ORDER ENTRY/RESULTS REPORTING (35)    PACKAGE (9.4)

Name Value
NAME ORDER ENTRY/RESULTS REPORTING
PREFIX OR
DEVELOPER (PERSON/SITE) KCDC/SLC
DEVELOPMENT ISC Salt Lake City
CLASS National
CURRENT VERSION 3.0
ADDITIONAL PREFIXES
  • OCX
SHORT DESCRIPTION Order Entry/Results Reporting
VERSION
  • 2.5
    DATE DISTRIBUTED:   1992-11-25 00:00:00
    PATCH APPLICATION HISTORY:
    • 46 SEQ #43
      DATE APPLIED:   1996-06-25 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch addresses many problems associated with Electronic Signature in
      signed online and not allow for 'wet' signatures on the paper chart
      (paperless).  2 or Yes (allow chart signature) is for sites that want all
      orders signed online, but also allow for those cases where there might be
      a manually signed order in the chart somewhere.  This last option is the
      most likely scenerio for most hospitals at this point in time.
       
      The printing of new and unsigned orders has been modified.  Orders print
      (chart copies, labels, service copies, requisitions) when they are
      released.  Prior to this patch, they would print again when they were
      signed.  This is no longer the case because of the confusion and potential
      OE/RR 2.5.  A new field has been added to the Order Parameters file called
      for error when duplicate orders are printed.
      Electronic Record.  It can be set to 1 of 3 choices:
         0 for No
         1 for Yes
         2 for Yes (allow chart signature)
       
      No entry or 0 will essentially keep the functionality for Electronic
      Signature the same.  1 or Yes is for sites that want to have all orders
      
    • 57 SEQ #53
      DATE APPLIED:   1997-12-01 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module 
      under patch OR*2.5*57.
      
    • 61 SEQ #54
      DATE APPLIED:   1997-12-13 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module
      under patch OR*2.5*61.
      
    • 58 SEQ #55
      DATE APPLIED:   1998-02-20 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module
      under patch OR*2.5*58.
      
    • 60 SEQ #56
      DATE APPLIED:   1998-02-20 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module
      under patch OR*2.5*60.
      
    • 62 SEQ #57
      DATE APPLIED:   1998-03-18 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module
      under patch OR*2.5*62.
      
    • 64 SEQ #58
      DATE APPLIED:   1998-05-01 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module 
      under the description of patch OR*2.5*64
      
    • 63 SEQ #59
      DATE APPLIED:   1998-05-13 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See description of build in National Patch Module under the patch OR*2.5*63.
      
    • 49
      DATE APPLIED:   1999-03-22 00:00:00
      APPLIED BY:   USER,ONE
    • 48
      DATE APPLIED:   1996-11-29 00:00:00
      APPLIED BY:   USER,ONE
    • 50 SEQ #46
      DATE APPLIED:   1997-02-04 00:00:00
      APPLIED BY:   USER,ONE
    • 51 SEQ #47
      DATE APPLIED:   1997-03-03 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      An optional parameter is added to the formal list of the subroutine
             D PATIENT^ORU1(.ORPAT,1) ; Will suppress initial page feed
       
      whereas,
       
             D PATIENT^ORU1(.ORPAT) ; Will allow initial page feed/no side-
                                    ; effect (this is how the subroutine was
                                    ; uniformly called by v2.5
      PATIENT^ORU1, which will suppress the initial page feed issued by the
      look-up, prior to presenting the list of patients from which the user may
      select.  Because the parameter is optional, and must be set to 1 by the
      calling application to affect the look-up, the change is backward
      compatible, and without side-effects.
       
      Annotated example of use:
       
      
    • 54 SEQ #48
      DATE APPLIED:   1997-08-19 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module 
      under patch OR*2.5*54.
      
    • 55 SEQ #49
      DATE APPLIED:   1997-08-22 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module 
      under patch OR*2.5*55.
      
    • 52 SEQ #50
      DATE APPLIED:   1997-10-21 00:00:00
      APPLIED BY:   USER,ONE
    • 56 SEQ #51
      DATE APPLIED:   1997-11-27 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module 
      under patch OR*2.5*56.
      
    • 59 SEQ #52
      DATE APPLIED:   1997-12-01 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build can be found in the National Patch Module
      under patch OR*2.5*59.
      
    DATE INSTALLED AT THIS SITE:   1996-06-13 00:00:00
  • 3.0
    DATE DISTRIBUTED:   2005-11-19 00:00:00
    PATCH APPLICATION HISTORY:
    • 1
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch corrects OPENERR errors which occur in DEL^%ZISH when no data
      is returned for a CPRS report.
      
    • 22
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 100 SEQ #100
      DATE APPLIED:   2001-06-25 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch will add the edit/resubmit consults option to the
      list manager.
       
      Please see the patch module on FORUM for a complete description
      of this patch.  In addition, you may want to review consult
      patches GMRC*3*15 and GMRC*3*18, which are also required to see
      the entire functionality.
      
    • 85
      DATE APPLIED:   2001-06-25 00:00:00
      APPLIED BY:   USER,ONE
    • 113 SEQ #102
      DATE APPLIED:   2001-08-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description for this patch can be found in the National Patch Module
      under OR*3*113.
      
    • 115 SEQ #103
      DATE APPLIED:   2001-09-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      You can see the description of this build in the National Patch Tracking 
      module under patch number OR*3*115.
      
    • 109 SEQ #104
      DATE APPLIED:   2001-09-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This build includes the GUI specific portions of CPRS that were pulled
      out of the OR3.0 build.
       
      Routines: ORW* 
      OR*
      Option:   OR CPRS GUI CHART
       
      also TIUSRVP and TIUEDIT
      
    • 95 SEQ #105
      DATE APPLIED:   2001-09-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch OR*3*95 updates a number of menu editor and related items.  Please
      see the FORUM patch description for a complete description of all of the
      changes included in this patch.
      
    • 94
      DATE APPLIED:   2001-09-26 00:00:00
      APPLIED BY:   USER,ONE
    • 114 SEQ #107
      DATE APPLIED:   2001-10-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This is the updated version of the performance monitor.  Please see the
      FORUM patch description for complete details regarding this patch.
      
    • 119 SEQ #108
      DATE APPLIED:   2001-10-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This is the updated version of the performance monitor.  Please see the
      FORUM patch description for complete details regarding this patch.
      
    • 118 SEQ #109
      DATE APPLIED:   2001-10-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 16
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch corrects a problem of getting a Null Subscript error when
      printing orders that have no order text.
      
    • 124 SEQ #110
      DATE APPLIED:   2001-11-06 00:00:00
      APPLIED BY:   USER,ONE
    • 122 SEQ #111
      DATE APPLIED:   2001-11-06 00:00:00
      APPLIED BY:   USER,ONE
    • 120 SEQ #112
      DATE APPLIED:   2001-11-21 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 117 SEQ #113
      DATE APPLIED:   2001-11-21 00:00:00
      APPLIED BY:   USER,ONE
    • 105
      DATE APPLIED:   2001-12-10 00:00:00
      APPLIED BY:   USER,ONE
    • 116 SEQ #115
      DATE APPLIED:   2001-12-10 00:00:00
      APPLIED BY:   USER,ONE
    • 130 SEQ #116
      DATE APPLIED:   2001-12-31 00:00:00
      APPLIED BY:   USER,ONE
    • 129 SEQ #117
      DATE APPLIED:   2001-12-31 00:00:00
      APPLIED BY:   USER,ONE
    • 125 SEQ #118
      DATE APPLIED:   2001-12-31 00:00:00
      APPLIED BY:   USER,ONE
    • 112 SEQ #119
      DATE APPLIED:   2002-01-16 00:00:00
      APPLIED BY:   USER,ONE
    • 25
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 110 SEQ #120
      DATE APPLIED:   2002-01-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see FORUM patch description for a complete analysis of this patch.
      
    • 121 SEQ #121
      DATE APPLIED:   2002-02-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 131 SEQ #122
      DATE APPLIED:   2002-02-26 00:00:00
      APPLIED BY:   USER,ONE
    • 128 SEQ #124
      DATE APPLIED:   2002-02-26 00:00:00
      APPLIED BY:   USER,ONE
    • 136 SEQ #125
      DATE APPLIED:   2002-02-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the full patch description on the FORUM account for this patch.
      
    • 135 SEQ #126
      DATE APPLIED:   2002-03-15 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See National Patch Module.
      
    • 138 SEQ #127
      DATE APPLIED:   2002-04-08 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Database clean up for POE related issues.  Please see FORUM for complete 
      patch details.
      
    • 145 SEQ #128
      DATE APPLIED:   2002-04-08 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See FORUM for the full description of this patch.  Update to database 
      clean up distributed in patch OR*3*138.
      
    • 140 SEQ #129
      DATE APPLIED:   2002-04-23 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 134 SEQ #130
      DATE APPLIED:   2002-05-06 00:00:00
      APPLIED BY:   USER,ONE
    • 23
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to description on the patch message.
      printing orders that have no order text.
      
    • 133 SEQ #131
      DATE APPLIED:   2002-05-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      BCMA ORDER COM V1.1
      
    • 132 SEQ #132
      DATE APPLIED:   2002-05-28 00:00:00
      APPLIED BY:   USER,ONE
    • 123 SEQ #133
      DATE APPLIED:   2002-05-28 00:00:00
      APPLIED BY:   USER,ONE
    • 147 SEQ #135
      DATE APPLIED:   2002-05-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 144 SEQ #136
      DATE APPLIED:   2002-07-10 00:00:00
      APPLIED BY:   USER,ONE
    • 142 SEQ #137
      DATE APPLIED:   2002-07-24 00:00:00
      APPLIED BY:   USER,ONE
    • 148 SEQ #138
      DATE APPLIED:   2002-07-24 00:00:00
      APPLIED BY:   USER,ONE
    • 146 SEQ #139
      DATE APPLIED:   2002-08-14 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 154 SEQ #140
      DATE APPLIED:   2002-08-15 00:00:00
      APPLIED BY:   USER,ONE
    • 150 SEQ #141
      DATE APPLIED:   2002-09-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch includes a API EN^ORBCMA2 required by BCMA V2. The #DBIA for 
      this API is 3616.
      
    • 3
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 155 SEQ #142
      DATE APPLIED:   2002-09-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch is being released to turn off the spell checking functionality 
      based on input from the National Center for Patient Safety.
      
    • 143 SEQ #143
      DATE APPLIED:   2002-10-08 00:00:00
      APPLIED BY:   USER,ONE
    • 139 SEQ #144
      DATE APPLIED:   2002-10-08 00:00:00
      APPLIED BY:   USER,ONE
    • 152 SEQ #146
      DATE APPLIED:   2002-10-25 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch is in support of the Hui/VHA CIO SD&D Pharmacy Data Interchange
      project. The project provides a method for the one-way electronic transfer
      of prescription orders from an external system to VistA.
      
    • 127 SEQ #147
      DATE APPLIED:   2002-11-08 00:00:00
      APPLIED BY:   USER,ONE
    • 161 SEQ #148
      DATE APPLIED:   2002-11-22 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Fixes problem with November dates being interpreted as "NOW".  Please see 
      patch description on FORUM for complete details.
      
    • 158 SEQ #149
      DATE APPLIED:   2002-12-09 00:00:00
      APPLIED BY:   USER,ONE
    • 141
      DATE APPLIED:   2002-12-09 00:00:00
      APPLIED BY:   USER,ONE
    • 166 SEQ #151
      DATE APPLIED:   2002-12-09 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Update to post-install for patch OR*3*158.  Please see FORUM patch module 
      for full details.
      
    • 168 SEQ #152
      DATE APPLIED:   2003-01-09 00:00:00
      APPLIED BY:   USER,ONE
    • 12
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 167 SEQ #153
      DATE APPLIED:   2003-01-09 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 159 SEQ #154
      DATE APPLIED:   2003-01-15 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build is found in the National Patch Module under 
      patch OR*3.0*159.
      
    • 164 SEQ #155
      DATE APPLIED:   2003-02-04 00:00:00
      APPLIED BY:   USER,ONE
    • 171 SEQ #156
      DATE APPLIED:   2003-02-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build is found in the National Patch Module under 
      patch OR*3.0*171.
      
    • 162 SEQ #157
      DATE APPLIED:   2003-02-04 00:00:00
      APPLIED BY:   USER,ONE
    • 165 SEQ #158
      DATE APPLIED:   2003-02-04 00:00:00
      APPLIED BY:   USER,ONE
    • 169 SEQ #159
      DATE APPLIED:   2003-03-01 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 170 SEQ #160
      DATE APPLIED:   2003-03-01 00:00:00
      APPLIED BY:   USER,ONE
    • 160 SEQ #161
      DATE APPLIED:   2003-03-01 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 177 SEQ #162
      DATE APPLIED:   2003-04-17 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Updates to Event Delayed Order code.
      See FORUM patch description for complete details.
      
    • 7
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 178 SEQ #163
      DATE APPLIED:   2003-04-17 00:00:00
      APPLIED BY:   USER,ONE
    • 175 SEQ #164
      DATE APPLIED:   2003-04-17 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 153 SEQ #165
      DATE APPLIED:   2003-04-30 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Description:
      The following is a list of the routine(s) included in this patch.  The
      second line of each of these routine(s) will look like:
        
      <tab>;;3.0;ORDER ENTRY/RESULTS REPORTING;**<patch list>**;Dec 17, 1997
        
                                  CHECK^XTSUMBLD results
       Routine name         Before Patch      After Patch          Patch List
       ============         ============      ===========          ==========
       ORMGMRC                                   12946666      3,26,68,92,153
       ORMLR                                     15500365            3,92,153
      ===========
       ORMRA                                     16479106 3,53,92,110,136,153
       ORQRY                                     10982388                 153
       
      Installation Instructions:
      ==========================
       
      Installation of this patch will take less than 2 minutes.  Although
      users need not be off the system when applying this patch, it should be
      installed at a nonpeak time to minimize disruption to users.
        
       
       1.   Use the INSTALL/CHECK MESSAGE option on the Packman Menu, to 
            load the KIDS Transport Distribution global.  
         
       2.   Review your mapped set.  If any of the routines listed in the 
            ROUTINE SUMMARY section are mapped, they should be removed 
            from the mapped set at this time.  
         
       3.   From the Kernel Installation and Distribution System (KIDS) Menu, 
            select the Installation menu.  
         
      This patch provides server side updates for the CPRS Query Tool.  This
       4.   From the installation menu, you may elect to use the following 
            options (when prompted for INSTALL NAME, enter OR*3.0*153): 
         
            a.  Backup a Transport Global
            b.  Compare Transport Global to Current System
            c.  Verify Checksums in Transport Global
         
       5.   Use the Install Package(s) option and select the package 
            OR*3.0*153.
        
      tool allows queries to be created for Orders, Documents, Appointments,
       6.   When prompted 'Want KIDS to INHIBIT LOGONs during the install?
            YES//', respond 'NO'.
        
       7.   When prompted 'Want to DISABLE Scheduled Options, Menu 
            Options, and Protocols? YES//', respond 'YES', and disable
            OR* Options and Protocols.
        
       8.   If routines were unmapped as part of step 2, they should 
            be returned to the mapped set once the installation has 
            run to completion.
      and Visits.
       
      ROUTINE SUMMARY:
      ================
      
    • 185 SEQ #166
      DATE APPLIED:   2003-05-20 00:00:00
      APPLIED BY:   USER,ONE
    • 183 SEQ #167
      DATE APPLIED:   2003-06-03 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      CRSP CMOP FIX
      
    • 180 SEQ #168
      DATE APPLIED:   2003-06-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 163 SEQ #169
      DATE APPLIED:   2003-08-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 188 SEQ #170
      DATE APPLIED:   2003-08-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Remove Race and Ethinicity codes
      
    • 149
      DATE APPLIED:   2003-08-13 00:00:00
      APPLIED BY:   USER,ONE
    • 173
      DATE APPLIED:   2003-08-13 00:00:00
      APPLIED BY:   USER,ONE
    • 14
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See National Patch Module (NPM) on FORUM.
      
    • 184 SEQ #173
      DATE APPLIED:   2003-08-13 00:00:00
      APPLIED BY:   USER,ONE
    • 182 SEQ #174
      DATE APPLIED:   2003-09-12 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Fixes problem with allergy orders that didn't pass correctly from CPRS.  
      See the full description on FORUM.
      
    • 196 SEQ #175
      DATE APPLIED:   2003-09-12 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Update to performance monitor for pharmacy transitional benefits 
      program.  Please see FORUM for a complete description.
      
    • 203 SEQ #177
      DATE APPLIED:   2003-09-24 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Emergency patch / GUI 22.12 to fix problems with GUI 22.11 / patch 
      OR*3*173.
      
    • 181
      DATE APPLIED:   2003-09-24 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the National Patch Module for details of the enhancements 
      included in this patch.
      
    • 186 SEQ #179
      DATE APPLIED:   2003-10-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the FORUM description for a complete review of the changes 
      incorporated in this patch.
      
    • 201 SEQ #180
      DATE APPLIED:   2003-10-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 193 SEQ #182
      DATE APPLIED:   2003-10-23 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 191 SEQ #181
      DATE APPLIED:   2003-10-23 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 189 SEQ #183
      DATE APPLIED:   2003-11-07 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 20
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See description on patch message.
      
    • 206 SEQ #184
      DATE APPLIED:   2003-12-31 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Emergency Patch to reduce number of calls to RPC "ORWPT ID INFO."  Also 
      includes fix for slow TIU Template loading.
      
    • 209 SEQ #185
      DATE APPLIED:   2003-12-31 00:00:00
      APPLIED BY:   USER,ONE
    • 214
      DATE APPLIED:   2004-01-31 00:00:00
      APPLIED BY:   USER,ONE
    • 179 SEQ #187
      DATE APPLIED:   2004-03-02 00:00:00
      APPLIED BY:   USER,ONE
    • 174
      DATE APPLIED:   2004-03-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The description of this build is found in the National Patch Module under
      patch OR*3*174.
      
    • 208 SEQ #189
      DATE APPLIED:   2004-03-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 176 SEQ #190
      DATE APPLIED:   2004-03-02 00:00:00
      APPLIED BY:   USER,ONE
    • 187
      DATE APPLIED:   2004-03-02 00:00:00
      APPLIED BY:   USER,ONE
    • 172 SEQ #192
      DATE APPLIED:   2004-03-30 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 198 SEQ #193
      DATE APPLIED:   2004-07-02 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 6
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Note: This patch can only be installed at sites running CPRS.
       
      The entry point to do medication order checks for drug-drug interactions,
      duplicate drug orders and duplicate drug class orders was changed from
      ^PSOORDRG to EN^PSOORDRG.  This patch changes references in routine ORKPS
      to the new entry point EN^PSOORDRG.
      
    • 190
      DATE APPLIED:   2004-08-02 00:00:00
      APPLIED BY:   USER,ONE
    • 224
      DATE APPLIED:   2004-09-03 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See NPM on Forum for description.
      
    • 192 SEQ #196
      DATE APPLIED:   2004-10-15 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 223 SEQ #197
      DATE APPLIED:   2004-10-15 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 213
      DATE APPLIED:   2004-10-15 00:00:00
      APPLIED BY:   USER,ONE
    • 200 SEQ #199
      DATE APPLIED:   2004-10-15 00:00:00
      APPLIED BY:   USER,ONE
    • 194 SEQ #200
      DATE APPLIED:   2004-10-15 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 222 SEQ #201
      DATE APPLIED:   2004-11-11 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Group Notes
      
    • 225 SEQ #202
      DATE APPLIED:   2004-11-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Update to performance monitor to exclude Non-VA med entries.
      
    • 157
      DATE APPLIED:   2004-12-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Implement Clinical Reminders index.
      
    • 5
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch corrects a problem of getting a Null Subscript error when
      printing orders that have no order text.
      
    • 28
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See the patch description on the patch message.
      
    • 227 SEQ #204
      DATE APPLIED:   2004-12-28 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 217 SEQ #205
      DATE APPLIED:   2005-02-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch Description:
      matching source record. To address this issue a utility has been written 
      OREORV2                  N/A       8511634             217
       
      Installation Instructions:
      ==========================
      This patch should be loaded during non-peak hours to minimize disruption 
      to users. Installation should take less than 2 minutes. Users are allowed 
      to be on the system during the installation. TaskMan does not need to be 
      stopped.
       
      1. Use the INSTALL/CHECK MESSAGE option on the PackMan menu.
      that will perform an analysis of the ORDERABLE ITEM FILE, file # 101.43, 
       
      2. From the Kernel Installation and Distribution System Menu, select the 
      Installation menu.
       
      3. From this menu, you may elect to use the following options (when 
      prompted for INSTALL NAME, enter OR*3.0*217):
          a. Backup a Transport Global
          b. Compare Transport Global to Current System
          c. Verify Checksums in Transport Global
       
      and produce a detailed report of its findings. This utility will scan the 
      4. Use the Install Package(s) options and select the package OR*3.0*217.
       
      5. When prompted 'Want KIDS to INHIBIT LOGONS during install? YES//', 
      respond "NO".
       
      6. When prompted 'Want to DISABLE Scheduled Options, Menu Options and 
      Protocols? YES//', respond "NO".
      the ORDERABLE ITEM FILE record by record. This utility  determines the 
      following about the current ORDBERABLE ITEM FILE record being processed:
       
      1. Is the ID field null?
       
      2. Is the source record IEN stored in the ID field null?
       
      ==================
      3. Is the source record package code stored in the ID field null?
       
      4. Is the data stored in the ID field properly formatted?
       
      5. Is the source record package code part of the current interface 
      specification?
       
      6. Is there a matching source record?
       
      7. Is it currently flagged as active?
      This patch provides a utility, consisting of a set of three routines, to 
       
      A temporary global is build tracking all of the above for a detailed 
      report. Only an ORDERABLE ITEM FILE record passing all tests is modified.
      At this point it will be flagged as inactive effective immediately. After
      the utility has printed its report the temporary global created by this
      utility is deleted. The utility is to be run at any time the null
      subscript error is encountered during the ordering process.
       
      It is these invalid orderable items with no matching source records that 
      are generating the NULLSUBSCR errors described in the associated NOIS 
      find records in the ORDERABLE ITEM FILE # 101.43 which do not have 
      cases. The flagging of records in the ORDERABLE ITEM FILE # 101.43 
      without matching source records as inactive will prevent CPRS GUI from 
      presenting them to the user as valid orderable items. The routines in 
      this patch can be run anytime a selected orderable item generates the 
      NULLSUBSCR error.
       
      Associated NOIS:
      ================
      1. ALB-1001-51034 - UNDEF VAR LOAD+6~ORWDLR32
      2. DAN-0204-42157 - Error on Order of Lab Test
      matching records in their source files. It will flag any active Orderable 
      3. NJH-0402-20607 - Receiving error message in CPRS
      4. SBY-0803-30443 - LOAD+4~ORWDLR32:1,%DSM-E-NULLSUBSCR
       
      OPTIONS
      =======
       
      CPRS Clean-up Utilities menu (ORE MGR, a menu option) was modified. A new 
      option was added to it.
       
      Orderable Items Records Validation (ORE ORDERABLE ITEMS VALIDATION, a run 
      Item record without a matching source record as inactive and print a 
      routine option) was created. It has been added to the CPRS Clean-up 
      Utilities menu.
       
      The menu path to the new option is:
              CPRS Manger Menu
              CPRS Configuration (IRM) - IR
              CPRS Clean-up Utilities - UT
              Orderable Items Records Validation - OI
       
      HOW TO RUN THE UTILITY:
      detailed report of its findings.
      =======================
       
      1. Enter the "CPRS Manager Menu".
       
      2. Select the "CPRS Configuration (IRM)" option.
       
      3. Select the "CPRS Clean-up Utilities" option.
       
      4. Select the "Orderable Items Records Validation" option.
       
       
      5. The user will be presented with a screen with a brief description of 
      the option's functionality. At the "Do you wish to run this program? 
      Enter Yes or No?" prompt enter Y for yes. Entering N for No will return 
      the user to the menu.
       
      6. The user will be prompted for a device for the utilities output. The 
      output can be sent to the terminal screen. A printer for hard copy can be 
      selected. This is recommended. It can be queued to the Kernel Spool and 
      set to run at a preferred later time. 
       
      The issue is an active orderable item record that does not have a 
      ROUTINE SUMMARY:
      ================
      The following routines are included in this patch.  The second line of 
      each of these routines now looks like:
       ;;3.0;ORDER ENTRY/RESULTS REPORTING;**[Patch List]**;Dec 17, 1997
       
      Routine name    Before Patch    After Patch        Patch List
      ============    ============    ===========        ==========
      OREORV                   N/A       4346077             217
      OREORV1                  N/A       3985270             217
      
    • 195
      DATE APPLIED:   2005-02-04 00:00:00
      APPLIED BY:   USER,ONE
    • 216 SEQ #207
      DATE APPLIED:   2005-02-12 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      CPRS M-side changes in support of removing allergies as
      orders.  Please see the forum module for a complete description
      of this patch.
      
    • 226
      DATE APPLIED:   2005-03-11 00:00:00
      APPLIED BY:   USER,ONE
    • 210
      DATE APPLIED:   2005-03-11 00:00:00
      APPLIED BY:   USER,ONE
    • 231
      DATE APPLIED:   2005-05-06 00:00:00
      APPLIED BY:   USER,ONE
    • 229 SEQ #212
      DATE APPLIED:   2005-05-06 00:00:00
      APPLIED BY:   USER,ONE
    • 211
      DATE APPLIED:   2005-05-25 00:00:00
      APPLIED BY:   USER,ONE
    • 234 SEQ #215
      DATE APPLIED:   2005-06-25 00:00:00
      APPLIED BY:   USER,ONE
    • 33
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch will make the CPRS-ARTS interface compatible with the re-design
      of the National Drug File.
      
    • 235
      DATE APPLIED:   2005-07-09 00:00:00
      APPLIED BY:   USER,ONE
    • 233 SEQ #217
      DATE APPLIED:   2005-08-13 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Support for allergy data standardization updates that are needed
      in the CPRS package.  Please see FORUM for a complete description.
      
    • 221 SEQ #218
      DATE APPLIED:   2005-10-20 00:00:00
      APPLIED BY:   USER,ONE
    • 239 SEQ #219
      DATE APPLIED:   2005-10-20 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 220 SEQ #220
      DATE APPLIED:   2005-11-15 00:00:00
      APPLIED BY:   USER,ONE
    • 240 SEQ #221
      DATE APPLIED:   2005-12-21 00:00:00
      APPLIED BY:   USER,ONE
    • 241 SEQ #222
      DATE APPLIED:   2006-01-12 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 237
      DATE APPLIED:   2006-03-08 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This the OR part of a multi package patch to add Additional IV Drug Units
      - MG-PE & NANOGRAM the primary patch will be in PSJ*5.0*152.
      
    • 247 SEQ #224
      DATE APPLIED:   2006-04-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      CORRECT THE FILING OF THE PATIENT NAME IN THE AUTO LINKED LIST PROCESS. 
      
    • 215
      DATE APPLIED:   2006-05-05 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      CPRS GUI 26
      
    • 30
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 251 SEQ #226
      DATE APPLIED:   2006-05-26 00:00:00
      APPLIED BY:   USER,ONE
    • 258
      DATE APPLIED:   2006-07-11 00:00:00
      APPLIED BY:   USER,ONE
    • 257 SEQ #228
      DATE APPLIED:   2006-07-11 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      UPDATING ORWRP TIME/OCC LIMITS ALL PARAMETER
      
    • 264 SEQ #229
      DATE APPLIED:   2006-08-07 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       This patch fixes an incorrect Web address for activating VistaWeb from
       CPRS. The parameter: ORWRP VISTAWEB ADDRESS is changed to:
        "https://vistaweb.domain.ext/ToolsPage.aspx"
      
    • 253 SEQ #230
      DATE APPLIED:   2006-09-23 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      FIX UNSIGNED ORDERS NOT GENERATING ALERTS.
      MORE USEFUL NUMERIC PROMPT ERROR MESSAGES
      FIX RESTRICTED PATIENT LIST SCROLLING BUG.
      
    • 228 SEQ #231
      DATE APPLIED:   2006-09-23 02:03:38
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch is part of the Patient Financial Services System (PFSS) 
      billing replacement system, business process improvements, and 
      enhancements to Veterans Health Information Systems and Technology 
      Architecture (VistA) to support integration with the COTS billing 
      replacement system.  Significant changes to VistA legacy systems and 
      ancillary packages are necessary.
       
      Some of the PFSS software components are not operational until the PFSS 
      On/Off Switch, distributed with patch IB*2*260, is set to "ON .  The 
      ability for the local site to set the switch to "ON  will be provided at 
      the appropriate time with the release of a subsequent Integrated Billing 
      project.  PFSS patches are being released on various schedules.  Some 
      patch.
       
      For more information about the PFSS project, review the documentation 
      accompanying this patch and refer to the following website: 
      http://vista.domain.ext/billreplace/
       
      The OR*3.0*228 patch is phase II of the CPRS portion of the PFSS 
      project.  Phase I of the CPRS portion of the project is contained in 
      OR*3.0*215.
      patch functionality will not be active until a new PFSS switch is 
      activated during final implementation. PFSS will initially be implemented 
      at select pilot sites ONLY.
       
      The purpose of the PFSS project is to prepare the VistA environment for 
      the implementation of a commercial off-the-shelf (COTS) billing 
      replacement system.  The project consists of the implementation of the 
      
    • 261 SEQ #232
      DATE APPLIED:   2006-11-22 21:30:07
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Corrects problem with CIDC assign parameter and disable for all providers.
      
    • 255 SEQ #233
      DATE APPLIED:   2006-11-22 22:39:11
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch addresses two issues, First orderable items not turning off
      Reminders. Second the DEA# and VA# fields are not being check, when
      narcotics are ordered with the outpatient IV dialog in CPRS.
      
    • 250 SEQ #234
      DATE APPLIED:   2006-11-22 23:01:12
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch addresses problems with:
      -The LAB Quick Orders not displaying (CH) LAB Quick Orders.
      -Expert System VITALS^ORQQVI not finding all vital measurements.
      -Display Patient Alerts and Alert Recipients, display truncating Order 
       number.   
      
    • 249 SEQ #235
      DATE APPLIED:   2006-11-22 23:49:38
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      THIS PATCH ADDRESSES A PROBLEM WITH THE PROBLEM LIST LEX SEARCH AND ADDS 
      THE WOR DRUG TO THE ORDER CHECK  DUPLICATE DRUG CHECK WARNING.
      
    • 8
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 244 SEQ #236
      DATE APPLIED:   2006-11-23 00:20:09
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch contains the routine ORY244 which will scan Order file #100 
      for missing abnormal results, from Fileman date 3050901 to present and 
      restore them. 
      
    • 242 SEQ #237
      DATE APPLIED:   2006-12-11 16:17:21
      APPLIED BY:   USER,ONE
    • 260 SEQ #238
      DATE APPLIED:   2006-12-29 09:21:30
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      CPRS Miscelaneous fixes.
      
    • 254 SEQ #239
      DATE APPLIED:   2007-06-27 21:28:11
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch corrects an error that was causing IV orders to only be 
      valid for 6 minutes after the time the order was placed.
      
    • 270
      DATE APPLIED:   2007-06-27 22:09:16
      APPLIED BY:   USER,ONE
    • 248 SEQ #241
      DATE APPLIED:   2007-09-04 22:58:00
      APPLIED BY:   USER,ONE
    • 262 SEQ #242
      DATE APPLIED:   2007-09-04 23:05:35
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 245 SEQ #243
      DATE APPLIED:   2007-09-04 23:06:21
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Adds option for editing quick orders by user.  Fixes bugs when editing 
      quick orders.
      
    • 232 SEQ #244
      DATE APPLIED:   2007-09-04 23:07:49
      APPLIED BY:   USER,ONE
    • 267 SEQ #245
      DATE APPLIED:   2007-09-04 23:12:58
      APPLIED BY:   USER,ONE
    • 35
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 265 SEQ #247
      DATE APPLIED:   2007-09-04 23:39:02
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This build/patch address 3 issues:
      5. The correct IEN for pointer for Imaging is
      checked and update if needed by the post init routine ORY26508.
      6. Modify SESSION^ORCHECK to also check the ADVERSE REACTION ASSESSMENT 
      (120.86) for allergies before assuming the error message stored at 
      ^OR(100,+ORIFN,9 is up to date and displaying the "no allergy assessment" 
      error again upon signing the order.
      7. If they comment is the same, set the ORDIALOG flag 
      "FORMAT" to "@" to prevent the duplication of the comment in CPRS.
      8. Modify MEDHIST^ORWPS to set ORPHMID regardless if the flag CKPKG for 
      PSB*2.0*19 is set.  Use ORPHMID in the call to HISTORY^PSBMLHS instead
      1. "AW" Cross Reference on TO field of File 100 not updated when order 
      of ORPSID.
      changes.
      2. Lab Threshold exceeded warning not working when results has a greater 
      than or less than symbol. Example: <5 or >5
      3. Quick Orders not retaining Dosage when edited and dose is over 20 
      characters.
      4.Update the routine ORB3TIM2 to work the alert even when not passed in 
      ORBLST (expired).
      
    • 271 SEQ #249
      DATE APPLIED:   2007-09-04 23:44:34
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Correct CPRS RPC used by CAPRI, that was trying to return future 
      appointments.
      
    • 275 SEQ #250
      DATE APPLIED:   2007-09-05 01:22:06
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch corrects the issue introduced in OR*3.0*265 where pending 
      orders no longer display the Medication Administration History.It also 
      addresses a subscript error and a disk full error from ORWPS1
      
    • 263 SEQ #251
      DATE APPLIED:   2007-12-12 20:46:07
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
      the start date.
       
      3. Creating a new menu by copying an existing menu is resulting in an 
      error.
       
      4. If a patient has only clinical procedures reports in the Procedures 
      (local only) section of the CPRS reports tab, the reports will not print 
      to a printer.
      This patch will address a few issues:
      1.  When using the Search orders by nature or status option, if the user 
      entere a start date of T-1 and an end date of T, the search will return 
      no results.
       
      2. In the option 'Search orders by nature or status', the help text for
      the date ranges state that the start date must be older than the end
      date. But the option will allow the user to enter an end date older than
      
    • 278 SEQ #252
      DATE APPLIED:   2007-12-12 21:29:08
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Corrects the issue with Tasks accumulating while  waiting  for a 
      partition. Caused by ORMEVNT exiting without unlocking a global that it 
      locked. 
      
    • 274 SEQ #254
      DATE APPLIED:   2007-12-12 21:43:56
      APPLIED BY:   USER,ONE
    • 277
      DATE APPLIED:   2007-12-12 22:15:02
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      CPRS GUI 26
      
    • 256 SEQ #255
      DATE APPLIED:   2008-02-03 22:04:48
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 279 SEQ #256
      DATE APPLIED:   2008-02-03 22:35:06
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      The purpose of this patch is to address an issue that has been reported 
       
         Problem:
         --------
         The problem deals with the display of the order information for 
         Outpatient prescriptions once the order has been accepted in CPRS.
       
         The drug name is missing from the order text in the display. The 
         problem was traced back to 
       
         Resolution:
      with the drug name missing from pending orders.
         -----------
         OR*2.5*49 released a menu option that performs a conversion on
         the ORDER DIALOG (#101.41) file. The [ORCM CONVERT MENUS] option is
         being removed.
       
      Overview:
      =========
      1. HD199896      Drug name missing from Pending Orders
          HD154624     duplicate
          HD157144     duplicate
          HD163806     duplicate
      
    • 287 SEQ #257
      DATE APPLIED:   2008-05-26 15:03:02
      APPLIED BY:   USER,ONE
    • 37
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
      See patch OR*3*37 in the National Patch Module for description on this
      build.
      
    • 246 SEQ #258
      DATE APPLIED:   2008-07-22 07:41:40
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      UPDATE ORDER DOSAGE WITH NEW FORMAT
      
    • 238
      DATE APPLIED:   2009-04-21 10:15:00
      APPLIED BY:   USER,SEVENTEEN
    • 281 SEQ #259
      DATE APPLIED:   2009-04-21 14:38:32
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. A problem was discovered with the Results Reporting [OR RESULTS
      may need some text moved to "Reason for Study". Since "Reason for Study"
         --------
         Radiology and Imaging quick orders may need to be updated as a result
         of the changes in OR*3*243.
       
         Resolution:
         -----------
         A new option will be provided, Radiology/Imaging Quick Order Search
         [ORCM RA SEARCH]. This option will search for Radiology and Imaging
         quick orders that have free text fields that contain text. A sample
         message and additional details are included below the 'Important 
      has a size limit of 64 characters changes must be made by a person who can
         Notes' section.
       
      3. HD0000000232271 Need routine to identify Radiology QOs with default
                         date
       
         Problem:
         --------
         Radiology and Imaging quick orders should no longer contain a default
         of TODAY for Date Desired. Sites need assistance in locating and 
         updating the quick orders that need to be updated.
      review what, if any, portion of the text should be moved into the new
       
         Resolution:
         -----------
         The search option for item 2 includes a search for quick orders that
         contain either 'T' or 'TODAY' for the Date Desired prompt. In addition,
         the option will remove the Date Desired default as requested by the
         user. A sample message and additional details are included below.
       
      ***Important Notes*** 
      If you identify quick orders that need to be updated, you must wait 
      field. This patch will allow sites to produce a list of existing quick
      until after the installation of OR*3*243 to make these updates. Use the
      Enter/edit quick orders [ORCM QUICK ORDERS] option to update the quick 
      orders, where appropriate. It may also be necessary for providers to edit
      their personal quick orders.
       
      Even disabled quick orders will be shown, for review purposes. The results
      will be sent as a mail message to the person who ran the option. Please
      note, it may be necessary for this menu option to be assigned to the
      person responsible for the review (i.e. Clinical Coordinator and/or
      Radiology ADPAC).
      orders that should be reviewed. HD0000000217362
       
      The following shows a sample message. It is difficult to read since it is 
      formatted to print 132 characters. In the column for "Text or Start 
      Date/Time", there will be a "T" or "D" to indicate "Text" or "Date".
       
      Select OPTION NAME: ORCM RA SEARCH     RADIOLOGY/IMAGING QUICK ORDER
      SEARCH
      RADIOLOGY/IMAGING QUICK ORDER SEARCH
      Clear Date Desired with a response of "TODAY"? Y
      Exclude quick orders with STAT urgency? Y
       
       
      Requested Start Time: NOW//  (NOV 19, 2007@11:36:42)
       
      The check of Radiology/Imaging Quick Orders is queued
       (to start NOW).
       
      YOU WILL RECEIVE A MAILMAN MESSAGE WHEN TASK #154113 HAS COMPLETED.
       
      Sample mail message:
      Subj: RADIOLOGY/IMAGING QUICK ORDERS  [#668609] 04/15/08@20:39  592 lines 
      3. There should no longer be a default of 'TODAY' for "Date Desired" on a 
      From: CPRS, SEARCH  In 'IN' basket.   Page 1
      --------------------------------------------------------------------------
        The check of Radiology/Imaging Quick Orders is complete.
       
        Here is the list of all quick orders that should be reviewed: 
       
      Quick Order Name                       Disable Text     Text or Start 
      Date/Time
                       Ancestors/Menus or Reminders
        
      Radiology quick order. Some sites have requested the ability to
      RAGR CHEST 2 VIEWS PA&LAT STAT QO                       D: TODAY
                       On a menu or in an order set
                                                              T: POST OP SURGERY
       
      RAGR CHEST 2 VIEW                      DISABLED         T: TEST
       
      ORWDQ E87030CE                         no longer used   T: TESTING
       
      ORWDQ 3A173B44                                          T: h/o high grade 
      fever
      automatically remove 'TODAY' from the "Date Desired" prompt. In addition,
       
      End sample mail message
      there was a request to be able to exclude quick orders with an order
      REPORTING] menu after the installation of GMTS*2.7*85. This patch corrects
      urgency of 'STAT'. HD0000000232271
       
      Associated Remedy:
      ==================
      1. HD0000000241916 GMTS *85 Problem
      2. HD0000000217362 Need routine to identify potential quick order problems
      3. HD0000000232271 Need routine to identify Radiology QOs with default
                         date 
       
      Associated NSR(s):
      this problem. HD0000000241916
      ==================
      N/A
       
      Test Sites:
      ===========
      TBD 
       
      Overview:
      =========
      1. HD0000000241916 GMTS *85 Problem
       
       
         Problem:
         --------
         After a site installed GMTS*2.7*85, they discovered an error would
         occur if they used the Results Reporting Menu [OR RESULTS REPORTING]
         option to display Health Summary results.  It was discovered that the
         variable XQORNOD was being set by the Order Entry Results Reporting
         package incorrectly, with only one piece, and this was causing a
         <SYNTAX>OP+3^XQCHK error to appear.
       
      2. OR*3*243 will add a "Reason for Study" prompt to the Computerized 
         Example:
         --------
      Select OPTION NAME: OR RESULTS REPORTING       Results Reporting Menu
      Results Reporting Menu
       
      Select Patient:    GMTS,TEST PATIENT       DOB    ######### 
       
       
       
                              R E S U L T S   R E P O R T I N G           
      Patient Record System (CPRS) Graphical User Interface (GUI) "Order an
      GMTS,TEST PATIENT     ###-##-####             DOB (AGE)       Wt (lb): NF
      -------------------------------------------------------------------------
                                  --- Main Results Menu ---
       
      1    Health Summary                8    Daily Order Summary
      2    Lab Results (Interim)         9    Order Summary for Date/time Range
      3    Graph Lab Tests               10   Customized Order Summary
      4    Blood Bank Report             11   Print Chart Copy Summary
      5    Anatomic Pathology Report     12   Outpatient RX Profile
      6    Vitals SF511 Report                        
      Imaging Procedure" dialog. The "Reason for Study" requirement was
      7    Vitals Cumulative Report           Ad Hoc Health Summary
       
      Select Item(s): 1   Health Summary  
       
                                   --- Health Summary ---
      Select Health Summary Type: CLINICAL REMINDERS//   <<<Can choose any 
      Health
                                                            Summary Type
      DEVICE: HOME//   TELNET TERMINAL
       
      implemented in the Radiology package with  RA*5.0*75. Existing Radiology
                                                                 04/22/2008 
      11:58
      ***************  CONFIDENTIAL CLINICAL REMINDERS SUMMARY  
      *****************
      I $D(XQORNOD) S 
      %XQ=+XQORNOD,%XQ1=U_$P(XQORNOD,";",2),%XQ=@(%XQ1_%XQ_",0)"),
                                                             ^
      XQOPT=$P(%XQ,U)_U_$P(%XQ,U,2)
      <SYNTAX>OP+3^XQCHK
       
      and Imaging quick orders that have text in "History and Reason for Exam"
         Resolution:
         -----------
         Routine ORPRS07 has been modified to properly set two pieces into
         XQORNOD and thus not generate the error when displaying Health Summary
         results when using the Results Reporting Menu [OR RESULTS REPORTING]
         option.
       
      2. HD0000000217362 Need routine to identify potential quick order problems
       
         Problem:
      
    • 243
      DATE APPLIED:   2009-04-21 15:51:25
      APPLIED BY:   USER,SEVENTEEN
    • 299 SEQ #261
      DATE APPLIED:   2009-04-21 15:53:32
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. For very lengthy patient instructions, there is the possibility that
      The report will contain the orderable item name, dispense drug name, 
      prescription number and the internal entry number (IEN) of the entry from 
      the ORDERS file (#100) as well as other information about the patient and 
      order. Below is a sample output for the report:
       
      Subj: TRUNCATED PATIENT INSTRUCTIONS  [#660505] 02/28/08@23:43  7 lines
      From: CPRS, SEARCH  In 'IN' basket.   Page 1  *New*
      --------------------------------------------------------------------------
        The check for truncated Patient Instructions is complete.
       
      they can be truncated when transferred from Outpatient Pharmacy V. 7.0 to
        Here is the list of the affected orders: 
       
      Patient/Division      SSN   Item/Dispense         Status/RX#    Stop/OIEN
      CPRSPATIENT,GENERAL   1234  ACETAZOLAMIDE TAB     ACTIVE        09/24/2008
      DAYTON                      ACETAZOLAMIDE 250MG   2666845       12608385
       
      In addition to reporting the orders, this routine will also correct the 
      information in the ORDERS file (#100). It is important to check these 
      orders and verify the corrected information is accurate.
       
      Order Entry/Results Reporting V. 3.0. Patch OR*3.0*243 corrects the
      Associated Remedy:
      ==================
      1. HD0000000236377    Patient instructions are truncated
       
      Associated NSR(s):
      ==================
      N/A
       
      Test Sites:
      ===========
      problem with the truncation. However, there is no way to identify orders
      TBD 
       
      Overview:
      =========
      1. HD0000000236377   Patient instructions are truncated
       
         Problem:
         --------
         For very lengthy patient instructions, there is the possibility that 
         they can be truncated when transferred from Outpatient Pharmacy V. 7.0
      that need to be corrected. This patch corrects this problem by creating a 
         to Order Entry/Results Reporting V. 3.0. Patch OR*3.0*243 corrects the
         problem with the truncation. However, there is no way to identify 
         orders that need to be corrected.
       
         Resolution:
         -----------
         Routine ORY299 will execute as a post-install routine. It will search
         through the last 365 days of Outpatient prescriptions, comparing
         patient instructions. A report will be sent to the person who installed
         the patch. In addition, the routine will use the patient instructions
      routine to search through the previous 365 days of Outpatient 
         from Pharmacy to correct truncated patient instructions.
      prescriptions, comparing patient instructions. A report will be sent to 
      the person who installs the patch. It will be sorted by division.
       
      
    • 304
      DATE APPLIED:   2009-04-22 15:20:01
      APPLIED BY:   USER,SEVENTEEN
    • 303 SEQ #264
      DATE APPLIED:   2009-04-22 16:09:08
      APPLIED BY:   USER,SEVENTEEN
    • 301 SEQ #265
      DATE APPLIED:   2009-04-23 10:51:12
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module 
      under OR*3.0*301.
      
    • 292 SEQ #266
      DATE APPLIED:   2009-04-23 10:54:24
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. A site reported a problem with accessing a patient's records afte r
       
      Associated Remedy:
      ==================
      1. HD0000000223856 Intermittent Error message when signing lab orders.
      2. HD0000000069676  help description no longer true
       
      Associated NSR(s):
      ==================
      N/A
       
      their system was co-located. A problem was discovered with the length of
      Test Sites:
      ===========
       
      Overview:
      =========
      1. HD0000000223856 Intermittent Error message when signing lab orders.
       
         Problem:
         --------
         The problem has to do with errors occasionally showing up when
      the lock timeouts. This patch corrects this problem by modifying the locks
         attempting to sign orders. However, the message detail shows no name
         for the person who is working on the order.
       
         Resolution:
         -----------
         The lock timeouts in routine ORX2 have been updated to use the new
         system parameter.
       
      2. HD0000000069676 help description no longer true
       
      to use the system parameter for timeouts, if available. HD0000000223856
         Problem:
         --------
         The problem has to do with the description associated with the OR
         OREMAS MED ORDERS parameter. The description does not indicate that
         this parameters only affects Inpatient Medications orders.
       
         Resolution:
         -----------
         The DESCRIPTION field (#8989.512) of the PARAMETER DEFINITION file
         (#8989.51) was updated to accurately reflect what orders are covered by
       
         this paramter.
      2. A site reported an issue with the help text/description associated with
      the parameter OR OREMAS MED ORDERS. The description for this parameter
      does not make it clear that it only affects Inpatient Medications orders. 
      HD0000000069676
      
    • 285 SEQ #267
      DATE APPLIED:   2009-04-23 11:01:12
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Currently, the Computerized Patient Record System (CPRS) V. 1.0 uses the
       
      A new software package, Clinical Observations, will also collect patient
      vital signs but store the records in a different file. However, both GEN.
      MED. REC. - VITALS V. 5.0 and the new Clinical Observations package will
      update the Clinical Reminders Index global, specifically, the 120.5
      section. This patch ensures that vitals information, regardless of its'
      source will continue to display appropriately on the CPRS cover sheet.
       
      Associated Remedy:
      ==================
      GMRV VITAL MEASUREMENT file (#120.5) to retrieve vitals information to
      HD 222625       CPRS Vitals API
       
      Associated NSR(s):
      ==================
      N/A
       
      Test Sites:
      ===========
      TBD 
       
      display on the Cover Sheet.
      Overview:
      =========
      1. HD222625     CPRS Vitals API
       
         Problem:
         --------
         Vitals information will no longer be stored in file 120.5. CPRS must
         retrieve data using the Clinical Reminders Index global.
       
         Resolution:
       
         -----------
         CPRS access to retrieve vitals information will now be retrieved using
         the Clinical Reminders Index global and the Application Programming
         Interface (API) provided by the GEN. MED. REC. - VITALS V. 5.0 package.
      The purpose of this patch is to modify the retrieval of vitals 
      information to use the Clinical Reminders Index global in conjunction 
      with a standard Application Program Interface supplied by the GEN. MED. 
      REC. - VITALS V. 5.0 package. No functional changes are included, only the
      access method.
      
    • 24
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 289 SEQ #268
      DATE APPLIED:   2009-04-23 11:17:47
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. When an Outpatient complex prescription contains an EXCEPT conjunction 
      corrects this problem by prompting for 'Give additional dose NOW' if the 
      schedule does not have a schedule type of 'ONE-TIME'. 
      HD0000000277913, PSPO #1140
      there is a problem when it is transferred to Inpatient Medications. The 
      new order created does not adequately reflect the provider's intent. This 
      patch corrects this problem by no longer allowing an Outpatient complex 
      order with a conjunction of 'EXCEPT' to be transferred to Inpatient. 
      HD0000000269669, PSPO #1031
       
      2. With the release of OR*3*243, there is no longer a 'Give additional 
      dose NOW' prompt in the [ORCM QUICK ORDERS] menu option. This patch 
      
    • 282 SEQ #269
      DATE APPLIED:   2009-04-23 13:49:44
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. A site reported that the parameter ORQQLR DATE RANGE INPT does not
      and time of the parent order. when an inpatient is selected. 
      HD0000000069365, HD0000000069851
       
      3. When entering a continuous lab order, with a response to 'How Long?'
      that exceeds one day, the stop date is displaying incorrectly. The change
      in item #2 for ORCSEND1 corrects this issue, as well, The collection date
      and time of the last child order created will be used as the stop date and
      time of the parent order. HD0000000070009
       
      4. A provider accidentally selected both a parent lab order as well as
      honor the value at the location level. Routine ORWCV has been modified to
      multiple child orders and then chose the action of 'discontinue'. Upon 
      signature, an error box displayed indicating the order had already been
      signed. Two changes have been made to address this issue. 
       
      First, lab orders will no longer display the parent order. Only the child
      orders will be displayed once the parent order is signed and released to
      service. Routine ORCSEND1 has been modified to 'veil' the parent order
      once the child orders are all created.
       
      Second, routine ORQ2 was modified to include the parent's stop date and
      include the patient's location when an inpatient is selected. 
      time in the detail display of the child order. This refers to the detail
      display from the Orders tab. HD0000000070670
       
      5. When troubleshooting an alert problem, it appears that the child orders
      for a lab order do not show all the needed information. Routine ORCSEND3
      was modified to treat child orders exactly as parent orders or a single
      lab order. All the available information, such as signature, order checks,
      etc. will now be found in the detailed display of each child order.
      HD0000000069279
       
      2. When entering continuous lab orders with schedules that have a 'once
      daily' frequency, a response to 'How Long?' of n or xn should calculate
      the same stop date/time. Routine ORCSEND1 has been modified to use the
      collection date and time of the last child order created as the stop date
      
    • 212
      DATE APPLIED:   2009-06-09 15:36:08
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch implements the interface between CPRS and VBECS, installing
      a new order dialog and other supporting components.  CPRS and VBECS are
      both required to install this patch.
      
    • 298 SEQ #271
      DATE APPLIED:   2009-06-24 14:40:52
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 283 SEQ #272
      DATE APPLIED:   2009-07-02 12:34:23
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. A site reported a problem with duplicate orders in Inpatient
      the ORWDX routine.
       
      4. During unit testing of the changes for the problem of duplicate 
      orders, an issue was found with locking of patient events. When multiple 
      orders for the same event are manually released, a lock on the patient 
      event remains after the process is completed.
       
       
      Overview:
      =========
      Medications V. 5.0. If there were delayed-event orders manually released
      1. HD0000000199004     Discontinued order not showing in CPRS
         HD0000000069901     duplicate
         HD0000000070256     duplicate
         HD0000000092874     duplicate
         HD0000000165137     duplicate
         HD0000000174026     duplicate
         HD0000000280582     duplicate
         HD0000000300668     duplicate
       
         Problem:
      at the same time that the associated event occurred, duplicate orders were
         --------
         A series of delayed orders for Inpatient Medications was written. The 
         orders were released to the service manually from the Computerized 
         Patient Record System (CPRS) GUI at the same time the associated
         patient movement was performed. This resulted in some of the orders
         being duplicated in Inpatient Medications.
       
         Resolution:
         -----------
         The locking logic in the release process has been modified to handle 
      sent to the service. PSI-07-128
         this situation. If the movement and manual release begin at the same 
         time, only one will be allowed to process the orders. Routine ORWDX 
         was modified to handle this.
       
         In addition to the locking issue that was identified, there was a 
         check added to ORWDX to ensure that the order had not already been 
         released by a movement if the user selected manual release. This check 
         already existed in the movement routine.
       
      2. HD0000000281619     Delayed Radiology orders discontinuing on release
       
         HD0000000284481     duplicate
       
         Problem:
         --------
         Delayed Radiology orders were being rejected by Radiology upon manual 
         release. The error message was 'missing/invalid location'.
       
         Resolution:
         -----------
         Routine ORWDX has been modified to record the location and treating    
      2. Two of the test sites reported a problem regarding the change in item 
         specialty for an order after the lock is successful, but before 
         transmitting the order to the service.
       
      3. HD0000000298397     Intermittent ORWDX errors
       
         Problem:
         --------
         Under certain conditions, an error occurs in ORWDX when attempting to
         build the error message back to the user.
       
      #1 adversely affecting delayed Radiology orders.
         Resolution:
         -----------
         Routine ORWDX has been modified to ensure the error message array
         contains all the appropriate information so that no error will occur
         when the patient event is locked.
       
      4. HD0000000307535     Manual release of delayed orders could leave event 
                             lock
       
         Problem:
       
         --------
         When manually releasing more than one delayed order for a single 
         patient event, the event can remain locked once the process finishes.
         Specifically, ^ORE(100.2,event number,0) will remain locked.
       
         The problem is that routine ORWDX issues an incremental lock for the 
         patient event associated with each order that is being released.
         However, when the process completes, a single 'unlock' is issued. For 
         example: three orders, associate with event number 9573 are manually 
         released. When the process completes, the following entry remains in
      3. Two test sites reported a problem of receiving intermittent errors in 
         the lock table:
         38) 20E5C892 2       ^["^^_$1$DGA228:[CHEY19.VBB]"]ORE(100.2,9573, 0)
       
         Solution:
         ---------
         Routine ORWDX has been modified to only issue one lock per event, 
         regardless of the number of orders released that are associated with
         the event.
      
    • 296
      DATE APPLIED:   2009-08-28 10:15:32
      APPLIED BY:   USER,SEVENTEEN
    • 302
      DATE APPLIED:   2009-09-24 10:47:29
      APPLIED BY:   USER,SEVENTEEN
    • 268 SEQ #275
      DATE APPLIED:   2009-09-28 11:33:27
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      A site reported a patient safety issue with the alert information 
       
      In the interim, the alert text is being modified to alleviate some of the 
      confusion. In addition, some documentation updates are being made to 
      remind sites to enable both of the alerts to ensure the provider gets all 
      the appropriate information.
       
      The NAME field (.01) and the MESSAGE TEXT field (.03) of the OE/RR 
      NOTIFICATIONS file (#100.9) are being modified for alerts 22 and 25 
      (internal entry numbers for the two alerts). Alert 22 is being changed 
      from IMAGING RESULTS to IMAGING RESULTS, NON CRITICAL. Alert 25 is being 
      displayed when imaging results, either abnormal or not, are completed. 
      changed from ABNORMAL IMAGING RESULTS to ABNL IMAGING RESLT, NEED ATTN.
       
      The change is being made using a post-installation routine. The person 
      installing the patch will receive a MailMan message with a subject of 
      'OE/RR NOTIFICATIONS ALERT NAME UPDATES' when the update is complete.
       
      This patch requires a change in the Radiology/Nuclear Medicine V. 5.0 
      package. The documentation changes to update the notification name will 
      be included in a separate documentation release.
       
      The problem stems from the fact that the alerts can be disabled and, if 
      Please note: the post-install routine, ORY268, will be removed in a 
      future patch.
       
      Associated Remedy:
      ==================
      1. HD0000000132027 Imaging Results versus Abnormal imaging results
       
      Associated NSR(s):
      ==================
      N/A
      so, due to the text of the alert, the provider may miss some critical 
       
      Test Sites:
      ===========
      TBA
       
      Overview:
      =========
       
      1. HD0000000132027 Imaging Results versus Abnormal imaging results
       
      information.
         Problem:
         =========
         The Radiology Package currently always sends the following alert 
         notifications to OERR/CPRS, conditioned on the type of result (normal, 
         abnormal, amended - normal or abnormal)
            22 - IMAGING RESULTS (contains normal results)
            25 - ABNORMAL IMAGING RESULTS (contains abnormal results)
            53 - IMAGING RESULTS AMENDED (contains both normal and abnormal)
         Based on the parameter settings, some of these alerts may not display. 
         Due to the text of the alert subject, this may be misleading for the 
       
         provider.
       
         Solution:
         =========
         The 'imaging results' notification may refer to both normal and 
         abnormal results. The abnormal results are non-critical. The agreement 
         between the Computerized Patient Record System (CPRS) Clinical
         Workgroup and the Radiology subject matter expert is to modify the
         text of alerts 22 and 25 to reduce the confusion. Alert 22 will    
         become 'IMAGING RESULTS NON CRITICAL'. Alert 25 will become 'ABNL
      The final solution is considered an enhancement and the Radiology subject 
         IMAGING RESLT, NEED ATTN'.
      matter expert will be working with the patient safety office to formulate 
      a new service request to outline the desired behavior.
      
    • 295
      DATE APPLIED:   2009-11-18 09:56:39
      APPLIED BY:   USER,SEVENTEEN
    • 319 SEQ #277
      DATE APPLIED:   2010-01-05 17:00:32
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3*319.
      
    • 41
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 307 SEQ #278
      DATE APPLIED:   2010-03-17 10:13:49
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3*307.
      
    • 309 SEQ #279
      DATE APPLIED:   2010-03-25 16:17:03
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 290 SEQ #280
      DATE APPLIED:   2010-07-22 15:50:16
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      A site reported a problem where a narcotic order replaced an audiology 
         Upon examining the order affected in the ORDERS file (#100), it was 
         discovered that an Outpatient Pharmacy prescription had over-written
         the audiology consult.
       
         Resolution:
         -----------
         An issue was found in the Class III code which performs the AudioCare 
         renewal process. The issue was in the difference between how the 
         Computerized Patient Records System (CPRS) assigns a new order number
         and the process AudioCare renewal was using.
      consult order.
       
         The decision was to create a Class I interface from the AudioCare 
         refill/renewal system. The refill portion will not be affected. The 
         renewal process will now use a standard CPRS Application Programming 
         Interface (API) to perform the renewal.
       
      Overview:
      =========
      HD0000000296920    Unexpected narcotic order found in OERR for a patient
       
         Problem:
         --------
      
    • 316 SEQ #281
      DATE APPLIED:   2010-10-18 11:28:45
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct the following problems.
       
      HD0000000339814 - Glucophage Contrast Media Order Check not triggered.
       
         Glucophage Contrast Media and Glucophage Lab Results Order Checks are 
         not triggered for a metformin order with lower case letters in the drug
         name.  For instance, a site using TALLman lettering for a metformin
         order (metFORMIN) did not fire checks.
      
    • 330 SEQ #282
      DATE APPLIED:   2010-10-19 11:16:55
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3*330.
      
    • 317 SEQ #283
      DATE APPLIED:   2010-11-16 09:54:25
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects 2 issues within the ORDER ENTRY/RESULTS REPORTING 
      package:
       
      1. Signing multiple Lab Collect orders can result in a crash if their 
         collection time has passed.
       
      2. IV Medication quick orders do not show the "Give additional dose NOW?" 
         prompt when appropriate.
      
    • 336 SEQ #284
      DATE APPLIED:   2011-01-10 11:51:21
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      A site reported a problem where a narcotic order replaced an audiology 
         Upon examining the order affected in the ORDERS file (#100), it was 
         discovered that an Outpatient Pharmacy prescription had over-written
         the audiology consult.
       
         Resolution:
         -----------
         An issue was found in the Class III code which performs the AudioCare 
         renewal process. The issue was in the difference between how the 
         Computerized Patient Records System (CPRS) assigns a new order number
         and the process AudioCare renewal was using.
      consult order.
       
         The decision was to create a Class I interface from the AudioCare 
         refill/renewal system. The refill portion will not be affected. The 
         renewal process will now use a standard CPRS Application Programming 
         Interface (API) to perform the renewal.
       
      Overview:
      =========
      HD0000000296920    Unexpected narcotic order found in OERR for a patient
       
         Problem:
         --------
      
    • 323 SEQ #285
      DATE APPLIED:   2011-02-10 10:58:52
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects the following issue within the ORDER ENTRY/RESULTS
       
      HD0000000377607 - DC1+5^ORCSEND Errors
       
         The Order file's veiled field originally was used to hide unreleased 
         orders many years ago. The functionality was brought to use once more 
         by patch OR*3*282 to hide lab parent orders once they are signed.
         Unfortunately, it was not discovered that running the Lab Order Checks
         clean up utilities purged old veiled orders. This functionality may 
         have been appropriate for unsigned new orders but not for signed parent
         orders.
      REPORTING package:
       
      HD0000000352115 - Delayed order release event for repeating lab quick 
                        order.
       
         A repeating lab order with a released delay will wrongly copy the value
         Ordering Parameters Location field found in the firing event to the
         Ordering Location of the child order. 
      
    • 294 SEQ #286
      DATE APPLIED:   2011-03-03 11:30:33
      APPLIED BY:   USER,SEVENTEEN
    • 293
      DATE APPLIED:   2011-03-08 13:52:03
      APPLIED BY:   USER,SEVENTEEN
    • 29
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch corrects several problems withg Lab ordering via CPRS List
      Manager.  
      
    • 280
      DATE APPLIED:   2011-03-08 13:52:57
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3*280.
      
    • 337
      DATE APPLIED:   2011-03-08 13:57:21
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3*280.
      
    • 272
      DATE APPLIED:   2011-04-28 16:07:00
      APPLIED BY:   USER,SEVENTEEN
    • 339 SEQ #291
      DATE APPLIED:   2011-06-28 12:31:45
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch resolves the following problems:
       
        Implemented key filtering and range checking for daily dosages. Problem 
        with auto-calculation of daily dosage, and problem changing tablets in
        daily dosing.
       
        <UNDEFINED> error on start-up, which occurs when entering a New Patient 
        whose most recent INR was cancelled.
          
        Replacing the number of tablets in daily dosing may result in a zero 
        being appended unintentionally.
       
       
        Division by zero error in Rosendaal Report, which occurs when 
        patienthas two consecutive INRs which are identical, one in-range and 
        one-out, due to goal range change. 
          
        Problem where lab orders were not being placed by Anticoagulator unless 
        a note was also written. This was happening because the Order Entry API 
        requires an Encounter Location, and the corresponding variable was only 
        being set if a note was also entered.
       
        Assure that cosigner is identified as primary provider in PCE, if user 
        Problem where changes in the patient location were not being recorded 
        when the user clicked on the Save and Exit button.
          
        The original application didn't allow INRs to be ordered for collection 
        on the weekend. Site's reported that they often need to order for 
        weekend collection. The application was modified to inform the user 
        that the date they selected for the next draw is a Saturday (or 
        Sunday), and allow them to leave it or change it, as they deem 
        appropriate.
        is a non-Provider (e.g., Student, Pharmacy Tech, etc.).
       
        Problem with Other Indication not being "remembered" between sessions.
          
        Assure that Scheduled (in addition to Pending or Active) Consults get 
        completed when Initial Note is filed.
      
    • 346 SEQ #292
      DATE APPLIED:   2011-08-12 13:59:33
      APPLIED BY:   USER,SEVENTEEN
    • 333
      DATE APPLIED:   2011-09-08 14:09:05
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
       This patch will correct an issue with complex orders entered through
       CPRS. If the complex order uses a THEN conjunction and the admin time of 
       a single section of the order is before the current time, that
       administration was being dropped off. This would only happen on a section
       of the complex order other than the first section.
      
    • 338 SEQ #294
      DATE APPLIED:   2011-10-13 11:46:09
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct an index out of bounds error that occurs when a 
      user adds too many coversheet reports to the CPRS gui.
      
    • 329 SEQ #295
      DATE APPLIED:   2011-10-21 11:33:40
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Unseen orders are being auto-unflagged when processing a flagged orders 
      alert.
       
      A flagged order recipient doesn't see a notification if an order is 
      flagged too soon after a previous flagged order.
      
    • 332 SEQ #296
      DATE APPLIED:   2011-11-29 12:49:10
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 297 SEQ #297
      DATE APPLIED:   2011-12-12 15:14:26
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. Patch OR*3*281 added a temporary menu option and routine to the system
      be used. This patch removes PHARMACY as an option.
      4. Enter/edit quick orders [ORCM QUICK ORDERS] option would get an 
      undefined error when editing the infusion rate field if the text was over 
      20 characters in length.
      to assist in cleaning up Radiology quick orders. This patch removes that
      option and routine. HD0000000218893
      2. Patch OR*3*299 added a temporary routine to the system to clean up 
      problem Outpatient medication orders. This patch removes that routine.
      HD0000000284146
      3. Enter/edit QO restriction [ORCM QO ITEMS] allows PHARMACY as a 
      restriction. However, the code that processes restrictions does not check 
      for this. The workgroup decision was that the specific package needed to 
      
    • 36
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 204 SEQ #298
      DATE APPLIED:   2012-01-04 09:10:18
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Problem:
       
      Resolution:
      Modified routine ORCACT0 to disallow the transfer of a complex order with 
      THEN as the conjunction.
       
      Associated Remedy:
      ==================
      HD0000000205100  -  1 Complex Orders Transferring for Providers
       
       
      A site reported a problem with the transfer of complex Outpatient 
      Associated NSR(s):
      ==================
      N/A
       
       
      Test Sites:
      ===========
      Medication orders that contained a conjunction of THEN. The problem is 
      that when the order goes (in its entirety) to Inpatient Medications there 
      is no way for the provider or the finishing pharmacist to determine how 
      far into the process the order has progressed.
       
      The patient safety workgroup recommended that transfer of Outpatient 
      medication orders with a THEN conjunction should be prevented.
      
    • 318 SEQ #299
      DATE APPLIED:   2012-01-04 09:10:27
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects an issue within the ORDER ENTRY/RESULTS REPORTING 
      package:
       
      HD0000000343856 - If there are multiple lab orders in a given day then
      the Lab Orders clinical report will only display one.
      
    • 347 SEQ #300
      DATE APPLIED:   2012-01-13 10:50:47
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct the following issues:
       
      4)Incorrect data is showing up on the Search orders by Nature or Status 
        [OR NATURE/STATUS ORDER SEARCH] report.
      1)Relative dates are not saving time in custom views in the CPRS orders 
        tab.
       
      2)Data on the clinical surgery report is hanging over from one item to 
        another.
       
      3)When creating a new patient movement, discontinued orders are 
        displaying on the "Copy active orders for selected event" dialog
      
    • 324 SEQ #301
      DATE APPLIED:   2012-02-01 11:43:20
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct the following issues
      and/or dietetic orders, the auto discontinue of these orders is not being
      recorded in the OE/RR PATIENT EVENT file (#100.2). There is also a rare
      circumstance in which if the user discharging the patient is assigned to a
      different division than the location of the ward. The entry to the OE/RR
      PATIENT EVENT file (#100.2) is not created.
      When a patient is discharged and the user, at the Review Delayed Orders 
      prompt, enters "^^" or lets the system timeout the discharge process does
      not fully complete. Once the Review Delayed Orders prompt is exited in one
      of the ways described above, processes that are supposed to take place
      during the discharge don't happen. This is causing some orders to not
      discontinue.
       
      It was discovered that if a patient is discharged and only has pharmacy 
      
    • 340 SEQ #302
      DATE APPLIED:   2012-02-13 14:06:40
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch is part of the Identification of Principal Mental Health
      Provider(IPMHP) project.  It is to be released in conjunction with PCMM
      patch SD*5.3*575, with SD*5.3*575 being installed first.  The purpose of
      this patch is to implement the API being released in SD*5.3*575 to display
      the Principal Mental Health Provider in two locations within CPRS GUI, one
      being the patient detail display and the other being the Primary Care
      button detailed display.
      
    • 327 SEQ #303
      DATE APPLIED:   2012-03-23 12:51:47
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1.  HD0000000377325 - 9 SHWTLT+10^XPAREDT3 Error 
          selection.
       
       3. HD0000000300224 - 2 LAB QUICK ORDER
          --------------------------------------------
          When building a quick order the How long field does not properly
          apply the Max days limit when using Xnumber of times format.
       
       4. HD0000000406792 - 3 Standard Schedule (Changed) Creates Endless 
          Loop for Finishing Pharmacist
          --------------------------------------------
          --------------------------------------------
          When renewing an order with an invalid/changed schedule, IV orders
          are not properly verified.
          Selecting the GUI Reports User Display Parameters option causes a 
          SHWTLT+10^XPAREDT3 Error.
       
       2. HD0000000069559 - 9 PUG-1101-51042  Can't change user values-Report 
          parameters 
          --------------------------------------------
          The GUI Reports User Display Parameters option does not allow user 
      
    • 314 SEQ #304
      DATE APPLIED:   2012-03-29 18:37:06
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects an issue with a recursive lookup that causes a very
      long pause in the software.  It also corrects a situation where a user
      can select a large number of items to replace, but only some of them are
      updated.
      
    • 284 SEQ #305
      DATE APPLIED:   2012-04-18 16:26:52
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. The Display Patient Alerts and Alert Recipeients [ORB3 ALERT
      information is written over the previous information. This patch corrects 
      this problem by having the chart review information behave the same as the
      other verify actions. If an action is chart reviewed, and the previous
      action was not chart reviewed, the current chart review information is
      used for the previous action. HD0000000268742
      RECIPIENTS] option always uses the default action of 'Close' - even when 
      there is more than one screen of alerts. This patch modifies this 
      behavior so that if a screen is not the last screen of the display, the 
      default action is 'Next Screen'. HD0000000069366
      2. The Orders tab detailed display shows the order along with the most
      recent Chart Review information. However, when there is a change to the
      original order, and that change has a chart review performed, the detail
      information is incorrect. The problem is that the current chart review 
      
    • 341 SEQ #306
      DATE APPLIED:   2012-08-29 12:17:49
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct the following issues:
      3)A subscript error when an ordernumber of 0 is sent back to the ORWDX1 
      ORDMATCH Remote procedure call.
      1)An undefined error when a patient in observation is discharged.
       
      2)When using the Manage orderable items [ORCM ORDERABLES MENU] for 
      editing orderable items, orderable items are selectable for edit by 
      internalentry number (IEN) even if they are not in the appropriate 
      display group.
       
       
      
    • 322 SEQ #307
      DATE APPLIED:   2012-08-29 12:23:03
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects 4 issues within the ORDER ENTRY/RESULTS REPORTING 
         option Medication Quick Order Report [OR MEDICATION QO CHECKER]. If 
         the user enters a lower case letter 'n' the report runs anyway.
       
      3. When using the remove function for VistA option Team List Mgmt Menu
         [ORLP TEAM MENU] the special number '999' is used to display more 
         patients. When the list contains more than 998 patients, the entry
         '999' removes the patient in position 999 instead of displaying more
         patients.
       
      4. When using the remove function for VistA option Team List Mgmt Menu
      package:
         [ORLP TEAM MENU] the special number '999' is used to display more 
         patients. When the list contains more than 39 patients and one of the 
         patients has an IEN of 999, the entry '999' has you select between the 
         patient and the more option.
       
      1. Cancelling orders from a Delayed Orders list in CPRS (Computerized 
         Patient Record System) GUI (Graphical User Interface) causes them 
         to appear in the Active Orders list. They should be filtered out 
         until the release event happens.
       
      2. Patch OR*3*296 added the prompt 'Do you wish to continue?' to Vista
      
    • 2
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch is described in the National Patch Module under OR*3*2.
      
    • 34
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 357
      DATE APPLIED:   2012-08-29 12:24:52
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module 
      under OR*3.0*357.
      
      
    • 362 SEQ #309
      DATE APPLIED:   2012-11-01 11:57:08
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The purpose of this patch is to provide a software bug fix for CPRS.  
      This patch corrects the following issue:
       
      -Schedule change error for IMO orders
      
    • 331 SEQ #310
      DATE APPLIED:   2012-11-13 16:03:17
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects 4 issues within the ORDER ENTRY/RESULTS REPORTING 
       
      3. Copying a lab order with a static date results in a new order with a 
         blank date.
       
      4. Copying a lab order will not generate a duplicate check against the
         original order.
      package:
       
      1. Copying a generic order that used static dates (eg Jul 9, 
         2010) instead of relative dates (eg T+3) may result in a new order with
         invalid dates.
       
      2. Renewing a nursing order with static dates may result in a new order 
         with invalid dates.
      
    • 313 SEQ #311
      DATE APPLIED:   2013-01-03 11:51:31
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch updates the OE/RR NOTIFICATION (#100.9) alert CONSULT/REQUEST
      UPDATED to inform the user of all actions that triggers the alert. The 
      patch also updates the ORDER DIALOG (#101.41) entry GMRCOR REQUEST to 
      always prompt the user with the RELATED SERVICES saved on the Quick Order 
      and allow them to change it, if needed.  The help text when creating a 
      new prompt has been updated to remove the "subfile" wording.
      
    • 351 SEQ #312
      DATE APPLIED:   2013-01-03 11:51:39
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct the following
       
      1. When a patient has changed clinics and is displaying on the team 
         list for the new clinic. They are not being removed from the old
         clinic's team list.
       
      2. When listing all patients on a clinic team list using the 
         Anticoagulation Patinet Lists [ORAM PATIENT LIST MENU] option, patients
         whos name begins with the letter Z do not show up.
      
    • 352 SEQ #313
      DATE APPLIED:   2013-02-12 10:38:12
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This is a companion patch to the Medication Order Check Healthcare 
      Application (MOCHA) version 1.0 Enhancements 1 group of patches that will
      resolve a number of issues with the Computerized Patient Record System
      (CPRS) version 3.0 order checking functionality. See the patch message for
      a full listing of issues addressed and installation instructions.
      
    • 315 SEQ #314
      DATE APPLIED:   2013-02-13 12:02:14
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1. In the Computerized Patient Record System (CPRS), on the Labs tab,
      2. In CPRS, on the Labs tab, under Microbiology, the accession number
      display should be changed to show the COTS accession number. This patch
      makes this change by looking for the presence of the API GETACC^LRJWLST
      and, if present, uses the API to retrieve the COTS accession number from
      the LAB DATA file (#63). If no COTS accession number is available, the 
      legacy accession number will display.
       
      3. Laboratory V5.2 patch LR*5.2*425 is adding the ability to inactivate a
      collection sample. CPRS will now honor the INACTIVE DATE (#64.9101) field
      in the COLLECTION SAMPLE (#62) file.
      under Anatomic Pathology, the accession number display should be changed
       
      4. An error was occurring in CPRS when attempting to display the Anatomic 
      Pathology supplemental report. The error was caused by a modification 
      done in support of the LEDI v4 release. In order to eliminate the error, 
      a modification was done to CPRS to support the LEDI v4 change.
       
      5. There are two new order reasons being used by Laboratory V5.2. They 
      are Obsolete Order and Purged Order. A request was made that these two 
      reasons be added to the ORDER REASON file (#100.03). The post install of 
      this patch will automatically add these reasons.
      to show the Commercial-Off-The-Shelf (COTS) accession number. This patch
       
      6. The Lab users have requested that when certain fields are updated in 
      the LABORATORY TEST (#60) file, there should be a CPRS call made to search
      for quick orders that contain the test that was updated. If any are found,
      the appropriate personnel will be notified. This patch addresses this
      issue by creating a new routine ORLRQO that will search for the specified
      test and notify the members of the OR CACS mail group. They will be told
      the quick order name and whether it is active or inactive.
       
      7. Since the COTS system, when present, will now be considered the Lab
      makes this change by looking for the presence of the Application
      system of record, the date/time completed from the COTS system should be
      what is stored in the Lab system as the date/time completed. However, this
      might cause some concern on the CPRS side since there may be a delay if
      the interface from VistA to the COTS system is down for any reason. In
      order to help mitigate this issue, this patch will modify the information
      stored in the RESULTS DATE/TIME field (#71) of the ORDER file (#100) to
      contain the date/time the results information was sent to CPRS, rather
      than the date/time completed from the COTS system.
       
      8. Laboratory V5.2 patch LR*5.2*425 is adding the ability to inactivate a
      Programming Interface (API) GETACC^LRJWLST. If that API exists, CPRS will
      topography. CPRS will now honor the INACTIVE DATE (#64.9103) field
      in the TOPOGRAPHY FIELD (#61) file.
       
      9. The Laboratory Lab System Re-engineering project (LSRP) has requested
      an API to allow Lab to unveil an order in CPRS. This patch adds that new
      API.
       
      10. LSRP has requested an API to update the PACKAGE REFERENCE field (#33) 
      of the ORDER file (#100). This patch adds that new API.
      use it to retrieve the COTS accession number from the LAB DATA file 
      (#63). If no COTS accession number is available, the legacy accession 
      number will display.
       
      
    • 348
      DATE APPLIED:   2013-05-16 12:56:04
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module 
      under OR*3.0*348.
      
    • 218
      DATE APPLIED:   2013-06-14 08:59:40
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      CONTAINS COMPONENTS NEEDED TO COMPLETE THE PRE-INSTALLATION OF
      COMPUTERIZED PATIENT RECORD SYSTEM (CPRS) VERSION 29. REFER TO THE PATCH
      DESCRIPTION FOR INSTALLATION INSTRUCTIONS AND COMPONENT INFORMATION.
      
    • 306
      DATE APPLIED:   2013-06-14 09:03:05
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3*306.
      
    • 38
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 371
      DATE APPLIED:   2013-06-14 09:03:27
      APPLIED BY:   USER,SEVENTEEN
    • 366 SEQ #319
      DATE APPLIED:   2013-06-20 11:08:32
      APPLIED BY:   USER,SEVENTEEN
    • 356 SEQ #320
      DATE APPLIED:   2013-08-29 11:11:38
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct the following issues:
       
      3) In certain scenarios, when entries to the Orders File (#100) are  
         deleted, there are dangling cross references that are left behind. 
         These cause errors during nightly processing and cprs order views.
      1) When ordering certain types of quick orders. Information about the 
         order such as service connected and treatment factors display, even 
         though there has been no opportunity to enter this information about 
         the order.
       
      2) When orderable items are flagged to display an alert to the provider 
         when they are expiring. They were not creating alerts correctly for 
         the outpatient paramter.
      
    • 363 SEQ #321
      DATE APPLIED:   2013-09-04 09:45:32
      APPLIED BY:   USER,SEVENTEEN
    • 354 SEQ #322
      DATE APPLIED:   2013-09-05 13:01:32
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct the following issues:
         range (TTR) using the Rosendaal method count inactive patients. 
         This is incorrect because the Rosendaal method makes no mention of 
         missed appointments.
       
      4) It is possible to create progress notes that contain no text. This 
         is caused by the user having the ability to continue and file the 
         note before making a selection about what data to put in the note.
       
      5) The patients lost to follow up utility does not take missed 
         appointments into account. This will cause a provider to incorrectly 
      1) When running the Anticoagulation Management GUI, in some cases 
         believe that a patient has been seen, where he/she may have, in 
         reality, just missed an appointment.
         
      6) Error "'' is not a valid floating point value" is displaying when 
         entering 0.25 as the tablet size for a Monday dose.
         the help file will fail to be found.
        
      2) After a Missed Appointment has been filed, there are cases in 
         which the Daily dosing schedule and total weekly dose don't 
         coincide with what has been entered into the patient notes.
       
      3) The clinic and facility-wide calculation of the time in therapeutic 
      
    • 320 SEQ #323
      DATE APPLIED:   2013-09-10 10:41:20
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects 1 issue within the ORDER ENTRY/RESULTS REPORTING 
      package:
       
      1. The Patient Selection screen can be set up to display a clinic's 
         appointments for a date range. The screen will show no more than 200
         appointments. The screen does not show the user any message that the
         maximum has been reached and that some of the appointments for the date
         range are not being displayed. The appointments dropped can be from any
         part of the date range.
      
    • 380 SEQ #324
      DATE APPLIED:   2013-10-18 16:27:55
      APPLIED BY:   USER,SEVENTEEN
    • 266 SEQ #325
      DATE APPLIED:   2013-12-12 14:11:53
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      In support of the Clinic Orders project, a need has been identified to 
      send Nurse Verify information from the Computerized Patient Record System 
      V. 1.0 to Inpatient Medications V. 5.0. The purpose of this patch is to 
      make this modification.
      
    • 372 SEQ #326
      DATE APPLIED:   2014-01-06 16:15:59
      APPLIED BY:   USER,SEVENTEEN
    • 383 SEQ #327
      DATE APPLIED:   2014-02-05 14:16:54
      APPLIED BY:   USER,SEVENTEEN
    • 39
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Delayed orders for allergies were not properly released to the ADVERSE
      orders were being left in an active status. This caused confusion in the
      display of allergy orders. 
       
       
      This patch will correct the above problems.
       
       
      This patch includes one new protocol, OR GMRA UPDATE and also includes the
      GMRAOR ALLERGY ENTER/EDIT order dialog. 
       
      REACTION TRACKING (ART) package upon patient movement. The status of the
      Changes have been made to the GMRAOR ALLERGY ENTER/EDIT order dialog and
      its items in support of allergy entry via the CPRS GUI. 
       
      A new routine ORMGMRA is also exported with this patch.
      orders was not properly updated to active upon patient movement.
       
      When an order for NO KNOWN ALLERGIES was entered, these orders were not
      displaying properly with allergy orders. The post-install for this patch
      will correct the "AW" cross-reference on all NKA orders in the file.
       
      When a reaction to a causitive agent was entered, pre-existing NKA
      
    • 349 SEQ #328
      DATE APPLIED:   2014-02-20 15:04:01
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch will correct the following issues:
        
      4) When a mail message from AudiCare Auto-renwal is alerting about an 
         invalid Provider status, the provider in question is not known.
      1) Parameter definition description missing for OR AUTORENEWAL USER.
       
      2) Renewed prescriptions processed by AUDIOCARE are showing the user 
         who processed audiocare renewals as the person who entered the 
         renewal.
       
      3) Mail messages from AudioCare Auto-renewal are not displaying 
         enough information to identify a patient in CPRS.
      
    • 370 SEQ #329
      DATE APPLIED:   2014-03-07 08:55:29
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Prevent notes without text from being signed
      
    • 345
      DATE APPLIED:   2014-04-07 17:23:33
      APPLIED BY:   USER,SEVENTEEN
    • 311
      DATE APPLIED:   2014-04-07 17:24:03
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      CONTAINS FOLLOW-UP FIXES FOR ORDER ENTRY/RESULTS REPORTING SOFTWARE 
      VERSION 3.0 PATCH 345 (OR*3*345). REFER TO THE PATCH DESCRIPTION FOR 
      INSTALLATION INSTRUCTIONS AND COMPONENT INFORMATION.
      
    • 381
      DATE APPLIED:   2014-04-07 17:24:18
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      THIS PATCH CORRECTS THE SAME PATIENT SAFETY ISSUE CORRECTED IN PATCH 
      OR*3*380, HOWEVER, IT INCORPORATES OTHER CHANGES MADE BY PATCH OR*3*311, 
      PART OF THE MOCHA 2 BUILD. REFER TO THE PATCH DESCRIPTION FOR A DETAILED 
      EXPLANATION.
      
    • 367 SEQ #333
      DATE APPLIED:   2014-04-14 10:46:38
      APPLIED BY:   USER,SEVENTEEN
    • 384 SEQ #334
      DATE APPLIED:   2014-04-14 10:46:45
      APPLIED BY:   USER,SEVENTEEN
    • 334 SEQ #335
      DATE APPLIED:   2014-04-21 16:06:48
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects 1 issue within the ORDER ENTRY/RESULTS REPORTING 
      package:
       
      1. The Auto-unflagging of orders with the ORPF AUTO UNFLAG parameter set
         to YES has resulted in pharmacy queries or reccomendations not being
         read or responded to.
      
    • 375 SEQ #336
      DATE APPLIED:   2014-04-23 09:19:37
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Delayed order-Framestack-Cumulative Report fixes
      
    • 286 SEQ #337
      DATE APPLIED:   2014-04-24 14:17:21
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects 3 issues within the ORDER ENTRY/RESULTS REPORTING 
         the Cover Sheet and the Vitals entry form.
      package:
       
      1. Changing an unsigned order does not update the entering provider.
       
      2. Chart Copies are enabled for printing even when no format has 
         been set up.
       
      3. There is a discrepancy in metric measure conversions for weight between
      
    • 27
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 379 SEQ #338
      DATE APPLIED:   2014-06-10 09:39:13
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Modified the API LMENTRY^ORB3U1 to properly parse out the alert message 
      containing the CV tagged data in addition to the current parsing 
      mechanism in place.
      
    • 388 SEQ #339
      DATE APPLIED:   2014-06-24 11:16:20
      APPLIED BY:   USER,SEVENTEEN
    • 361
      DATE APPLIED:   2014-08-05 16:37:19
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3*361.
      
    • 392 SEQ #341
      DATE APPLIED:   2014-08-07 10:07:29
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      CPRS RPC changes for the VIA project. See patch description for further 
      details.
      
    • 374 SEQ #342
      DATE APPLIED:   2014-08-11 17:34:40
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      See patch description for full content description.
      
    • 386 SEQ #343
      DATE APPLIED:   2014-08-14 14:37:22
      APPLIED BY:   USER,SEVENTEEN
    • 394 SEQ #344
      DATE APPLIED:   2014-08-26 17:01:36
      APPLIED BY:   USER,SEVENTEEN
    • 111 SEQ #345
      DATE APPLIED:   2014-09-02 12:55:02
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The purpose of this patch is to provide an API to Pharmacy for returning 
      the nature of order for a CPRS order.
      
    • 273 SEQ #346
      DATE APPLIED:   2014-09-05 10:09:25
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects 6 issues within the ORDER ENTRY/RESULTS REPORTING 
      4. CPRS will allow a duplicate team list name when entering personal 
         lists.
       
      5. Occasionally, the option ORLP3M DISPLAY LIST SOURCE displays the
         current user's list source instead of the selected user.
       
      6. Various ORLP options do not timeout when selecting a list in use 
         elsewhere.
      package relating to team lists:
       
      1. Error on entering "^" at the Type prompt of option ORLP TEAM ADD.
       
      2. Team list visibility is changed when edited.
       
      3. Locks are set late when creating or renaming lists.
       
      
    • 385
      DATE APPLIED:   2014-09-05 10:11:38
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3.0*385.
      
    • 9
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Note: This patch can only be installed at sites running CPRS.
      From: SHAPIRO.NANCY@SANFRANCISCO.DOMAIN.EXT    Page 1
      --------------------------------------------------------------------------
       
      I stumbled onto this minor problem.  If I access options in
      the following order, I get my DUZ displayed instead of my name.
       
      PATIENT LIST MGMT MENU
       DISPLAY USER'S TEAMS
      TEAM LIST MGMT MENU
       EXAMINE/PRINT EXISTING LIST(S)  <--- DUZ appears instead of user's name
       
       
      Select Patient List Mgmt Menu Option [TEST]: ?
       
         PS     Patient Selection Preference Mgmt ...
         TM     Display User's Teams
         PT     Display Patients Linked to a User via Teams
         TE     Team List Mgmt Menu ...
       
      Select Patient List Mgmt Menu Option [TEST]: TM  Display User's Teams
       
      Addresses NOIS: SFC-0198-60744
      Find teams linked to user: SHAPIRO,NANCY//          NS     IRM
       
       
                   SHAPIRO,NANCY IS ON THE FOLLOWING TEAMS:
       
      12/31/97                                      PAGE:  001
      --------------------------------------------------------------------------
      1 NANCY
       
       
       
      Select Patient List Mgmt Menu Option [TEST]: ?
       
         PS     Patient Selection Preference Mgmt ...
         TM     Display User's Teams
         PT     Display Patients Linked to a User via Teams
         TE     Team List Mgmt Menu ...
       
      Select Patient List Mgmt Menu Option [TEST]: TE  Team List Mgmt Menu
      Select Team List Mgmt Menu Option [TEST]: ?
       
      Fixes a team list display problem as reported and described by Nancy
         CR     Create/Add to      Team List
         EX     Examine/Print      Existing List(s)
         PR     Remove             Providers from a List
         PT     Remove             Patients from a List
         DE     Delete             Existing List(s)
         AL     Remove             Autolinks
       
      Enter ?? for more options, ??? for brief descriptions, ?OPTION for help
      text.
       
      Shapiro at San Francisco:
       Select Team List Mgmt Menu Option [TEST]: EX  Examine/Print      Existing
       
       Select LIST to examine/print: 1003201// 
       
       
      Subj: CPRS TEAM DISPLAY PROBLEM  [#491781] 31 Dec 97 10:59 PDT  74 Lines
      
    • 353 SEQ #348
      DATE APPLIED:   2014-09-05 10:11:56
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The International Classification of Diseases, Tenth Revision (ICD-10) 
      alpha-numeric characters. This value does not include the decimal point, 
      which follows the third character for the ICD-10-CM code set. There is no 
      decimal point in the ICD-10-PCS code set. 
       
      These code sets have the potential to reveal more about quality of care, 
      so that data can be used in a more meaningful way to better understand 
      complications, better design clinically robust algorithms, and better 
      track the outcomes of care. ICD-10-CM also incorporates greater 
      specificity and clinical detail to provide information for clinical 
      decision making and outcomes research.
      Class 1 Software Remediation project replaces the 30-year-old set of 
      diagnosis and procedure codes (ICD-9-CM) that medical personnel use. 
      Dates of service, or dates of discharge for inpatients, that occur on or 
      after the implementation date will use the ICD-10 code set. Clinical 
      Modification (ICD-10-CM) diagnosis codes increase from about 13,000 ICD-9 
      codes to more than 68,000. Procedure Coding System (ICD-10-PCS) procedure 
      codes increase from about 3,800 ICD-9 codes to nearly 87,000. Both 
      systems also expand the number of characters allotted to seven 
      
    • 404
      DATE APPLIED:   2014-11-10 16:46:17
      APPLIED BY:   USER,SEVENTEEN
    • 398
      DATE APPLIED:   2015-01-28 15:54:31
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3.0*398.
      
    • 312 SEQ #351
      DATE APPLIED:   2015-03-17 16:46:04
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 391
      DATE APPLIED:   2015-05-20 09:11:02
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The description of this patch may be found in the National Patch Module
      under OR*3.0*391.
      
    • 406
      DATE APPLIED:   2015-09-16 11:10:12
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Sets the ORWRP TIME/OCC LIMITS INDV parameter at the Package level for 
      several OE/RR REPORT file entries.
      
    • 418 SEQ #354
      DATE APPLIED:   2015-09-16 11:26:05
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Emergency release of 30.A to address ICD10 issues.
      
    • 409 SEQ #355
      DATE APPLIED:   2015-10-07 16:04:50
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The purpose of this patch is to provide a software bug fix for CPRS 
      orders functionality.  This patch addresses the following issues:
       
      -'Treating Specialty' disappears when order is renewed or Give Additional 
      Dose Now is selected.
      
    • 410
      DATE APPLIED:   2015-12-01 17:42:29
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch corrects 2 issues within the ORDER ENTRY/RESULTS REPORTING 
      package:
       
      1. Non-OERR alerts are being deleted without the rights to do so.
       
      2. Typo in the CPRS User Guide:GUI Version.
      
    • 387
      DATE APPLIED:   2015-12-11 14:36:43
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This build changes the source of Primary Care information in the 
      header and details wondow from VistA to PCMMR.
      
    • 43
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See description on patch message.
      
    • 411 SEQ #358
      DATE APPLIED:   2015-12-11 14:40:41
      APPLIED BY:   USER,SEVENTEEN
    • 402 SEQ #359
      DATE APPLIED:   2016-01-08 11:42:23
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      OR*3.0*402
      
    • 395 SEQ #360
      DATE APPLIED:   2016-01-27 15:27:37
      APPLIED BY:   USER,FIFTYFOUR
    • 389 SEQ #361
      DATE APPLIED:   2016-03-10 14:52:31
      APPLIED BY:   USER,FIFTYFOUR
    • 350
      DATE APPLIED:   2016-03-10 15:48:08
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This build contains the OE/RR items affected by the rename of EARLIEST 
      DATE (123;17) to CLINICALLY INDICATED DATE.
      This build should restore the M routines, order dialogs, and ORCDGMRC
      EARLIEST DATE DEFAULT parameter to a pre-OR*3.0*350 state.
      
    • 424
      DATE APPLIED:   2016-03-10 17:00:55
      APPLIED BY:   USER,FIFTYFOUR
    • 390
      DATE APPLIED:   2016-04-07 16:02:28
      APPLIED BY:   USER,FIFTYFOUR
    • 426 SEQ #365
      DATE APPLIED:   2016-05-04 12:53:04
      APPLIED BY:   USER,FIFTYFOUR
    • 269
      DATE APPLIED:   2016-05-26 15:49:16
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      CONTAINS ROUTINE UPDATES THAT WILL ENABLE COMPUTERIZED PATIENT RECORD 
      SYSTEM (CPRS) VERSION 1.0.29 TO DISPLAY SIGNS/SYMPTOMS WITH MEDICATION 
      ORDER CHECK MESSAGES AND WILL ENABLE REMOTE DATA INTEROPERABILITY (RDI) 
      TO RETRIEVE SIGN/SYMPTOM, SEVERITY, AND OBSERVED/HISTORICAL DATA FOR AN 
      ADVERSE REACTION FROM THE HEALTH DATA REPOSITORY (HDR). REFER TO THE 
      PATCH DESCRIPTION FOR INSTALLATION INSTRUCTIONS AND FURTHER INFORMATION.
      
    • 433 SEQ #367
      DATE APPLIED:   2016-09-16 13:40:41
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      OR RPC updates for VIAB*1*7.
      
    • 26
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 422 SEQ #368
      DATE APPLIED:   2016-09-23 15:53:34
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      The OR*3.0*422 patch allows the use of special characters (particularly 
       
      --------
      With the switch to using CPRS GUI Order Menus rather than ListManager 
      ordering menu options, there remains a limitation on the characters 
      allowed to build menu items.  Specifically, the equal sign (=), comma 
      (,), semi-colon (;), and hyphen (-) are restricted when they do not need 
      to be.
       
      Resolution:
      -----------
      Remove the restrictions on certain special characters by modifying the 
      Use of the following special characters will now be allowed: hyphen (-), 
      CHKNAM tag inside the ORUTL routine in order to remove the restriction 
      for the characters stated above.  The up-arrow (^) still remains as a 
      restricted character because of M (MUMPS) restrictions.
       
      Test Sites:
       
      Hunter Holmes McGuire VA Medical Center (Richmond)
       
      Orlando VA Medical Center
       
      semicolon (;), comma (,), and equal sign (=). Use of the caret (^) is 
      William S. Middleton Memorial Veterans Hospital (Madison)
       
      VA Central Plains Health Care System (Omaha, Lincoln, Grand Island of NE, 
      Des Moines, Knoxville, Iowa City of IA)
       
       
      Documentation Retrieval Instructions
      ------------------------------------ 
       
       
      still restricted because it is used as a field delimiter in VistA. 
      Pre/Post Installation Overview
      ------------------------------
       
       
      Pre-Installation Instructions
      -------------------------
      This patch may be installed with users on the system although it is
      recommended that it be installed during non-peak hours to minimize 
      potential disruption to users.  This patch should take less than 5 
      minutes to install.
       
       
       
      Installation Instructions
      -----------------------------
      1.      Choose the PackMan message containing this patch.
       
      2.      Choose the INSTALL/CHECK MESSAGE PackMan option.  
       
      3.      From the Kernel Installation and Distribution System Menu, select 
              the Installation Menu.  From this menu, you may elect to use the 
      Additional changes will be made to the Data Dictionary elements of the 
              following options. When prompted for the INSTALL NAME enter
              OR*3.0*422.
       
              a. Verify Checksums in Transport Global - This option will 
                  allow you to ensure the integrity of the routines that are in
                  the transport global.
              b. Print Transport Global - This option will allow you to view
                  the components of the KIDS build.
              c. Compare Transport Global to Current System - This option will
                  allow you to view all changes that will be made when this 
      ORDER DIALOG (#101.41) file to modify the Help displayed when entering a 
                  patch is installed.  It compares all components of this patch
                  (routines, DD's, templates, etc.).
              d. Backup a Transport Global - This option will create a backup
                  message of any routines exported with this patch. It will not
                  backup any other changes such as DD's or templates.
       
      4.      From the Installation Menu, select the Install Package(s) option 
              and choose the patch to install.
       
      5.      When prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of
      question mark at a VistA prompt. The affected fields are: 
              Install? NO// Press <Enter>
       
      6.      When prompted 'Want KIDS to INHIBIT LOGONs during the install? 
              NO// Press <Enter>
       
      7.      When prompted 'Want to DISABLE Scheduled Options, Menu Options, 
              and Protocols? NO// Press <Enter>
       
      8.      If prompted "Delay Install (Minutes):  (0 - 60): 0// respond 0.
       
       
       
      Post-Installation Instructions
      N/A
      * ORDER DIALOG (#101.41) file, DISPLAY TEXT (#2) field 
      punctuation) within the Order Menu Management Menu Editor. A previous 
       
      * ORDER DIALOG (#101.41) file, ITEMS (#10) sub-file, DISPLAY TEXT (#4) 
      field 
       
      This intake has been implemented locally at the VA centers in Fargo, ND; 
      Sioux Falls, SD; Meade, MD; Minneapolis, MN; Omaha, NE; Richmond, VA; St. 
      Cloud, MN; Seattle, WA; Milwaukee, WI; Hot Springs, AR; Des Moines, IA; 
      and Iowa City, IA. 
       
      The NSR for this intake addresses the following requirement: 
      VistA patch disallowed use of special characters. The patch was intended 
       
      * VHBAO: NEED3045 Provide the ability for the users to include 
      punctuation and other special characters in CPRS order menu notes.
       
      Patch Components
      ================
       
      Files & Fields Associated:
       
      File Name (Number)       Field Name (Number)       New/Modified/Deleted
      to prevent display problems within ListManager; however, most sites are 
      ---------------------    --------------------      --------------------
      ORDER DIALOG (#101.41)   DISPLAY TEXT (#2)         MODIFIED
       
      ORDER DIALOG,
      ITEMS (#101.412)         DISPLAY TEXT (#4)         MODIFIED
       
       
       
      Forms Associated:
       
      using the Computerized Patient Record System (CPRS) Graphical User 
      Form Name                File #       New/Modified/Deleted
      ---------                ------       --------------------
      N/A
       
      Mail Groups Associated:
       
      Mail Group Name          New/Modified/Deleted
      ---------------          --------------------
      N/A
       
      Interface (GUI) and the inability to utilize punctuation can negatively 
      Options Associated:
       
      Option Name            Type               New/Modified/Deleted
      -----------            ----               --------------------
      N/A
       
      Protocols Associated:
       
      Protocol Name       New/Modified/Deleted
      -------------       --------------------
      impact the clarity of menu options and instructions. This modification 
      N/A
       
      Security Keys Associated:
       
      Security Key Name
      -----------------
      N/A
       
      Templates Associated:
       
      restores the ability to use certain special characters in Order Menu 
      Template Name      Type      File Name (Number)  New/Modified/Deleted 
      -------------      ----      ------------------  --------------------
      N/A
       
      Additional Information:
       
       
      New Service Requests (NSRs)
      ----------------------------
      NSR 20131108 REMOVE LISTMANAGER RESTRICTIONS ON MNEMONICS
      Management so that users can more clearly specify order menu options. 
       
      Patient Safety Issues (PSIs)
      -----------------------------
      N/A
       
      Remedy Ticket(s) & Overview
      ---------------------------
      N/A
       
      Problem:
      
    • 423
      DATE APPLIED:   2016-09-23 15:54:37
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      The description of this patch can be found in the National Patch Module.
      
    • 425 SEQ #370
      DATE APPLIED:   2016-12-12 12:10:14
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Patch OR*3.0*425 allows inpatient delayed 
      specific scenario in which inpatient delayed 
      orders are written for an admission event, 
      but then the patient is not admitted (post 
      treatment/post procedure the patient remains 
      an outpatient) and the delayed orders are 
      required at an outpatient location, such as 
      a Post Anesthesia Care Unit. Under the current 
      functionality, these inpatient delayed orders 
      cannot be released to the outpatient location 
      because the admission event never occurred. 
      orders (with the exception of Unit-Dose 
      After implementation of this patch, the delayed 
      orders (with the exception of Unit-Dose Meds 
      orders and Diet orders) can be successfully 
      released to an outpatient location.
      Meds orders and Diet orders) to be manually 
      released to outpatient locations. Without 
      this modification, care to patients can be 
      delayed while providers re-enter orders 
      previously entered as inpatient orders.
       
      This solution is designed to address the 
      
    • 417 SEQ #371
      DATE APPLIED:   2016-12-20 14:57:32
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      OR*3.0*417 makes changes to order details in support of Bar Code
      order:
       
      1.      PSS*1*191
      2.      PSJ*5*315
      3.      PSB*3*83
      4.      PSB*3*87
      5.      OR*3*417
       
      ATTENTION: This enhancement also includes a new Graphical User Interface
      (GUI) executable, BCMA GUI PSB3_P083.EXE. Installation of this GUI is
      Medications Administration (BCMA) and Inpatient Medications enhancements
      required immediately after the KIDS install for the Patch to function.
       
      For retrieval and installation instructions, please see the Client 
      Installation Instructions section.
       
      **************************************************************************
       
      The change made by OR*3*417 is in support of requirements for patch
      PSB*3.0*83.  All the patches in this group should be installed  prior to 
      patch OR*3.0*417.
      for Transdermal Administrations.
       
      The change will add a line to the Order Details report and the Medication
      Administration History Report in the Computerized Patient Record System
      (CPRS). These reports will display the Removal times for Medications
      that Require Removal (MRRs).
       
      ******************************* ATTENTION ********************************
        
      Clinical Ancillary Services (CAS) Development-Delivery of Pharmacy 
      Enhancements (DDPE) VA Inpatient Medication Administration - Transdermal
      enhancement includes 5 patches which must be installed in the following
      
    • 421
      DATE APPLIED:   2017-01-23 14:26:30
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Changes were needed in OE/RR to store data for the eHMP (Enterprise 
      repository for the eHMP data.
       
      The changes include tracking when an Order was flagged or unflagged by a 
      user.  There were also changes to store clinical data in the JDS for 
      unsigned, as well as signed, orders.  Additionally, discontinued orders 
      now trigger updates to the JDS.
       
      Includes changes related to patches: 286,424,269
      Health Management Platform).  The eHMP needed data that has dates and 
      times with seconds and also required triggers when relevant OE/RR data 
      were created and/or edited.  The OR* namespace routines were modified to 
      call the appropriate eHMP API (application programmer interface) line 
      tags, where needed.
       
      These eHMP APIs store the data with a date and time stamp that has 
      seconds, which are required by the JDS (JSON data store).  The JDS is the 
      
    • 415 SEQ #373
      DATE APPLIED:   2017-03-10 13:27:55
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      OR*3.0*415
      
    • 420 SEQ #374
      DATE APPLIED:   2017-04-03 13:50:25
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Patch OR*3.0*420 modifies the existing Pharmacy package in VistA to
      Item will be displayed in the Information field in the Medication Order 
      -----------------
      N/A
       
       
      Templates Associated:
       
      Template Name      Type      File Name (Number)  New/Modified/Deleted 
      -------------      ----      ------------------  --------------------
      N/A
       
      dialog once an Orderable Item is selected. Once a dispense drug is chosen 
       
      Additional Information:
      N/A
       
       
      New Service Requests (NSRs)
      ----------------------------
      20100311  CPRS LAB MONITORING
       
       
      (by selecting a dosage in the order dialog), the lab test information 
      Patient Safety Issues (PSIs)
      -----------------------------
      N/A
       
       
      Remedy Ticket(s) & Overview
      ---------------------------
      N/A
       
      Problem:
      will be replaced by the National Standard Drug Information found in the
      --------
       
      Resolution:
      -----------
       
       
      Test Sites:
      ----------
      James H. Quillen VA Medical Center (Mountain Home)      
      VA Maryland Healthcare (Baltimore, Loch Raven & Perry Point)        
      MESSAGE (#101) field of the DRUG (#50) file. This message currently
      Tomah VA Medical Center
      Edward Hines Jr., VA Hospital
       
      Software and Documentation Retrieval Instructions:
      ---------------------------------------------------- 
      Software being released as a host file and/or documentation describing the
      new functionality introduced by this patch are available.
       
      The preferred method is to retrieve files from download.vista.domain.ext.
      This transmits the files from the first available server. Sites may also
      shows in CPRS when ordering a dispense drug and is not changed by this
      elect to retrieve files directly from a specific server. 
       
      Sites may retrieve the software and/or documentation directly using Secure
      File Transfer Protocol (SFTP) from the ANONYMOUS.SOFTWARE directory at the
      following OI Field Offices:
         
      Albany:                 fo-albany.domain.ext
      Hines:                  fo-hines.domain.ext    
      Salt Lake City:         fo-slc.domain.ext
         
      modification.
      Documentation can also be found on the VA Software Documentation Library 
      at: http://www4.domain.ext/vdl/
       
      Pre/Post Installation Overview
      ------------------------------
      There are no Pre-installation routines associated with this patch.
       
       
      Pre-Installation Instructions
      -------------------------
       
      This patch may be installed with users on the system although it is
      recommended that it be installed during non-peak hours to minimize 
      potential disruption to users.  This patch should take less than 5 
      minutes to install.
       
       
      Installation Instructions
      -----------------------------
      1.      Choose the PackMan message containing this patch.
       
      Note: Follow-on work to allow persistence of the lab test information in 
      2.      Choose the INSTALL/CHECK MESSAGE PackMan option.  
       
      3.      From the Kernel Installation and Distribution System Menu, select 
              the Installation Menu.  From this menu, you may elect to use the 
              following options. When prompted for the INSTALL NAME enter
              OR*3.0*420.
       
              a.  Verify Checksums in Transport Global - This option will 
                  allow you to ensure the integrity of the routines that are in
                  the transport global.
      the Medication Order dialog is expected to be addressed in CPRS v32.
              b.  Print Transport Global - This option will allow you to view
                  the components of the KIDS build.
              c.  Compare Transport Global to Current System - This option will
                  allow you to view all changes that will be made when this 
                  patch is installed.  It compares all components of this patch
                  (routines, DD's, templates, etc.).
              d.  Backup a Transport Global - This option will create a backup
                  message of any routines exported with this patch. It will not
                  backup any other changes such as DD's or templates.
       
      display the most recent associated lab results when a clinician is
       
      4.      From the Installation Menu, select the Install Package(s) option 
              and choose the patch to install.
       
      5.      When prompted 'Want KIDS to INHIBIT LOGONs during the install? 
              NO// Press <Enter>
       
      6.      When prompted 'Want to DISABLE Scheduled Options, Menu Options, 
              and Protocols? NO// Press <Enter>
       
      7.      If prompted "Delay Install (Minutes):  (0 - 60): 0// enter 0.
      In order to monitor lab results, lab tests are associated with an 
       
       
      Post-Installation Instructions
      ------------------------------
      A site Pharmacy CAC/ADPAC will have to set the OR CPRS LAB DISPLAY 
      ENABLEd parameter to a value of "Yes" using he XPAR MENU TOOLS option 
      in order for this functionality to be accessed.
      Orderable Item using the PSS DRUG ENTER/EDIT option in VistA by entering 
      a lab test in the LAB TEST MONITOR (#17.2) field of the DRUG (#50) file. 
       
      The NSR for this intake addresses the following requirement: 
       
      * VHBAO:NEED126: Ability to display laboratory test results, in a single 
                       view, for ordering inpatient and outpatient medications
                       while viewing the Medication Order dialog in CPRS.
      ordering medication using the Computerized Patient Record System (CPRS)
       
      This modification has been implemented locally at the VA centers in 
      Clarksburg, WV; Hines, IL; Iron Mountain, MI; and Chicago, IL.
       
      This build contains the components for the CPRS Graphical User Interface 
      (GUI) to display relevant laboratory results in the Medication Ordering 
      dialog.
       
      To use the features, the following setup steps are advised:
       * Establish drug-to-lab mapping relationship using the PSS DRUG 
      Inpatient or Outpatient Medication Order dialogs. Without this
         ENTER/EDIT option.  Follow the OUTPATIENT marking pathway to set up a
         LAB MONITOR drug.  Lab name, specimen type and number of days to look
         back are required fields for the program to work.
       
       * If not already set correctly, review the site local terms for SERUM 
         CREATININE and SERUM SPECIMEN in the CPRS Order Check menus.  This is 
         required for calculation of Creatinine Clearance.
       
       * When the lab requested is "Creatinine", a second line for CrCl will be 
         returned.
      modification, the clinician must look in numerous locations for this
       
      The routine ORWDPLM2 is included.  This is a version of the display that
      will work as a TIU OBJECT.  The object method is:
       
      S X=$$SL^ORWDLPM2(DFN,
      $S($G(X0)]"":$P(X0,U),$G(NODE0)]"":$P(NODE0,U),1:""),"^TMP($J,""ORWDPLM2""
      )")
       
      The display is wrapped for ease of reading, but the object method must be 
      entered as part of one single line.
      information. The information is important for safe and effective
       
      Patch Components
      ================
       
      Files & Fields Associated:
       
      File Name (Number)       Field Name (Number)       New/Modified/Deleted
      -----------------------  ------------------------  --------------------
      N/A
       
      medication management. 
      Forms Associated:
       
      Form Name                File #       New/Modified/Deleted
      ---------                ------       --------------------
      N/A
       
       
      Mail Groups Associated:
       
      Mail Group Name          New/Modified/Deleted
       
      ---------------          --------------------
      N/A
       
       
      Options Associated:
       
      Option Name            Type               New/Modified/Deleted
      -----------            ----               --------------------
      N/A
       
      The lab results for the most recent lab test associated with an Orderable 
       
      Protocols Associated:
       
      Protocol Name       New/Modified/Deleted
      -------------       --------------------
      N/A
       
      Security Keys Associated:
       
      Security Key Name
      
    • 440 SEQ #376
      DATE APPLIED:   2017-06-29 15:14:32
      APPLIED BY:   USER,FIFTYFOUR
    • 457
      DATE APPLIED:   2017-06-29 16:13:27
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch will fix the following issue:
      1. Drug Interaction Order Checks
      
    • 436 SEQ #378
      DATE APPLIED:   2017-07-26 13:06:06
      APPLIED BY:   USER,FIFTYFOUR
    • 52 SEQ #37
      DATE APPLIED:   1999-04-27 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch contains corrections to the OE/RR patient selection screen.
      See the National Patch Module for a complete description of the changes.
      
    • 461 SEQ #379
      DATE APPLIED:   2017-07-26 13:57:22
      APPLIED BY:   USER,FIFTYFOUR
    • 458 SEQ #380
      DATE APPLIED:   2017-09-07 18:09:12
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      NOTIFICATIONS SHOWING 'MANDATORY' WHEN THEY ARE NOT
      
    • 454 SEQ #381
      DATE APPLIED:   2017-11-01 12:41:49
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Please see forum for a complete patch description.
      
    • 401 SEQ #382
      DATE APPLIED:   2017-11-02 11:26:24
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Option ORK EDITABLE BY USER, ORQQPL4 RPC fix
      
    • 448 SEQ #383
      DATE APPLIED:   2017-11-02 12:22:22
      APPLIED BY:   USER,FIFTYFOUR
    • 434
      DATE APPLIED:   2017-11-27 13:55:26
      APPLIED BY:   USER,FIFTYFOUR
    • 429
      DATE APPLIED:   2017-12-27 13:40:12
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      The description of this patch can be found in the National Patch Module.
      
    • 456 SEQ #386
      DATE APPLIED:   2017-12-27 16:26:59
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      FLAGGED ORDER SURROGATE NOTIFICATION ISSUE
      
    • 467 SEQ #387
      DATE APPLIED:   2018-01-03 13:39:45
      APPLIED BY:   USER,FIFTYFOUR
    • 449 SEQ #388
      DATE APPLIED:   2018-01-03 13:40:50
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      See patch description for details.
      
    • 49 SEQ #38
      DATE APPLIED:   1999-05-10 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See National Patch Module for full details of enhancements.
      
    • 459 SEQ #389
      DATE APPLIED:   2018-01-29 16:58:08
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Patch OR*3.0*459 addresses the following issue:
       
      1. Anti-Coagulation Show Rate not displaying correct information
      
    • 465 SEQ #390
      DATE APPLIED:   2018-02-28 16:48:21
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch corrects 3 issues within the ORDER ENTRY/RESULTS REPORTING 
       
      3. Users can't remove themselves from patient lists of type "Patient 
         Manual" 
      package:
       
      1. The hard error <UNDEFINED>EN+3^LEXAFIL occasionally and sporadically
         occurs when the user uses a function in CPRS that calls the Remote
         Procedure Call (RPC) ORWPCE4 LEX.
       
      2. The automated monthly controlled substance report to providers is 
         sending the internal id for Prescription instead of the external id.
      
    • 428 SEQ #391
      DATE APPLIED:   2018-03-01 15:12:18
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Patch OR*3.0*428 addresses the following two issues:
       
      1. Undefined error at IN+27^ORDV06B when running the All Medications 
      Report in CPRS for Inpatient orders.     
       
      2.  Undefined error at IN+41^ORDV06B when running the All Medications 
      report in CPRS for Oupatient or Non-VA orders.
      
    • 450 SEQ #393
      DATE APPLIED:   2018-03-01 15:27:04
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Patch OR*3.0*450 will address the following two issues:
      Note: issue 2 is documentation only
       
      1. Flagged Orderable Item Alert not processing all inpatient items in an 
         order
      2. CPRS GUI Technical Manual update Lab test order "other" clarification
      
    • 382
      DATE APPLIED:   2018-03-02 14:08:20
      APPLIED BY:   USER,FIFTYFOUR
    • 469
      DATE APPLIED:   2018-03-02 14:10:35
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      MOCHA 2.1 follow-up
      
    • 474 SEQ #396
      DATE APPLIED:   2018-04-03 16:52:36
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      The purpose of this build is to resolve the problem with Anticoagulation 
      Management Tool (AMT) and how it deals with edits and complications.
       
      R18005975FY18 - Problem with Complications
      
    • 471 SEQ #397
      DATE APPLIED:   2018-04-03 16:55:00
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      ORDER DETAILS, DRUG RESTRICTION, & RENEWED ORDER ISSUES
      
    • 443 SEQ #398
      DATE APPLIED:   2018-04-25 17:28:33
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch corrects a single issue - an error the CPRS Debug report that 
      only occurs if there is unexpected data in the XTMP debug log.
      
    • 462 SEQ #399
      DATE APPLIED:   2018-05-01 14:37:38
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
       
      Patch OR*3.0*462 addresses these 2 issues:
       
      I10009975FY16 - If a user edits an existing diet Quick Order using option 
      [ORCM QUICK ORDERS], the system allows a REGULAR/NPO diet to be ordered 
      with another diet.
       
      I10480945FY16 - Medication orders flagged by a pharmacist that are then 
      updated by the pharmacists cannot then be un-flagged in CPRS or PSJ OE.
      
    • 46 SEQ #39
      DATE APPLIED:   1999-06-02 00:00:00
      APPLIED BY:   USER,ONE
    • 451 SEQ #400
      DATE APPLIED:   2018-05-01 14:40:23
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch corrects 2 issues within the ORDER ENTRY/RESULTS REPORTING 
      package:
       
      1. The show rate calculation skips over visits with an INR that repeats
      the previous visit's INR.
       
      2. When a patient comes in early - 48 hours before the next draw date -
      then it is counted as a missed appointment.
      
    • 452 SEQ #401
      DATE APPLIED:   2018-06-01 15:06:58
      APPLIED BY:   USER,FIFTYFOUR
    • 480 SEQ #402
      DATE APPLIED:   2018-06-01 16:16:16
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch will resolve the following issue: 
      1. Prevent truncation of drug data returned from Pharmacy when finishing 
      an order.
      
    • 414 SEQ #403
      DATE APPLIED:   2018-06-01 16:27:05
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch corrects 3 issues within the ORDER ENTRY/RESULTS REPORTING 
       
      3. When a weight or height entry in to the patient's vitals is marked as
         Pass, Unavailable or Refused the CrCL value for the patient disappears
         even though there is a previous valid entry.
      package:
       
      1. Orderable Items with a value in the Type field of Neither appear as an
         available lab test when ordering in CPRS.
       
      2. When the last creatinine lab has a "canc" result then the CrCL
         calculation will skip all results with the same specimen and go on to
         look at lab results for other specimens. 
      
    • 463 SEQ #404
      DATE APPLIED:   2018-06-01 16:27:44
      APPLIED BY:   USER,FIFTYFOUR
    • 475 SEQ #405
      DATE APPLIED:   2018-06-01 16:29:02
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Bug fixes to RTC Orders
      
    • 482 SEQ #406
      DATE APPLIED:   2018-07-06 12:09:01
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Lab labels print when not requested
      
    • 481
      DATE APPLIED:   2018-07-06 15:43:55
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      MOCHA 2.1B Warranty Issues
      
    • 477 SEQ #408
      DATE APPLIED:   2018-10-04 14:50:21
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch addresses two (2) issues:
      --------------------------------------------
      1. I7370452FY16 - PHARMACY ORDERABLE ITEMS / ORDERABLE ITEMS
         I10581756FY16 (d) 
       
         Problem: 
         --------
         The PHARMACY ORDERABLE ITEMS file (#50.7) NAME field (#.01) is  
         not always synced with the ORDERABLE ITEMS file (#101.43) NAME
         field (#.01).
       
       
         The NAME field (#.01) in the ORDERABLE ITEMS file (#101.43) is  
         a combination of the NAME field (#.01), max length 40, in the 
         PHARMACY ORDERABLE ITEMS file (#50.7) and the NAME field (#.01), 
         max length 30, in the DOSAGE FORM file (#50.606).  There is a  
         space between the two fields and a space at the end of the field.
         This could produce a NAME that is 72 characters in length.  
       
         The problem is that the maximum length for the NAME field (#.01)
         in the ORDERABLE ITEMS file (#101.43) is 63 characters.  This  
         can result in truncation, as well as failed update "pushes" when  
      1.  The PHARMACY ORDERABLE ITEM file (#50.7) NAME field (#.01) is 
         the combination of the Pharmacy Orderable Items Name and Dosage
         Form Name is greater than 63 characters.
       
         The maximum field length for the NAME field (#.01) in the 
         ORDERABLE ITEMS file (#101.43) needs to be increased to 72 
         characters.
       
         Resolution:
         -----------
         A Data Dictionary update has been made to the NAME Field (#.01) in 
          not always synced with ORDERABLE ITEM file (#101.43) NAME field
         the ORDERABLE ITEM file (#101.43) to increase the maximum field 
         length limit to 72 characters.
       
      2. I17614498FY18 - ROOM-BED PRINT DEVICE PARAMETER ISSUES
         
         Problem:
         --------
       
         If a default label printer is defined for a Room-Bed using any of the
         parameters "ORPF CHART COPY PRINT DEVICE ", "ORPF LABEL PRINT DEVICE",
          (#.01).
         "ORPF REQUISITION PRINT DEVICE" and "ORPF WORK COPY PRINT DEVICE", the
         parameter setting is ignored during the CPRS ordering process.
       
         Resolution:
         -----------
       
         Modify routine ORWD2 to determine whether a "device" parameter
         definition exists for the patient's Room-Bed. The "device" parameter 
         descriptions were updated to clarify that the location(s) for each 
         Room-Bed must have the corresponding "prompt" parameter defined in
      2.  Room-Bed default printer parameters are ignored during the ordering 
         order for the Room-Bed device to display.  The CPRS Technical Manual
         was also updated to include that clarification.
          process.
       
      Defect Tracking System Ticket(s) & Overview:
      
    • 487 SEQ #409
      DATE APPLIED:   2018-10-04 14:51:47
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Issues:
       
      2. When invoking option PSSJI SOLN:
       
         a) An error occurs if a solution is defined to have 'UNIT DOSE 
            MEDICATIONS" usage defined as "quick order only".
       
         b) Quick order restrictions are removed if "IV MEDICATIONS" and/or 
            "IV SOLUTIONS" usages are defined as "quick order only".
       
      Resolution:
       
      ----------
       
      Modified routines PSSVIDRG and ORMFN to preserve quick order settings on 
      additives and solutions.  These changes also prevented the error which 
      occurred when a solution or additive was defined to have unit doses as 
      "quick order only".
       
      Routine PSSVIDRG is included in patch PSS*1.0*229 which will be installed 
      along with routine ORMFN in this patch.
      1. When invoking option PSSJI DRUG:
       
         a) An error occurs if an additive is defined to have "UNIT DOSE 
            MEDICATIONS" usage defined as "quick order only".
       
         b) Quick order restrictions are removed if "IV MEDICATIONS" and/or 
            "IV ADDITIVES" usages are defined as "quick order only.
      
    • 13
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 45 SEQ #40
      DATE APPLIED:   1999-06-02 00:00:00
      APPLIED BY:   USER,ONE
    • 492 SEQ #410
      DATE APPLIED:   2018-11-02 15:26:49
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      LAB LABELS INCORRECTLY PRINTED
      
    • 483
      DATE APPLIED:   2018-11-02 15:38:21
      APPLIED BY:   USER,FIFTYFOUR
    • 441 SEQ #413
      DATE APPLIED:   2018-12-03 18:14:18
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Please see forum for a complete description of patch OR*3.0*441
      
    • 484 SEQ #414
      DATE APPLIED:   2018-12-06 16:18:42
      APPLIED BY:   USER,FIFTYFOUR
    • 435 SEQ #415
      DATE APPLIED:   2018-12-06 16:19:19
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      Please see forum for a complete description of patch OR*3.0*435
      
    • 490 SEQ #416
      DATE APPLIED:   2019-01-02 17:41:14
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      The One Consult Admin Key Consult project is being designed to improve 
       
      Remote Procedures Associated:
                                                                New/Modified/
      Remote Procedure Name                                       Deleted   
      ---------------------                                     -------------
      N/A
       
      Security Keys Associated:
                                                                New/Modified/
      Security Key Name                                           Deleted   
      -----------------                                         -------------
      Patch Components
      GMRC ADMIN RBP TO CC                                      New
       
      Templates, Input Associated:
                                                                New/Modified/
      Template Name      Type      File Name (Number)             Deleted   
      -------------      ----      ------------------           -------------
      N/A
       
      Templates, List Associated:
                                                                New/Modified/
      ================ 
      Template Name      Type                                     Deleted   
      -------------      ----                                   -------------
      N/A
       
      Templates, Print Associated:
                                                                New/Modified/
      Template Name      Type      File Name (Number)             Deleted   
      -------------      ----      ------------------           -------------
      N/A
       
       
      Templates, Sort Associated:
                                                                New/Modified/
      Template Name      Type      File Name (Number)             Deleted   
      -------------      ----      ------------------           -------------
      N/A
       
      Additional Information
      ---------------------------- 
      N/A
       
      Files & Fields Associated:
      New Service Requests (NSRs)
      ---------------------------- 
      N/A
       
      Patient Safety Issues (PSIs)
      -----------------------------
      N/A
       
      Defect Tracking System Ticket(s) & Overview
      -------------------------------------------
       
      N/A
       
      Test Sites:
      ----------
      TBD
              
      Documentation Retrieval Instructions
      ------------------------------------
      Updated documentation describing the new functionality introduced by this 
      patch is available.
      File Name (#)                                             New/Modified/
       
      The preferred method is to retrieve files from download.vista.domain.ext. 
      This transmits the files from the first available server. Sites may also 
      select to retrieve files directly from a specific server.
       
      Sites may retrieve the documentation directly using Secure File Transfer 
      Protocol (SFTP) from the ANONYMOUS.SOFTWARE directory at the following OI 
      Field Offices:
       
         Hines:                        fo-hines.domain.ext   
        Sub-file Name (#)         Field Name(Number)              Deleted
         Salt Lake City:               fo-slc.domain.ext
       
      Documentation can also be found on the VA Software Documentation Library 
      at: 
       
      http://www.domain.ext/vdl/
       
      Title                         File Name                       FTP Mode
      -----------------------------------------------------------------------
      N/A      
      -------------------         ------------------            -------------
       
      Patch Installation:
       
      Installation Instructions
      -------------------------
      This patch may be installed with users on the system although it is 
      recommended that it be installed during non-peak hours to minimize 
      potential disruption to users.  This patch should take less than 5 
      minutes to install. 
       
      100                         100.008,80                     New
      Pre-Installation Instructions
      -----------------------------
      N/A
       
      Installation Instructions
      -----------------------------
       
      1.  Choose the PackMan message containing this patch.
       
      2.  Choose the INSTALL/CHECK MESSAGE PackMan option. 
      the current business process used by VistA providers when an imaging order
       
       
      3.  From the Kernel Installation and Distribution System Menu, select
          the Installation Menu.  From this menu, you may elect to use the
          following option. When prompted for the INSTALL enter patch 
          OR*3.0*490:
       
          a.  Backup a Transport Global - This option will create a backup
              message of any routines exported with this patch. It will not
              backup any other changes such as DD's or templates.
          b.  Compare Transport Global to Current System - This option will
      Bulletins Associated:
              allow you to view all changes that will be made when this patch
              is installed.  It compares all components of this patch
              (routines, DD's, templates, etc.).
          c.  Verify Checksums in Transport Global - This option will allow
              you to ensure the integrity of the routines that are in the
              transport global.
          
      4.  From the Installation Menu, select the Install Package(s) option and
          choose the patch to install.
       
                                                                New/Modified/
      5.  When prompted 'Want KIDS to Rebuild Menu Trees Upon Completion of
          Install? NO//NO  
         
      6.  When prompted 'Want KIDS to INHIBIT LOGONs during the install?
          NO// 
                                                                      
      7.  When prompted 'Want to DISABLE Scheduled Options, Menu Options,
          and Protocols? NO//
        
      8.  If prompted "Delay Install (Minutes):  (0 - 60): 0// respond 0.
      Bulletin Name                                               Deleted    
       
      Post-Installation Instructions
      ------------------------------
      For all users who will need to be able to perform the task detailed 
      above, these users will need the "GMRC ADMIN RBP TO CC" security key.
       
      Backout and Rollback Procedure:
      -------------------------------
      This patch contains three RA routines.  The decision to back-out or 
      rollback software will be a joint decision between development team, VA 
      -------------                                             -------------
      site/region personnel and other appropriate VA personnel.
       
      Prior to installing an updated KIDS package, the site/region should have 
      saved a backup of the routines in a mail message using the Backup a 
      Transport Global [XPD BACKUP] menu option (this is done at time of 
      install).The message containing the backed-up routines can be loaded with 
      the "XtractPackMan" function at the Message Action prompt. The Packman 
      function "INSTALL/CHECK MESSAGE" is then used to install the backed-up 
      routines onto the VistA System. 
        
      N/A
      Validation of Roll Back Procedure:
      ----------------------------------
      The Roll Back Procedure can be verified by printing the first 2 lines of 
      the three RA routines contained in this patch using the option First Line 
      Routine Print  [XU FIRST LINE PRINT]. Once the routines contained in the 
      OR*3.0*490 patch have been rolled back, the first two lines of the 
      Routines will no longer contain the designation of patch OR*3.0*490 in 
      the patch list section on line 2.
       
      Back-out/Rollback Strategy:
       
      ---------------------------
      In the event of a catastrophic failure, the Facility CIO may make the 
      decision to back-out the patch.
          
      It is imperative that you have performed a backup of the routines 
      included in this patch prior to installation.
         
      The back-out plan is to restore the routines from the backup created.
         
      No data was modified by this patch installation and, therefore, no 
      Dialogs Associated:
      rollback strategy is required.
         
      To verify the back-out completed successfully, ensure the checksum 
      matches the pre-patch checksum from the patch descriptions.
                                                                New/Modified/
      Dialog Name                                                 Deleted   
      is referred to a Community Care provider. Currently, a user creates a new
      -----------                                               -------------
      N/A
       
      Forms Associated:
                                                                New/Modified/
      Form Name                    File Name (Number)             Deleted   
      ---------                    ------------------           -------------
      N/A
       
      Functions Associated:
      consult, then signs the order on the orders tab.
                                                                New/Modified/
      Function Name                                               Deleted   
      -------------                                             -------------
      N/A
       
      HL Logical Link:
                                                                New/Modified/
      HL Logical Name                                             Deleted   
      ---------------                                           -------------
      N/A
       
       
      HL7 Application Parameters:
                                                                New/Modified/
      HL7 Parameter Name                                          Deleted   
      ------------------                                        -------------
      N/A
       
      HLO Application Registry:
                                                                New/Modified/
      HLO Registry Name                                           Deleted   
      The goal of this project is to automatically sign the consult if the 
      -----------------                                         -------------
      N/A
       
      Help Frames Associated:
                                                                New/Modified/
      Help Frame Name                                             Deleted   
      ---------------                                           -------------
      N/A
       
      Mail Groups Associated:
      consult service name contains -DS or -ADMIN, and the user has the key
                                                                New/Modified/
      Mail Group Name                                             Deleted   
      ---------------                                           -------------
      N/A
       
      Options Associated:
                                                                New/Modified/
      Option Name                  Type                           Deleted   
      -----------                  ----                         -------------
      N/A                                                       
      "GMRC ADMIN RBP TO CC", and then send the consult to community care.
       
      Parameter Definitions:
                                                                                      
      Parameter Name                                            New/Modified/
                                                                Deleted   
      --------------                                            -------------
      N/A
       
      Parameter Template:
                                                                New/Modified/
       
      Template Name                                               Deleted   
      -------------                                             -------------
      N/A
       
      Protocols Associated:
                                                                New/Modified/
      Protocol Name                                               Deleted   
      -------------                                             -------------
      N/A
       
      
    • 494 SEQ #417
      DATE APPLIED:   2019-01-02 17:44:59
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      INC2101638: Missing Text on "Return to Clinic" Orders
      a total of 1 appointment(s)."
       
      Resolution: 
      ----------
       
      Modify routine ORWDXM1 to force the user to edit the order which will 
      include entering a new date. (The same date may be entered for the copied 
      order if that complies with procedures to have two "Return to Clinic" 
      orders for the same clinic and same date.)
       
       
      INC2105632: RTC orders canceled when INTERVAL is zero (0)
       
      Problem:
      --------
       
      When a using the VISTA CPRS CLINICIAN MENU option OR OE/RR MENU CLINICIAN 
      to place a RTC order and the Number of Appointments is greater than one 
      (1), the Interval should not be allowed to be zero (0).
       
      Resolution:
      Problem:
      -----------
       
      The patch modifies the INTERVAL item (OR GTX SCH INTERVAL) for the ORDER 
      DIALOG SD RTC in the ORDER DIALOG file (#101.41).  The modification makes 
      the INTERVAL a required field when the value of the Number of 
      Appointments field is greater than one (1).
      -------
       
      When a "Return to Clinic" order is copied, the text "on or around" is 
      missing before the date.  Example: The order should state "Return to 
      Clinic ABC on or around (Sep 24, 2018) for a total of 1 appointment(s)."  
      Instead, a copied order will state "Return to Clinic ABC Sep 24, 2018 for 
      
    • 493 SEQ #418
      DATE APPLIED:   2019-02-01 14:48:40
      APPLIED BY:   USER,FIFTYFOUR
    • 479 SEQ #419
      DATE APPLIED:   2019-02-01 16:07:13
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      VSR RPC BACKDOOR UPDATES
      
    • 489 SEQ #420
      DATE APPLIED:   2019-03-01 15:42:48
      APPLIED BY:   USER,FIFTYFOUR
    • 53 SEQ #41
      DATE APPLIED:   1999-06-02 00:00:00
      APPLIED BY:   USER,ONE
    • 472 SEQ #421
      DATE APPLIED:   2019-03-05 14:42:01
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      The Mental Health Suicide Prevention - Suicide High Risk Patient 
       
      This patch implements the functionality that allows CPRS to display the 
      DBRS data stored in VistA Registration database.
      Enhancements (SHRPE) effort incorporates enhancements that will modify the
      VistA Registration application and CPRS.
       
      The Disruptive Behavior Reporting System (DBRS) record numbers can now be 
      recorded in the Registration (DG) files that are related to Patient Record
      Flags (PRF) which now provides a convenient reference between VistA and 
      the DBRS. The "Patient Record Flags" screen in CPRS is updated to display
      DBRS numbers entered for the patient.
      
    • 503 SEQ #422
      DATE APPLIED:   2019-05-01 15:52:35
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch addresses two issues:
       
      1. The C index in the OE/RR NOTIFICATIONS file (#100.9) contains entries
         for the .01 NAME field.
       
      2. A Lab VBECS component might have a modifier filed when there should be 
         no modifier.
      
    • 444 SEQ #423
      DATE APPLIED:   2019-05-01 15:57:32
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      This patch is for NSR20130714 Unified Action Profile
      
    • 509 SEQ #424
      DATE APPLIED:   2019-06-04 17:55:45
      APPLIED BY:   USER,FIFTYFOUR
      DESCRIPTION:   
      CPRS GUI corrections for Windows 10
      
    • 505 SEQ #425
      DATE APPLIED:   2019-06-04 18:00:41
      APPLIED BY:   USER,FIFTYFOUR
    • 495
      DATE APPLIED:   2019-07-22 17:10:56
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      OR*3.0*495 - Please refer to the patch description in Forum for 
      installation instructions.
      
    • 510 SEQ #428
      DATE APPLIED:   2019-09-04 10:05:15
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      The patch addresses two (2) issues:
       
      1. Lab order checking for order frequency does not occur for future 
         orders.
       
      2. Lab order checking for duplicate orders does not occur for future 
      orders.
      
    • 496 SEQ #429
      DATE APPLIED:   2019-09-16 09:42:25
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      This patch adds the VETERAN VIDEO CALL URL field to the Hospital Location 
      file, Appointment multiple.
      
    • 427
      DATE APPLIED:   2019-09-30 10:36:54
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      MENTAL HEALTH NCC PROJECT 5.01
      
    • 500 SEQ #430
      DATE APPLIED:   2019-10-03 15:54:16
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      View Alerts Optimization.  Please see OR*3.0*500 Patch Description for 
      details.
      
    • 54 SEQ #42
      DATE APPLIED:   1999-06-02 00:00:00
      APPLIED BY:   USER,ONE
    • 397 SEQ #431
      DATE APPLIED:   2019-10-28 12:15:57
      APPLIED BY:   USER,SIXTYFIVE
    • 514 SEQ #432
      DATE APPLIED:   2019-12-19 13:58:37
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      See the patch description for a full listing of functionality and changes.
      
    • 516 SEQ #433
      DATE APPLIED:   2020-02-11 09:54:15
      APPLIED BY:   USER,SIXTYFIVE
    • 518 SEQ #434
      DATE APPLIED:   2020-02-28 12:57:28
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      Please see the patch description for OR*3.0*518.
      
    • 485
      DATE APPLIED:   2020-04-20 12:40:59
      APPLIED BY:   USER,SEVENTY
      DESCRIPTION:   
      COVID-19 GUI changes supporting patch.
      
    • 377
      DATE APPLIED:   2020-06-24 12:14:49
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      This patch is the M side of CPRS GUI v31B. This patch will be distributed 
      as part of a multi-package build. Please see the entry in the National 
      Patch Module for detailed information about this patch and CPRS GUI v31B.
      
    • 515 SEQ #438
      DATE APPLIED:   2020-07-07 16:07:05
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      Refer to the patch description.
      
    • 531
      DATE APPLIED:   2020-07-13 17:11:31
      APPLIED BY:   USER,SIXTYFIVE
    • 523 SEQ #440
      DATE APPLIED:   2020-08-03 11:21:42
      APPLIED BY:   USER,SIXTYFIVE
    • 525 SEQ #441
      DATE APPLIED:   2020-08-10 12:54:04
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      See patch description.
      
    • 55 SEQ #43
      DATE APPLIED:   1999-06-02 00:00:00
      APPLIED BY:   USER,ONE
    • 507
      DATE APPLIED:   2020-08-24 16:09:10
      APPLIED BY:   USER,SIXTYFIVE
    • 533 SEQ #443
      DATE APPLIED:   2020-08-24 16:11:08
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      Please see the NPM on FORUM for the description.
      
    • 521 SEQ #446
      DATE APPLIED:   2020-09-23 15:28:21
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      ORDER DETAILS DISPLAYING INCORRECT DRUG
      
    • 413
      DATE APPLIED:   2020-09-23 15:43:41
      APPLIED BY:   USER,SIXTYFIVE
    • 530 SEQ #449
      DATE APPLIED:   2020-09-23 16:19:07
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      In CPRS, in the Current Order view of the Orders tab a clinical medication
      order that is placed using a quick order and is subsequently edited by
      changing the drug name, is displayed with a status of dc/edit. This status
      should not display as the Current Order view should only be displaying
      order statuses of active or pending.
      
    • 527 SEQ #445
      DATE APPLIED:   2020-09-23 16:40:41
      APPLIED BY:   USER,SIXTYFIVE
      DESCRIPTION:   
      This patch is being released in conjunction with VBEC 2.3.2 Rev F. 
      Items addressed in VBECS 2.3.2 Rev F are listed in the VistA Blood 
               ii. Compare Transport Global to Current System - This option
                   will allow you to view all changes that will be made when
                   this patch is installed.  It compares all of the components
                   of this patch, such as routines, DDs, templates, etc.
       
          D. Select the Install Package(s) option and choose the patch to
             install. 
        
             i.  If prompted 'Want KIDS to Rebuild Menu Trees Upon Completion
                 of Install? NO//', answer No
      Establishment Computer Software (VBECS) 2.3.2 Rev F Release Notes.
       
            ii. When prompted 'Want KIDS to INHIBIT LOGONs during the install?
                NO//', answer No
        
            iii. When prompted 'Want to DISABLE Scheduled Options, Menu
                 Options, and Protocols? NO//', answer No
       
      Post-Installation Instructions:
       N/A
       
       
      Back-Out/Roll Back Plan:
      ------------------------
       This patch consists of three routines. During the VistA Installation 
       Procedure the installer should back up the modified routines by the
       use of the 'Backup a Transport Global' action (step 2B in
       the Installations Instructions).
        
       If rollback/backout is required, the installer can restore the routines
       using the MailMan message that were saved prior to installing the
       patch.
      Associated ticket(s):
        
       If assistance is needed to rollback/backout the patch, please log a 
       Service Now ticket.
      =====================
       N/A
       
      Associated NSR(s):
      ==================
       N/A
       
       
      Patient Safety Issues (PSIs):
      ============================
       N/A
       
      Participating Test Sites:
      =========================
       
      TBD
       
      A full description of patch changes and implementation process are 
      Defect Tracking System Ticket(s) & Overview:
      ============================================
       
      n/a
       
      Additional Information:
      -----------------------
       
      Blood Bank Team Coordination:
      -----------------------------
      included in the VBECS 2.3.2 Rev F Release Notes.
      EFFECT ON BLOOD BANK FUNCTIONAL REQUIREMENTS: Patch LR*5.2*535 does not 
      contain any changes to the VISTA BLOOD BANK Software as defined by 
      ProPath standard titled: BBM Team Review of VistA Patches.
       
      EFFECT ON BLOOD BANK FUNCTIONAL REQUIREMENTS: Patch LR*5.2*535 does not 
      alter or modify any software design safeguards or safety critical 
      elements functions.
       
      RISK ANALYSIS: Changes made by patch LR*5.2*535 have no adverse effect on 
      Blood Bank software functionality, therefore RISK is none.
       
       
      VALIDATION REQUIREMENTS BY OPTION: Because of the nature of the changes 
      made, no specific validation requirements exist as a result of 
      installation of this patch.
       
      Software and Documentation Retrieval Instructions:
       
      Documentation describing the new functionality introduced by this patch 
      is available on the VA Software Documentation Library at:
      http://www.domain.ext/vdl/application.asp?appid=182
      The Test and Production accounts will be installed separately. There is 
       
      Refer to the VBECS 2.3.2 Rev F Release Notes for a list of the user 
      documentation associated with this revision letter patch.
       
      Additional VBECS information can be accessed on the VBECS SharePoint site 
      at:
      https://dvagov.sharepoint.com/sites/oitepmovbecs
       
       
      Patch Installation:
      no downtime associated with this patch installation. Refer to the VBECS 
      -------------------
       
      Pre-Installation Instructions:
      This patch may be installed with users on the system although it is 
      recommended that it be installed during non-peak hours to minimize 
      potential disruption to users.  This patch should take less than 5 
      minutes to install.
       
      No options need to be disabled during installation.
       
      2.3.2 Rev F Release Notes for further installation details.
       
      Installation Instructions:
       
       1. Choose the PackMan message containing this build. Then select the
          INSTALL/CHECK MESSAGE PackMan option to load the build.
       
       2. From the Kernel Installation and Distribution System Menu, select the
          Installation Menu.  From this menu, 
       
          A. Select the Verify Checksums in Transport Global option to confirm 
       
             the integrity of the routines that are in the transport global.
             When prompted for the INSTALL NAME enter the patch name OR*3.0*527.
       
          B. Select the Backup a Transport Global option to create a backup
             message of any routines exported with this patch. It will not
             backup any other changes such as DDs or templates. 
       
          C. You may also elect to use the following options: 
               i.  Print Transport Global - This option will allow you to view
                   the components of the KIDS build.
      
    • 534 SEQ #450
      DATE APPLIED:   2020-09-28 09:12:46
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch addresses two (2) issues:
      1. The "Display the Notifications a User Can Receive" option does not 
         display the ORB PROCESSING FLAG parameter edits based on Team.
      2. Results might erroneously flag as "critical" in two CPRS reports on 
         the Labs tab.
      
    • 512 SEQ #451
      DATE APPLIED:   2020-09-28 13:50:06
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Clinically indicated date is changing when using T+XXX or +XXX function.
      
    • 528 SEQ #452
      DATE APPLIED:   2020-10-15 12:33:49
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      See patch description for information regarding modifications.
      
    • 519
      DATE APPLIED:   2020-11-12 17:52:19
      APPLIED BY:   USER,SEVENTEEN
    • 31 SEQ #44
      DATE APPLIED:   1999-06-22 00:00:00
      APPLIED BY:   USER,ONE
    • 524 SEQ #455
      DATE APPLIED:   2021-03-04 10:17:31
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The purpose of this patch is to swap the display of Imperial and Metric 
      measurements on the CPRS coversheet display of Vitals. See the patch for 
      a full description.
      
    • 540 SEQ #456
      DATE APPLIED:   2021-03-04 15:39:24
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch corrects the following issue:
       
      If lengthy drug-drug interaction message is transmitted to a remote email 
      address, a buffer error might occur and stall MailMan transmissions.
      
    • 476
      DATE APPLIED:   2021-03-10 12:06:02
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Please see OR*3.0*476 Patch Description for more info.
      
    • 437
      DATE APPLIED:   2021-03-22 12:46:37
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The patch modifies OR routine "OROTHCL" and RPC "OROTHCL GET" to update
      There are no actual code changes made to these components.
      the comments and description to indicate that this code and RPC, in
      addition to Other Than Honorable (OTH), will display the following
      information on the CPRS button at the top of the screen and in the
      associated pop-up window:
      - Presumptive Psychosis (PP) status based on the settings in the PATIENT
        file (#2) and in the INSURANCE VERIFICATION PROCESSOR file (#355.33) 
      - Inactive Patient Record Flags (PRF) assigned to the patient and a
        history of PRF changes.  
      
    • 545b
      DATE APPLIED:   2021-04-20 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*545 on Apr 20, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 545 SEQ #460
      DATE APPLIED:   2021-04-20 15:03:17
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch addresses the following issue:
       
      The order check message might not be accurate when signing a Clinic
      Infusion order.
      
    • 544b
      DATE APPLIED:   2021-04-22 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*544 on Apr 22, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 544 SEQ #461
      DATE APPLIED:   2021-04-22 12:33:10
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch addresses the issue of a hard M error during the patient look 
      up using the last 5 digits of the social security number or the last 
      letter of the last name and the last 5 digits of the social security 
      number.
      
    • 529b
      DATE APPLIED:   2021-04-27 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*529 on Apr 27, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 529 SEQ #462
      DATE APPLIED:   2021-04-27 09:08:39
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Please see the patch description for OR*3.0*529 for more information.
      
    • 56 SEQ #45
      DATE APPLIED:   1999-07-19 00:00:00
      APPLIED BY:   USER,ONE
    • 542b
      DATE APPLIED:   2021-04-29 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*542 on Apr 29, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 542 SEQ #463
      DATE APPLIED:   2021-04-29 14:22:00
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
       
      The patch modifies the ORPRF routine and adds a new ORPRFHST routine to 
      display the history of active patient records flags in a pop-up window 
      associated with the Flag button in CPRS.
      
    • 501b
      DATE APPLIED:   2021-05-04 00:00:00
      DESCRIPTION:   
      Backup of PCE STANDARDIZATION 1.0, PX*1.0*211, PXRM*2.0*42, GMT
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 501
      DATE APPLIED:   2021-05-04 15:57:31
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      To take full advantage of the PCE standardization work, changes to VistA
      Standardization 1.0 Installation Guide.
      
      In the documentation for DATA2PCE the description of the variable PPEDIT,
      which is one of the input parameters to DATA2PCE is:
      
      PPEDIT
      (Optional) If an existing encounter already has a Primary Provider and you
      want to edit it set this to 1.
      
      Although it was documented, DATA2PCE did not actually enforce this, the
      applications that use PCE data are required. These applications include
      primary provider could be edited even when PPEDIT did not equal 1. DATA2PCE
      was changed in PX*1.0*211 to work as documented. After that change, internal
      testing found that the primary provider could no longer be edited from CPRS.
      The cause of this was tracked to the way CPRS was calling DATA2PCE, it was not
      properly passing the PPEDIT parameter. The call to DATA2PCE in the routine
      ORWPCE1 was corrected. 
      
      Clinical Reminders, Health Summary, Problem List, and Order Entry/Results
      Reporting. To make it easier for sites, the builds for PCE (PX*1.0*211),
      Clinical Reminders (PXRM*2.0*42), Health Summary (GMTS*2.7*122), Problem List
      (GMPL*2.0*53), and Order Entry/Results Reporting (OR*3.0*501) are being
      distributed in a multi-package build named PCE STANDARDIZATION 1.0.
      
      For detailed information and installation instructions, please see the PCE
      
    • 550b
      DATE APPLIED:   2021-05-06 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*550 on May 06, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 550 SEQ #465
      DATE APPLIED:   2021-05-06 10:07:44
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      1.      PDMP AoD Health Summary not always displaying manual PDMP notes 
         on the HS report, even though they were documented in the PDMP progress
         note.
       
         Resolution:
         ----------
         Routine ORPDMPHS is modified to not quit when the patient has no data 
         in the PDMP QUERY LOG (#101.62).  Instead, processing will bypass
         displaying the data in PDMP QUERY LOG when no data exists for the
         patient and allowing the data for manually entered PDMP notes to be
         displayed.
       
         Problem:
         -------
         The PDMP ADHOC Health Summary report is supposed to display PDMP 
         queries that were initiated from within CPRS as well as manual queries
         (if the manual PDMP query was documented in the standard PDMP progress
         note). However, if a patient never had a query initiated within CPRS
         (by using the PDMP query button), their manual queries are not showing
      
    • 548b
      DATE APPLIED:   2021-06-01 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*548 on Jun 01, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 548 SEQ #466
      DATE APPLIED:   2021-06-01 16:54:14
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch addresses the following issue:
      1. INC16882015 - Inactivated orderable items can be selected in the 
      option Enter/edit QO restrictions
       
      Associated NSR(s):
      ==================
      N/A
       
      Participating Test Sites:
      =========================
      TBD
       
       
       
      Defect Tracking System Ticket(s) & Overview:
      ===========================================
       
      1.      Inactivated orderable items can be selected in the option 
      Enter/edit QO restrictions 
       
         Problem:
         -------
      1. Inactivated orderable items can be selected in the option Enter/edit 
         Inactivated pharmacy or lab orderable items can be selected when using 
         the option Enter/edit QO restrictions. It was also found that the 'SR
         Search/replace orderables' option also displays inactive Orderable 
         Items to replace orderable items.
       
       
         Resolution:
         ----------
         Routine ORCMEDT6 is modified to display that inactive Orderable Items 
         (OI) are inactive. It will also display that inactive OIs are
      QO restrictions
         inactive on the 'Search for:' and 'Replace with:' prompts in option
         Search/replace orderables.
         
       
      Associated ticket(s):
      =====================
       
      
    • 557b
      DATE APPLIED:   2021-06-10 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*557 on Jun 10, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 557 SEQ #467
      DATE APPLIED:   2021-06-10 10:02:28
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      See patch description for full details.
      
    • 57 SEQ #46
      DATE APPLIED:   1999-07-19 00:00:00
      APPLIED BY:   USER,ONE
    • 547
      DATE APPLIED:   2021-06-17 13:02:28
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      See patch description for OR*3.0*547.
      
    • 546
      DATE APPLIED:   2021-06-17 13:03:08
      APPLIED BY:   USER,SEVENTEEN
    • 539
      DATE APPLIED:   2021-07-01 11:28:00
      APPLIED BY:   USER,SEVENTEEN
    • 556b
      DATE APPLIED:   2021-07-20 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*556 on Jul 20, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 556 SEQ #471
      DATE APPLIED:   2021-07-20 14:19:48
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      This patch addresses the following issue:
       
      If an order dialog is defined containing more than one prompt having the 
      same "ID", information might not be stored when placing the order and/or 
      a software error might occur in CPRS.
      
    • 553b
      DATE APPLIED:   2021-07-26 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*553 on Jul 26, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 553 SEQ #472
      DATE APPLIED:   2021-07-26 13:06:28
      APPLIED BY:   USER,SEVENTEEN
    • 453b
      DATE APPLIED:   2021-07-29 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*453 on Jul 29, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 453 SEQ #473
      DATE APPLIED:   2021-07-29 14:04:26
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      Provider Role Tool changes. For detailed information, please refer to the 
      patch description.
      
    • 560b
      DATE APPLIED:   2021-08-09 00:00:00
      DESCRIPTION:   
      Backup of OR*3.0*560 on Aug 09, 2021
       
      Warning:  Installing this backup patch message will install older versions
      of routines and Build Components (options, protocols, templates, etc.).
      Please verify with the Development Team that it is safe to install.
      
    • 58 SEQ #47
      DATE APPLIED:   1999-07-19 00:00:00
      APPLIED BY:   USER,ONE
    • 560 SEQ #475
      DATE APPLIED:   2021-08-09 12:39:37
      APPLIED BY:   USER,SEVENTEEN
      DESCRIPTION:   
      The purpose of this patch is to revert the functionality for showing 
      metrics Vitals first on the coversheet. See the patch description for a 
      full description.
      
    • 11 SEQ #48
      DATE APPLIED:   1999-09-14 00:00:00
      APPLIED BY:   USER,ONE
    • 42 SEQ #49
      DATE APPLIED:   1999-09-14 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See description on patch message.
      
    • 18
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 48 SEQ #50
      DATE APPLIED:   1999-09-14 00:00:00
      APPLIED BY:   USER,ONE
    • 62 SEQ #51
      DATE APPLIED:   1999-09-14 00:00:00
      APPLIED BY:   USER,ONE
    • 32
      DATE APPLIED:   1999-10-02 00:00:00
      APPLIED BY:   USER,ONE
    • 60 SEQ #53
      DATE APPLIED:   1999-10-03 00:00:00
      APPLIED BY:   USER,ONE
    • 61 SEQ #54
      DATE APPLIED:   1999-10-03 00:00:00
      APPLIED BY:   USER,ONE
    • 67 SEQ #55
      DATE APPLIED:   1999-10-03 00:00:00
      APPLIED BY:   USER,ONE
    • 66 SEQ #56
      DATE APPLIED:   1999-10-19 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See description on patch message.
      
    • 70 SEQ #57
      DATE APPLIED:   1999-10-19 00:00:00
      APPLIED BY:   USER,ONE
    • 51 SEQ #58
      DATE APPLIED:   1999-12-10 00:00:00
      APPLIED BY:   USER,ONE
    • 59 SEQ #59
      DATE APPLIED:   1999-12-10 00:00:00
      APPLIED BY:   USER,ONE
    • 19
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 71 SEQ #60
      DATE APPLIED:   1999-12-10 00:00:00
      APPLIED BY:   USER,ONE
    • 64 SEQ #61
      DATE APPLIED:   1999-12-10 00:00:00
      APPLIED BY:   USER,ONE
    • 76 SEQ #62
      DATE APPLIED:   2000-02-04 00:00:00
      APPLIED BY:   USER,ONE
    • 72 SEQ #63
      DATE APPLIED:   2000-02-29 00:00:00
      APPLIED BY:   USER,ONE
    • 40 SEQ #64
      DATE APPLIED:   2000-03-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See National Patch Module for description of this patch OR*3*40.
      
    • 81 SEQ #65
      DATE APPLIED:   2000-04-05 00:00:00
      APPLIED BY:   USER,ONE
    • 44 SEQ #66
      DATE APPLIED:   2000-04-17 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      See national patch module for description of this patch.
      
    • 75 SEQ #67
      DATE APPLIED:   2000-05-01 00:00:00
      APPLIED BY:   USER,ONE
    • 78 SEQ #68
      DATE APPLIED:   2000-05-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 74
      DATE APPLIED:   2000-05-25 00:00:00
      APPLIED BY:   USER,ONE
    • 15
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch corrects a problem of getting a Null Subscript error when
      printing orders that have no order text.
      
    • 68 SEQ #70
      DATE APPLIED:   2000-06-12 00:00:00
      APPLIED BY:   USER,ONE
    • 83 SEQ #71
      DATE APPLIED:   2000-06-12 00:00:00
      APPLIED BY:   USER,ONE
    • 79 SEQ #72
      DATE APPLIED:   2000-06-12 00:00:00
      APPLIED BY:   USER,ONE
    • 69 SEQ #73
      DATE APPLIED:   2000-06-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 47 SEQ #74
      DATE APPLIED:   2000-06-26 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch filters inactive providers and inactive wards from team
      selection lists during team list maintenance.
      
    • 63 SEQ #75
      DATE APPLIED:   2000-06-26 00:00:00
      APPLIED BY:   USER,ONE
    • 73 SEQ #76
      DATE APPLIED:   2000-07-11 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
       
       
      Corrects dialogs in FH
      
    • 87 SEQ #77
      DATE APPLIED:   2000-07-24 00:00:00
      APPLIED BY:   USER,ONE
    • 86 SEQ #78
      DATE APPLIED:   2000-07-24 00:00:00
      APPLIED BY:   USER,ONE
    • 90 SEQ #79
      DATE APPLIED:   2000-08-16 00:00:00
      APPLIED BY:   USER,ONE
    • 4
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 65 SEQ #80
      DATE APPLIED:   2000-08-16 00:00:00
      APPLIED BY:   USER,ONE
    • 88 SEQ #81
      DATE APPLIED:   2000-08-24 00:00:00
      APPLIED BY:   USER,ONE
    • 93 SEQ #82
      DATE APPLIED:   2000-10-04 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch removes several unused fields from the OE/RR NOTIFICATIONS file
      (#100.9).  See the National Patch Module on FORUM for more details on this
      patch.
      
    • 82 SEQ #83
      DATE APPLIED:   2000-10-27 00:00:00
      APPLIED BY:   USER,ONE
    • 10
      DATE APPLIED:   2000-10-27 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      OR*3.0*10  See National Patch Module for a description of the changes
      incorporated in this patch.
      
    • 89 SEQ #85
      DATE APPLIED:   2000-11-06 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 84 SEQ #86
      DATE APPLIED:   2000-11-27 00:00:00
      APPLIED BY:   USER,ONE
    • 50 SEQ #87
      DATE APPLIED:   2001-01-03 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Please see the patch module on forum for a complete description of
      this patch.
       
      The patch tracker message on forum is message number 29329466.
      
    • 97
      DATE APPLIED:   2001-01-03 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch is a multi-build to address problems with date/time consistency
      RMPR*3.0*54
      GMRC*3.0*19
      as a result of changes implemented in patch HL*1.6*66.  This patch will
      include the following builds.  Please see the individual patch
      descriptions for more detail regarding the changes made.
       
      OR*3.0*97
      GMRA*4.0*16
      FH*5.0*28
      LR*5.2*265
      
    • 91 SEQ #89
      DATE APPLIED:   2001-01-22 00:00:00
      APPLIED BY:   USER,ONE
    • 21
      DATE APPLIED:   1999-04-16 00:00:00
      APPLIED BY:   USER,ONE
    • 98 SEQ #90
      DATE APPLIED:   2001-01-22 00:00:00
      APPLIED BY:   USER,ONE
    • 92 SEQ #91
      DATE APPLIED:   2001-02-02 00:00:00
      APPLIED BY:   USER,ONE
    • 106 SEQ #92
      DATE APPLIED:   2001-02-05 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Patch OR*3.0*92 changed the location where order text is saved.  This
      patch will update two entries in the OE/RR PRINT FIELDS file to
      accommodate this new location.
      
    • 96 SEQ #93
      DATE APPLIED:   2001-02-28 00:00:00
      APPLIED BY:   USER,ONE
    • 99 SEQ #94
      DATE APPLIED:   2001-04-05 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 101 SEQ #95
      DATE APPLIED:   2001-04-05 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      Refer to the patch description on the patch message.
      
    • 108 SEQ #96
      DATE APPLIED:   2001-04-12 00:00:00
      APPLIED BY:   USER,ONE
    • 104
      DATE APPLIED:   2001-04-30 00:00:00
      APPLIED BY:   USER,ONE
    • 107 SEQ #98
      DATE APPLIED:   2001-05-17 00:00:00
      APPLIED BY:   USER,ONE
      DESCRIPTION:   
      This patch distributes the CPRS Performance monitor report.  This report
      is styled after a report developed by VISN 19.  Please see the patch
      description on FORUM for a detailed description of this report.
      
    • 102 SEQ #99
      DATE APPLIED:   2001-05-29 00:00:00
      APPLIED BY:   USER,ONE
    DATE INSTALLED AT THIS SITE:   1999-04-16 00:00:00
    INSTALLED BY:   USER,ONE
    DESCRIPTION OF ENHANCEMENTS:   
    This build contains Order Entry/Results Reporting version 3.0.  It
    is exported as part of the release of CPRS.
    
FILE
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • FIELD:
    • PRIMARY OE/RR MENU
    • SUMMARY DEFAULT
    • PATIENT LIST ORDER
    • DEFAULT RESULTS REPORTING MENU
    • PRIMARY PROFILE MENU
    • PROVIDER LIST
    • SPECIALTY LIST
    • PRIMARY ORDER MENU
    • PRIMARY ORDER DISPLAY FORMAT
    • WARD LIST
    • PATIENT LIST
    • SELECT PATIENT FROM
    • CLINIC LIST
    • CLINIC APPOINTMENT START DATE
    • CLINIC APPOINTMENT STOP DATE
    UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   MERGE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   OVERWRITE
    MAY USER OVERRIDE DATA UPDATE:   NO
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   NO
    MAY USER OVERRIDE DATA UPDATE:   YES
  • UPDATE THE DATA DICTIONARY:   YES
    ASSIGN A VERSION NUMBER:   NO
    MAY USER OVERRIDE DD UPDATE:   NO
    DATA COMES WITH FILE:   YES
    MERGE OR OVERWRITE SITE'S DATA:   MERGE
    MAY USER OVERRIDE DATA UPDATE:   YES
PRINT TEMPLATE
ENVIRONMENT CHECK ROUTINE ORPRE
ENVIRONMENT CHECK DONE DATE 1996-06-13 09:53:51
POST-INITIALIZATION ROUTINE ORPOST
POST-INIT COMPLETION DATE 1996-06-13 09:58:16
PRE-INIT AFTER USER COMMIT ORPRE1
PRE-INIT COMPLETION DATE 1996-06-13 09:54:11
EXCLUDED NAME SPACE
  • ORZ