| DESCRIPTION OF ENHANCEMENTS |
This patch
with HL*1.6*39. If this is the case, it is important to insure that the
links on both the sending and receiving systems are properly configured
and enabled.
If there is no routing logic defined on the subscriber protocol, Vista HL7
will assume that the link defined on the subscriber protocol is the
correct return path and Mailman will not be queried.
2. Fixes a corrupted node found on the logical link, LR NCH-L which
prevented patch HL*1.6*57 from converting this link.
1. Resolves an issue with how to address responses to messages
The following routines are included in this patch. The second line of
each of these routines now looks like:
;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
CHECK^XTSUMBLD results:
Routine Name Before Patch After Patch Patch List
============ ============ =========== ==========
arriving over a Mailman-type Logical Link.
HLTP01 5262489 5578885 **2,25,34,47,60**
HLPAT60 **NEW** 805414
Installation Instructions:
==========================
1. Users are allowed to be on the system during the installation.
2. DSM SITES: Review your mapped set. If any of the routines listed in
the Routine Summary section are mapped, they should be removed from
the mapped set at this time.
3. Shutdown all Logical Links and incoming and outgoing filers, and
the Link Manager. Use the options:
Shut Down All Logical Links
Stop all incoming filers
Stop all outgoing filers
TCP/IP Link Manager Start/Stop
If ROUTING LOGIC is defined, the response will be dynamically addressed
4. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
option will load the KIDS package onto your system.
5. The patch has now been loaded into a Transport global on your
system. You now need to use KIDS to install the Transport global.
On the KIDS menu, under the 'Installation' menu, use the following
options:
2 Verify Checksums in Transport Global
using the SOURCE DOMAIN provided by querying Mailman. In some cases this
3 Print Transport Global
4 Compare Transport Global to Current System
5 Backup a Transport Global
6 Install Package(s)
INSTALL NAME: HL*1.6*60
=========
Answer 'YES' to 'Want KIDS to Rebuild Menu Trees upon Completion
of Install?'.
could result in a response being returned over a logical link that is
Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.
Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
and Protocols?'.
6. Startup all Logical Links and incoming and outgoing filers. Use the
'Restart/Start All Links and Filers' option.
For DSM sites ONLY, if you previously disabled an HL7 UCX Service
for this installation, you may now enable it.
different from the one the message arrived on. Specifically, the source
7. DSM Sites: Rebuild your mapped set if necessary.
8. Start Link Manager using the option: "TCP/IP
Link Manager Start/Stop."
domain will resolve to one of the VA-namespaced logical links exported
|
