| DESCRIPTION OF ENHANCEMENTS |
1. Introduces HL7 version 2.3.1 MESSAGE STRUCTURE components:
INSTALL NAME: HL*1.6*59
=========
Answer 'NO' to 'Want KIDS to Rebuild Menu Trees upon Completion
of Install?'.
Answer 'NO' to 'Want KIDS to INHIBIT LOGONS during the install?'.
Answer 'NO' to 'Want to DISABLE Scheduled Options, Menu Options,
and Protocols?'.
3. In file 771, HL APPLICATION PARAMETER, the input transforms for FIELD
6. Startup all Logical Links and incoming and outgoing filers. Use the
Filer and Link Management Options ->
RA Restart/Start All Links and Filers
(Note that links that do not have "autostart" enabled will need
to be restarted manually)
For DSM sites ONLY, if you previously disabled an HL7 UCX Service
SEPARATOR and ENCODING CHARACTERS have been modified to prevent reuse
for this installation, you may now enable it.
7. DSM Sites: Rebuild your mapped set if necessary.
8. Start Link Manager using the option: "TCP/IP
Link Manager Start/Stop."
of the field separator in the encoding characters. Each of the
characters defined must be unique.
4. HL*1.6*57 introduced a new menu structure. However, the old, obsolete
menus were not removed. This patch will remove them.
5. Fixes a problem with STUB records left behind in file 870 (Logical
-Introduces a new file (#779.005) to hold the new HL7 MESSAGE
Link) resulting in freezing of links and the System Link Monitor as
well as causing queues to grow until disk space is used up.
NOTE: Some sites may have a considerable number of messages needing to be
purged from file 870. Please consider disabling journalling of ^HLCS() for
about a week after installing this patch.
6. Changes the PROCESSING ID field of file 101 to be no longer required.
Note that HL7 message headers are populated with information for
'TRAINING' or 'PRODUCTION' taken from the HL7 site parameters. Use the
STRUCTURE CODES.
option, SITE PARAMETER EDIT, to verify that your production account is
identified as such and your test/training account is identified as
'TRAINING.' The event driver protocol PROCESSING ID field is now used only
for DEBUG mode. Debug mode will override your site parameter setting. Make
sure the protocol is set to 'debug' on both the sending and receiving
system.
7. Corrects a problem with creating new subscriptions when a user edits
the zero node of file 774.
-Adds a new field, MESSAGE STRUCTURE (#770.5), to the Protocol
This patch resolves the following NOIS calls:
AMA-0300-70683
ISD-0300-71919
HOU-0400-71933
The following routines are included in this patch. The second line of
each of these routines now looks like:
;;1.6;HEALTH LEVEL SEVEN;<patchlist>;Oct 13, 1995
file. When defined, the MESSAGE STRUCTURE will be added to the
CHECK^XTSUMBLD results:
Routine Name Before Patch After Patch Patch List
============ ============ =========== ==========
HLCSHDR 7364841 7637619 **37,19,57,59**
HLCSHDR1 7750238 8586633 **19,57,59**
HLCSQUE 4338251 4440270 **14,61,59**
HLCSQUE1 1150239 1371156 **14,59**
HLFNC2 5397412 5365297 **2,26,57,59**
version 2.3.1 message header.
HLTP4 7805100 7964901 **19,57,59**
HLTPCK1A 14402537 14751742 **2,25,34,57,59**
HLTPCK2A 15262342 15611547 **19,57,59**
HLUTIL2 5387464 5486507 **19,43,57,59**
HLTPCK1 4288888 4452787 **8,36,59**
HLTPCK2 3804314 3962788 **19,59**
HLTP3 14451393 14649677 **19,43,57,58,59**
HLSUB 5501510 5552075 **14,57,58,59**
List of preceding patches: 14, 36, 57, 58, 61
Sites should use CHECK^XTSUMBLD to verify checksums.
Installation Instructions:
==========================
1. Users are allowed to be on the system during the installation.
2. DSM SITES: Review your mapped set. If any of the routines listed
in the Routine Summary section are mapped, they should be removed
from the mapped set at this time.
2. The message type of outbound messages was incorrectly stored in file
3. Shutdown all Logical Links and incoming and outgoing filers, and
the Link Manager. Use the options:
Filer and Link Management Options ->
SA Stop All Messaging Background Processes
LM TCP/IP Link Manager Start/Stop
4. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu. This
option will load the KIDS package onto your system.
773. This has been fixed.
5. The patch has now been loaded into a Transport global on your
system. You now need to use KIDS to install the Transport global.
On the KIDS menu, under the 'Installation' menu, use the following
options:
2 Verify Checksums in Transport Global
3 Print Transport Global
4 Compare Transport Global to Current System
5 Backup a Transport Global
6 Install Package(s)
|
