Sub-Field: 853.012

Parent File	Name	Number	Package
853.01	AR INCOMPLETE REASON TYPE	853.012	VA Point of Service

Details

Field # Name Loc Type Details

Field #	Name	Loc	Type	Details
.01	AR INCOMPLETE REASON TYPE	0;1	SET	INPUT TRANSFORM: `S DINUM=X Q` LAST EDITED: `MAY 10, 2013` HELP-PROMPT: `Choose AR Incomplete Reason Type.` DESCRIPTION: `This field contains description of reason why AR module couldn't be completed.` `The AR Incomplete Reason Type is one of the following:` `1. The AR module could not be started because patient arrived TOO EARLY, TOO LATE, or NOT EARLY ENOUGH at the device. 2. Either the patient walked away in the middle of theAllergy Review or the TIME LIMIT AR` `COMPLETE time expired. 3. The patient selected to exit the Allergy Review. 4. The patient selected to bypass the Allergy Review. 5. Service failure of VetLink at the site.` `See TIME LIMIT TOO LATE ARRIVAL, TIME LIMIT TOO EARLY ARRIVAL, and TIME LIMIT NOT EARLY ENOUGH fields for definition of TOO LATE, TOO EARLY, and NOT EARLY ENOUGH.` NOTES: `XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER` CROSS-REFERENCE: `853.012^B` `1)= S ^VPS(853,DA(2),"PARAM",DA(1),"ARREASON","B",$E(X,1,30),DA)=""` `2)= K ^VPS(853,DA(2),"PARAM",DA(1),"ARREASON","B",$E(X,1,30),DA)` `This cross reference is for VPS CONFIG History AR INCOMPLETE REASON TYPE look up.`
1	LOW USE THRESHOLD AR	0;2	NUMBER	INPUT TRANSFORM: `K:+X'=X!(X>100)!(X<0)!(X?.E1"."3N.N) X` LAST EDITED: `JAN 08, 2015` HELP-PROMPT: `Type a number between 0 and 100, 2 decimal digits.` DESCRIPTION: `This is the percentage number that the system will use to monitor an acceptable level of AR non-completion. The acceptable level is determined by measuring this number against the mean number of AR non-completions` `for an AR incomplete reason type. e.g., out of 100 patient AR non-completions, 15 patients decide to bypass the review thus the mean number for this reason type is 15% and if the Low Use Threshold AR is set to 10%,` `the system will detect an unacceptable level of AR non-completions when too many patients are by- passing review.`

.01

AR INCOMPLETE REASON TYPE

0;1

SET

INPUT TRANSFORM: S DINUM=X Q
LAST EDITED: MAY 10, 2013
HELP-PROMPT: Choose AR Incomplete Reason Type.
DESCRIPTION: This field contains description of reason why AR module couldn't be completed.
The AR Incomplete Reason Type is one of the following:
1. The AR module could not be started because patient arrived TOO EARLY, TOO LATE, or NOT EARLY ENOUGH at the device. 2. Either the patient walked away in the middle of theAllergy Review or the TIME LIMIT AR
COMPLETE time expired. 3. The patient selected to exit the Allergy Review. 4. The patient selected to bypass the Allergy Review. 5. Service failure of VetLink at the site.
See TIME LIMIT TOO LATE ARRIVAL, TIME LIMIT TOO EARLY ARRIVAL, and TIME LIMIT NOT EARLY ENOUGH fields for definition of TOO LATE, TOO EARLY, and NOT EARLY ENOUGH.
NOTES: XXXX--CAN'T BE ALTERED EXCEPT BY PROGRAMMER
CROSS-REFERENCE: 853.012^B
1)= S ^VPS(853,DA(2),"PARAM",DA(1),"ARREASON","B",$E(X,1,30),DA)=""
2)= K ^VPS(853,DA(2),"PARAM",DA(1),"ARREASON","B",$E(X,1,30),DA)
This cross reference is for VPS CONFIG History AR INCOMPLETE REASON TYPE look up.

LOW USE THRESHOLD AR

0;2

NUMBER

INPUT TRANSFORM: K:+X'=X!(X>100)!(X<0)!(X?.E1"."3N.N) X
LAST EDITED: JAN 08, 2015
HELP-PROMPT: Type a number between 0 and 100, 2 decimal digits.
DESCRIPTION: This is the percentage number that the system will use to monitor an acceptable level of AR non-completion. The acceptable level is determined by measuring this number against the mean number of AR non-completions
for an AR incomplete reason type. e.g., out of 100 patient AR non-completions, 15 patients decide to bypass the review thus the mean number for this reason type is 15% and if the Low Use Threshold AR is set to 10%,
the system will detect an unacceptable level of AR non-completions when too many patients are by- passing review.

Customize PDF page

Package: VA Point of Service

VPS CONFIG HISTORY(#853)-->853.01-->853.012

Sub-Field: 853.012

Information

Details