A         7334335        14402537       2,25,34,57
       HLTPCK2A        11350701        15262342       19,57
       HLUOPT          11331726        11707096       57
       HLUTIL            134301         2643574       36,19,57
       HLUTIL2          5380198         5387464       19,43,57
       
      List of preceding patches: 14, 15, 26, 34, 35, 43, 49, 50
      possible. Version 1.5 fields have been marked for removal from the system.
      Sites should use CHECK^XTSUMBLD to verify checksums.
       
      Installation Instructions: 
      ==========================
        1.  Users are allowed to be on the system during the installation.  
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
       
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
      Once this occurs, version 1.5 interfaces will no longer function. There
       
        3.  Shutdown all Logical Links and incoming and outgoing filers, and
            the Link Manager. Use the opitons:
       
             Shut Down All Logical Links
             Stop all incoming filers
             Stop all outgoing filers
             TCP/IP Link Manager Start/Stop
       
            For DSM sites ONLY, if you have an HL7 UCX Service associated
      should be no new development using the 1.5 interface method.
            with the account(uci/directory) where you are installing this patch,
            please disable this service.
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
            option will load the KIDS package onto your system.  
       
        5.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
            options: 
       
       
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*57
                                 =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
               and Protocols?'.  
      5.     Merger of Split Logical Link and Lower Level Protocol Parameter
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the 
            'Restart/Start All Links and Filers' option.  
       
            For DSM sites ONLY, if you previously disabled an HL7 UCX Service
            for this installation, you may now enable it.
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
       
        8.  Start Link Manager using the option: "TCP/IP
      Files. File 870 (Logical Link) and file 869.2 (HL LOWER LEVEL PROTOCOL
              Link Manager Start/Stop."
       
      =========================================================================
       
      For a complete and up-to-date set of documents, tutorials and
      presentations (and access to the HL7 Standard) please
      visit the OpenVista Website (frequently) at:
       
      http://vista2.domain.ext/openvista/
       
      PARAMETER) have been merged into a single file.
      At this site, you'll be able to find the new DEVELOPER MANUAL as well as
      supplemental information on DYNAMIC ADDRESSING and TCP/IP SUPPORT.
      =========================================================================
       
       
       
                   Interface Configuration with Patch 57
       
      This section explains what has changed with Patch 57, and how the various
      files and fields will be used and the new business rules associated with
      Group and Part 2 of the OpenVISTA Tactical Plan.
       
      validating a message header.
       
                         Event Point Protocols
       
      An event point protocol is a specific type of HL7 protocol defined in file
      101. It represents the sending side of a particular HL7 transaction. It
      does not have to be a VISTA event point. However, if the event point
      originates in VISTA, several fields have been renamed along with changes
      to underlying code to more clearly define how VISTA HL7 uses them. When a
      message is being generated in VISTA, the header will contain the data from
      6.     Response message type and event type can now be different from the
      these fields and is delivered to each of the subscribers found in the
      SUBSCRIBERS multiple. Note that the ITEM multiple is no longer used for
      HL7 transactions.
       
      Event Driver Protocol Key Fields
       
      770.1     SENDING APPLICATION (P771), [770;1]
      770.3     TRANSACTION MESSAGE TYPE (P771.2'), [770;3]
      770.4     EVENT TYPE (P779.001'), [770;4]
      770.6     PROCESSING ID (S), [770;6]
      initial message's message type/event type pair. The Transaction Message
      770.8     ACCEPT ACK CODE (P779.003'), [770;8]
      770.9     APPLICATION ACK TYPE (P779.003'), [770;9]
      770.95    VERSION ID (*P771.5'), [770;10]
      772       RESPONSE PROCESSING ROUTINE (K), [772;E1,245]
      775       SUBSCRIBERS (Multiple-101.0775), [775;0]
                .01  SUBSCRIBERS (M*P101), [0;1]
       
       
                            Subscriber Protocols
       
      type and Event type are no longer defined on the subscriber protocol for a
      This type of protocol contains all of the parameters for and is always
      associated with the RECEIVING SYSTEM. The logical link field can be used
      to describe a single point-to-point interface between a sending and
      receiving system. If this interface included two VISTA systems, the
      logical link would always point to the remote system. All other settings
      in the interface definition would remain the same on both systems. The
      RESPONSE MESSAGE TYPE and EVENT TYPE are now used only for responses. 
       
      When a message is received, the following validation checks are performed.
      On the receiving system, the HL7 package parses the inbound message header
      message to be successfully delivered. This information is now derived from
      and identifies the Sending Application, Receiving Application, Message
      Type, Event Type and version. If the event type is missing, it validates
      that the version is less than 2.2. It validates the sending and receiving
      application by checking them against the Application Parameter file. If
      they are missing or "Inactive" an error is logged. It then looks up the
      Event Driver protocol using the AHL1 cross-reference or, if missing the
      event type, uses the new AHL21 cross-reference on file 101. Delivery to
      the Subscriber protocol is then based on Receiving Application. An error
      is recorded if either the event driver or subscriber protocol cannot be
      found. Next, HL7 sets the logical link for the "return path" based on the
      the Event Point Protocol only. The Response Message Type and Event Type
      entry in the logical link field, (field 770.7). HL7 then checks to see if
      the sending and/or receiving facility fields are required for each
      application in the transaction (file 771). If the sending or receiving
      facility is required and the header is blank an error is logged. If the
      facility information in the header differs from data in file 771 an error
      is logged. If no data exists in the application parameter file but the
      facility information is required, HL7 expects the header to contain the
      new default facility data. The receiving facility data is checked against
      the receiving system's site parameter settings and the sending facility
      data is checked against the logical link definition (file 870). If the
      fields are now used for defining the message type and event type of the
      sending facility data (Domain name) is present and cannot resolve to a
      logical link, an error is logged, otherwise, the logical link of the
      sending facility is used as the return path for responses regardless of
      how the subscriber protocol logical link field was defined.
       
      Subscriber Protocol Key Fields:
       
      770.11    RESPONSE MESSAGE TYPE (P771.2'), [770;11]
      770.2     RECEIVING APPLICATION (P771), [770;2]
      770.4     EVENT TYPE (P779.001'), [770;4]
      subscriber response. 
      770.6     PROCESSING ID (S), [770;6]
      770.7     LOGICAL LINK (P870'), [770;7]
      771       PROCESSING ROUTINE (K), [771;E1,245]
      773.1     SENDING FACILITY REQUIRED? (S), [773;1]
      773.2     RECEIVING FACILITY REQUIRED? (S), [773;2]
      773.3     SECURITY REQUIRED? (S), [773;3]
      773.4     DATE/TIME OF MESSAGE REQUIRED? (S), [773;4]
      774       ROUTING LOGIC (K), [774;E1,245]
       
       
       
                         Application Parameter File
       
       
      This file contains the basic settings needed to describe an application
      that either sends or receives a message. 
       
      **Note that the fields pertaining to VISTA HL7 version 1.5 have been
        marked for removal from the system.
       
      The default field separator is the up-caret ("^") and the default encoding
      7.     "Report" Option Fixed. The HL7 option, "Report" has been fixed to
      characters are "~|\&." Developers are not required to use these defaults.
      The preferred characters for the sake of message readability is the
      vertical bar ("|") as a field separator and "~^\&" as the encoding
      characters. Note that the "^"-character cannot be placed first in the list
      due to VA Fileman limitations.
       
      .01       NAME (RFX), [0;1]
      2         ACTIVE/INACTIVE (S), [0;2]
      3         FACILITY NAME (F), [0;3]
      4         MAIL GROUP (P3.8'), [0;4]
       
      properly display non-TCP status codes and errors. The option has been
      5         *HL7 SEGMENT (Multiple-771.05), [SEG;0]
                .01  HL7 SEGMENT (MRP771.3'), [0;1]
                2    FIELDS USED IN THIS SEGMENT (RF), [F;1]
      6         *HL7 MESSAGE (Multiple-771.06), [MSG;0]
                .01  HL7 MESSAGE (MRP771.2'), [0;1]
                1    PROCESSING ROUTINE (RF), [R;E1,17]
      7         COUNTRY CODE (P779.004'), [0;7]
      100       HL7 FIELD SEPARATOR (F), [FS;E1,2]
      101       HL7 ENCODING CHARACTERS (F), [EC;E1,4]
       
      renamed to, "Link Error/Status Report (non-TCP)."
       
                              Logical Links
       
      The Logical Link File (870) and the HL LOWER LEVEL PROTOCOL PARAMETERS
      file (869.2) have been merged into 870. The pointer from 870 to 869.2 has
      been changed to point to file 869.1 (HL LOWER LEVEL PROTOCOL TYPE). Users
      may now define parameters for multiple LLP's under the same Logical Link
      definition and simply change the "type" pointer as needed. A number of
      fields in 869.2 have been removed since the standard does not allow the
      settings to be altered. Since there has always been a 1:1 correspondence
       
      of Logical Links to LLP Parameters, users should be able to safely remove
      file 869.2 after installing this patch.
       
           Properly Defined VISTA-to-VISTA Interface (Before HL*1.6*57)
       
      The following is an example of a PROPERLY defined point-to-point interface
      between two VISTA Systems. In this example, the Sending System initiates
      an ADT message to the Receiving System and expects an Acknowledgement.
       
      4.1    Event Point Protocol Stored on Sending System 
      8.     Same-System Batch Messages. It has not been possible to exchange
      (Interface Workbench View):
      (1) JC ADT SERVER
          Text: Test tcp links
       Package:
         Message Type Rcvd: ADT                      Accept Acknowledgement: AL
           Event Type Rcvd: A01                 Application Acknowledgement: NE
                  Priority: <DEFAULT>
             Processing ID: DEBUG
                Version ID: 2.3
              Entry Action: <NONE>
      batch messages between applications running on the same system. This has
               Exit Action: <NONE>
       Process ACK Routine: Q
       Subscribers: JC ADT RECV          
       
      (VA FileMan View):
        NAME: JC ADT SERVER                    ITEM TEXT: Test tcp links
        TYPE: event driver                    CREATOR: CLEMENS,JOHN
        ITEM: JC ADT RECV
        TIMESTAMP: 56930,57258             
        SERVER APPLICATION: JC ADT SERVER
      been corrected.
        770.3 MESSAGE TYPE RECEIVED: ADT            
        770.4 EVENT TYPE: A01
        PROCESSING ID: DEBUG                 
        ACCEPT ACK CODE: AL
        APPLICATION ACK TYPE: NE             
        VERSION ID: 2.3
        GENERATE/PROCESS ACK ROUTINE: Q
       
                 Subscriber Protocol Stored on Sending System
       
       
      (Interface Workbench View):
      (1) JC ADT RECV
          Text: TEST SUBSCRIBER USING TCP LINK
       Package:
          Message Type Rcvd: ACK                 Sending Facility Required: NO
          Message Type Sent: ADT               Receiving Facility Required: NO
       Event Type Rcvd/Sent: A01             Date/Time of Message Required: YES
                   Priority: IMMEDIATE                   Security Required:
              Processing ID: DEBUG                            Logical Link:
                 Version ID: 2.3
      9.     Message Header Enhancements to Improve Security. Message headers
              Routing Logic: <NONE>
               Entry Action: <NONE>
                Exit Action: <NONE>
            Process Routine: D REC^JCHL7TST 
       
      (VA Fileman View): 
      NAME: JC ADT RECV
        ITEM TEXT: TEST SUBSCRIBER USING TCP LINK
        DISABLE: YES                          
        TYPE: subscriber
      have been enhanced to improve security. It is now possible to identify the
        CREATOR: CLEMENS,JOHN                 
        TIMESTAMP: 56930,56581
        CLIENT (SUBSCRIBER): JC TEST RECV     
        770.3 MESSAGE TYPE RECEIVED: ACK
        770.4 EVENT TYPE: A01                       
        PRIORITY: IMMEDIATE
        PROCESSING ID: DEBUG                  
        VERSION ID: 2.3
        770.11 MESSAGE TYPE GENERATED: ADT           
        GENERATE/PROCESS ROUTINE: D REC^JCHL7TST
      source of a message and route (deferred) acknowledgements based entirely
        SENDING FACILITY REQUIRED?: NO        RECEIVING FACILITY REQUIRED?: NO
        DATE/TIME OF MESSAGE REQUIRED?: YES       
       
       
              Event Point Protocol Stored on the Receiving System
       
      On the receiving system, the event point protocol is set up the same as on
      the sending system, however, the subscriber protocol must be set up
      differently (see below).
       
      1.     Exportable Interface Definitions. Class I Interface definitions are
      on header information. When enabled, the facility id field contains the
       
                Subscriber Protocol Stored on the Receiving System
       
      (VA Fileman View):
      NAME: JC ADT RECV
        ITEM TEXT: TEST SUBSCRIBER USING TCP LINK
        DISABLE: YES                          
        TYPE: subscriber
        CREATOR: CLEMENS,JOHN                 
        TIMESTAMP: 56930,56581
      source domain and destination domain as well as the Institution Number.
        CLIENT (SUBSCRIBER): JC ADT RECV     
        770.3 MESSAGE TYPE RECEIVED: ADT
        770.4 EVENT TYPE: A01                       
        PRIORITY: IMMEDIATE
        PROCESSING ID: DEBUG                  
        VERSION ID: 2.3
        770.11 MESSAGE TYPE GENERATED: ACK           
        GENERATE/PROCESS ROUTINE: D REC^JCHL7TST
        SENDING FACILITY REQUIRED?: NO        RECEIVING FACILITY REQUIRED?: NO
        DATE/TIME OF MESSAGE REQUIRED?: YES       
      Facility ID follows the HL7 Version 2.3 format, INSTITUTION
       
      Notice that the data for 770.3 and 770.11 must be reversed in order for
      HL7 to generate an ACK with the proper message type (ACK~A01) defined in
      the header.
       
      If the receiving system is capable of initiating the same transaction to
      the sending system in this example, a new set of protocols and unique
      sending and receiving application definitions must be supplied.
       
            Properly Defined VISTA-to-VISTA Interface (After HL*1.6*57)
      NUMBER_cs_DOMAIN_NAME_cs_"DNS." For improved security, it is now possible
       
      After Patch 57 is installed, you will see the following differences:
       
      On the sending system, field 770.3 and 770.4 of the EVENT POINT PROTOCOL
      are used to generate the header of the initial message. 
       
      Important consequence: The same setup can be exported to the receiving
      system because field 770.11 is correctly defined as "ACK" before and after
      the installation of patch 57 and field 770.11 is used to generate the
      response. If an ack is not required (as is currently the case for many
      to validate a source domain against entries in the logical link file. When
      CIRN definitions) for a given interface the subscriber configuration is of
      no consequence. 
       
      Therefore:
       
      1.     No conversion of properly defined interfaces (see above) is
      necessary.
       
      2.     If the receiving system needs to initiate the same transaction as
      well as receive it, the same two protocols can be used for both cases.
      valid domain information is present in the message header, the HL7 package
      Note that some interface setups may be improperly defined, but work anyway
      because of unusual circumstances. All interfaces currently in production
      should be reviewed based on this document.
       
      To assist with this, an "interface debugger" routine (^HLERCHK) has been
      supplied with patch 57 to examine one or all interfaces.
      Use this as a general tool for interface troubleshooting after
      installing the patch. It examines each HL7 Event Driver Protocol,
      Subscriber Protocols, and Application Definitions and generates a report
      of potential problems. It can be used with pre-Patch 57 setups as a guide
       
      for converting an interface to post-57 format. However, if it reports
      issues with a pre-57 setup, this should not be interpreted as an
      indication that the interface is not set up correctly.
       
       
            Event Point Protocol (for both Sending and Receiving System)
       
      NAME: JC ADT SERVER                     TYPE: event driver
        CREATOR: CLEMENS,JOHN
       DESCRIPTION:   Testing message transmissions 
      (1) attempts to resolve the domain to the corresponding logical link and
              SENDING APPLICATION: JC NXT SEND
        770.3 TRANSACTION MESSAGE TYPE: ADT         
        770.4 EVENT TYPE: A01
              PROCESSING ID: PRODUCTION             
              ACCEPT ACK CODE: AL
              VERSION ID: 2.2                       
              PROCESSING ROUTINE: Q
              RESPONSE PROCESSING ROUTINE: Q        
              SENDING FACILITY REQUIRED?: YES
              RECEIVING FACILITY REQUIRED?: NO
       
              SUBSCRIBERS: JC ADT RECV
       
          Subscriber Protocol (for both Sending and Receiving System)
       
      NAME: JC ADT RECV                       TYPE: subscriber
        CREATOR: CLEMENS,JOHN                 
              RECEIVING APPLICATION: JC KRN REC
        770.3 TRANSACTION MESSAGE TYPE: ADT         
        770.4 EVENT TYPE: A01
              PROCESSING ID: PRODUCTION
      (2) uses this information as the return path for responses in place of
              VERSION ID: 2.2                       
        770.11 RESPONSE MESSAGE TYPE: ACK
              PROCESSING ROUTINE: Q                 
              SENDING FACILITY REQUIRED?: NO
              RECEIVING FACILITY REQUIRED?: NO
      now exportable to all VISTA systems with little or no modification at the
      what may be defined in the Protocol file, Logical Link field.
       
      10.    Message Header Enhancements Facilitate Message Broker Integration.
      Enhancements to message header also facilitate the integration of Message
      Brokers into our Enterprise Application Integration strategy. In a future
      enhancement, it will be possible to query a DNS for current IP
      information. Note that any data that currently exists in the HL7
      Application Parameter file (771), Facility ID field, overrides this
      enhancement. Data for the 'default' Sending Facility ID (if required and
      no Application Parameter is defined) is derived from the HL7 Communication
      site. 
      Server Parameter file and edited using the option, Edit Site Parameters.
      Data for the Receiving Facility ID field is derived from the HL7 Logical
      Link File (870).
       
      11.    Processing ID Field Checking. Another improved security feature
      includes a check of the processing id field against the protocol
      definition or the site parameter file. On the receiving system, a mismatch
      between the message and the local definition results in an error. This can
      prevent test or debug messages from being processed in production
      accounts, and vice versa. 
       
       
      12.    Startup and Shutdown Enhancements. A new option has been created,
      "Stop All Logical Links And Filers". The "Restart All Links And Filers"
      option has also been fixed; it was shutting down all links, and then
      restarting only those links with AUTOSTART ENABLED. Now only AUTOSTART
      links are shut down and restarted.
       
      13.    Interface Workbench Replacement. The former HL7 option, "Interface
      Workbench," has been replaced. Due to the HL7 package's underlying
      architecture, it is relatively unintuitive to use and has been a problem
      2.     Reduction in Interface Development, Testing and Activation Time.
      to maintain. The new user interface also eliminates 21 routines and 62
      protocols.
       
      14.    Message Synchronization Over TCP. When a connection is broken it is
      possible for subsequent transactions to get out of synch. A fix is
      provided to assist with re-synchronizing the two systems. The following
      changes were added:
       
      (1) A new field has been added to the HL LOGICAL LINK file, #870.  When a TCP
       client exceeds the parameter value for the maximum number of
      
    • 60 SEQ #50
      DATE APPLIED:   2000-04-05 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch 
      with HL*1.6*39. If this is the case, it is important to insure that the
      links on both the sending and receiving systems are properly configured
      and enabled.
       
      If there is no routing logic defined on the subscriber protocol, Vista HL7
      will assume that the link defined on the subscriber protocol is the
      correct return path and Mailman will not be queried.
       
      2. Fixes a corrupted node found on the logical link, LR NCH-L which
      prevented patch HL*1.6*57 from converting this link.
      1. Resolves an issue with how to address responses to messages
       
       
       The following routines are included in this patch.  The second line of
      each of these routines now looks like:
        ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
       
       CHECK^XTSUMBLD results: 
         
       Routine Name   Before Patch    After Patch     Patch List 
       ============   ============    ===========     ========== 
      arriving over a Mailman-type Logical Link. 
       HLTP01         5262489         5578885         **2,25,34,47,60**
       HLPAT60        **NEW**         805414
       
       
      Installation Instructions: 
      ==========================
        1.  Users are allowed to be on the system during the installation.  
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
       
       
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
       
        3.  Shutdown all Logical Links and incoming and outgoing filers, and
            the Link Manager. Use the options:
       
             Shut Down All Logical Links
             Stop all incoming filers
             Stop all outgoing filers
             TCP/IP Link Manager Start/Stop
      If ROUTING LOGIC is defined, the response will be dynamically addressed
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
            option will load the KIDS package onto your system.  
       
        5.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
            options: 
       
               2 Verify Checksums in Transport Global 
      using the SOURCE DOMAIN provided by querying Mailman. In some cases this
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*60
                                 =========
       
              Answer 'YES' to 'Want KIDS to Rebuild Menu Trees upon Completion
              of Install?'.
       
      could result in a response being returned over a logical link that is
              Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.
        
              Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
              and Protocols?'.  
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the 
            'Restart/Start All Links and Filers' option.  
       
            For DSM sites ONLY, if you previously disabled an HL7 UCX Service
            for this installation, you may now enable it.
      different from the one the message arrived on. Specifically, the source
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
       
        8.  Start Link Manager using the option: "TCP/IP
              Link Manager Start/Stop."
      domain will resolve to one of the VA-namespaced logical links exported
      
    • 58 SEQ #51
      DATE APPLIED:   2000-04-17 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch addresses the following issues:
       
      Routine Modifications:
      ======================
      The following routines are included in this patch.  The second line of
      these routines now look like:
        
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
       
      CHECK^XTSUMBLD results: 
         
         
       Routine Name   Before Patch    After Patch     Patch List 
       ============   ============    ===========     ==========
       HLCS2          10072062        10270936        14,40,43,49,57,58
       HLCSTCP         5152314         5155167        19,43,49,57,58
       HLCSUTL         5134775         6479348        2,19,58
       HLMA            5502295         6284735        19,43,58
       HLMA2           7268935         7530649        19,43,57,58
       HLSUB           5277110         5501510        14,57,58
       HLTP3          14050232        14451393        19,43,57,58  
       HLTP31          1680845         1651062        57,58
      1. ISB-1299-31632, AUS-1299-N1595: Errors when using HL7 Ping option. After
       
      Installation Instructions:
      ==========================
        1.  Users are allowed to be on the system during the installation.
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
       
        3.  Use the option 'Stop All Messaging Background Processes' to disable
         error, ping doesn't work for any site.
            all links and filers.
       
            For DSM sites ONLY, if you have an HL7 UCX Service associated
            with the account(uci/directory) where you are installing this patch,
            please disable this service.
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
       
        5.  The patch has now been loaded into a Transport global on your
      2. DET-1199-41731:  Undefined error when transmitting HL7 messages.
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
       
               2 Verify Checksums in Transport Global
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*58
      3. TAM-1199-32092:  The option HL TASK RESTART, start wrong number of
                                 =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the
            'Restart All Links and Filers' option.
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
       
      ------------------------------------------------------------------------------
         outbound filers.
      New Public Functions (only for TCP messages)
       
         $$MSGLINE(msgid)
           return the number of lines in a message header and text
            input: msgid = message id
           output:  return number of lines
       
         $$MSG^HLCSUTL(msgid, ref)
           return the message header and text in the given reference
            input: msgid = message id
      4. Support for CPRS Remote Patient Data View project.
                     ref = closed local or global reference to place message
           output:  return 1 for success and 0 if message doesn't exist
           The message is returned with blank lines between each line.
           example:
       
      ref(1)=MSH^~|\&^VOICERAD^^RADIOLOGY^^20000110145151-0800^^ORU~R01^1231^T^2.2
      ref(2)=
      ref(3)=PID^^^100~10~M11^^JONES~JOHN~J^^19421112^M^^^^^^^^^^123456789
      ref(4)=
      ref(5)=OBR^^^^7089898.8543-1~043091-66~L^^^199104301200^"^"^^^^^"^^3232~HARR
      5. Cleans up application variables between inbound transactions.
      IS~JACK^^^^MEDICINE^^199104301010
      ref(6)=
      ref(7)=OBX^^TX^I~IMPRESSION~L^^HEART NORMAL SIZE
      ref(8)=
      ref(9)=OBX^^ST^D~DIAGNOSTIC CODE~L^^NORMAL
      ref(10)=
      ref(11)=OBX^^TX^R~REPORT~L^^Heart appears to be of normal size.
      ref(12)=
      ref(13)=OBX^^TX^R~REPORT~L^^No infiltrate or abnormal mass noted.
      ref(14)=
      
    • 63 SEQ #52
      DATE APPLIED:   2000-05-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch introduces DNS support for Vista HL7. In order to conduct HL7
      made to the locally specified Domain Name Server (found in the Kernel Site
               Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.
         
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
               and Protocols?'.  
        
         6.  Startup all Logical Links and incoming and outgoing filers. Use the
       
        
               Filer and Link Management Options ->
                   RA     Restart/Start All Links and Filers
      Parameters) to retrieve the current IP address. This feature was
               (Note that links that do not have "autostart" enabled will need
                to be restarted manually)
          
             For DSM sites ONLY, if you previously disabled an HL7 UCX Service
             for this installation, you may now enable it.
        
         7.  DSM Sites: Rebuild your mapped set if necessary.
        
         8.  Start Link Manager using the option: "TCP/IP
               Link Manager Start/Stop."
      introduced in Kernel patch XU*8*142. One or more IP addresses may be
      registered on the DNS systems. The DNS was initially seeded with IP
      information supplied by HL*1.6*39 and any subsequent changes made to date
      to the VA* and MPI logical links. These IP addresses are associated
      specifically with the service "HL7" on the DNS and the port 5000. The port
      number is currently fixed for HL7 and should not be changed. If only one
      IP address is returned, it will be stored in the site's local Logical Link
      file and used for subsequent connections. If more than one IP is returned,
      message exchange between sites using TCP, the TCP/IP address of each site
      each address will be tried in sequence until a successful connection is
      made. The successful IP address will then be stored and used until the
      next connection attempt that fails.
        
      Queries to the DNS will work only if the Logical Link (file 870) points to
      the correct Domain (file 4.2). Review the link definitions paying
      particular attention to those links in your VISN and verify that the
      Domain field is defined correctly.
        
      The Logical Link that represents your site should be configured as a
      running an HL7 service must be known by all other sites. If the address is
      "multithreaded listener" to receive INBOUND connection requests. The IP
      address and port for this listener is known by all other sites and
      referenced by them to establish a connection. Changing the IP address will
      prevent sites from establishing a connection. Therefore, if you wish to
      establish a new IP address, your VA DNS must be updated in advance of the
      change. It must contain an entry in the format, HL7.yoursite.domain.ext,
      and your new TCP/IP address. For example, DNS will contain an entry for
      Bay Pines VA looking like, "HL7.BAY-PINES.DOMAIN.EXT." This entry will
      return a TCP/IP address of 152.130.80.5. 
       
      changed, such as from "152.x.x.x" to "10.x.x.x," or when the HL7 service
      Please note that the HL7 development team is not involved with maintenance
      of the VA's DNS systems. Questions should be refered to your local or
      VISN-level DNS administrator, or via MS Exchange to the group, "VHA CIO
      DNS ADMIN."
        
      Following the installation of this patch you should enable your TCP/IP
      listener for inbound HL7 connections. Detailed instructions for this may
      be found in the HL7 Document, "Vista HL7 Site Manager and Developer
      Manual" released as HL*1.6*56. Here, you will find information for both
      Cache and for configuring UCX/TCP services under the VMS operating system.
      is moved to a different computer, or when multiple computers are able to
        
      The following routines are included in this patch.  The second line of
      each of these routines now looks like:
        
         ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
        
        CHECK^XTSUMBLD results: 
          
        Routine Name   Before Patch    After Patch     Patch List 
        ============   ============    ===========     ========== 
      support HL7 services at a single domain, other sites can use DNS to
        HLCSTCP2       10328595        11299763        **19,43,49,57,63**
        HLMA           6284735         7929932         **19,43,58,63**
        
       List of preceding patches: 57, 58
       Sites should use CHECK^XTSUMBLD to verify checksums.
        
       Installation Instructions: 
       ==========================
         1.  Users are allowed to be on the system during the installation.  
        
      "discover" this information without interruption in message exchange.
         2.  DSM SITES: Review your mapped set.  If any of the routines listed
             in the Routine Summary section are mapped, they should be removed
             from the mapped set at this time.
        
         3.  Shutdown all Logical Links and incoming and outgoing filers, and
             the Link Manager. Use the options:
        
               Filer and Link Management Options -> 
                   SA     Stop All Messaging Background Processes
                   LM     TCP/IP Link Manager Start/Stop
        
        
         4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
             option will load the KIDS package onto your system.  
        
         5.  The patch has now been loaded into a Transport global on your 
             system. You now need to use KIDS to install the Transport global.  
             On the KIDS menu, under the 'Installation' menu, use the following 
             options: 
        
                2 Verify Checksums in Transport Global 
      When a connection attempt over a TCP Logical Link fails, a call will be
                3 Print Transport Global 
                4 Compare Transport Global to Current System 
                5 Backup a Transport Global 
                6 Install Package(s) 
                    INSTALL NAME: HL*1.6*63
                                  =========
        
               Answer 'NO' to 'Want KIDS to Rebuild Menu Trees upon Completion
               of Install?'.
        
      
    • 61 SEQ #53
      DATE APPLIED:   2000-05-25 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch solves the following problems:
       
       1. Fayetteville
       2. Martinsburg
       
       
      Routine Summary:
      ================
      The following is a list of the routines included in this patch.  The
      second line of each of these routines now looks like:
       
       
           <tab>;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;Oct 13, 1995
       
       
      Checksums:
      ==========
       
        Routine Name    Checksum Before    Checksum After       Patch List
        ------------    ---------------    --------------    ------------------
          HLCSQUE           4308358           4338251              14,61
          HLCSREQ           1749378           1790153               61
       1. NOIS MWV-1297-20006: Requeuer screen didn't show the correct
       
       
          From CHECK^XTSUMBLD 
       
       
      Installation Instructions:
      ==========================
        1.  Users are allowed to be on the system during the installation.
        2.  Stop all the Logical links, incoming and outgoing filers.
        3.  DSM SITES: Review your mapped set.  If any of the routines listed in
          information in columns "Queue Size" and "Pending."
            the Routine Summary section are mapped, they should be removed from
            the mapped set at this time.
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
            option will load the KIDS package onto your system.  
        5.  The patch has now been loaded into a Transport global on your
            system. You now need to use KIDS to install the Transport global.
            On the KIDS menu, under the 'Installation' menu, use the following
            options:
       
               Verify Checksums in Transport Global
       2. Fixes the DICN-Error nodes problems for "IN" queue of HL LOGICAL LINK
               Print Transport Global 
               Compare Transport Global to Current System 
               Backup a Transport Global
               Install Package(s) 
               INSTALL NAME: HL*1.6*61
                             =========
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
        6.  DSM Sites: Rebuild your mapped set if necessary.
        7.  Restart all the Logical links, incoming and outgoing filers, which
          file(#870).
            have been stopped in step #2.
       
       
      Test sites :
      
    • 17 SEQ #10
      DATE APPLIED:   1996-11-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The ^HLCS global is reported to be growing rapidly and uncontrollably.
      call to $$DT^XLFDT.
      -The subject field of the message has been modified slightly. The sending
      facility now derives the site name from the ^VASITE call.
      -An effort has been made to optimize the transfer of message text from
      ^HLCS to ^XMB. It now uses the merge command to move text 100 lines at a
      time into ^XMB. Please note that any benefit derived from this change has
      not been proven yet.
       
      This patch contains the following routine:
       
      Mailman-type Logical Links are growing continuously because messages are
      ^HLCSMM
       
      The second line now looks like this:
                 ;;1.6;HEALTH LEVEL SEVEN;**17**;Oct 13, 1995
       
       
      Installation
       
      o      Disable all HL7 version 1.6 OUTBOUND FILERS and
      wait for the process' to disappear from the system status.
      never set to a 'done' status after it is handed off to Mailman.
       
         Select V1.6 OPTIONS Option: COMmunications Server
         1      Edit Communication Server parameters
         2      Manage incoming & outgoing filers ...
         3      Monitor incoming & outgoing filers
         4      Start LLP
         5      Stop LLP
         6      Systems Link Monitor
         7      Logical Link Queue Management ...
         8      Report
       
       
      Select Communications Server Option: 2
                                           =
         1      Start default number of incoming & outgoing filers
         2      Start an incoming filer
         3      Start an outgoing filer
         4      Stop all incoming filers
         5      Stop all outgoing filers
         6      Stop an incoming filer
         7      Stop an outgoing filer
      This patch corrects the problem of uncontrolled growth of file 870.
       
      Select Manage incoming & outgoing filers Option: 5
                                                       =
       
      Use the option, SYSTEMS LINK MONITOR to check the status of messages being
      processed out of your active Logical Links. It will look SIMILAR to this:
       
                      MESSAGES  MESSAGES   MESSAGES  MESSAGES  DEVICE  
           NODE       RECEIVED  PROCESSED  TO SEND   SENT      ON-LINE  STATE   
      AMB-CARE        0         0          1         1            Y     OUT QUEUE
       
       
      Notice that MESSAGES TO SEND and MESSAGES SENT are equal. As long as the
      filers are disabled, no new messages will be queued. It is now safe to
      CLEAR THE QUEUE OF ALL ENTRIES.
       
      Select the option LOGICAL LINK QUEUE MANAGEMENT, then
      select CLEAR A QUEUE OF ALL ENTRIES. Use this option to clear out all of
      your 'Mailman' type links.
       
      Now disable the logical links you have just cleared and prepare to install
      Further, it corrects the following miscellaneous problems:
      this patch. Use the option, STOP LLP to shut down the links.
       
      o AXP sites should check and remove HL* from their map sets.
             (Mapping of HL7 1.6 routines is not recommended at this time)
      o Users may remain on the system.
      o Load the KIDS BUILD FILE using the Packman option INSTALL/CHECK MESSAGE.
      o On the KIDS menu, under the 'Installation' menu, use the following 
             option: 
               Select Installation Option:  Install Package(s) 
                                           ==================
      -The date field of the zero node in ^XMB(3.9 is set incorrectly if the
               Select INSTALL NAME:  HL*1.6*17 
                                    =========
               Answer 'NO' to 'Want to DISABLE Schedule Options, Menu Options,
               and Protocols?' 
      o MSM Sites - Answer 'YES' to the question 'Want to MOVE routines to
             other CPUs?' Then enter the names of your other Compute and Print
             server(s).  
       
      After the KIDS installation has completed, remember to re-enable all
      previously disabled Logical Links (START LLP) and re-start your default
      background job has been running for several days. It is now updated with a
      number of INBOUND and OUTBOUND filers.
      
    • 59 SEQ #54
      DATE APPLIED:   2000-06-12 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      1. Introduces HL7 version 2.3.1 MESSAGE STRUCTURE components:
       
                    INSTALL NAME: HL*1.6*59
                                  =========
        
               Answer 'NO' to 'Want KIDS to Rebuild Menu Trees upon Completion
               of Install?'.
        
               Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.
         
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
               and Protocols?'.  
      3. In file 771, HL APPLICATION PARAMETER, the input transforms for FIELD
        
         6.  Startup all Logical Links and incoming and outgoing filers. Use the
       
        
               Filer and Link Management Options ->
                   RA     Restart/Start All Links and Filers
               (Note that links that do not have "autostart" enabled will need
                to be restarted manually)
          
             For DSM sites ONLY, if you previously disabled an HL7 UCX Service
         SEPARATOR and ENCODING CHARACTERS have been modified to prevent reuse
             for this installation, you may now enable it.
        
         7.  DSM Sites: Rebuild your mapped set if necessary.
        
         8.  Start Link Manager using the option: "TCP/IP
               Link Manager Start/Stop."
         of the field separator in the encoding characters. Each of the
         characters defined must be unique.
       
      4. HL*1.6*57 introduced a new menu structure. However, the old, obsolete
         menus were not removed. This patch will remove them.
       
      5. Fixes a problem with STUB records left behind in file 870 (Logical
              -Introduces a new file (#779.005) to hold the new HL7 MESSAGE
         Link) resulting in freezing of links and the System Link Monitor as
         well as causing queues to grow until disk space is used up.
       
      NOTE: Some sites may have a considerable number of messages needing to be
      purged from file 870. Please consider disabling journalling of ^HLCS() for
      about a week after installing this patch.
       
      6.  Changes the PROCESSING ID field of file 101 to be no longer required.
      Note that HL7 message headers are populated with information for
      'TRAINING' or 'PRODUCTION' taken from the HL7 site parameters. Use the
               STRUCTURE CODES.
      option, SITE PARAMETER EDIT, to verify that your production account is
      identified as such and your test/training account is identified as
      'TRAINING.' The event driver protocol PROCESSING ID field is now used only
      for DEBUG mode. Debug mode will override your site parameter setting. Make
      sure the protocol is set to 'debug' on both the sending and receiving
      system.
       
      7. Corrects a problem with creating new subscriptions when a user edits
      the zero node of file 774.
       
              -Adds a new field, MESSAGE STRUCTURE (#770.5), to the Protocol
      This patch resolves the following NOIS calls:
       
              AMA-0300-70683
              ISD-0300-71919
              HOU-0400-71933
       
      The following routines are included in this patch.  The second line of
      each of these routines now looks like:
        
         ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
               file. When defined, the MESSAGE STRUCTURE will be added to the
        
        CHECK^XTSUMBLD results: 
          
        Routine Name  Before Patch    After Patch     Patch List 
        ============  ============    ===========     ========== 
        HLCSHDR       7364841         7637619         **37,19,57,59**
        HLCSHDR1      7750238         8586633         **19,57,59**
        HLCSQUE       4338251         4440270         **14,61,59**
        HLCSQUE1      1150239         1371156         **14,59**
        HLFNC2        5397412         5365297         **2,26,57,59**
               version 2.3.1 message header.
        HLTP4         7805100         7964901         **19,57,59**
        HLTPCK1A      14402537        14751742        **2,25,34,57,59**
        HLTPCK2A      15262342        15611547        **19,57,59**
        HLUTIL2       5387464         5486507         **19,43,57,59**
        HLTPCK1       4288888         4452787         **8,36,59**
        HLTPCK2       3804314         3962788         **19,59**
        HLTP3         14451393        14649677        **19,43,57,58,59**
        HLSUB         5501510         5552075         **14,57,58,59**
       
       List of preceding patches: 14, 36, 57, 58, 61
       
       Sites should use CHECK^XTSUMBLD to verify checksums.
        
       Installation Instructions: 
       ==========================
         1.  Users are allowed to be on the system during the installation.  
        
         2.  DSM SITES: Review your mapped set.  If any of the routines listed
             in the Routine Summary section are mapped, they should be removed
             from the mapped set at this time.
        
      2. The message type of outbound messages was incorrectly stored in file
         3.  Shutdown all Logical Links and incoming and outgoing filers, and
             the Link Manager. Use the options:
        
               Filer and Link Management Options -> 
                   SA     Stop All Messaging Background Processes
                   LM     TCP/IP Link Manager Start/Stop
        
         4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
             option will load the KIDS package onto your system.  
        
         773. This has been fixed.
         5.  The patch has now been loaded into a Transport global on your 
             system. You now need to use KIDS to install the Transport global.  
             On the KIDS menu, under the 'Installation' menu, use the following 
             options: 
        
                2 Verify Checksums in Transport Global 
                3 Print Transport Global 
                4 Compare Transport Global to Current System 
                5 Backup a Transport Global 
                6 Install Package(s) 
      
    • 64 SEQ #55
      DATE APPLIED:   2000-06-12 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch addresses the following issues:
              $$MSGACT^HLUTIL  = outgoing message action, cancel or requeue
                      position or # of retries^# open failed^ack timeout
          
              status:
                       0 = message doesn't exist
                       1 = pending transmission
                     1.5 = being tranmitted
                     1.7 = awaiting response, # of retries
                       2 = awaiting application ack
                       3 = successfully completed
                       4 = error
              $$CHKLL^HLUTIL   = check setup of Logical Link
                       8 = being generated
                       9 = awaiting processing
      
      
      $$MSGACT^HLUTIL(X,HLIENACT)      ;outgoing message action
         input value:       X = message id
                     HLIENACT = 1-cancel; 2-requeue
      
        return value:       1 = action sucessful
                            0 = action failed
              $$FLD^HLCSUTL    = returns a field from a message segment
      
      
      $$CHKLL^HLUTIL(X)        ;check setup of Logical Link
         input value:   X = institution number or name
      
        return value:   1 = setup OK
                        0 = LL setup incorrect
      
      
      $$FLD^HLCSUTL(NODE,FLD)   ;This function will return the value for the field
      
         input value:   NODE = HLNODE from the HLNEXT call, passed by reference
                         FLD = number, field position in segment
                note:    HL("FS") must be defined
      
        return value:  value for the field in this segment
      
      Installation Instructions: 
      ==========================
        1.  Users are allowed to be on the system during the installation.  
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
       1. Added new status, AWAITING RESPONSE, to the HL7 MESSAGE STATUS file.
       
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
       
        3.  Shutdown all Logical Links and incoming and outgoing filers, and
            the Link Manager. Use the options:
       
              Filer and Link Management Options -> 
                  SA     Stop All Messaging Background Processes
                  LM     TCP/IP Link Manager Start/Stop
       2. New parameter, HL("ACKTIME"), will reset the Acknowledgement Timeout,
      
            For DSM sites ONLY, disabled all HL7 UCX Services 
            for this installation.
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
            option will load the KIDS package onto your system.  
       
        5.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
          for the one message. This parameter can be passed in GENERATE^HLMA or
            options: 
       
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*64
                                 =========
        
          DIRECT^HLMA APIs.
              Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.
        
              Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
              and Protocols?'.  
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the 
       
              Filer and Link Management Options ->
                  RA     Restart/Start All Links and Filers
              (Note that links that do not have "autostart" enabled will need to
       3. Retransmission alerts are no longer generated.
              be restarted manually)
         
            For DSM sites ONLY, if you previously disabled an HL7 UCX Service
            for this installation, you may now enable it.
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
       
        8.  Start Link Manager using the option: "TCP/IP
              Link Manager Start/Stop."
      
       4. DEVNOTOPN errors will no longer be recorded.
      
      Routine Information:
      ====================
      The following routines are included in this patch.  The second line of each
      of these routines now looks like:
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;JUL 17,1995
      
                       Checksum
      Routine         Old         New            2nd Line
      ========     ========     ========     =====================     
       5. New APIs:
      HLCSAC        2497076      2564816     **43,64**
      HLCSTCP       5155167      5175308     **19,43,49,57,58,64**
      HLCSTCP1      4965932      5081718     **19,43,57,64**
      HLCSTCP2     11299763     11197019     **19,43,49,57,63,64**
      HLCSUTL       6479348      6969973     **2,19,58,64**
      HLMA2         7530649      7925412     **19,43,57,58,64**
      HLTF0         3173064      3232637     **12,19,64**
      HLUTIL        2643574      3175738     **36,19,57,64**
      
      List of preceding patches: 57, 58, 63
              $$MSGSTAT^HLUTIL = returns status of a message
      Sites should use CHECK^XTSUMBLD to verify checksums.
      
      
      Documentation:
      ==============
      
      $$MSGSTAT^HLUTIL(X)      ;message status
         input value:  X = message id
      
        return value: status^status updated^error msg.^error type pointer^queue
      
    • 65 SEQ #56
      DATE APPLIED:   2000-07-11 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch addresses the following issues:
          Connect message. This is for the Remote Data View project.
      
      
      Installation Instructions: 
      ==========================
        1.  Users are allowed to be on the system during the installation.  
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
       
            the Routine Summary section are mapped, they should be removed from 
       1. Corrects problem creating an acknowledgement message MSH for a serial
            the mapped set at this time.  
       
        3.  Shutdown all Logical Links and incoming and outgoing filers, and
            the Link Manager. Use the options:
       
              Filer and Link Management Options -> 
                  SA     Stop All Messaging Background Processes
                  LM     TCP/IP Link Manager Start/Stop
      
            For DSM sites ONLY, disabled all HL7 UCX Services 
          connection.
            for this installation.
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
            option will load the KIDS package onto your system.  
       
        5.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
            options: 
       
       2. Enhancements to the System Link Monitor.  Display is now alphabetical
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*65
                                 =========
        
              Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.
      
          and views can also be defined. Use the 'Site Parameter Edit' option
              Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
      
        6.  Startup all Logical Links and incoming and outgoing filers. Use the 
       
              Filer and Link Management Options ->
                  RA     Restart/Start All Links and Filers
              (Note that links that do not have "autostart" enabled will need to
              be restarted manually)
         
          to create Link Monitor VIEWS.
            For DSM sites ONLY, if you previously disabled an HL7 UCX Service
            for this installation, you may now enable it.
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
       
        8.  Start Link Manager using the option: "TCP/IP
              Link Manager Start/Stop."
      
      
      Routine Information:
       3. New computed field in file 773, MESSAGE SIZE. This field counts the
      ====================
      The following routines are included in this patch.  The second line of each
      of these routines now looks like:
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;JUL 17,1995
      
                       Checksum
      Routine         Old         New            2nd Line
      ========     ========     ========     =====================     
      HLCSHDR       7637619      7573404     **37,19,57,59,65**
      HLCSMON      10703763     11036657     **34,40,48,49,65**
          number of characters in a message.  It can be used in FileMan reports.
      HLCSMON1      5535017      3592657     **15,40,49,65**
      HLCSUTL       6969973      7737730     **2,19,58,64,65**
      HLMA2         7925412      7999576     **19,43,57,58,64,65**
      
      List of preceding patches: 49, 59, 64
      Sites should use CHECK^XTSUMBLD to verify checksums.
       4. Update the INITIAL MESSAGE field in file 773 for a response to a Direct
      
    • 66 SEQ #57
      DATE APPLIED:   2000-10-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
           are added to HL7 date/time formats whenever time is included.
      Installation Instructions: 
      ==========================
        1.  Users are allowed to be on the system during the installation.  
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
       
        3.  Shutdown all Logical Links and incoming and outgoing filers, and
            the Link Manager. Use the options:
       
       
              Filer and Link Management Options -> 
                  SA     Stop All Messaging Background Processes
                  LM     TCP/IP Link Manager Start/Stop
       
            For DSM sites ONLY, disabled all HL7 UCX Services 
            for this installation.
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
            option will load the KIDS package onto your system.  
           Also, please install this patch prior to installing patch RG*1*4.
       
        5.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
            options: 
       
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
           This patch is needed by the CPRS Remote Data Views.
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*66
                                 =========
       
              Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.
       
              Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?'.
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the 
           If RG*1*4 is already installed, install this patch as soon
       
              Filer and Link Management Options ->
                  RA     Restart/Start All Links and Filers
              (Note that links that do not have "autostart" enabled will need to
              be restarted manually)
       
            For DSM sites ONLY, if you previously disabled an HL7 UCX Service
            for this installation, you may now enable it.
       
        7.  DSM Sites: Rebuild your mapped set if necessary.
           as posssible.
       
        8.  Start Link Manager using the option: "TCP/IP
              Link Manager Start/Stop."
       
           Future patch XM*7.1*51, which will change the domain names for
           all sites which have requested it, will not be released until all
           sites have installed HL*1.6*66.
       *** PLEASE NOTE THE FOLLOWING:  ***
       
        **********************************
       
      This patch addresses the following issues:
       1. ISA-0600-10916  Correct problem with HLDATE^HLFNC when midnight is
          used.
       2. CHS-0499-43088  Corrects a problem with Mailman Logical Links when
          mail group has no members. Updated to use new Mailman API's and send a
          message to the HL7 mail group.
       3. ISF-0600-61155  Prevents an UNDEFINED when the subscription control
       
          number is not passed into GET^HLSUB.
       4. ISB-0600-32294  Prevents the loss of the 'AC' cross reference
          on pending messages.
       5. WIM-0700-20527     PROBLEM ON SYSTEMS LINK MONITOR.  Patch HL*1.6*65
          introduced some new enhancements to the HL7 System Link Monitor.
          However, this patch also introduced a new bug that prevented users
          from backing up a screen when in 'Screened' mode.  This patch corrects
          this problem with the monitor.
       6. General variable cleanup in routine HLTP3 associated with Dynamic
          Addressing and Enhanced Headers.  This patch fixes the
           This patch requires patch XU*8.0*168 HL7 date fix.
          Invalid Message Control ID in MSA Segment that was encountered with
          patch RG*1*4 CPRS REMOTE DATA VIEWS.
       7. Related NOISes:
          ELP-0700-72334     Undefined Variable @ SF+14~HLTPCK2A
          LAS-0700-62279     MESSAGE ERROR FROM NEW ORLEANS
          BIR-0700-32233     Undefined Variable
          MUR-0800-30482     <UNDEF(ECODE)>SF+14^HLTPCK2A
          PRE-0800-60365     $ZE= <UNDEFINED>SF+14^HLTPCK2A
          This patch fixes the undefined variable at SF+14^HLTPCK2A.  This was
          first encountered after the staff at New Orleans VAMC changed their
           Also, this patch corrects the interpretation of midnight when
          domain entry to include the '.MED' in front of the '.DOMAIN.EXT' suffix.
          Afterwards, sites receiving CIRN/HL7 messages from New Orleans would
          encounter this error.  In addition, this patch changes the way that it
          performs a FileMan lookup of the Domain Name.  Previously, it was only
          based only on the .01/Name field.  After this patch is installed, the
          lookup process will work with either the Name or Synonym.
       8. Related NOISes:
          AUG-0800-32024     LINK HAS NEGATIVE NUMBERS
          AUG-0800-31661     HL7 INTERFACE NOT WORKING
          AUS-0800-N0079     Negative Numbers on Monitor
           converting FileMan to HL7 date/time formats and vice versa.
          ISB-0800-30179     Entries in the 'AC' x-ref but with a status of 3
          This patch fixes the problem where sites encountered negative
          numbers in the 'TO SEND' column of the HL7 System Link Monitor.
          These negative numbers were a result of the HL7 code inadvertently
          changing the status of messages to 'SUCCESSFULLY COMPLETED'
          in the wrong file.  Although the 'AC' cross-reference existed
          for these messages, the status of 'SUCCESSFULLY COMPLETED' prevented
          these message from being delivered.
          In addition, the use of $$REPROC^HLUTIL(IEN, routine) extrinsic
          function after this patch is installed, will update the
           In addition, the Vista HL7 Functions $$HLDATE^HLFNC(X,Y) and
          DATE/TIME PROCESSED field(#100) in the HL7 MESSAGE ADMINISTRATION
          file (#870).
       
      Routine Information:
      ====================
      The following routines are included in this patch.  The second line of
      each of these routines now looks like:
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;JUL 17,1995
       
                       Checksum
           $$FMDATE^HLFNC(X) now call the Kernel functions $$FMTHL7^XLFDT(X)
       Routine         Old         New            2nd Line
       ========     ========     ========     =====================     
       HLCSMM        2836421      2312930     **17,35,57,66**
       HLCSMON      11036657     11192960     **34,40,48,49,65,66**
       HLCSTCP2     11197019     11334736     **19,43,49,57,63,64,66**
       HLFNC         5785780      5669016     **38,42,51,66**
       HLMA          7929932      7962943     **19,43,58,63,66**
       HLSUB         5552075      5558527     **14,57,58,59,66**
       HLTP3        14649677     14792516     **19,43,57,58,59,66**
       HLTP31        1651062      1770560     **57,58,66**
           and $$HL7TFM^XLFDT(X) respectively.  Furthermore, ZULU offsets
       HLTPCK2A     15611547     16050022     **19,57,59,66**
       HLUTIL        3175738      3187029     **36,19,57,64,66**
       
       
       List of preceding patches: 51, 58, 59, 63, 64, 65
       Sites should use CHECK^XTSUMBLD to verify checksums.
       
      External patch dependency:  XU*8.0*168    HL7 date fix.
       
       
      
    • 67 SEQ #58
      DATE APPLIED:   2001-01-22 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
                * * * * * * * * * * * * * * * * * * *  * * * * * * * * * *
      Test Site: Milwaukee, WI; Puget Sound HCS; Grand Junction, CO
      5. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu to load the
         KIDS package into a Transport global on your system.  
      6. On the KIDS:Installation menu, use the following options to install the
         Transport Global:
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
       Select INSTALL NAME: HL*1.6*67     Loaded from Distribution  <date/time>
      When sending HL7 transactions to other VA sites over TCP links, Cache/NT
                            =========
       Install Questions for HL*1.6*67
      
       Want KIDS to INHIBIT LOGONS during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
      sites must send an initial HELO to overcome buffering issues.  However,
      
       DEVICE: HOME// <Do NOT queue it!>
                      ------------------
      7. Cache/NT sites: Once the patch is installed, review the list of 
      HL LOGICAL LINKs whose SAY HELO field was set to YES by the post-init, and
      make sure they were all links to VA sites, and that no TCP links to VA sites
      were left out.  (If the name started with 'VA' it was considered a VA site.)
      8. Startup all Logical Links and incoming and outgoing filers. Use the 
       
           Filer and Link Management Options ->
      the initial HELO is not part of the HL7 standard, and may cause a reject
               RA     Restart/Start All Links and Filers
         (Note: Links which do not have "autostart" enabled will need to
                be restarted manually)
         
      9. DSM Sites: If you previously disabled an HL7 UCX Service for this
         installation, you may now enable it.
      10. DSM Sites: Rebuild your mapped set if necessary.
      11. Start Link Manager using the option: "TCP/IP Link Manager Start/Stop."
      error when sent to a COTS system.
      
      This patch adds a new field, SAY HELO, to file 870, HL LOGICAL LINK,
      so that for every logical link, the Cache/NT site can decide whether or
      not to send the initial HELO.  The default will be NO, since it is not
      part of the HL7 standard.
                                         ATTENTION
      
      The form HL7 LOGICAL LINK has been updated to include this field.  Only
      Cache/NT sites should set it, since it does not apply to other sites,
      and will be ignored at other sites.
      
      At Cache/NT sites with patch HL*1.6*39 (which distributed VA Logical Link
      definitions) installed, the post-init will go through file 870,
      HL LOGICAL LINK, and for every TCP link to a VA site (if the name of the
      link starts with 'VA', OR if the link is 'MPIVA'), set SAY HELO to YES.
      It will show you which links it has set.  You should review the list and
              Read this patch.  If you are a Cache/NT site, you MIGHT have to
      manually correct any which shouldn't have been set, or set any that were
      missed.
      
      The post-init will NOT run at:
      - Cache/NT sites which have not installed patch HL*1.6*39.
      - non-Cache/NT sites.
      
      Here's the new field:
      
      STANDARD DATA DICTIONARY #870 -- HL LOGICAL LINK FILE
                                   PERFORM MANUAL EDITS!
      STORED IN ^HLCS(870,
      
      DATA        NAME                GLOBAL        DATA
      ELEMENT     TITLE               LOCATION      TYPE
      ---------------------------------------------------------------------------
      870,400.07  SAY HELO             400;7 SET
      
                                  'Y' FOR YES; 
                                  'N' FOR NO; 
                  LAST EDITED:    NOV 02, 2000 
                * * * * * * * * * * * * * * * * * * *  * * * * * * * * * *
                  HELP-PROMPT:    Send initial HELO for Cache/NT TCP links? 
                  DESCRIPTION:    This field is applicable only to Cache/NT sites
                                  with TCP links.  If you are not a Cache/NT
                                  site, or this is not a TCP link, this field 
                                  does not apply, AND will be ignored.  
      
                                  If this TCP link is for a VA site, answer YES.  
                                  If this TCP link is for a COTS system, answer
                                  NO.  This is the default.  
      
      
                TECHNICAL DESCR:  When sending HL7 transactions to other VA sites
                                  over TCP links, Cache/NT sites must send an
                                  initial HELO to overcome buffering issues. 
                                  However, the initial HELO is not part of the
                                  HL7 standard, and may cause a reject error when
                                  sent to a COTS system.  
      
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patch HL*1.6*66.
      ============================================================================
      Patch HL*1.6*67
      
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;JUL 17,1995
      
                   Before       After
      Name         Checksum     Checksum     Patch List
      ---------------------------------------------------------------------
      HLCSTCP2     11334736     11552851     19,43,49,57,63,64,66,67
      HLPAT67       * new *      2870677     67
      
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces the following new routine:
      HLPAT67 is a post-init and has no user-callable entry points.
      ============================================================================
      
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patch HL*1.6*66.
      1. Users may be on the system during the installation of this patch.
      NOIS: PUG-0800-52938
      2. DSM Sites: If any of these routines is mapped, disable mapping for the
         affected routine(s).
      3. Shutdown all Logical Links and incoming and outgoing filers, and
         the Link Manager. Use the options:
       
           Filer and Link Management Options -> 
               SA     Stop All Messaging Background Processes
               LM     TCP/IP Link Manager Start/Stop
      
      4. DSM sites: Disable all HL7 UCX Services for this installation.
      
    • 68 SEQ #59
      DATE APPLIED:   2001-01-22 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch HL*1.6*68
      
      1. Ignores domain closures and security key requirements, so that it will
      send to FOC-AUSTIN, even if that domain is closed or has a security key.
      
      2. Sites may again use the auto-startup feature for MailMan type Logical
      Links.  If DUZ is 0 or undefined, DUZ will be set to .5 (POSTMASTER), for
      the purpose of sending the messages.
      
      3. Error message has been improved.  If the message is not sent for some
      reason, the error message will clearly state the reason why.  Sites are
      
      reminded to ensure that the mail group which receives error messages is
      populated.  To do this:
      
      W $$PARAM^HLCS2.  Piece 8 should be the name of a mail group.  You should 
      be in that mail group.  This group receives error messages if there's any 
      problems in creating the HL7 MailMan messages.  The subject is
      "Error handing HL7 message off to Mailman".
      
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patch HL*1.6*66.
      NOIS: MIW-0900-41651
      ============================================================================
      
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;JUL 17,1995
      
                   Before       After
      Name         Checksum     Checksum     Patch List
      ---------------------------------------------------------------------
      HLCSMM        2312930      3644711     17,35,57,66,68
      Test Site: Milwaukee, WI
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces no new routines.
      ============================================================================
      
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patch HL*1.6*66.
      1. Users may be on the system during the installation of this patch.
      2. DSM Sites: If any of these routines is mapped, disable mapping for the
      This patch 'news' variables in routine ^HLCSMM so that they do not leak out
         affected routine(s).
      3. Shutdown all Logical Links and incoming and outgoing filers, and
         the Link Manager. Use the options:
       
           Filer and Link Management Options -> 
               SA     Stop All Messaging Background Processes
               LM     TCP/IP Link Manager Start/Stop
      
      4. DSM sites: Disable all HL7 UCX Services for this installation.
      5. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu to load the
      and cause problems.  ^HLCSMM uses MailMan to send HL7 messages for MailMan
         KIDS package into a Transport global on your system.  
      6. On the KIDS:Installation menu, use the following options to install the
         Transport Global:
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
       Select INSTALL NAME: HL*1.6*68     Loaded from Distribution  <date/time>
                            =========
      type Logical Links.
       Install Questions for HL*1.6*68
      
       Want KIDS to INHIBIT LOGONS during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
      
      
       DEVICE: HOME// <Do NOT queue it!>
                      ------------------
      7. Startup all Logical Links and incoming and outgoing filers. Use the 
       
           Filer and Link Management Options ->
               RA     Restart/Start All Links and Filers
         (Note: Links which do not have "autostart" enabled will need to
                be restarted manually)
         
      8. DSM Sites: If you previously disabled an HL7 UCX Service for this
      The following improvements are also made:
         installation, you may now enable it.
      9. DSM Sites: Rebuild your mapped set if necessary.
      10. Start Link Manager using the option: "TCP/IP Link Manager Start/Stop."
      
    • 73 SEQ #61
      DATE APPLIED:   2001-03-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch to the HLCSMON routine.
      
    • 72 SEQ #62
      DATE APPLIED:   2001-03-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Fix free-text stored instead of internal entry number problem.
      
    • 69 SEQ #63
      DATE APPLIED:   2001-04-05 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
       generated and sent to Forum.
                   INSTALL NAME: HL*1.6*69 
                                 =========
       
              Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.  
       
              Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
               and Protocols?'.  
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the 
       
       
              Filer and Link Management Options -> 
                  RA     Restart/Start All Links and Filers 
              (Note that links that do not have "autostart" enabled will need to 
              be restarted manually) 
       
            For DSM sites ONLY, if you previously disabled an HL7 UCX Service 
            for this installation, you may now enable it.  
       
        7.  DSM Sites: Rebuild your mapped set if necessary.  
       
       This problem was originally indentified in Milwaukee when the Dictaphone
        8.  Start Link Manager using the option: "TCP/IP 
              Link Manager Start/Stop." 
       application tried to execute a MPI/PD processing routine (EN^RGADT).
       
       Most recently, the problem appeared at the Birmingham VAMC.  Some user
       inactivated a Lab interface application which caused an endless loop
       creating application acks that were never received/processed because the
       VistA HL7 application was inactivated.
       
      This patch addresses the following issues:
       The problem lies in the CONT^HLTP3 subroutines, the HL("EIDS") variable,
       defining the subscribing protocol, is not defined.  The software sets the
       HL("EIDS") variable to HLEIDS.  The value of HLEIDS is not reliable, in
       most cases the variable has not been properly set/killed.
       
       In addition, the inbound filers were not locking the cross-reference
       ^HLMA("AC","I",... in order to flush to global cache buffers.
       
       In this case, the HL7 link receiving a message for an application
       kills the cross-reference(entry in the inbound tcp/ip queue),
       
       releases other locks, the inbound filers kicks in and grabs the lock at a
       different parent level ^HLMA(ien), checks for the existence of
       ^HLMA("AC","I",LLien,MSGien) and since no locking was performed on this
       cross-reference, this piece of code thinks this entry exists.  Hence, the
       inbound filers begin to process this message, finds
       variables left around from a previous message(MPI/PD or HL7 itself),
       invokes code that uses these variables to set other HL7 variables when
       these variables itself are not setup properly.  This in turn causes the
       code to call the MPI/PD application which in turn fires off exception
       messages to Forum.
       1.  ISH-1000-42883  wrong processing routine being executed for VistA HL7 apps
       
       These problems may be triggered by an inbound HL7 message that was not
       properly constructed in terms of the HL7 MSH segment.  The VistA HL7
       software needs from the MSH segment, the Sending/Receiving Application
       names, Message Type, Event Type and Version ID.
       The HL7 Protocol setups may also have triggered this problem if the data
       in the MSH segment of an inbound message does not match the interface
       definition setups.
       
       Therefore, sites will still need to correct problems with their local
       
       interfaces. This patch only prevents the wrong application from being
       executed.
       
      Routine Information:
      ====================
       The following routines are included in this patch.  The second line of each
       of these routines now looks like:
        ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
       
       CHECK^XTSUMBLD checksum results:
       2.  SDC-1100-60210  Problem with HL7/Radiology link
       
       Routine Name     Before Patch  After Patch    Patch List
       ============     ============  ===========    ====================
       HLTP3            14792516      15038079       19,43,57,58,59,66,69
       
       List of preceding patches: 66
       Sites should use CHECK^XTSUMBLD to verify checksums.
       
       
      Installation Instructions: 
       
      ==========================
        1.  Users are allowed to be on the system during the installation.  
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in 
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
       
        3.  Shutdown all Logical Links and incoming and outgoing filers, and 
            the Link Manager. Use the options: 
       
       The wrong processing routine is being executed (EN^RGADT)
              Filer and Link Management Options -> 
                  SA     Stop All Messaging Background Processes 
                  LM     TCP/IP Link Manager Start/Stop 
       
            For DSM sites ONLY, disabled all HL7 UCX Services 
            for this installation.  
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
            option will load the KIDS package onto your system.  
       
       for non-MPI/PD applications.  This causes a MPI/PD exception to be
        5.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
            options: 
       
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
      
    • 76 SEQ #64
      DATE APPLIED:   2001-08-15 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The test sites for Patch HL*1.6*76 are:
       
      an I/O problem will be encountered.  Patch HL*1.6*76 addresses
      these issues by passing back to the calling application information regarding
      any error it encounters.  Furthermore, it cleans up the cross reference
      it created and closes the device before returning to the calling application.
      In addition, the post-init routine HLPAT76 will find all incomplete messages
      that were affected by READ errors prior to this patch.  This post-init will
      set the status of these messages so that they do not affect other messages in
      the queue.
       
      Part 5 - After the Integrated Billing (IB) patch IB*2*150 was activated,
       
      many sites encountered several entries in their Lock Table.  This was a result
      of the direct connect locking ^HLMA global nodes and never releasing the locks.
      This IB patch utilizes an Integrated Billing Background Filer to send
      several HL7 messages.  To achieve this, this filer calls the direct connect
      API to send these messages.  However, each HL7 message sent adds two entries
      into the Lock Table causing some sites to fill up their Lock Table.
      This HL7 patch fixes this problem by having the direct connect API
      properly release the locks when it no longer needs them.
       
       
      This Patch Addresses the Following NOIS Calls:
      Routine Information:
      ====================
       
       The following routines are included in this patch.  The second line of each
       of these routines now looks like:
        ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;JUL 17,1995
       
                        Checksum
       Routine         Old       New      2nd Line
       HLCSTCP2     11552851   11428718    **19,43,49,57,63,64,66,67,76**
      ==============================================
       HLCSTCP3          new    1935770    **76**
       HLMA2         7999576    8028267    **19,43,57,58,64,65,76**
       HLPAT76           new    1888010    **76**
       
       List of preceding patches: 65, 67
       Sites should use CHECK^XTSUMBLD to verify checksums.
       
       This patch introduces the following new routines: HLCSTCP3 and HLPAT76.
       Routine HLPAT76 is a post-init and has no user-callable entry points.
       
       
      Installation Instructions: 
      ==========================
       
        1.  Users are allowed to be on the system during this installation.  
       
        2.  DSM SITES: Review your mapped set. If any of the routines listed in 
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
       
        3.  Use the VISTA HL7 Filer and Link Management options, listed below, to 
        1. ISH-0700-41306   Enhanced Message Header issue: 'AA' received before 'CA'
            shutdown (1) all Logical Links, (2) the incoming and outgoing filers, and 
            (3) the Link Manager. Use the options: 
       
              Filer and Link Management Options -> 
                  SA     Stop All Messaging Background Processes 
                  LM     TCP/IP Link Manager Start/Stop 
       
            DSM SITES ONLY: Disable all HL7 UCX Services for this installation.
       
        4.  Use the option INSTALL/CHECK MESSAGE located on the PackMan menu to load 
        2. BRX-0701-12759   VANJHL7 in error state
            the KIDS package onto your system.
       
        5.  Patch HL*1.6*76 has now been loaded into a Transport global on your 
            system. The next step is to use KIDS to install the Transport global. To 
            do this, follow the KIDS menu path to the Installation menu:
       
               KIDS  Kernel Installation & Distribution System
                  Installation
       
            On the Installation menu, use the following options: 
        3. BRX-0701-12760   Undefined error CHKMSG+6^HLCSTCP2
       
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*76 
                                 =========
       
               Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.  
        4. POR-0701-52464   problem with VANJH LINK
       
               Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
               and Protocols?'.  
       
        6.  Follow the HL7 menu path to the option Restart/Start All Links and Filers
            to startup all Logical Links and incoming and outgoing filers:
       
               Filer and Link Management Options -> 
                  RA  Restart/Start All Links and Filers 
              
        5. BHS-0701-12356   VABED Link
               NOTE: Links that do not have "Autostart" enabled will need to 
                     be restarted manually) 
       
            DSM SITES ONLY: If you previously disabled an HL7 UCX Service 
            for this installation, you may enable it now enable it.  
       
        7.  DSM SITES: Rebuild your mapped set if necessary.  
       
        8.  Start Link Manager using the option: TCP/IP Link Manager Start/Stop. 
      =======================================
        6. ERI-0701-22675   Possible run-away HL7 job on Sun 7/29/01
       
       
      This patch is composed of the following five parts:
      ===================================================
       
        1. Part 1 addresses out of order HL7 acknowledgements on Cache' 
           systems.  
        2. Part 2 addresses non-persistent TCP/IP client links, which are not 
           maintaining a connection during the retention period. 
       
        3. Part 3 addresses the near SACC routine size limit (10K) of the HL7 routine
           HLCSTCP2.
        4. Part 4 addresses direct connect handling network errors properly.
           Read errors encountered through the direct connect were affecting
           both the Institution File Redesign (IFR) clean-up and the activation 
           of Integrated Billing (IB).
        5. Part 5 addresses direct connect handling of M LOCKS.
       
       
      Part 1 - The out of order HL7 acknowledgements on Cache' systems are related
        1. White River Junction VAMC.
      to the inconsistent use of OPEN parameters between client
      and server (listener) processes.  These acknowledgements are communicating
      over a TCP/IP socket on Cache' systems.
       
      The VISTA HL7 package makes use of the following Kernel APIs
      to open a TCP/IP socket:
       
         1. CALL^%ZISTCP -- Used by the client.  This API uses STREAM mode.
         2. LISTEN^%ZISTCP -- Used by the single-threaded listener.  This API uses
            packet mode.
        2. Butler VAMC.
         3. LISTEN^%ZISTCPS -- Used by the multi-threaded listener.  This API uses
            packet mode.
       
      When initiated from Cache' to DSM systems, HL7 messages should look like this:
       
         Order     Cache'                                  DSM
         =====     ======                                  ===
           1       client sends message----------------> listener
           2       client <--------------------listener sends Commit ACK
           3       listener <------------------client sends Application Response
        3. Tuscaloosa VAMC.
           4       listener sends Commit ACK------------> client
       
      However, with the inconsistent parameters used by the Kernel
      APIs, listed above, the following HL7 message scenario occurs:
       
         Order     Cache'                                  DSM
         =====     ======                                  ===
           1       client sends message----------------> listener
           4       client <--------------------listener sends Commit ACK
           2       listener <------------------client sends Application Response
        4. Wilmington VAMC.
           3       listener sends Commit ACK------------> client
       
      Notice that the Commit ACK (Order #4) for the initial message (Order #1)
      arrives after the application response message (Order #2). This is happening
      because the client process is using stream mode (Kernel API CALL^%ZISTCP).
      Steam mode is causing the initial message to wait for the full timeout
      to expire on the READ before the client process actually sees
      what was just read.  Therefore, if the READ TIMEOUT is set to 30 seconds,
      the client will sit on the READ command for the entire 30 seconds
      while the listener process receives the application response
        5. San Francisco VAMC.
      as soon as it is available.
       
       
      Part 2 - The second part of this patch will help reduce the OPEN failure rate
      that may be related to rapid OPENS and CLOSES by maintaining the connection
      during the retention period.
       
      Part 3 - This patch creates the new HL7 routine HLCSTCP3 to accommodate
      the spillover in excess of 10K from HLCSTCP2.
       
        6. Loma Linda VAMC
      Part 4 - The Institution File Redesign (IFR) Patch XU*8*206 may encounter
      problems with the clean-up process if network problems are present.
      During the clean-up, IFR will download the Master Institution File from FORUM.
      This is done via an HL7 feature called "direct connect".  The VISTA HL7
      developers have discovered a problem when read errors are encountered
      across the wide area network when using the direct connect.
      Once this read error is encountered, it causes an error in the direct connect
      and the connection is dropped and the IFR clean-up encounters an error.
      When this happens, the direct connect does not clear the cross reference
      it created.  Subsequently, when the clean-up is restarted,
      
    • 21 SEQ #13
      DATE APPLIED:   1997-01-22 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch enhances the purge utility by supporting a 'vaporization date'
      for HL7 messages. See the patch module for details.
      
    • 80 SEQ #65
      DATE APPLIED:   2001-09-06 00:00:00
      APPLIED BY:   USER,ONE
    • 77 SEQ #66
      DATE APPLIED:   2001-09-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Test sites:    Grand Junction,  El Paso, San Francisco, Big Spring
      Billing patch was released.  (There was no problem with the Integrated
      Billing (IB) patch. But after the patch, IB used some parts of the
      HL7 package differently than before.) Some problems were fixed by
      HL*1.6*76, but problems remained.  After patch HL*1.6*76 was installed,
      READ and WRITE errors remained, but were more specific to Cache sites.
      This patch fixes the additional problems not fixed by HL*1.6*76.
       
      The two routines included in this patch are shown below, along with
      each routine's second line.
       
       
        Routine    Second Line
        =========  =========================================================
        HLCSTCP2   ;;1.6;HEALTH LEVEL SEVEN;**19,43,49,57,63,64,66,67,76,77
                   **;JUL 17,1995
        HLCSTCP3   ;;1.6;HEALTH LEVEL SEVEN;**76,77**;JUL 17, 1995
       
      The VA Kernel checksums for these routines (calculated using
      CHECK^XTSUMBLD) are listed below.
       
                      Checksum        Checksum
      NOIS:          ELP-0801-70936, GRJ-0801-51450, MAN-0701-12428,
        Routine Name  Before Patch    After Patch     Patch List
        ============  ============    ===========     =====================
        HLCSTCP2      11428718        12129232        **19,43,49,57,63,64,66,
                                                      67,76,77**
        HLCSTCP3       1935770         2092970        **19,57,59,72,80**
       
      Sites should use CHECK^XTSUMBLD to verify checksums after patch
      installation.
       
       Installation Instructions:
                     PRO-0801-11300
       ==========================
       
         NOTICE:  Do no proceed unless patch HL*1.6*76 has been installed.
       
         1.  Users are allowed to be on the system during the installation.
       
         2.  AXP/DSM SITES: Review your mapped routine set.  If any of the
             routines listed in the ROUTINE SUMMARY section are mapped, they
             should be removed from the mapped set at this time.
       
       
         3.  Shutdown all Logical Links, incoming and outgoing filers, and
             the Link Manager using the Filer and Link Management options
             listed below.
       
                Stop All Messaging Background Processes [HL STOP ALL]
                TCP/IP Link Manager Start/Stop [HL START/STOP LINK MANAGER]
       
            AXP/DSM SITES ONLY: Disable all HL7 UCX Services for this
            installation.
       
      Note:          This patch requires that KIDS build HL*1.6*76
         4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
             option will load the KIDS package onto your system.
       
         5.  This patch is now loaded into a transport global on your
             system. The next step is to use KIDS to install the Transport
             global. This is done using the 'Installation' menu's 'Install
             Package(s) [XPD INSTALL BUILD]' menu option. When using this
             menu option to install the patch build, you will be asked
             several questions.  The questions, and the answers you should
             supply, are shown below.
                     be installed.
       
             INSTALL NAME: <HL*1.6*77>
             Want KIDS to INHIBIT LOGONS during the install?  <NO>
             Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?  <NO>
       
         6.  Start up all Logical Links and incoming and outgoing filers using
             the Filer and Link Management Option's 'Restart/Start All Links
             and Filers [HL TASK RESTART]' menu option.
       
       
             (Note that links that do not have "autostart" enabled will need
             to be restarted manually.)
       
            AXP/DSM SITES ONLY: If you previously disabled an HL7 UCX Service
            for this installation, you may enable it now enable it.
       
         7.  AXP/DSM Sites:  After the patch has been installed, rebuild your
             map set, if necessary.
       
         8.  Start Link Manager using the 'TCP/IP Link Manager Start/Stop [HL
      Patch HL*1.6*76 fixed problems encountered when a recent Integrated
             START/STOP LINK MANAGER]' menu option.
      
    • 81 SEQ #67
      DATE APPLIED:   2001-10-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch HL*1.6*81, Correct setup for sites using DNS and HL7
                     READ THIS IMPORTANT INFORMATIONAL PATCH
                     * * * * * * * * * * * * * * * * * * * *
       
       
      This Patch Addresses the Following NOIS Call:
      ---------------------------------------------
       
      ISB-0901-31233, HL7 DNS uses and helpful Websites
       
       
      ==========================================================
      Problem Scenario:
      -----------------
       
      Through monitoring the HL7 Network between Veterans Affairs Medical
      Centers (VAMC) and the Master Patient Index (MPI), a need has arisen for
      clarification on the use of HL7 and Domain Name Servers (DNS). Mainly, the
      IP address where the HL7 Listener is running at the sites must match the
      IP address associated with the HL7 domain name in the DNS.
       
       
       
      Patch Solution:
      ---------------
       
      The express purpose of this Informational Patch is to make sites aware of
      the HL7 Frequently Asked Questions (FAQ) web site. It addresses
      information on DNS support as it relates to HL7. Specifically, it provides
      information on how to ensure that sites are correctly set up to use the
      DNS with respect to HL7. This is addressed in the FAQ beginning at the
      question "How do I correctly set up my site to use DNS?". 
       
      Category:  INFORMATIONAL
      Here is the URL for the HL7 FAQ web site:
       
          http://vaww.vista.domain.ext/hl7/hl7_faq.htm.
       
       
      Note: Even though this is an informational patch, please be sure to 
            install it so the FORUM Patch tracking system gets updated.
       
      Installation Instructions:
      ==========================
       
       
      1.  Users are allowed to be on the system during the installation.
       
      2.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
          option will load the KIDS package onto your system.
       
      3.  This patch is now loaded into a transport global on your
          system. The next step is to use KIDS to install the Transport
          global. To do this, use the 'Installation [XPD INSTALLATION
          MENU]' menu.  On this menu, use the following options in the
      Description:
          order shown below:
       
            3  Print Transport Global
            6  Install Package(s)
       
          When using the 'Install Package(s)' option to install the patch 
          build, you will be asked the following questions.  The questions
          asked and the answers you should supply are shown below:
       
            INSTALL NAME: HL*1.6*81
      ===========
            Want KIDS to INHIBIT LOGONS during the install?  <NO>
            Want to DISABLE Scheduled Options, Menu Options, and
            Protocols?  <NO>
       
                     * * * * * * * * * * * * * * * * * * * *
      
    • 75 SEQ #68
      DATE APPLIED:   2001-11-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The test sites for Patch HL*1.6*75 are Bay Pines VAMC, Palo Alto VAMC, 
      back up, the option forces you to stop the process before you can re-
      set to Shutdown, then the client logical link quits and the Link 
      Manager will not attempt to restart the Link. In this particular case,
      the SHUTDOWN LLP field (#14) is set to YES in the HL LOGICAL LINKS 
      file.
       
      The other condition in which the value Error gets stuffed in the STATE 
      field (#4) is when the client logical link gets an unexpected error. If 
      the client logical link encounters an error other than the expected 
      errors: OPENERR, NOTOPEN, DEVNOTOPN, WRITE, or READ, it logs the error 
      in the error trap and shuts down the client logical link.
      enable it to continue the communication process.
       
      In this case, the SHUTDOWN LLP field is set and the client logical link 
      has to be restarted manually.
      =======================================================================
       
       
      THIS PATCH ADDRESSES THE FOLLOWING ISSUE:
      =========================================
       
        1.  E3R #14227, MAKE HL START ALITTLE SMARTER  [#31168789]
       
       
       
      ROUTINE INFORMATION: 
      ====================
       
      The following routine is included in this patch. The second line of the 
      routine now looks like this: 
       
       ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995 
       
      Note: Entries in the HL LOGICAL LINKS file (#870) that are in an Error 
                       Checksum 
       Routine         Old         New            2nd Line  
       ========      ========     ========     ====================
       
       HLCSLNCH      12643769     13101795     **6,19,43,49,57,75**
       
       List of preceding patches: 57
       
       Sites should use CHECK^XTSUMBLD to verify checksums.  
       
            STATE can be identified on the System Link Monitor by the word 
       
      INSTALLATION INSTRUCTIONS: 
      ==========================
       
        1.  Users are allowed to be on the system during the installation.
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed 
            in the Routine Summary section are mapped, they should be removed 
            from the mapped set at this time.  
       
            Error in the STATE column.
        3.  Use the INSTALL/CHECK MESSAGE option on the PackMan menu. This 
            option will load the KIDS package onto your system.   
       
        4.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.
            To do this, on the KIDS menu under Installation, use the 
            following options: 
       
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
       
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
       
                   INSTALL NAME: HL*1.6*75 
       
                                 =========
       
              Answer NO to the prompt 'Want KIDS to INHIBIT LOGONS during the 
              install?'.  
      The following is a screen capture of the HL7 System Link Monitor with a
       
              Answer NO to the prompt 'Want to DISABLE Scheduled Options, 
              Menu Options'.
       
        5.  DSM Sites: Rebuild your mapped set if necessary.  
      client logical link in an Error STATE.
       
      and San Francisco VAMC.
       
      HL7 System Link Monitor
      =======================================================================
                    SYSTEM LINK MONITOR for ISC SALT LAKE CITY (T System)
       
                      MESSAGES  MESSAGES   MESSAGES  MESSAGES  DEVICE  
           NODE       RECEIVED  PROCESSED  TO SEND   SENT      TYPE     STATE
       
           VADAN      38        38         38        38         NC      Error
       
       
       
       
       
           Incoming filers running => 1            TaskMan running 
           Outgoing filers running => 1            Link Manager running
       
           Select a Command:
       (N)EXT  (B)ACKUP  (A)LL LINKS  (S)CREENED  (V)IEWS  (Q)UIT  (?) HELP:
      =======================================================================
       
       
       
      The following screen capture shows the two steps required to re-enable 
      the client logical link (VADAN) shown in the previous screen capture.
       
       
      Step 1 (Screen Capture Begins Here)
      =======================================================================
            Select Communications Server Option:  Start/Stop Links 
       
            This option is used to launch the lower level protocol for the
      PATCH DESCRIPTION:
            appropriate device.  Please select the node with which you want
            to communicate
       
            Select HL LOGICAL LINK NODE:    VADAN
       
            The LLP was last started on APR 14, 2000 11:20:58.
       
            Okay to shut down this job? YES
       
            The job for the VADAN Lower Level Protocol will be shut down.
      ==================
      =======================================================================
      (Screen Capture Ends Here For Step 1)
       
       
      Step 2 (Screen Capture Begins Here)
      =======================================================================
       
            Select Communications Server Option:  Start/Stop Links
       
            This option is used to launch the lower level protocol for the
       
            appropriate device.  Please select the node with which you want
            to communicate
       
            Select HL LOGICAL LINK NODE:    VADAN
       
            The LLP was last shutdown on APR 17, 2000 13:32:47.
            This LLP has been enabled!
      =======================================================================
      (Screen Capture Ends Here For Step 2)
       
      Currently if the System Link Monitor displays a client logical link in
       
      Before this patch (Patch HL*1.6*75), using the option Start/Stop Links 
      to re-enable a client logical link in an Error STATE was a two-step 
      process. After this patch has been installed, using the option 
      Start/Stop Links to re-enable a client logical link in an Error STATE 
      will become a one-step process. However, this will only apply to client 
      logical links in which the SHUTDOWN LLP field is set to YES while in an 
      Error STATE. (See the following explanation "Description of What Causes 
      an Error State" for more information on Error States.)
       
      an Error STATE and you use the HL START option to attempt to start it
       
      Description of What Causes an Error State
      =======================================================================
      Error STATEs can be related to retransmissions.  If the number of retry 
      attempts has been exceeded, an alert is sent and the word Error appears 
      in the STATE column on the System Link Monitor for that client logical 
      link. This relates to the EXCEED RE-TRANSMIT ACTION field (#200.021) in 
      the HL LOGICAL LINKS file. If the EXCEED RE-TRANSMIT ACTION field is 
      set to Restart, the client logical link quits and the Link Manager 
      queues (restarts) the link. If the EXCEED RE-TRANSMIT ACTION field is 
      
    • 82 SEQ #69
      DATE APPLIED:   2001-11-21 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch HL*1.6*82
      protocol during the APIs GENERATE^HLMA or DIRECT^HLMA, and any of the
      protocols in HLL("LINKS") is not a subscriber type protocol, the message
      is created, but an error is returned.
       
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patch HL*1.6*76.
      ============================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
       
             ;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;JUL 17,1995
       
                   Before       After
      Name         Checksum     Checksum     Patch List
      ---------------------------------------------------------------------
      HLCS2        10270936     10941124     14,40,43,49,57,58,82
      HLMA          7962943      9200711     19,43,58,63,66,82
      HLMA2         8028267      8331015     19,43,57,58,64,65,76,82
      * Checksums produced by CHECK^XTSUMBLD
       
      NOIS: ISF-0600-61085
      This patch introduces no new routines.
      ============================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patch HL*1.6*76.
      1. Users may be on the system during the installation of this patch.
      2. DSM Sites: If any of these routines is mapped, disable mapping for the
         affected routine(s).
      3. Shutdown all Logical Links and incoming and outgoing filers, and
      Test Sites: FO-OAKLAND
         the Link Manager. Use the options:
       
           Filer and Link Management Options -> 
               SA     Stop All Messaging Background Processes
               LM     TCP/IP Link Manager Start/Stop
       
      4. DSM sites: Disable all HL7 UCX Services for this installation.
      5. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu to load the
         KIDS package into a Transport global on your system.  
      6. On the KIDS:Installation menu, use the following options to install the
      If you call the APIs GENERATE^HLMA or DIRECT^HLMA, with HLL("LINKS") pre-
         Transport Global:
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
       Select INSTALL NAME: HL*1.6*82     Loaded from Distribution  <date/time>
                            =========
       Install Questions for HL*1.6*82
       
      set, but incorrectly, the API should return an error, but it doesn't. This
       Want KIDS to INHIBIT LOGONS during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <Do NOT queue it!>
                      ------------------
      patch ensures that an error is returned, before any message is created.
      7. Startup all Logical Links and incoming and outgoing filers. Use the 
       
           Filer and Link Management Options ->
               RA     Restart/Start All Links and Filers
         (Note: Links which do not have "autostart" enabled will need to
                be restarted manually)
         
      8. DSM Sites: If you previously disabled an HL7 UCX Service for this
         installation, you may now enable it.
      9. DSM Sites: Rebuild your mapped set if necessary.
       
      10. Start Link Manager using the option: "TCP/IP Link Manager Start/Stop."
      If HLL("LINKS") is set in the routing logic or the entry action of a
      
    • 83 SEQ #70
      DATE APPLIED:   2001-11-21 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch HL*1.6*83
       
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patch HL*1.6*66.
      ============================================================================
       
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;JUL 17,1995
       
                   Before       After
       
      Name         Checksum     Checksum     Patch List
      ---------------------------------------------------------------------
      HLSUB         5558527      5395528     14,57,58,59,66,83
      * Checksums produced by CHECK^XTSUMBLD
       
      This patch introduces no new routines.
      ============================================================================
       
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when activity is at
      NOIS: ISA-0800-11764
      a minimum.  It requires HL7 patch HL*1.6*66.
      1. Users may be on the system during the installation of this patch.
      2. DSM Sites: If any of these routines is mapped, disable mapping for the
         affected routine(s).
      3. Shutdown all Logical Links and incoming and outgoing filers, and
         the Link Manager. Use the options:
       
           Filer and Link Management Options -> 
               SA     Stop All Messaging Background Processes
               LM     TCP/IP Link Manager Start/Stop
      Test Sites: FO-ALBANY
       
      4. DSM sites: Disable all HL7 UCX Services for this installation.
      5. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu to load the
         KIDS package into a Transport global on your system.  
      6. On the KIDS:Installation menu, use the following options to install the
         Transport Global:
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
      If VistA HL7 is processing an HL7 message, and calls the API UPD^HLSUB
               6 Install Package(s) 
       Select INSTALL NAME: HL*1.6*83     Loaded from Distribution  <date/time>
                            =========
       Install Questions for HL*1.6*83
       
       Want KIDS to INHIBIT LOGONS during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
      to add/update a subscription, and the 5th parameter indicates that the
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
       
       DEVICE: HOME// <Do NOT queue it!>
                      ------------------
      7. Startup all Logical Links and incoming and outgoing filers. Use the 
       
           Filer and Link Management Options ->
               RA     Restart/Start All Links and Filers
         (Note: Links which do not have "autostart" enabled will need to
      termination date should be deleted, and there's already a subscription
                be restarted manually)
         
      8. DSM Sites: If you previously disabled an HL7 UCX Service for this
         installation, you may now enable it.
      9. DSM Sites: Rebuild your mapped set if necessary.
      10. Start Link Manager using the option: "TCP/IP Link Manager Start/Stop."
      with a termination date, it fails to delete the termination date.
      This patch fixes that. 
      
    • 79 SEQ #71
      DATE APPLIED:   2001-12-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      HL7 Capacity Mgt Phase I API
      
    • 62 SEQ #72
      DATE APPLIED:   2001-12-31 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch HL*1.6*62
      inbound filers.  A whole file cross reference has been added to message
                   Before       After
      Name         Checksum     Checksum     Patch List
      ---------------------------------------------------------------------
      HLCSDR1      10571563      8554313     2,22,27,30,34,62
      HLCSDR2       5218053      4813200     2,9,62
      HLCSIN        2517664      4825867     2,30,14,19,62
      HLCSOUT       4118513      4765416     25,30,62     
      HLCSUTL2      2181860      2309661     18,28,62
      HLPAT62        *NEW*        236063     62
      HLUOPT1      13112533     12526225     10,13,21,36,19,47,62
      STATUS field of the IN QUEUE multiple of the HL LOGICAL LINK FILE, #870.
      * Checksums produced by CHECK^XTSUMBLD
      
      This patch introduces the following new routine:
      HLPAT62 - post-init for this patch has no user-callable entry points
      ============================================================================
      
      INSTALLATION:
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patches HL*1.6*28, *34, & *47.
      1. Users may be on the system during the installation of this patch.
      The inbound filers can now go directly to the logical links which have
      2. DSM Sites: If any of these routines is mapped, disable mapping for the
         affected routine(s).
      3. Shutdown all Logical Links and incoming and outgoing filers, and
         the Link Manager. Use the options:
       
           Filer and Link Management Options -> 
               SA     Stop All Messaging Background Processes
               LM     TCP/IP Link Manager Start/Stop
      
      4. DSM sites: Disable all HL7 UCX Services for this installation.
      inbound messages pending, instead of constantly checking each logical
      5. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu to load the
         KIDS package into a Transport global on your system.  
      6. On the KIDS:Installation menu, use the following options to install the
         Transport Global:
               2 Verify Checksums in Transport Global 
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
       Select INSTALL NAME: HL*1.6*62     Loaded from Distribution  <date/time>
      link to see if any messages are pending.
                            =========
       Install Questions for HL*1.6*62
      
       Want KIDS to Rebuild Menu Trees Upon Completion of Install? YES// YES
                                                                         ===
       Want KIDS to INHIBIT LOGONS during the install? YES// NO
                                                             ==
       Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
                                                                             ==
       Enter the Device you want to print the Install messages.
      
       You can queue the install by enter a 'Q' at the device prompt.
       Enter a '^' to abort the install.
      
       DEVICE: HOME// <Do NOT queue it!>
                      ------------------
      7. Startup all Logical Links and incoming and outgoing filers. Use the 
       
           Filer and Link Management Options ->
               RA     Restart/Start All Links and Filers
         (Note: Links which do not have "autostart" enabled will need to
      The post-init for this patch will go through file 870 and fire the new xref.
                be restarted manually)
         
      8. DSM Sites: If you previously disabled an HL7 UCX Service for this
         installation, you may now enable it.
      9. DSM Sites: Rebuild your mapped set if necessary.
      10. Start Link Manager using the option: "TCP/IP Link Manager Start/Stop."
      
      Here's the updated field with its new xref:
      * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
      
      STANDARD DATA DICTIONARY #870.019 -- IN QUEUE SUB-FILE
      STORED IN ^HLCS(870,
      DATA        NAME               GLOBAL        DATA
      ELEMENT     TITLE              LOCATION      TYPE
      --------------------------------------------------------------------------
      870.019,1   STATUS              0;2 SET
                                 'P' FOR PENDING; 
                                 'D' FOR DONE PROCESSING; 
                                 'S' FOR STUB RECORD; 
                  LAST EDITED:   MAY 08, 2000 
      NOIS: LAS-0100-61912, GRJ-0400-51133, HIN-0501-42418
                  HELP-PROMPT:   This is the status of an individual message in 
                                 the queue. These statuses control the flow and 
                                 processing of the message. 
                  DESCRIPTION:   Status of a particular message. Can be Stub,
                                 Pending, or Done.  These statuses control the
                                 processing of a message. For example, a stub
                                 record is created when a message is enqueued,
                                 and cannot be processed until its status is
                                 changed from 'stub' to 'pending'.  Changing
                                 this status is the last thing the Low Layer
      Test Sites: Las Vegas, NV; Grand Junction, CO
                                 Protocol does after reading in a message. 
                                 Finally, once the message has been processed,
                                 its status is changed to 'done'.  
                  CROSS-REFERENCE:  870^AISTAT 
                                 1)= S ^HLCS(870,"AISTAT",$E(X,1,30),DA(1),DA)=""
                                 2)= K ^HLCS(870,"AISTAT",$E(X,1,30),DA(1),DA)
                                 Used to quickly identify links with messages
                                 in any status, thus improving performance.
      * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
      
      This patch increases the amount of time between checks to see if the filers
      The option, HL PURGE TRANSMISSIONS, is updated to improve the description
      and to set the SCHEDULING RECOMMENDED field to YES.
      
      Here's the updated option:
      * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
      NAME: HL PURGE TRANSMISSIONS            MENU TEXT: Purge Messages
      TYPE: run routine                     CREATOR: DIMICELI,RON
      PACKAGE: HEALTH LEVEL SEVEN
      DESCRIPTION:   This option purges entries from the HL7 message files: 
       773 - HL7 MESSAGE ADMINISTRATION 
      have been asked to stop.  In most cases, the check is performed at most
       772 - HL7 MESSAGE TEXT 
        
      These files contain a record of all outgoing HL7 transmissions and their 
      status.  Messages are purged if they are in a certain status and are a
      certain number of days old.  The default parameters (number of days) are
      taken from fields in file 869.3, HL COMMUNICATION SERVER PARAMETERS.  The
      fields should be set such that a balance is struck between the need to
      keep disk space from filling up and the need to keep messages around long
      enough so that they can be investigated in case problems arise.  Please
      see the descriptions of these fields for more information: 
      once a minute.
        41 - PURGE COMPLETED MESSAGES 
        42 - PURGE AWAITING ACK MESSAGES 
        43 - PURGE ALL MESSAGES 
       
      Note that the number of days in field 43 must be greater than or equal to
      the number of days in field 42, which must be greater than or equal to the
      number of days in field 41.  If any of the fields violates this rule, then
      the default values of these fields will be used, instead.  
       
      To purge entries in an error status, run this option directly and answer
      
      'Yes' to the question about purging them.  It is recommended that entries in
      an error status be reviewed before purging.  For this reason, such messages
      are NOT purged by automatically recurring scheduled runs of this option.  
       
      It is recommended that this option be scheduled to run once a day to keep
      the files from getting too large.  On TaskMan's 'Edit Option Schedule', the
      TASK PARAMETERS field is ignored.  Instead, the parameters are taken from
      the fields in file 869.3, noted above.  
      ROUTINE: PURGE^HLUOPT1                TIMESTAMP: 55644,54515
      SCHEDULING RECOMMENDED: YES           UPPERCASE MENU TEXT: PURGE MESSAGES
      For serial connections, this patch also improves the efficiency of the
      * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
      
      NOTE: This patch should be installed during off hours, when activity is at
      a minimum.  It requires HL7 patches HL*1.6*28, *34, & *47.
      ============================================================================
      
      ROUTINES:
      The second line of the routine now looks like:
             ;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;JUL 17,1995
      
      
    • 78 SEQ #73
      DATE APPLIED:   2002-02-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Test sites:    San Francisco VAMC, Bay Pines VAMC, Nashville VAMC
      creating HL7 batch messages. A mismatch in field separator characters will
      occur in a message if a VistA application specifies a field separator
      character other than the Circumflex.
       
      This patch removes the dependency on hard-coded field separator characters
      in VistA HL7. This change will accommodate VistA applications that use
      field separator characters other than the Circumflex, ensuring that batch
      messages will have the same field separator character in all their
      segments.
       
       
       
      Routine Information:
      =====================
       
      The following routine is included in this patch.  The second line of the
      routine now looks like this:
       
      ;;1.6;HEALTH LEVEL SEVEN;<PATCHLIST>; Oct 13, 1995.
       
      The VA Kernel checksums for this routine (calculated using 
      NOIS:          ISH-0701-40476, Incorrect field separator in BTS segment
      CHECK^XTSUMBLD) are listed below:
       
                      Checksum        Checksum        
        Routine Name  Before Patch    After Patch     Patch List
        ============  ============    ===========     =====================
        HLTF1         9479987         9693677         **5,8,22,25,19,78**
       
      Sites should use CHECK^XTSUMBLD to verify checksums after the patch
      has been installed.
       
       
      Installation Instructions:
       ==========================
       
         1.  Users are allowed to be on the system during the installation.
       
         2.  AXP/DSM SITES: Review your mapped routine set.  If any of the
             routines listed in the ROUTINE SUMMARY section are mapped, they
             should be removed from the mapped set at this time.
       
         3.  Shutdown all Logical Links, incoming and outgoing filers, and
      Note:          This patch requires that KIDS build HL*1.6*19
             the Link Manager using the Filer and Link Management options
             listed below:
       
               Stop All Messaging Background Processes [HL STOP ALL]
               TCP Link Manager Start/Stop [HL START/STOP LINK MANAGER]
       
             AXP/DSM SITES ONLY: Disable all HL7 UCX Services for this
             installation.
       
         4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
                     be installed.
             option will load the KIDS package onto your system.
       
        5.  This patch is now loaded into a transport global on your
             system. The next step is to use KIDS to install the Transport
             global. To do this, use the 'Installation [XPD INSTALLATION 
             MENU]' menu.  You should use each of the following 'Installation'
             menu options in the order shown below:
       
         2  Verify Checksums in Transport Global
         3  Print Transport Global
       
         4  Compare Transport Global to Current System
         5  Backup a Transport Global
         6  Install Package(s)
       
             When using the 'Install Package(s)' menu option to install 
             the patch build, you will be asked several questions.  The 
             questions asked, and the answers you should supply, are 
             shown below.
       
               INSTALL NAME: <HL*1.6*78>
      NOIS call ISH-0701-40476 reported the existence of the Circumflex
               Want KIDS to INHIBIT LOGONS during the install?  <NO>
               Want to DISABLE Scheduled Options, Menu Options, and
               Protocols?  <NO>
       
         6.  Start up all Logical Links and incoming and outgoing filers using
             the Filer and Link Management Option's 'Restart/Start All Links
             and Filers [HL TASK RESTART]' menu option.
       
             (Note that links that do not have "autostart" enabled will need
             to be restarted manually.)
      character (^) hard-coded as the field separator in the BTS segment when
       
             AXP/DSM SITES ONLY: If you previously disabled an HL7 UCX Service
             for this installation, you may enable it now.
       
         7.  AXP/DSM Sites:  After the patch has been installed, rebuild your
             map set, if necessary.
       
         8.  Start Link Manager using the 'TCP Link Manager Start/Stop [HL
             START/STOP LINK MANAGER]' menu option. 
      
    • 71 SEQ #74
      DATE APPLIED:   2002-03-15 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Test sites: Bay Pines, Grand Junction, Sheridan, Tampa,
       
               and Protocols?'.  
       
        6.  Startup all Logical Links and incoming and outgoing filers. Use the 
       
              Filer and Link Management Options -> 
                  RA     Restart/Start All Links and Filers 
              (Note that links that do not have "autostart" enabled will need to 
              be restarted manually) 
       
            For DSM sites ONLY, if you previously disabled an HL7 UCX Service 
      Description:
            for this installation, you may now enable it.  
       
        7.  DSM Sites: Rebuild your mapped set if necessary.  
       
        8.  Start Link Manager using the option: "TCP/IP 
              Link Manager Start/Stop." 
      ============
       
      Patch HL*1.6*71 fixes the corruption of the MSH Header where the MSH segment 
      is received a second time after the body of the HL7 message has been received.  
      What occurs is the current VistA HL7 TCP/IP code attempts to reset itself when 
      incomplete data is received.  This usually happens when a timeout has expired 
      and the complete MSH segment has not been received. When this happens, VistA 
      HL7 drops original MSH Header. The original body of the message is now left 
                  Milwaukee, and Iron Mountain
      without the header. Next, the sender of the original message resends a repeat 
      of the original MSH Header and the body again. The outcome is shown below:
       
        1) Message body.
        2) Message (MSH) header.
        3) Message body. 
       
      VistA HL7 now read 1) the Message body and 2) the Message Header as the
      original message header itself. 
       
       
      After the installation of this patch (HL*1.6*71), VistA HL7 listeners will no 
      longer attempt to reset after timeouts have occurred, once a start block has
      been received.
       
      This patch also fixes the problem where VistA HL7 will attempt to process an 
      incomplete message.  These incomplete messages are the result of a timeout 
      occurring before the end-block character (<EB>) is reached while reading
      inbound data.  Also, network performance issues may contribute to the
      occurrence of Read timeouts.  Furthermore, large inbound messages (100 lines
      or more) with relatively short Read timeouts on the receiving side
      Patch HL*1.6*71 addresses the following NOIS:
      can also increase the likelihood of receiving incomplete messages.
      This patch will discard all incomplete messages as if no data
      had been received. At which point, the sender of the HL7 message needs 
      to resend the message again to ensure guaranteed delivery.
       
       
      Routine Information:
      ====================
      The following routines are included in this patch.  The second line
      of each of these routines now looks like:
       
       
        ;;1.6;HEALTH LEVEL SEVEN;<patchlist>;JUL 17,1995
       
                         Checksum
        Routine         Old         New            2nd Line
        ========     ========     ========     =====================     
        HLCSTCP1      5081718      5982461     **19,43,57,64,71**
       
        List of preceding patches: 64
        Sites should use CHECK^XTSUMBLD to verify checksums.
         1. ISH-1100-40056  mpi/pd: commit ack issue, 'MSH' multiple corruption
       
       
      Installation Instructions: 
      ==========================
       
        1.  Users are allowed to be on the system during the installation.  
       
        2.  DSM SITES: Review your mapped set.  If any of the routines listed in
            the Routine Summary section are mapped, they should be removed from 
            the mapped set at this time.  
         2. MAC-0101-61601  corrupted MSH multiple (773) 
       
        3.  Shutdown all Logical Links and incoming and outgoing filers, and
            the Link Manager. Use the options:
       
              Filer and Link Management Options -> 
                  SA     Stop All Messaging Background Processes
                  LM     TCP/IP Link Manager Start/Stop
       
            For DSM sites ONLY, disabled all HL7 UCX Services 
            for this installation.
         3. ISA-1101-11782  HL7 MESSAGE TRUNCATED ON REMOTE USER LOGGING
       
        4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
            option will load the KIDS package onto your system.  
       
        5.  The patch has now been loaded into a Transport global on your 
            system. You now need to use KIDS to install the Transport global.  
            On the KIDS menu, under the 'Installation' menu, use the following 
            options: 
       
               2 Verify Checksums in Transport Global 
       
               3 Print Transport Global 
               4 Compare Transport Global to Current System 
               5 Backup a Transport Global 
               6 Install Package(s) 
                   INSTALL NAME: HL*1.6*71 
                                 =========
       
              Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.  
       
              Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
      
    • 18 SEQ #15
      DATE APPLIED:   1997-03-07 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The Inbound and Outbound filers can be forced into an infinite loop if
       
              ;;1.6;HEALTH LEVEL SEVEN;**18**;Oct 13, 1995
       
      To install this patch
      =====================
       
      1. Stop all running filers (select options 4 and 5, below)
       
      Select Communications Server Option: MANage incoming & outgoing filers
       
      entries in file 869.3 (HL COMMUNICATION SERVER PARAMETERS) are deleted.
       
         1      Start default number of incoming & outgoing filers
         2      Start an incoming filer
         3      Start an outgoing filer
         4      Stop all incoming filers
         5      Stop all outgoing filers
         6      Stop an incoming filer
         7      Stop an outgoing filer
       
       
      The file and related monitors will then not provide accurate information
      2. AXP sites should check and remove HL* from their map sets.
             (Mapping of HL7 1.6 routines is not recommended at this time)
       
      3. Users may remain on the system.
       
      4. Load the KIDS BUILD FILE using the Packman option INSTALL/CHECK
      MESSAGE.
       
      5. On the KIDS menu, under the 'Installation' menu, use the following 
             option: 
      regarding the number of filers actually running on your system.
               Select Installation Option:  Install Package(s) 
                                           ==================
               Select INSTALL NAME:  HL*1.6*18 
                                    =========
               Answer 'NO' to 'Want to DISABLE Schedule Options, Menu Options,
               and Protocols?' 
       
      6. MSM Sites - Answer 'YES' to the question 'Want to MOVE routines to
             other CPUs?' Then enter the names of your other Compute and Print
             server(s).  
       
       
      7. After the KIDS installation has completed, remember to re-start your
      default number of INBOUND and OUTBOUND filers. (option 1 above)
      The routine ^HLCSUTL2 has been modified to signal a filer to stop whether
      the user sets the stop flag or actually deletes the entry from the file.
       
      The second line of HLCSUTL2 now looks like:
      
    • 89 SEQ #75
      DATE APPLIED:   2002-04-23 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Test sites:    MPI
      TMP("HCSI",$J,1).  Inadequate coding in the Health Level Seven (HL7)
      package's direct connect software is the cause of this problem.  Patch
      HL*1.6*89 fixes this undefined error condition.
       
      The routine HLCSAS is included in this patch.  The first and second
      lines of this routine are shown below.
       
         HLCSAS  ;ISCSF/RWF - MPI direct connect server ;02/19/99  11:44
                 ;;1.6;HEALTH LEVEL SEVEN;**43,89**;Jul 17,1995
       
       
      The VA Kernel checksum for the routine included in this patch
      (calculated using CHECK^XTSUMBLD) is listed below.
       
                      Checksum        Checksum
        Routine Name  Before Patch    After Patch     Patch List
        ============  ============    ===========     =====================
        HLCSAS        2943880         3066068         43,89
       
      Sites should use CHECK^XTSUMBLD to verify checksums after patch
      installation.
      NOIS:          ISF-0102-62265
       
       Installation Instructions:
       ==========================
       
         NOTICE:  Do not proceed unless patch HL*1.6*43 has been installed.
       
         1.  Users are allowed to be on the system during the installation.
       
         2.  AXP/DSM SITES: Review your mapped routine set.  If the
             routine listed in the ROUTINE SUMMARY section is mapped, it
       
             should be removed from the mapped set at this time.
       
         3.  Shutdown all Logical Links, incoming and outgoing filers, and
             the Link Manager using the Filer and Link Management options
             listed below.
       
                Stop All Messaging Background Processes [HL STOP ALL]
                TCP/IP Link Manager Start/Stop [HL START/STOP LINK MANAGER]
       
            AXP/DSM SITES ONLY: Disable all HL7 UCX Services for this
      Note:          This patch requires that KIDS build HL*1.6*43
            installation.
       
         4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
             option will load the KIDS package onto your system.
       
         5.  This patch is now loaded into a transport global on your
             system. The next step is to use KIDS to install the Transport
             global. This is done using the 'Installation' menu's 'Install
             Package(s) [XPD INSTALL BUILD]' menu option. When using this
             menu option to install the patch build, you will be asked
                     be installed.
             several questions.  The questions, and the answers you should
             supply, are shown below.
       
             INSTALL NAME: <HL*1.6*89>
             Want KIDS to INHIBIT LOGONS during the install?  <NO>
             Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?  <NO>
       
         6.  Start up all Logical Links and incoming and outgoing filers using
             the Filer and Link Management Option's 'Restart/Start All Links
       
             and Filers [HL TASK RESTART]' menu option.
       
             (Note that links that do not have "autostart" enabled will need
             to be restarted manually.)
       
            AXP/DSM SITES ONLY: If you previously disabled an HL7 UCX Service
            for this installation, you may enable it now.
       
         7.  AXP/DSM Sites:  After the patch has been installed, rebuild your
             map set, if necessary.
      The Master Patient Index (MPI) system sometimes experiences an undefined
       
         8.  Start Link Manager using the 'TCP/IP Link Manager Start/Stop [HL
             START/STOP LINK MANAGER]' menu option.
      error at MPIDIRQ+5^MPIDIRQ.  The undefined variable is the local variable
      
    • 92 SEQ #76
      DATE APPLIED:   2002-05-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The purpose of this patch is to export the VAFHIE entry in the
          ACK TIMEOUT: 240
       
      2.  The routines for this patch are new and can be deleted after
          installation; therefore routine mapping is not an issue for
          this patch.
       
      3.  From the Kernel Installation and Distribution System Menu, select
          the Installation menu.
       
      4.  From this menu, you may elect to use the following options (when
          prompted for the INSTALL NAME, enter HL*1.6*92).
          TCP/IP ADDRESS: 127.0.0.1           
       
          (a)  Backup a Transport Global - this option will create a backup
               message of any routines exported with the patch.  It will NOT
               backup any other changes such as DDs or templates.
       
          (b)  Compare Transport Global to Current System - this option will
               allow you to view all changes that will be made when the
               patch is installed.  It compares all components of the patch
               (routines, DDs, templates, etc.).
       
          TCP/IP PORT: 5000
          (c)  Verify Checksums in Transport Global - this option will allow
               you to ensure the integrity of the routines that are in the
               transport global.
       
          (d)  Print Transport Global - this option will allow you to view the
               components of the KIDS build.
       
      5.  Use the Install Package(s) option and select the package HL*1.6*92.
         
      6.  When prompted 'Want KIDS to INHIBIT LOGONs during the install? YES//',
          TCP/IP SERVICE TYPE: CLIENT (SENDER)
          respond NO.
        
      7.  When prompted 'Want to DISABLE Scheduled Options, Menu Options, and
          Protocols? YES//', respond NO.
        
      8.  Routines HLP92ENV and HLP92 can be deleted from your system after
           successful installation of this patch.
       
      The Federal Heath Information Exchange (FHIE) will
      require this enhancement for viewing data from facilities outside
      the Veteran's Health Administration (VHA).  Patch HL*1.6*92 is
      distributed as an EMERGENCY patch because it needs to be in place
      at all facilities to enable FHIE to begin data transmissions by April 25,
      HL LOGICAL LINK (#870) file.  The VAFHIE node is distributed
      2002.
       
      Instructions in patch XM*999*148 must be followed prior to
      installing patch HL*1.6*92.  XM*999*148 is an informational patch
      with directions for creating the FHIE.DOMAIN.EXT domain.
       
      Test Sites:
      ===========
      El Paso VAMC
      San Francisco VAMC
      with data in the following fields:
      Puget Sound HCS
      Washington VAMC
        
      Routine Summary:
      ================
      The following is a list of the routine(s) included in this patch.  The
      second line of each of these routine(s) will look like:
       
      ;;1.6;HEALTH LEVEL SEVEN;**[Patch List]**;JUL 17, 1995
      CHECK^XTSUMBLD results:
       
       
      Routine       Before Patch       After Patch      
      --------      ------------       ------------     
      HLP92             N/A              7643045         
      HLP92ENV          N/A              1183086        
       
      Environment Check Routine HLP92ENV:
      ===================================
      The environment check routine, HLP92ENV, checks to see if patch
      XM*999*148 is in place.  It does this by checking for the existence
          NODE: VAFHIE
      of the FHIE.DOMAIN.EXT entry in the DOMAIN (#4.2) file.  If the
      entry is not found, the routine aborts with the following message:
       
          "No DOMAIN (#4.2) file entry was found for FHIE.DOMAIN.EXT.
          Follow the instructions in VA MailMan patch XM*999*148 to create
          this new entry in the DOMAIN (#4.2) file.  After the new DOMAIN
          has been created, re-install patch HL*1.6*92."
       
      Pre-Install Routine PRE^HLP92:
      ==============================
          INSTITUTION: AUSTIN
      The pre-install routine, PRE^HLP92, looks for the AUSTIN (Station Number
      200) entry in the INSTITUTION (#4) file.  If the entry is present, the
      pre-install is done.  If the entry does not exist, it is created.  This
      entry is pointed to from the HL LOGICAL LINK (#870) file by the VAFHIE
      entry distributed in this patch.
       
      Post-Install Routine PST^HLP92:
      ===============================
      The post-install routine, PST^HLP92, sets the AUTOSTART (#4.5) field
      to Enabled for the VAFHIE entry in the HL LOGICAL LINK (#870) file.
          LLP TYPE: TCP
      Then, it examines the system to determine if it is the production or
      test account.  If it is the production account, the post-install is
      finished.  If it is a test account, the TCP/IP ADDRESS (#400.01) and
      DOMAIN (#.03) fields for the VAFHIE entry in the HL LOGICAL LINK (#870)
      file are removed to ensure that messaging does not occur from a test
      account.
       
      When Installing in Test Account:
      ==========================
      Before installing this patch in your test account, confirm that the
          DOMAIN: FHIE.DOMAIN.EXT
      DEFAULT PROCESSING ID (#.03) field in the HL COMMUNICATION SERVER
      PARAMETERS (#869.3) file is set up properly according to the instructions
      for the creation of a mirror account.  In programmer mode, enter the
      following command.
        
      >W $$PARAM^HLCS2
      45^FO-SLC.DOMAIN.EXT^T^51^ISC SALT LAKE CITY^^3^HL7^25^30^85^30
        
      If the third piece of the returned data is NOT "T", then the steps for
      mirroring a test account should be reviewed and updated.
          EXCEED RE-TRANSMIT ACTION: restart
       
      Installation Instructions:
      ==========================
      This patch may be loaded with users on the system.  You may wish
      to install it during non-peak hours.  Installation will take less
      than 3 minutes.
       
      1.  Use the INSTALL/CHECK MESSAGE option on the Packman menu.  [Note: 
          TEXT PRINT/DISPLAY option in the PackMan menu will display the 
          patch text only.]
      
    • 91 SEQ #77
      DATE APPLIED:   2002-05-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Test sites:    Greater Los Angeles Regional Healthcare (West Los Angeles),
       
       
      All HLP array elements are optional; they are not required when these
      APIs are called.  However, it is strongly recommended that the
      HLP("NAMESPACE") array element be defined whenever it is possible to
      determine the proper namespace.
       
       
      Note: HL7 messaging by the Master Patient Index (MPI) application occurs
            using the EN^HLCSAC API.  The private use of this API by the MPI
            application is covered by Integration Agreement 3471.  It is
      The Health Level 7 (HL7) messages sent and received by sites are being
            important that MPI HL7 messages be assigned the correct namespace,
            and this is done automatically now.  There is no need for the
            MPI application to pass their namespace into the EN^HLCSAC API.
            In the future, if this API is opened up to other applications,
            there is a way to override the MPI namespace saved.  If the
            local variable HLP("NAMESPACE") is defined before calling the
            EN^HLCSAC API, the value of HLP("NAMESPACE") will be saved in
            the message as the namespace.
       
       
      increasingly studied for workflow patterns and totals.  This evaluation of
      The first and second lines of the routines included in this patch are
      shown below.
       
      HLCSAS1 ;ISCSF/RWF - Read data ;08/24/99  08:06
              ;;1.6;HEALTH LEVEL SEVEN;**43,57,91**;Jul 17,1995
      HLMA    ;AISC/SAW-Message Administration Module ;09/20/2001  12:34
              ;;1.6;HEALTH LEVEL SEVEN;**19,43,58,63,66,82,91**;Oct 13, 1995
      HLMA1   ;AISC/SAW-Message Administration Module (Cont'd) ;04/06/99
                10:56
              ;;1.6;HEALTH LEVEL SEVEN;**19,43,91**;Oct 13, 1995
      HL7 data by clients of the HL7 package has resulted in the request for HL7
      HLMA2   ;AISC/SAW-Message Administration Module ;09/20/2001  12:35
              ;;1.6;HEALTH LEVEL SEVEN;**19,43,57,58,64,65,76,82,91**;
                Oct 13, 1995
      HLTF0   ;AISC/SAW,JRP - File Data in Message Text File ;
                05/05/2000 09:01
              ;;1.6;HEALTH LEVEL SEVEN;**12,19,64,91**;Oct 13, 1995
      HLTP1   ;AISC/SAW-Transaction Processor Module (Cont'd) ;04/21/98  09:38
              ;;1.6;HEALTH LEVEL SEVEN;**34,47,91**;Oct 13, 1995
      HLTP4   ;SFIRMFO/RSD - Transaction Processor for TCP ;03/07/2000  17:41
              ;;1.6;HEALTH LEVEL SEVEN;**19,57,59,91**;Oct 13, 1995
      totals subdivided by the namespace of the message's originating package.
       
      The VA Kernel checksum for the routine included in this patch
      (calculated using CHECK^XTSUMBLD) is listed below.
       
                      Checksum        Checksum
        Routine Name  Before Patch    After Patch     Patch List
        ============  ============    ===========     =====================
        HLCSAS1       1743950         2183617         43,57,91
        HLMA          9200711         9200711         19,43,58,63,66,82,91
        HLMA1         3849338         3849338         19,43,91
      Unfortunately, the namespace of a message is not always determinable.
        HLMA2         8331015         8331015         19,43,57,58,64,65,76,82,91
        HLTF0         3232637         3415603         12,19,64,91
        HLTP1         4286011         4286011         34,47,91
        HLTP4         7964901         7964901         19,57,59,91
       
      Sites should use CHECK^XTSUMBLD to verify checksums after patch
      installation.
       
      There are five routines above whose checksums will not change after this
      patch is installed; HLMA, HLMA1, HLMA2, HLTP1, and HLTP4.  The only
       
      changes made to these routines is the addition of comment lines
      documenting the new HLP("NAMESPACE") array element.  Since comment lines
      are not counted in a routine's checksum, the addition of these comment
      lines do not affect the routine's checksums.
       
      Installation Instructions:
      ==========================
       
         NOTICE:  Do not proceed unless patches HL*1.6*47, HL*1.6*57,
                  HL*1.6*59, and HL*1.6*82 have been installed.
      This patch provides a method for HL7 clients to pass their namespace into
       
         1.  Users are allowed to be on the system during the installation.
       
         2.  AXP/DSM SITES: Review your mapped routine set.  If the
             routine listed in the ROUTINE SUMMARY section is mapped, it
             should be removed from the mapped set at this time.
       
         3.  Stop all background processes (logical links and incoming
             and outgoing filers) using the 'Filer and Link Management
             Option's 'Stop All Messaging Background Processes [HL STOP ALL]'
      the HL7 APIs that create messages or acknowledgements. When this is done,
             menu option.
       
         4.  Stop the link manager using the 'TCP Link Manager Start/Stop
             [HL START/STOP LINK MANAGER]' menu option.
       
         5.  AXP/DSM SITES ONLY: Disable all HL7 UCX Services for this
             installation.
       
         6.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
             option will load the KIDS package onto your system.
      the provided namespace will be stored with the message, enabling
       
         7.  This patch is now loaded into a transport global on your
             system. The next step is to use KIDS to install the Transport
             global. This is done using the 'Installation' menu's 'Install
             Package(s) [XPD INSTALL BUILD]' menu option. When using this
             menu option to install the patch build, you will be asked
             several questions.  The questions, and the answers you should
             supply, are shown below.
       
             INSTALL NAME: <HL*1.6*91>
                     Grand Junction, Sheridan
      subsequent totaling by namespace.  Additional details of this patch are
             Want KIDS to INHIBIT LOGONS during the install?  <NO>
             Want to DISABLE Scheduled Options, Menu Options,
               and Protocols?  <NO>
       
         8.  Start all background processes (logical links and incoming
             and outgoing filers) using the Filer and Link Management
             Option's 'Restart/Start All Links and Filers [HL TASK RESTART]'
             menu option.
       
             (Note that links that do not have "autostart" enabled will need
      provided next.
             to be restarted manually.)
       
         9. AXP/DSM SITES ONLY: If you previously disabled an HL7 UCX Service
            for this installation, you may enable it now.
       
        10.  AXP/DSM SITES ONLY: After the patch has been installed, rebuild
             your map set, if necessary.
       
        11.  Start the link manager using the 'TCP Link Manager Start/Stop
             [HL START/STOP LINK MANAGER]' menu option.
       
      DETAILS
       
      There are three supported HL7 APIs by which HL7 messages are created:
       
       - GENERATE^HLMA(HLEID,HLARYTYP,HLFORMAT,.HLRESLT,HLMTIEN,.HLP)
       - GENACK^HLMA1(HLEID,HLMTIENS,HLEIDS,HLARYTYP,HLFORMAT,
                     .HLRESLTA,HLMTIENA,.HLP)
       
       - DIRECT^HLMA(HLEID,HLARYTYP,HLFORMAT,.HLRESLT,HLMTIEN,.HLP)
       
      In all three APIs, the last parameter HLP is passed by reference.  Prior
      to calling these APIs, the client package may set HLP array elements and
      then pass these by reference into the API.  An example call using the HLP
      array is shown below.
       
        <tab>S HLP("SECURITY")=1214315
        <tab>D GENERATE^HLMA(HLEID,HLARYTYP,HLFORMAT,.HLRESLT,HLMTIEN,.HLP)
       
      NOIS:          None
      These APIs, including the HLP pass-by-reference array, are documented in
      section 12.1.2, 12.1.3, and 12.1.4 of the VistA HL7 Site Manager &
      Developer Manual.
       
      After patch HL*1.6*91 is installed, an additional HLP array element may
      be defined before calling these APIs by which the namespace of the client
      process can be made known to the API code.  This additional HLP array
      element is HLP("NAMESPACE").  An example call using this new array
      element is shown below.
       
       
        <tab>S HLP("NAMESPACE")="DG"
        <tab>S HLP("SECURITY")=1214315
        <tab>D GENERATE^HLMA(HLEID,HLARYTYP,HLFORMAT,.HLRESLT,HLMTIEN,.HLP)
       
      (The array contained in these three APIs is HLP, and this patch
      documentation consistently refers to HLP.  However, since this is a
      pass-by-reference array, any array name may be selected by the client
      process calling these APIs.)
       
      Patch HL*1.6*91 creates a new field in the HL7 Message Text file (#772)
      Note:          This patch requires that KIDS builds HL*1.6*47, HL*1.6*57,
      to store the client process namespace when it is passed as described
      above.  This new field's definition is shown below.
       
      'NAMESPACE' FIELD STANDARD DATA DICTIONARY LISTING
      --------------------------------------------------
      772,16        NAMESPACE              0;13 FREE TEXT
       
             INPUT TRANSFORM:  K:$L(X)>4!($L(X)<1)!'(X?1U1.3NU) X
             LAST EDITED:      FEB 15, 2002
             HELP-PROMPT:      Answer must be 1-4 characters in length,
                     HL*1.6*59, and HL*1.6*82 be installed.
                               and start with 1 uppercase letter,
                               followed by up to 3 uppercase letters and
                               numerics.
             DESCRIPTION:      This field must not be filled in
                               manually.  It will be filled in
                               automatically by the HL7 processes that
                               create entries in the HL7 Message Text
                               file (#772).  In most instances,
                               applications will call GENERATE^HLMA,
                               GENACK^HLMA, or DIRECT^HLMA.  When they
       
                               do, they will pass by reference into the
                               last OPTIONS (in the documentation)
                               parameter the value of the namespace.
                               The value of the namespace will be in the
                               form of OPTIONS("NAMESPACE")=NAMESPACE.
       
                               Please note that the calls to the three
                               APIs mentioned above use the variable HLP
                               to hold the passed in by reference array.
                               So, in the HLMA code (and other code
      OVERVIEW
                               invoked by HLMA), the actual variable
                               used is HLP("NAMESPACE").
       
                               This field is populated by UPDATE^HLTF0.
       
      When the client process defines HLP("NAMESPACE") prior to the API call,
      and passes in the HLP array (as shown in the above example), the defined
      namespace is stored in the HL7 Message Text file (#772) entry created.
      The code that actually stores HLP("NAMESPACE") in this file is contained
      in UPDATE^HLTF0.
      
    • 85 SEQ #78
      DATE APPLIED:   2002-06-05 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the Forum patch text on patch HL*1.6*85 for patch information.
      
    • 87 SEQ #79
      DATE APPLIED:   2002-06-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Associated Patches:  This patch requires that KIDS build HL*1.6*77 be 
               ISH-0900-40469   re-transmissions for a message awaiting an ack
             (Note that links that do not have "autostart" enabled will need
             to be restarted manually.)
       
             AXP/DSM SITES ONLY: If you previously disabled an HL7 UCX Service
             for this installation, you may enable it now.
       
         7.  AXP/DSM Sites:  After the patch has been installed, rebuild your
             map set, if necessary.
       
         8.  Start Link Manager using the 'TCP Link Manager Start/Stop [HL
       
             START/STOP LINK MANAGER]' menu option. 
      This patch fixes the problem where a TCP client logical link and its 
      corresponding listener logical link lose synchronization.  Loss of 
      synchronization creates excessive retransmission of messages and their 
      acknowledgements, causing side effects: one is that the client link gets 
      stuck in a "Reading" state because its TCP receive buffer fills up; 
      another is that the disk on both the sending and the receiving sides 
      fills up at a faster rate.
       
                           installed.
      This patch makes corrections in the way the TCP client logical link 
      retransmits a message when its corresponding acknowledgement does not 
      arrive in time or receives an incorrect acknowledgement.  Previous HL7 
      code allowed the logical link to retransmit a message when the 
      acknowledgement message was incorrect, including an "incorrect msg id" 
      acknowledgement.  This patch corrects the code to allow retransmission of 
      a message only when the logical link does not receive an acknowledgement 
      in time (timed out) and ignores incorrect acknowledgements.
       
      Routine Information:
       
      =====================
       
      The following routine is included in this patch.  The second line of the 
      routine now looks like this:
       
      ;;1.6;HEALTH LEVEL SEVEN;**19,43,49,57,63,64,66,67,76,77,87**;JUL 17,1995.
       
      The VA Kernel checksums for this routine (calculated using 
      CHECK^XTSUMBLD) are listed below:
       
      Test sites:    Oklahoma City VAMC, Muskogee VAMC, San Francisco VAMC
        Routine     Checksum        Checksum        
        Name        Before Patch    After Patch     
        ========    ============    ===========     
        HLCSTCP2    12129232        12913767 
       
        Patch List
        =====================
        **19,43,49,57,63,64,66,67,76,77,87**;
       
      Sites should use CHECK^XTSUMBLD to verify checksums after the patch
       
      has been installed.
       
      Installation Instructions:
       ==========================
       
         1.  Users are allowed to be on the system during the installation.
       
         2.  AXP/DSM SITES: Review your mapped routine set.  If any of the
             routines listed in the ROUTINE SUMMARY section are mapped, they
             should be removed from the mapped set at this time.
      NOIS:    OKL-1201-70586   VA* Logical Links not transmitting
       
         3.  Shutdown all Logical Links, incoming and outgoing filers, and
             the Link Manager using the Filer and Link Management options
             listed below:
       
               Stop All Messaging Background Processes [HL STOP ALL]
               TCP Link Manager Start/Stop [HL START/STOP LINK MANAGER]
       
             AXP/DSM SITES ONLY: Disable all HL7 UCX Services for this
             installation.
               ISF-0700-62124   Duplicate Entries for messages
       
         4.  Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
             option will load the KIDS package onto your system.
       
        5.  This patch is now loaded into a transport global on your
             system. The next step is to use KIDS to install the Transport
             global. To do this, use the 'Installation [XPD INSTALLATION 
             MENU]' menu.  You should use each of the following 'Installation'
             menu options in the order shown below:
       
               SDC-0301-60090   Message stuck in 'Awaiting ACK' status
               Verify Checksums in Transport Global
               Print Transport Global
               Compare Transport Global to Current System
               Backup a Transport Global
               Install Package(s)
       
             When using the 'Install Package(s)' menu option to install 
             the patch build, you will be asked several questions.  The 
             questions asked, and the answers you should supply, are 
             shown below.
               ISF-0400-62120   Excessive Retransmissions
       
               INSTALL NAME: <HL*1.6*87>
               Want KIDS to INHIBIT LOGONS during the install?  <NO>
               Want to DISABLE Scheduled Options, Menu Options, and
               Protocols?  <NO>
       
         6.  Start up all Logical Links and incoming and outgoing filers using
             the Filer and Link Management Option's 'Restart/Start All Links
             and Filers [HL TASK RESTART]' menu option.
       
      
    • 95 SEQ #80
      DATE APPLIED:   2002-08-14 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*95 in the National Patch Module for complete information 
      on this patch.
      
    • 94 SEQ #81
      DATE APPLIED:   2002-08-14 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See the full patch description for HL*1.6*94 on the national Forum patch
      module system. 
      
    • 99 SEQ #82
      DATE APPLIED:   2002-11-22 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*99 in the National Patch Module for complete information 
      on this patch.
      
    • 100 SEQ #83
      DATE APPLIED:   2002-11-22 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*100 in the National Patch Module for complete information
      on this patch.
      
    • 88 SEQ #84
      DATE APPLIED:   2002-12-20 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*88 in the National Patch Module for complete information
      on this patch.
      
    • 25 SEQ #18
      DATE APPLIED:   1997-03-21 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch is used to fix the problems described in NOIS calls: 
      - catch the erroneous client message entry with  illegal message type.
          
      It will fix the problems for the incoming filer as follows:
       -mock MSA segment error when a batch message is received.
       -missing original outgoing message of the incoming message error.
       -missing Event Type Protocol pointer error.
        
         
      ROUTINE INFORMATION 
      ====================
      HUN-0297-21666, LEX-0297-41531, BAC-0297-40046, IND-0197-42390,
        
      The following routines are included in this patch.  The second line of
       these routines now look like:
         
         <tab>;;1.6;HEALTH LEVEL SEVEN;**Patch List**;Oct 13, 1995
       
                    CHECK^XTSUMBLD results
         
         Routine Name     Before Patch     After Patch       Patch List
         ------------     ------------     -----------       ----------
      JAC-0297-71674, MAR-0297-20929, etc. The filers erred out abnormally when
          HLCSOUT           3686510          4104234             25
          HLTF1            13439654          9700889          5,8,22,25
          HLTF2               N/A            4516843             25
          HLTP0             3059568          3059585             25
          HLTP01            3988246          3987933            2,25
          HLTPCK1A         10899550          9629334            2,25
           
           
      INSTALLATION INSTRUCTIONS 
      =========================
      unexpected data were encountered. This patch will catch these unexpected
      1. Users may remain on the system during the installation of this 
         patch. 
      2. Shut down all the incoming and outgoing filers by using the 
         options: 'Stop all incoming filers' and 'Stop all outgoing filers'
      3. For mapped AXP sites, disable mapping for these routines.
      4. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This 
         option will load the KIDS package onto your system.
      5. On the KIDS menu, under the 'Installation' menu,
         use the following options:
       
      data to prevent these errors.
                  Print Transport Global 
                  Compare Transport Global to Current System 
                  Verify Checksums in Transport Global 
                  Backup a Transport Global 
       
      6. On the KIDS menu, under the 'Installation' menu, use the following 
         option: 
           Select Installation Option: Install Package(s) 
                                       ================
           Select INSTALL NAME: HL*1.6*25 
        
                                =========
           Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options, 
           and Protocols?'. 
      7. MSM Sites - Answer 'YES' to the question 'Want to
         MOVE routines to other CPUs?'.  
         Then enter the names of your other Compute and Print server(s).  
      8. AXP Sites - After the patch has been installed, rebuild your map 
         set. 
      9. Restart the incoming and outgoing filers.
      It will fix the problems for the outgoing filer as follows:
       -catch the erroneous client message entry with incorrect Logical Link.
       -catch the erroneous client message entry with parent message missing.
      
    • 98 SEQ #85
      DATE APPLIED:   2002-12-20 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*98 in the National Patch Module for complete information 
      on this patch.
      
    • 93 SEQ #86
      DATE APPLIED:   2003-05-20 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*93 description on Forum for full instructions and 
      information.
      
    • 101 SEQ #87
      DATE APPLIED:   2003-05-20 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please refer to the Description in the FORUM Patch Module for details.
      Patch HL*1.6*101.
      
    • 103 SEQ #88
      DATE APPLIED:   2003-06-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*103 in the National Patch Module for complete information
      on this patch.
      
    • 96 SEQ #89
      DATE APPLIED:   2003-06-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      see build description in the Patch description section.
      
    • 107 SEQ #90
      DATE APPLIED:   2003-08-13 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see patch HL*1.6*107 description on Forum for full instructions and
      information.
      
    • 84 SEQ #91
      DATE APPLIED:   2004-03-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*84 in the National Patch Module for complete information 
      on this patch.
      
    • 109
      DATE APPLIED:   2004-03-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*109 in the National Patch Module for complete information
      on this patch.
      
    • 115 SEQ #93
      DATE APPLIED:   2004-03-30 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the patch description in the National Patch Module for a complete
      description of this patch.
      
    • 108 SEQ #94
      DATE APPLIED:   2004-05-07 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See description for patch HL*1.6*108 in the National Patch Module for
      complete information on this patch.
      
    • 26 SEQ #20
      DATE APPLIED:   1997-06-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
      HL*1.6*26
           8.   Rebuild your mapped set if necessary.
      Recognize 'out-of-order' server protocols
       
      Category:
      =======
      *     Routine
           Enhancement (Mandatory)
      *     Data Dictionary
           Sort Template
       
      Prerequisites:
       
      Description:
      =========
      This patch enables recognition of HL7 Server Protocols that have been
      placed out of order as well as those Server Protocols that have no
      clients. This information is returned to the HL7 calling application as an
      error message while calling the entry point, INIT^HLFNC2. Two new error
      messages have been added to file 771.7, HL7 ERROR MESSAGE. They are:
       
      CODE: 15                                SHORT TEXT: No client
      =========== 
      DESCRIPTION:   No clients are defined for this server protocol. Unless the
      application intends to submit a specific client using the HLL("LINKS")
      array, this message should not be sent.  
       
       
      CODE: 16                                SHORT TEXT: Server Protocol
      Disabled
      DESCRIPTION:   The server protocol has been placed OUT OF SERVICE. The
      message has been rejected by the HL7 Message Service. The sending
      application must retain the message for later transmission.  
           None
       
       
       
       
       
       
      Test Sites :
      ==============
      Requested by CIRN Developers
       
       
      Routine Summary :
      ==============
               <tab ;;1.6;HEALTH LEVEL SEVEN;**2,26**;Oct 13, 1995
       
      Routine Name                      Patch List
      -----------------               --------------
      HLFNC2                                 2,26
       
      Checksums:
      =========
       
        Rtn Nm           Chksum Before      Chksum After        
       HLFNC2                5211111         5393929
                                  
      FROM CHECK^XTSUMBLD    
       
           To test if the transport has been corrupted, you can use the 
           "Verify Package Integrity" option.  This option is under Utilities 
           under the KIDS menu.  It will compare the checksums in the build 
           with the current checksums and list any that differ.
       
      Subject:
       
      Installation Instructions:
      ===================
       
      NOTE any instructions that are different for 486 or Alpha sites.
       
           1.   Users ARE allowed to be on the system during the 
                installation. 
           2.   You DO NOT need to place TaskMan in a WAIT/STOP state.  
           3.   Review your mapped set. If any of the routines listed in the
      ======
                Routine Summary section are mapped, they should be removed from
                the mapped set at this time.
           4.   Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. 
                This option will load the KIDS package onto your system.  
           5.   The patch has now been loaded into a Transport global on your 
                system. You now need to use KIDS to install the Transport
                global.
           6.   On the KIDS menu, under the 'Installation' menu, use the
                following options:
       
          
                 Verify Checksums in Transport Global
                 Print Transport Global 
                 Compare Transport Global to Current System 
                 Backup a Transport Global
                 Install Package(s) 
                 INSTALL NAME: HL*1.6*26
           7.   MSM Sites - Answer YES to the question 'Want to MOVE 
           routines to other CPUs?'. Enter the names of your Compute and 
           Print server(s).
           AXP Sites - Answer NO to this question.
      
    • 116 SEQ #95
      DATE APPLIED:   2004-08-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the patch description on Forum, in the National Patch Module.
      
    • 114 SEQ #96
      DATE APPLIED:   2004-11-11 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See patch HL*1.6*114 in the National Patch Module for complete information
      on this patch.
      
    • 117 SEQ #97
      DATE APPLIED:   2004-12-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the patch description on Forum, in the National Patch Module.
      
    • 125 SEQ #98
      DATE APPLIED:   2005-02-12 00:00:00
      APPLIED BY:   USER,ONE
    • 123 SEQ #99
      DATE APPLIED:   2005-09-05 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the patch description on Forum, in the National Patch Module.
      
    • 118 SEQ #100
      DATE APPLIED:   2005-09-24 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      HL7 parsing utilities.
      
    • 126 SEQ #101
      DATE APPLIED:   2005-10-20 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      HL7 2.0
      
    • 130 SEQ #102
      DATE APPLIED:   2006-01-12 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the NPM on Forum for a complete description.
      
      
    • 120 SEQ #103
      DATE APPLIED:   2006-05-26 00:00:00
      APPLIED BY:   USER,ONE
    • 131 SEQ #104
      DATE APPLIED:   2006-06-08 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      
      
      
      
    • 28 SEQ #21
      DATE APPLIED:   1997-06-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      More control over Inbound/Outbound Filer processes
      
    • 133 SEQ #105
      DATE APPLIED:   2006-09-23 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See the NPM for a complete description of this patch.
      
      
    • 132 SEQ #106
      DATE APPLIED:   2007-06-27 21:41:15
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See the National Patch Module on Forum.
      
      
    • 134 SEQ #107
      DATE APPLIED:   2007-09-04 23:36:58
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the National Patch Module for a full description.
      
      
      
    • 136 SEQ #108
      DATE APPLIED:   2007-09-04 23:48:54
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      HLO Purge Settings
      
      
    • 122 SEQ #109
      DATE APPLIED:   2008-02-03 22:36:29
      APPLIED BY:   USER,ONE
    • 137 SEQ #110
      DATE APPLIED:   2008-05-26 19:14:26
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See the NPM for the description.
      
      
    • 141 SEQ #111
      DATE APPLIED:   2008-07-22 14:48:55
      APPLIED BY:   USER,ONE
    • 140 SEQ #112
      DATE APPLIED:   2009-04-21 13:47:06
      APPLIED BY:   USER,SEVENTEEN
    • 138 SEQ #113
      DATE APPLIED:   2009-04-22 12:05:50
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Patch HL*1.6*138 corrects several minor problems with HL7 OPTIMIZED (HLO)
      and provides several new features.
      
    • 142 SEQ #114
      DATE APPLIED:   2009-06-30 11:20:07
      APPLIED BY:   USER,SEVENTEEN
    DATE INSTALLED AT THIS SITE:   1996-06-13 00:00:00
DESCRIPTION
This package is a generic implementation the Health Level Seven (HL7)
protocol for use by all DHCP applications.  The HL7 protocol provides a
single, standard interface between computer systems for the exchange of
clinical information.
FILE
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  • FIELD:
    • TYPE
    • APPLICATION ACK TYPE
    • VERSION ID
    • GENERATE/PROCESS ROUTINE
    • GENERATE/PROCESS ACK ROUTINE
    • SENDING FACILITY REQUIRED?
    • RECEIVING FACILITY REQUIRED?
    • DATE/TIME OF MESSAGE REQUIRED?
    • SECURITY REQUIRED?
    • MESSAGE TYPE GENERATED
    • SERVER APPLICATION
    • CLIENT (SUBSCRIBER)
    • MESSAGE TYPE RECEIVED
    • EVENT TYPE
    • PRIORITY
    • PROCESSING ID
    • LOGICAL LINK
    • ACCEPT ACK CODE
    UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   MERGE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
POST-INITIALIZATION ROUTINE HLPOST
POST-INIT COMPLETION DATE 1996-06-13 11:57:47
PRE-INIT AFTER USER COMMIT HLPRE16
PRE-INIT COMPLETION DATE 1996-06-13 11:55:31
EXCLUDED NAME SPACE
  • HLZ