| VERSION |
-
- 1.5
- DATE DISTRIBUTED: 2005-11-19 00:00:00
- PATCH APPLICATION HISTORY:
-
-
- 24 SEQ #22
- DATE APPLIED: 1997-04-09 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Once installation of this patch is complete, should your site continue to
receive Second/Third Period of Service errors, patient data will have to
be re-Requested/Unsolicited. This is due to the Period of Service fields
having a value of null when transmitted. Routine has been properly
corrected to include a 'Yes' or 'No' value when transmission occurs.
ROUTINE SUMMARY:
================
Below is the routine included in this patch. The second line of this
1. When extracting the PDX*MAS data segment, all data pertaining to the
routine will look like:
<tab>;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
CHECK^XTSUMBLD results
ROUTINE NAME BEFORE PATCH AFTER PATCH PATCH LIST
============= ============= ============ ==========
VAQDBII1 2772903 2817374 13,24
patient's PERIOD OF SERVICE was not able to upload using the LD or LF
INSTALLATION INSTRUCTIONS
==========================
1. This patch can be loaded with users on the system. Installation
will take less than 5 minutes. Use the INSTALL/CHECK MESSAGE
option on the PackMan menu. This option will load the KIDS package
onto your system.
2. Review your mapped set. If any of the routines listed in the
of the LOAD/EDIT. Routine VAQDBII1 has been modified to correct this
ROUTINE SUMMARY section are mapped, they should be removed from the
mapped set at this time.
3. From the Kernel Installation and Distribution System Menu,
Select the Installation menu.
4. From this menu, you may elect to use the following options
(when prompted for INSTALL NAME, enter VAQ*1.5*24):
==========
problem. This was reported in NOIS CAN-0595-10112.
a. Backup a Transport Global - this option will create a backup
message of any routines exported with the patch. It will NOT
backup any other changes such as DDs or templates.
b. Compare Transport Global to Current System - this option will
allow you to view all changes that will be made when the patch is
installed. It compares all components of the patch (routines, DDs,
templates, etc.).
c. Verify Checksums in Transport Global - this option will allow
you to ensure the integrity of the routines that are in the
transport global.
5. Use the Install Package(s) option and select the package
VAQ*1.5*24
==========
6. When prompted 'Want to DISABLE Scheduled Options, Menu Options,
and Protocols? YES//', respond YES. When prompted to select the
===
options you would like to place out of order, enter the following:
VAQ (MENU) MAIN Patient Data Exchange
===============
7. MSM sites: Please ensure you answer YES when asked if you want
to move the routines to other systems and indicated the appropriate
IMPORTANT NOTICE:
CPUs.
8. If routines were unmapped as part of step 2, they should be
returned to the mapped set once the installation has run to
completion.
=================
-
- 35 SEQ #32
- DATE APPLIED: 2002-01-16 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*35
This patch also provides a double-check to ensure that no transactions
are sent to closed sites. Any such requests will be marked for purge.
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch VAQ*1.5*29.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQADM50 4268774 5135296 5,35
VAQEXT01 5668219 6188779 14,35
VAQUTL97 1499668 1906264 2,9,29,35
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
NOIS FAV-1001-70165, MWV-1201-20937
==========================================================================
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch VAQ*1.5*29.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
Test Sites: Fayetteville, AR; Martinsburg, WV
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*35 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
This patch prevents the option VAQ PDX PROCESS EXTERNAL from displaying
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
==========================================================================
to the user any external requests from closed sites. Any such requests
will be marked for purge.
-
- 37 SEQ #33
- DATE APPLIED: 2002-01-16 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*37
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It has no patch prerequisite.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQUTL96 370770 419526 37
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
NOIS MAD-1201-42417
is at a minimum. It has no patch prerequisite.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Test Site: Madison, WI
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*37 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
If two (or more) PDX patients share the same first initial of the last name
==========================================================================
and the same last 4 digits of the SSN, PDX will only show the first patient
when attempting to Load/Edit PDX Transactions based on patient name.
This patch fixes that.
-
- 36 SEQ #34
- DATE APPLIED: 2002-02-04 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*36
corrupted .01 fields will not adversely affect NHE or any its data.
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch VAQ*1.5*34.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQUTL92 2986759 2983392 6,36
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
INSTALLATION:
NOIS ANC-1201-51582
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch VAQ*1.5*34.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
Test Site: Anchorage, AK
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*36 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
Patch VAQ*1.5*30 caused some corrupted .01 fields in file 394.62. Patch
necessary.
==========================================================================
VAQ*1.5*34 stopped further corruption. (Please see the description in
patch VAQ*1.5*34 for an explanation of the corruption.) The corruption
cannot be undone, but it can be ignored. This patch ensures that the
-
- 38 SEQ #35
- DATE APPLIED: 2002-09-06 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*38
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It has no patch prerequisite.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQDBIM 4078867 4144431 38
VAQDBIM4 3774719 4191649 38
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
NOIS MAD-1001-42696
is at a minimum. It has no patch prerequisite.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Test Sites: Madison, WI; Milwaukee, WI; Tomah, WI; Iron Mountain, MI
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*38 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
If a veteran declines to give income information, PDX should display the
==========================================================================
means test as CAT C. Instead, PDX may display it as CAT A. This patch
fixes that.
-
- 39 SEQ #36
- DATE APPLIED: 2002-10-25 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*39
unnecessary and are probably the cause of the problems. After the patch
is installed, duplicate transaction numbers should no longer be created.
Feel free to delete the pre-init, ^VAQPRE39, after installation.
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It has no patch prerequisite.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQPRE39 * NEW * 268564 39
* Checksums produced by CHECK^XTSUMBLD
This patch introduces the following new routine:
VAQPRE39 has no user-callable entry points and may be deleted after the
NOIS TNV-0902-30675 (Remedy Ticket HD8627/CHG2933)
patch has been installed.
==========================================================================
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It has no patch prerequisite.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
Test Sites: Tennessee Valley HCS
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*39 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
Duplicate transaction numbers in file VAQ - TRANSACTION (#394.61) continue
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
==========================================================================
to be a problem. The pre-init for this patch deletes the triggers on the
TRANSACTION NUMBER (#.01) field in file VAQ - TRANSACTION (#394.61) and
DATA (#.01) field in file VAQ - DATA (#394.62). These triggers are
-
- 40 SEQ #37
- DATE APPLIED: 2003-02-04 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*40
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires PDX patches VAQ*1.5*22 and *24. KIDS will
not check for the existence of these patches, because they pre-date KIDS.
The site is responsible for performing the check.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQDBII1 2817374 2861649 13,24,40
VAQDIS30 5471356 6429479 13,22,40
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
NOIS MAD-0103-41237
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires PDX patches VAQ*1.5*22 and *24. KIDS will
not check for the existence of these patches, because they pre-date KIDS.
The site is responsible for performing the check.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
Test Sites: Madison, Milwaukee, Tomah, & Iron Mtn
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*40 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
This patch adds Yugoslavia service and Purple Heart information to the
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
==========================================================================
PDX*MAS data which PDX extracts from the PATIENT file and displays on
screen 6.
-
- 43 SEQ #38
- DATE APPLIED: 2004-08-02 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
This patch will prevent a new patient from being added to the Patient (#2)
file if an existing patient with the same SSN exists. It also corrects a
DR variable leak.
-
- 42 SEQ #39
- DATE APPLIED: 2005-02-04 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*42
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch IB*2.0*267. It also requires patch
VAQ*1.5*13. (KIDS will not check for this patch because it predates KIDS.
You must check manually.)
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQDBIP7 3165540 11036802 13,42
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
NOIS: none
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch IB*2.0*267. It also requires patch
VAQ*1.5*13. (KIDS will not check for this patch because it predates KIDS.
You must check manually.)
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
Test Sites: Oklahoma City, OK; Madison, WI; Milwaukee, WI; Tomah, WI;
4. You do not need to stop TaskMan.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*42 Loaded from Distribution <date/time>
Montana HCS
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
==========================================================================
This patch alters PDX to use the new API from IB (Integrated Billing),
introduced in patch IB*2.0*256, to access billing (insurance) data.
-
- 41 SEQ #40
- DATE APPLIED: 2005-06-25 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*41. Please refere to the Description in Forum Patch Module
for details.
-
- 44 SEQ #41
- DATE APPLIED: 2014-01-08 15:25:50
- APPLIED BY: USER,SEVENTEEN
- DESCRIPTION:
This patch addresses 2 issues with Patient Data Exchange (PDX):
1) Issues adding users to notify for PDX transactions
2) <UNDEFINED> errors occurring due to invalid Health Summary
Component entries.
-
- 26 SEQ #24
- DATE APPLIED: 1999-12-10 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
1. Y2K Waiver Request ID#:Y2KW0001 Y2K Waiver Status: Approved
until creation of IEN and Transaction number.
Test Sites:
==========
Brockton, MA - 525
Nashville, TN - 626
Eastern Kansas HCS - 677
This patch may be installed during the Y2K Moratorium, either
Routine Summary:
===============
The following routine(s) are included in this patch. The second line of
each routine will look like:
<tab>;;1.5;PATIENT DATA EXCHANGE;**[Patch List}**;Nov 17, 1993
Checksums: CHECK^XTSUMBLD
=========
BEFORE 12/15/99 or AFTER 1/15/2000. This patch MAY NOT be
Rtn Nm Chksum Before Chksum Patch List
------------------------------------------------------------------
VAQFILE 3704729 3884670 22,26
VAQREQ06 5069886 4782978 4,16,20,22,26
Installation Instruction:
========================
1. This patch can be loaded with users on the system.
installed between 12/15/99 and 1/15/2000(the Y2K Lockdown Period).
2. Routine mapping is NOT recommended for these routines. If you are
using routine mapping, review your mapped set and ensure that these
routines are NOT in your mapped routine before proceeding and rebuild
your map set afterward before reactivating TaskMan.
3. Use the "INSTALL/CHECK MESSAGE" option on the PackMan menu. This
will load the KIDS package into your system.
4. The patch has now been loaded into a transport global and you will
use KIDS to install the transport global. On the KIDS menu, under the
'Installation' menu, use the following options
2 Verify Checksums in Transport Global
3 Print Transport Global
4 Compare Transport Global to Current System
5 Backup a Transport Global
6 Install Package(s)
INSTALL NAME: VAQ*1.5*26
==========
BRK-0596-12069,EKH-0498-42577,EKH-1298-40432,NAS-0998-32328.
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? NO
==
5. If routines were unmapped as part of step 2, they should be returned
to the mapped set once the installation has run to completion.
Several sites have indicated that VAQ-TRANSACTION FILE(394.61)
periodically creates duplicate Transaction numbers. Routines
VAQFILE and VAQREQ06 have been revised to ensure Lock of file
-
- 46
- DATE APPLIED: 2023-10-26 09:46:06
- APPLIED BY: USER,EIGHTYNINE
- DESCRIPTION:
Refer to the patch description for an explanation of the changes included
in this patch.
-
- 28 SEQ #25
- DATE APPLIED: 2000-02-29 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
1. Y2K Waiver Exemption ID#:Y2KWE0034
Test Sites:
==========
Cleveland, OH - 541
Columbus, OH(OPC) - 757
Routine Summary:
===============
This patch may be installed at any time during the Y2K Moratorium
The following routine(s) are included in this patch. The second line of
each routine will look like:
<tab>;;1.5;PATIENT DATA EXCHANGE;**[Patch List}**;Nov 17, 1993
Checksums: CHECK^XTSUMBLD
=========
Rtn Nm Chksum Before Chksum Patch List
------------------------------------------------------------------
(including the 12/15/99 thru 1/15/2000 Y2K lockdown).
VAQFILE 3884670 3917792 22,26,28
Installation Instruction:
========================
1. This patch can be loaded with users on the system.
2. Routine mapping is NOT recommended for these routines. If you are
using routine mapping, review your mapped set and ensure that these
routines are NOT in your mapped routine before proceeding and rebuild
your map set afterward before reactivating TaskMan.
3. Use the "INSTALL/CHECK MESSAGE" option on the PackMan menu. This
will load the KIDS package into your system.
4. The patch has now been loaded into a transport global and you will
use KIDS to install the transport global. On the KIDS menu, under the
'Installation' menu, use the following options
2 Verify Checksums in Transport Global
CLE-1199-42576,COS-1299-40012.
3 Print Transport Global
4 Compare Transport Global to Current System
5 Backup a Transport Global
6 Install Package(s)
INSTALL NAME: VAQ*1.5*28
==========
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? NO
Several sites has indicated that PDX is unable to store data into
==
5. If routines were unmapped as part of step 2, they should be returned
to the mapped set once the installation has run to completion.
workload file #394.87, due to an undefine variable error. Routine
VAQFILE has been revised to correct this problem.
-
- 29 SEQ #26
- DATE APPLIED: 2000-11-06 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Description:
============
NOIS: ISA-0700-12514, NOL-0700-72818
Sites had reported that PDX is generating error
messages because of unable to find the correct
Domain name from the Domain file. The problem that
is causing this is that the pointer is using B
cross reference. Routines are modified to point at
C cross reference.
List of Test Sites:
==================
New Orleans, Montana
ROUTINE SUMMARY
Subject:
===============
The following routines are included in this patch. The
second line of each of these routines now looks like:
<tab>;;1.5;PATIENT DATA EXCHANGE;**[patch list**; Date
Routine Name Chksum Before Chksum After Patch List
------------ ------------- ------------ ----------
Correcting wrong cross reference
VAQUTL97 1469891 1499668 2,9,29
VAQUTL99 2220508 2284414 2,10,29
* From CHECK^XTSUMBLD
Installation Instructions:
==========================
1. Users ARE allowed to be on the system during the installation.
2. DSM/AXP sites: Review your mapped routine set. If any of the
routines in the Routine Summary section are mapped, disable
mapping for the affected routine.
3. Use the "INSTALL/CHECK MESSAGE" option on the PackMan menu.
This loads the patch into a Transport Global onto your system.
4. You DO NOT need to stop TaskMan or the background filers.
5. On the KIDS menu, select the "Installation" menu and use the
following options to install the Transport Global:
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Category:
Install Package(s)
INSTALL NAME: VAQ*1.5*29
==========
Want KIDS to INHIBIT LOGONs during the install? YES// NO
====
Want to DISABLE Scheduled Options, Menu Options, and
Protocols? NO//
==
Routine
6. DSM/AXP Sites - Answer NO to the question "Want to MOVE
routines to other CPUs?"
7. DSM/AXP sites: If the routines were unmapped, the mapped
set should be rebuilt once the installation has run
to completion.
.
-
- 32 SEQ #27
- DATE APPLIED: 2001-11-06 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*32
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch VAQ*1.5*28.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQFILE 3917792 3972067 22,26,28,32
VAQREQ06 4782978 4486600 4,20,26,32
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
NOIS CLE-0701-40883
is at a minimum. It requires patch VAQ*1.5*28.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Test Site: Cleveland, OH
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*32 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
This patch stops PDX from locking file 394.61 when $$NEWTRAN^VAQFILE is
==========================================================================
called to add a new record to the file. ^DIC provides the appropriate
locking, so PDX doesn't have to.
-
- 31 SEQ #28
- DATE APPLIED: 2001-11-21 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*31
Adverse Reaction Tracking released a patch, GMRA*4*10, which changed the
data returned by EN1^GMRADPT if the patient has NKA.
Before the patch, the API returned:
GMRAL=0
GMRAL(<ptr to file 120.8>)=DFN_"^NKA^0^1"
After the patch, the API returned:
GMRAL=0
PDX used to grab "NKA" from the GMRAL array. After GMRA*4*10, there was
nothing to grab. This patch, VAQ*1.5*31, ensures that PDX recognizes that
GMRAL=0 means "NKA".
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It has no patch pre-requisite requirement.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
NOIS ISL-1198-52170
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQDBIP1 4400113 5323185 31
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
Test Site: Oklahoma City
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It has no patch pre-requisite requirement.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*31 Loaded from Distribution <date/time>
==========
This patch enables PDX to recognize and report on NKA (No Known Allergy)
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
when using the API EN1^GMRADPT, provided by the Adverse Reaction Tracking
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
==========================================================================
package.
-
- 30 SEQ #29
- DATE APPLIED: 2001-11-21 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
HIN-0701-42706, OKL-0701-70784
Test Sites: Oklahoma City, OK; Asheville, NC; Central Plains HCS
This patch prevents the sending of PDX messages to closed domains in two
ways.
1. Prevents the addition of closed domains to outgoing groups:
Screens are placed on 2 fields in the REMOTE FACILITY multiple
in file 394.83, VAQ - OUTGOING GROUP. The fields are .01 REMOTE FACILITY
and .02 REMOTE DOMAIN. For both of these, the DOMAIN file is checked
This patch requires PDX patch VAQ*1.5*22. KIDS will not check
to ensure that the domain is not closed. If it is, the screen fails
and you are prevented from adding the remote facility to the outgoing group.
2. Removes closed domains from outgoing groups:
When PDX messages to outgoing groups are being built, the DOMAIN file is
checked to ensure that the domain is not closed. If it is, the remote
facility is deleted from the outgoing group, and the PDX message is not
sent to that domain.
NOTE: This patch should be installed during off hours, when user activity
for the existence of this patch, because it pre-dates KIDS.
is at a minimum. It requires PDX patch VAQ*1.5*22. KIDS will not check
for the existence of this patch, because it pre-dates KIDS. The site is
responsible for performing the check.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
The site is responsible for performing the check.
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQREQ03 3858669 4459512 22,30
VAQREQ05 4065406 4263629 30
VAQXRF2 2617277 3203802 30
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires PDX patch VAQ*1.5*22. KIDS will not check
for the existence of this patch, because it pre-dates KIDS. The site is
responsible for performing the check.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*30 Loaded from Distribution <date/time>
Patch VAQ*1.5*30
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
==========================================================================
NOIS CHY-0201-51534, ASH-0501-32739, CPH-0501-40775, BHS-0601-10382,
-
- 34 SEQ #30
- DATE APPLIED: 2001-12-10 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*34
It is evidenced by the following:
>D ^%G
Global ^VAT(394.86
VAT(394.86
^VAT(394.86,0) = VAQ - AUTO-NUMBERING^394.86^1^1
^VAT(394.86,1,0) = 1
^VAT(394.86,1,1) = 390
^VAT(394.86,1,2) = "1" <----- corrupted
^VAT(394.86,1,3) = 8
^VAT(394.86,"B",1,1) =
and by:
Global ^VAT(394.62,466
VAT(394.62,466
^VAT(394.62,466,0) = "1" <----- corrupted
...
^VAT(394.62,"B","""1""",466) = <----- corrupted
NOIS BIR-1101-31486
This patch fixes that, and cleans up the corruption in file 394.86.
It can't fix PDXs which were adversely affected. It can't fix file 394.62.
The PDXs will have to be resent, or the data entered manually, if necessary.
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch VAQ*1.5*30.
==========================================================================
ROUTINES:
Test Site: Birmingham, AL
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQFILE1 4265693 4507302 22,34
VAQPRE34 * NEW * 148728 34
* Checksums produced by CHECK^XTSUMBLD
This patch introduces the following new routine:
VAQPRE34 - pre-init has no user-callable entry points
==========================================================================
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It requires patch VAQ*1.5*30.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
Patch VAQ*1.5*30 exposed a problem which was not caught during its
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
extensive testing period. It was not caught until it was released.
Install Package(s)
Select INSTALL NAME: VAQ*1.5*34 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
We're very sorry about that.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
==========================================================================
-
- 33 SEQ #31
- DATE APPLIED: 2001-12-10 00:00:00
- APPLIED BY: USER,ONE
- DESCRIPTION:
Patch VAQ*1.5*33
group G.VAQ PDX ERRORS to inform them of this.
NOIS WBP-0596-21007
Test Site: Wilkes Barre, PA
This patch ensures that incoming PDX messages are deleted from the server
basket, whether they processed successfully or errored out.
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It has no patch pre-requisites.
==========================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.5;PATIENT DATA EXCHANGE;**[patch list]**;NOV 17, 1993
Before After
Name Checksum Checksum Patch List
-----------------------------------------------------------------
VAQADM2 2534049 3075526 33
NOIS SBY-0801-31431, FAV-1001-70165, COS-1001-40729, MAR-1001-20783
* Checksums produced by CHECK^XTSUMBLD
This patch introduces no new routines.
==========================================================================
INSTALLATION:
NOTE: This patch should be installed during off hours, when user activity
is at a minimum. It has no patch pre-requisites.
1. Users may be on the system during installation of this patch.
2. DSM Sites: If any of these routines is mapped, disable mapping for the
Test Site: Salisbury, NC; Fayetteville, AR; Columbus, OH
affected routine(s).
3. On the PackMan menu, use the 'INSTALL/CHECK MESSAGE' option.
This loads the patch into a Transport Global on your system.
4. You do not need to stop TaskMan or the background filer.
Users may be on the system.
5. On the KIDS:Installation menu, use the following options to install
the Transport Global.
Verify Checksums in Transport Global
Print Transport Global
Compare Transport Global to Current System
Backup a Transport Global
Install Package(s)
Select INSTALL NAME: VAQ*1.5*33 Loaded from Distribution <date/time>
==========
Install Questions:
Want KIDS to INHIBIT LOGONs during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
This patch checks PDX requests from remote sites to ensure that the remote
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <It's up to you. You may queue it if you wish.>
------------------------------------------------
6. DSM Sites: After patch has installed, rebuild your map set, if
necessary.
==========================================================================
site is not flagged as Closed in the Domain file. If the Domain file shows
that the site is closed, then the request is ignored, the message is
deleted from the server basket, and a message is sent to the members of the
- DATE INSTALLED AT THIS SITE: 1996-07-22 00:00:00
|
