| DESCRIPTION OF ENHANCEMENTS |
Patch HL*1.6*62
inbound filers. A whole file cross reference has been added to message
Before After
Name Checksum Checksum Patch List
---------------------------------------------------------------------
HLCSDR1 10571563 8554313 2,22,27,30,34,62
HLCSDR2 5218053 4813200 2,9,62
HLCSIN 2517664 4825867 2,30,14,19,62
HLCSOUT 4118513 4765416 25,30,62
HLCSUTL2 2181860 2309661 18,28,62
HLPAT62 *NEW* 236063 62
HLUOPT1 13112533 12526225 10,13,21,36,19,47,62
STATUS field of the IN QUEUE multiple of the HL LOGICAL LINK FILE, #870.
* Checksums produced by CHECK^XTSUMBLD
This patch introduces the following new routine:
HLPAT62 - post-init for this patch has no user-callable entry points
============================================================================
INSTALLATION:
NOTE: This patch should be installed during off hours, when activity is at
a minimum. It requires HL7 patches HL*1.6*28, *34, & *47.
1. Users may be on the system during the installation of this patch.
The inbound filers can now go directly to the logical links which have
2. DSM Sites: If any of these routines is mapped, disable mapping for the
affected routine(s).
3. Shutdown all Logical Links and incoming and outgoing filers, and
the Link Manager. Use the options:
Filer and Link Management Options ->
SA Stop All Messaging Background Processes
LM TCP/IP Link Manager Start/Stop
4. DSM sites: Disable all HL7 UCX Services for this installation.
inbound messages pending, instead of constantly checking each logical
5. Use the 'INSTALL/CHECK MESSAGE' option on the PackMan menu to load the
KIDS package into a Transport global on your system.
6. On the KIDS:Installation menu, use the following options to install the
Transport Global:
2 Verify Checksums in Transport Global
3 Print Transport Global
4 Compare Transport Global to Current System
5 Backup a Transport Global
6 Install Package(s)
Select INSTALL NAME: HL*1.6*62 Loaded from Distribution <date/time>
link to see if any messages are pending.
=========
Install Questions for HL*1.6*62
Want KIDS to Rebuild Menu Trees Upon Completion of Install? YES// YES
===
Want KIDS to INHIBIT LOGONS during the install? YES// NO
==
Want to DISABLE Scheduled Options, Menu Options, and Protocols? YES// NO
==
Enter the Device you want to print the Install messages.
You can queue the install by enter a 'Q' at the device prompt.
Enter a '^' to abort the install.
DEVICE: HOME// <Do NOT queue it!>
------------------
7. Startup all Logical Links and incoming and outgoing filers. Use the
Filer and Link Management Options ->
RA Restart/Start All Links and Filers
(Note: Links which do not have "autostart" enabled will need to
The post-init for this patch will go through file 870 and fire the new xref.
be restarted manually)
8. DSM Sites: If you previously disabled an HL7 UCX Service for this
installation, you may now enable it.
9. DSM Sites: Rebuild your mapped set if necessary.
10. Start Link Manager using the option: "TCP/IP Link Manager Start/Stop."
Here's the updated field with its new xref:
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
STANDARD DATA DICTIONARY #870.019 -- IN QUEUE SUB-FILE
STORED IN ^HLCS(870,
DATA NAME GLOBAL DATA
ELEMENT TITLE LOCATION TYPE
--------------------------------------------------------------------------
870.019,1 STATUS 0;2 SET
'P' FOR PENDING;
'D' FOR DONE PROCESSING;
'S' FOR STUB RECORD;
LAST EDITED: MAY 08, 2000
NOIS: LAS-0100-61912, GRJ-0400-51133, HIN-0501-42418
HELP-PROMPT: This is the status of an individual message in
the queue. These statuses control the flow and
processing of the message.
DESCRIPTION: Status of a particular message. Can be Stub,
Pending, or Done. These statuses control the
processing of a message. For example, a stub
record is created when a message is enqueued,
and cannot be processed until its status is
changed from 'stub' to 'pending'. Changing
this status is the last thing the Low Layer
Test Sites: Las Vegas, NV; Grand Junction, CO
Protocol does after reading in a message.
Finally, once the message has been processed,
its status is changed to 'done'.
CROSS-REFERENCE: 870^AISTAT
1)= S ^HLCS(870,"AISTAT",$E(X,1,30),DA(1),DA)=""
2)= K ^HLCS(870,"AISTAT",$E(X,1,30),DA(1),DA)
Used to quickly identify links with messages
in any status, thus improving performance.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
This patch increases the amount of time between checks to see if the filers
The option, HL PURGE TRANSMISSIONS, is updated to improve the description
and to set the SCHEDULING RECOMMENDED field to YES.
Here's the updated option:
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
NAME: HL PURGE TRANSMISSIONS MENU TEXT: Purge Messages
TYPE: run routine CREATOR: DIMICELI,RON
PACKAGE: HEALTH LEVEL SEVEN
DESCRIPTION: This option purges entries from the HL7 message files:
773 - HL7 MESSAGE ADMINISTRATION
have been asked to stop. In most cases, the check is performed at most
772 - HL7 MESSAGE TEXT
These files contain a record of all outgoing HL7 transmissions and their
status. Messages are purged if they are in a certain status and are a
certain number of days old. The default parameters (number of days) are
taken from fields in file 869.3, HL COMMUNICATION SERVER PARAMETERS. The
fields should be set such that a balance is struck between the need to
keep disk space from filling up and the need to keep messages around long
enough so that they can be investigated in case problems arise. Please
see the descriptions of these fields for more information:
once a minute.
41 - PURGE COMPLETED MESSAGES
42 - PURGE AWAITING ACK MESSAGES
43 - PURGE ALL MESSAGES
Note that the number of days in field 43 must be greater than or equal to
the number of days in field 42, which must be greater than or equal to the
number of days in field 41. If any of the fields violates this rule, then
the default values of these fields will be used, instead.
To purge entries in an error status, run this option directly and answer
'Yes' to the question about purging them. It is recommended that entries in
an error status be reviewed before purging. For this reason, such messages
are NOT purged by automatically recurring scheduled runs of this option.
It is recommended that this option be scheduled to run once a day to keep
the files from getting too large. On TaskMan's 'Edit Option Schedule', the
TASK PARAMETERS field is ignored. Instead, the parameters are taken from
the fields in file 869.3, noted above.
ROUTINE: PURGE^HLUOPT1 TIMESTAMP: 55644,54515
SCHEDULING RECOMMENDED: YES UPPERCASE MENU TEXT: PURGE MESSAGES
For serial connections, this patch also improves the efficiency of the
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
NOTE: This patch should be installed during off hours, when activity is at
a minimum. It requires HL7 patches HL*1.6*28, *34, & *47.
============================================================================
ROUTINES:
The second line of the routine now looks like:
;;1.6;HEALTH LEVEL SEVEN;**[patch list]**;JUL 17,1995
|
